Investigating the Process and Mechanism of Molecular Transport within a Representative Solvent-Filled Metal-Organic Framework

Decorating the Node of a Zirconium-Based Metal-Organic Framework to Tune Adsorption Behavior and Surface Permeation

Surface barriers are commonly observed in nanoporous materials. Although researchers have explored methods to repair defects or create flawless crystals to mitigate surface barriers, these approaches may not always be practical or readily achievable in targeted metal-organic frameworks (MOFs). In our study, we propose an alternative approach focusing on the introduction of diverse ligands onto a MOF-808 node to finely adjust its adsorption and mass transport characteristics. Significantly, our findings indicate that while adsorption curves can be inferred based on the MOF's chemical composition and the probing molecule, surface permeabilities exhibit variations dependent on the specific probe utilized and the incorporated ligand. Our investigation, considering van der Waals forces exclusively between the adsorbate (e.g., n-hexane, propane, and benzene) and the adsorbent, revealed that augmenting these interactions can indeed improve surface permeation to a certain extent. Conversely, strong adsorption resulting from hydrogen bonding interactions, particularly with water in modified MOFs, led to compromised permeation within the MOF crystals. These outcomes provide valuable insights for the porous materials community and offer guidance in the development of adsorbents with enhanced affinity and superior mass transport properties for gases and vapors.

Photoswitchable Radical State in Nanoporous Metal-Organic Framework Films with Embedded Hexaarylbiimidazole

Photoresponsive materials enable dynamic remote control of their fundamental properties. The incorporation of photochromic molecules in nanoporous metal-organic frameworks (MOFs) provides a unique opportunity to tailor the material properties, including the interaction between the MOF host and guest molecules in the pores. Here, a MOF film of type HKUST-1 with embedded hexaarylbiimidazole (HABI), undergoing reversible light-induced reactions between the stable dimer state and the metastable radical state, is presented. The switching between the dimer and radical form is shown by infrared, UV-vis, and electron paramagnetic resonance (EPR) spectroscopy. By transient uptake experiments with ethanol and methanol as probe molecules, we show that the dimer-radical switching impacts the host-guest interaction and, in particular, modifies the uptake amount and diffusion coefficient of the guest molecules. For ethanol, the diffusion slows down by 75%. This research presents the first MOF material with photoswitchable (meta)stable dimer and radical molecules, and it contributes to the advancement of photoresponsive nanoporous materials.

Harnessing Radicals in Confined Supramolecular Environments Made Possible by MOFs

Researching and utilizing radical intermediates in organic synthetic chemistry have innovated discoveries in methodology and theory. Reactions concerning free radical species opened new pathways beyond the frame of the two-electron mechanism while commonly characterized as rampant processes lacking selectivity. As a result, research in this field has always focused on the controllable generation of radical species and determining factors of selectivity. Metal-organic frameworks (MOFs) have emerged as compelling candidates as catalysts in radical chemistry. From a catalytic point of view, the porous nature of MOFs entails an inner phase for the reaction that could offer possibilities for the regulation of reactivity and selectivity. From a material science perspecti ve, MOFs are organic-inorganic hybrid materials that integrate functional units in organic compounds and complex forms in the tunable long-ranged periodic structure. In this account, we summarized our progress in the application of MOFs in radical chemistry in three parts: (1) The generation of radical species; (2) The weak interactions and site selectivity; (3) Regio- and stereo-selectivity. The unique role of MOFs play in these paradigms is demonstrated in a supramolecular narrative through the analyses of the multi-constituent collaboration within the MOF and the interactions between MOFs and the intermediates during the reactions.

Geometry and Chemistry: Influence of Pore Functionalization on Molecular Transport and Diffusion in Solvent-Filled Zirconium Metal-Organic Frameworks

Postsynthetic modification (PSM) of metal-organic frameworks (MOFs) enables incorporation of diverse functionalities in pores for chemical separations, drug delivery, and heterogeneous catalysis. However, the effect of PSM on molecular transport, which is essential for most applications of MOFs, has been rarely studied. In this paper, we used perfluoroalkane-functionalized Zr-MOF NU-1008 as a platform to systematically interrogate transport processes and mechanisms in solvated pores. We anchored perfluoroalkanes onto NU-1008 nodes by solvent-assisted ligand incorporation (SALI-n, with n = 3, 5, 7, and 9 denoting the number of fluorinated carbons). Transport of a luminescent molecule, BODIPY, through individual crystallites of four versions of methanol-filled SALI-n was monitored by confocal fluorescence microscopy as a function of time and location. In comparison with the parent NU-1008, the diffusivity of the probe molecules within SALI-n declined by 2- to 7-fold depending on chain length and loading, presumably due to the reduction in pore diameter or adsorptive interactions with perfluoroalkyl chains. Atomistic simulations were performed to uncover the microscopic behavior of the BODIPY diffusion in SALI-n. The perfluoroalkyl chains are observed to stay close to the pore walls, instead of extending toward the pore center. BODIPY molecules, which preferably interact with linkers, were pushed to the interior of the channels as the chain length increased, resulting in solvated diffusion and minor differences in the short-time mobility of BODIPY in SALI-n. This suggested that the observed decline of transport diffusivity in SALI-n mainly stemmed from the reduction in the pore size when these flexible chains are present. We anticipate that this proof of concept will assist in understanding how pore functionalization can physically and chemically affect mass transport in MOFs and will be useful in further guiding the design of PSM to realize the optimal performance of MOFs for various applications.

In Situ Observation of Solvent Exchange Kinetics in a MOF with Coordinatively Unsaturated Sites

Solvent exchange of synthesis solvent within metal-organic frameworks (MOFs) is an essential process for the activation of coordinatively unsaturated sites (CUS) to achieve an optimal surface area; activation of the CUS is required to exploit the versatile applications of MOFs. However, it is challenging to replace CUS-bound synthesis solvent prior to MOF activation, which can lead to a structural collapse and reduced surface area post-evacuation. Herein, we quantify the exchange behavior of a copper paddlewheel-based CUS-MOF (HKUST-1) in the presence of three different solvents: ethanol (EtOH), dichloromethane (DCM), and N,N-dimethylformamide (DMF). The DMF release profiles are monitored via in situ observation of the exchange solvent composition via 1H NMR and Raman spectroscopy at the macroscopic scale. Furthermore, the change in solvent within a single crystal is measured to directly elucidate the exchange behavior. We demonstrate the DMF release profile from HKUST-1 exhibits different rate laws depending on whether the solvent exchange occurs at the CUS or is purely diffusive through the pores. This contribution represents the first characterization of release from a CUS-MOF as a function exchange solvent and reveals that solvent exchange in a CUS-MOF is not diffusion-limited, but rather is limited by the solvent exchange kinetics at the metal center. Insights from this study can be generalized to the variety of copper-paddlewheel-based MOFs, informing best practices for solvent exchange.

Water-Accelerated Transport: Vapor-Phase Nerve Agent Simulant Delivery within a Catalytic Zirconium Metal-Organic Framework as a Function of Relative Humidity

Zirconium-based metal-organic frameworks (MOFs) are candidate materials for effective nerve agent detoxification due to their thermo- and water stability as well as high density of catalytic Zr sites. However, as high-porosity materials, most of the active sites of Zr-MOFs can only be accessed by diffusion into the crystal interior. Therefore, the transport of nerve agents in nanopores is an important factor in the catalytic performance of Zr-MOFs. Here, we investigated the transport process and mechanism of a vapor-phase nerve agent simulant, dimethyl methyl phosphonate (DMMP), through a representative Zr-MOF, NU-1008, under practical conditions of varying humidity. Confocal Raman microscopy was used to monitor the transport of DMMP vapor through individual NU-1008 crystallites, where the relative humidity (RH) of the environment was tuned to understand the impact of water. Counterintuitively, water in the MOF channels, instead of blocking DMMP transport, assists DMMP diffusion; indeed, the transport diffusivity (D_t) of DMMP in NU-1008 is one order of magnitude higher at 70% than 0% RH. To understand the mechanism, magic angle spinning NMR and molecular dynamics simulations were performed and suggested that high water content in the channels prevents DMMP from hydrogen-bonding with the nodes, allowing for faster diffusion of DMMP in the channels. The simulated self-diffusivity (D_s) of DMMP is observed to be concentration-dependent. At low loading of DMMP, D_s is higher at 70% RH than 0% RH, while at high loadings the trend reverses due to the DMMP aggregation in water and the reduction of free volume in channels.

Molecular Catalysis of Energy Relevance in Metal-Organic Frameworks: From Higher Coordination Sphere to System Effects

The modularity and synthetic flexibility of metal-organic frameworks (MOFs) have provoked analogies with enzymes, and even the term MOFzymes has been coined. In this review, we focus on molecular catalysis of energy relevance in MOFs, more specifically water oxidation, oxygen and carbon dioxide reduction, as well as hydrogen evolution in context of the MOF-enzyme analogy. Similar to enzymes, catalyst encapsulation in MOFs leads to structural stabilization under turnover conditions, while catalyst motifs that are synthetically out of reach in a homogeneous solution phase may be attainable as secondary building units in MOFs. Exploring the unique synthetic possibilities in MOFs, specific groups in the second and third coordination sphere around the catalytic active site have been incorporated to facilitate catalysis. A key difference between enzymes and MOFs is the fact that active site concentrations in the latter are often considerably higher, leading to charge and mass transport limitations in MOFs that are more severe than those in enzymes. High catalyst concentrations also put a limit on the distance between catalysts, and thus the available space for higher coordination sphere engineering. As transport is important for MOF-borne catalysis, a system perspective is chosen to highlight concepts that address the issue. A detailed section on transport and light-driven reactivity sets the stage for a concise review of the currently available literature on utilizing principles from Nature and system design for the preparation of catalytic MOF-based materials.

Conceptual and Practical Aspects of Metal-Organic Frameworks for Solid-Gas Reactions

The presence of site-isolated and well-defined metal sites has enabled the use of metal-organic frameworks (MOFs) as catalysts that can be rationally modulated. Because MOFs can be addressed and manipulated through molecular synthetic pathways, they are chemically similar to molecular catalysts. They are, nevertheless, solid-state materials and therefore can be thought of as privileged solid molecular catalysts that excel in applications involving gas-phase reactions. This contrasts with homogeneous catalysts, which are overwhelmingly used in the solution phase. Herein, we review theories dictating gas phase reactivity within porous solids and discuss key catalytic gas-solid reactions. We further treat theoretical aspects of diffusion within confined pores, the enrichment of adsorbates, the types of solvation spheres that a MOF might impart on adsorbates, definitions of acidity/basicity in the absence of solvent, the stabilization of reactive intermediates, and the generation and characterization of defect sites. The key catalytic reactions we discuss broadly include reductive reactions (olefin hydrogenation, semihydrogenation, and selective catalytic reduction), oxidative reactions (oxygenation of hydrocarbons, oxidative dehydrogenation, and carbon monoxide oxidation), and C-C bond forming reactions (olefin dimerization/polymerization, isomerization, and carbonylation reactions).

Organocatalytic Polymers from Affordable and Readily Available Building Blocks for the Cycloaddition of CO2 to Epoxides

The catalytic cycloaddition of CO₂ to epoxides to afford cyclic carbonates as useful monomers, intermediates, solvents, and additives is a continuously growing field of investigation as a way to carry out the atom-economic conversion of CO₂ to value-added products. Metal-free organocatalytic compounds are attractive systems among various catalysts for such transformations because they are inexpensive, nontoxic, and readily available. Herein, we highlight and discuss key advances in the development of polymer-based organocatalytic materials that match these requirements of affordability and availability by considering their synthetic routes, the monomers, and the supports employed. The discussion is organized according to the number (monofunctional versus bifunctional materials) and type of catalytically active moieties, including both halide-based and halide-free systems. Two general synthetic approaches are identified based on the postsynthetic functionalization of polymeric supports or the copolymerization of monomers bearing catalytically active moieties. After a review of the material syntheses and catalytic activities, the chemical and structural features affecting catalytic performance are discussed. Based on such analysis, some strategies for the future design of affordable and readily available polymer-based organocatalysts with enhanced catalytic activity under mild conditions are considered.

A Potential Roadmap to Integrated Metal Organic Framework Artificial Photosynthetic Arrays

Metal organic frameworks (MOFs), a class of coordination polymers, gained popularity in the late 1990s with the efforts of Omar Yaghi, Richard Robson, Susumu Kitagawa, and others. The intrinsic porosity of MOFs made them a clear platform for gas storage and separation. Indeed, these applications have dominated the vast literature in MOF synthesis, characterization, and applications. However, even in those early years, there were hints to more advanced applications in light-MOF interactions and catalysis. This perspective focuses on the combination of both light-MOF interactions and catalysis: MOF artificial photosynthetic assemblies. Light absorption, charge transport, H2O oxidation, and CO2 reduction have all been previously observed in MOFs; however, work toward a fully MOF-based approach to artificial photosynthesis remains out of reach. Discussed here are the current limitations with MOF-based approaches: diffusion through the framework, selectivity toward high value products, lack of integrated studies, and stability. These topics provide a roadmap for the future development of fully integrated MOF-based assemblies for artificial photosynthesis.

BODIPY based Metal-Organic Macrocycles and Frameworks: Recent Therapeutic Developments

Boron dipyrromethene, commonly known as BODIPY, based metal-organic macrocycles (MOCs) and metal-organic frameworks (MOFs) represent an interesting part of materials due to their versatile tunability of structure and functionality as well as significant physicochemical properties, thus broadening their applications in various scientific domains, especially in biomedical sciences. With increasing concern over the efficacy of cancer drugs versus quality of patient's life dilemma, scientists have been trying to fabricate novel comprehensive therapeutic strategies along with the discovery of novel safer drugs where research with BODIPY metal complexes has shown vital advancements. In this review, we have exclusively examined the articles involving studies related to light harvesting and photophysical properties of BODIPY based MOCs and MOFs, synthesized through self-assembly process, with a special focus on biomolecular interaction and its importance in anti-cancer drug research. In the end, we also emphasized the possible practical challenges involved during the synthetic process, based on our experience on dealing with BODIPY molecules and steps to overcome them along with their future potentials. This review will significantly help our fellow research groups, especially the budding researchers, to quickly and comprehensively get the near to wholesome picture of BODIPY based MOCs and MOFs and their present status in anti-cancer drug discovery.

MOF-enabled confinement and related effects for chemical catalyst presentation and utilization

A defining characteristic of nearly all catalytically functional MOFs is uniform, molecular-scale porosity. MOF pores, linkers and nodes that define them, help regulate reactant and product transport, catalyst siting, catalyst accessibility, catalyst stability, catalyst activity, co-catalyst proximity, composition of the chemical environment at and beyond the catalytic active site, chemical intermediate and transition-state conformations, thermodynamic affinity of molecular guests for MOF interior sites, framework charge and density of charge-compensating ions, pore hydrophobicity/hydrophilicity, pore and channel rigidity vs. flexibility, and other features and properties. Collectively and individually, these properties help define overall catalyst functional behaviour. This review focuses on how porous, catalyst-containing MOFs capitalize on molecular-scale confinement, containment, isolation, environment modulation, energy delivery, and mobility to accomplish desired chemical transformations with potentially superior selectivity or other efficacy, especially in comparison to catalysts in homogeneous solution environments.

Synchronous Construction of the Hierarchical Pores and High Hydrophobicity of Stable Metal-Organic Frameworks through a Dual Coordination-Competitive Strategy

Hierarchical-pore construction and functionalities are critical to further extend the applications of some stable MOFs, such as water remediation, fuel purification, oil/water separation, and self-cleaning, which are rarely achieved simultaneously. Herein, we demonstrate a method of synchronously constructing high-hydrophobicity Zr-based metal-organic frameworks with hierarchical pores (HP-UiO-66) through a dual coordination-competitive strategy. The addition of alkanoic acids and Zn²⁺ ions as coordination-competitors could reduce the coordinative degree between the ligand and Zr⁴⁺ ions to effectively induce defect formation. The resulting unsaturated Zr⁴⁺ ions could fully combine with the existing alkanoic acid with a long chain to afford HP-UiO-66 with high-hydrophobicity characteristics. In addition, the particle size of pristine UiO-66 could be adjusted effectively from around 280 to 120 nm using different alkanoic acids when Zn²⁺ ions are not added. This study provided a simple way for effectively controlling the morphology and structure of UiO-66 at the same time. Moreover, this kind of high-hydrophobicity HP-UiO-66 showed potential applications in oil/water separation and selective adsorption of organic mixtures.

Nanoconfinement and mass transport in metal-organic frameworks

The ubiquity of metal-organic frameworks in recent scientific literature underscores their highly versatile nature. MOFs have been developed for use in a wide array of applications, including: sensors, catalysis, separations, drug delivery, and electrochemical processes. Often overlooked in the discussion of MOF-based materials is the mass transport of guest molecules within the pores and channels. Given the wide distribution of pore sizes, linker functionalization, and crystal sizes, molecular diffusion within MOFs can be highly dependent on the MOF-guest system. In this review, we discuss the major factors that govern the mass transport of molecules through MOFs at both the intracrystalline and intercrystalline scale; provide an overview of the experimental and computational methods used to measure guest diffusivity within MOFs; and highlight the relevance of mass transfer in the applications of MOFs in electrochemical systems, separations, and heterogeneous catalysis.