High-Quality Carbon Nitride Quantum Dots on Photoluminescence: Effect of Carbon Sources

Inhibitory effects of Curcumae Radix carbonisata-based carbon dots against liver fibrosis induced by carbon tetrachloride in mice

As a processed product of traditional Chinese medicine Curcumae Radix, Curcumae Radix Carbonisata (CRC) has been widely used in the treatment of liver diseases in ancient medical books. In this study, novel carbon dots (CDs) extending from 1.0 to 4.5 nm were separated from fluid extricates of CRC. Meanwhile, a liver fibrosis model induced by carbon tetrachloride (CCl4) was utilized to determine the inhibitory effects of CRC-CDs against liver fibrosis. The results exhibited the CRC-CDs with a quantum yield of 1.34% have a significant inhibitory effect on CCl4-induced liver fibrosis, as demonstrated by improving hepatocyte degeneration and necrosis, inflammatory cell infiltration and fibrotic tissue hyperplasia, downregulating the levels of alanine transaminase (ALT), aspartate aminotransferase (AST), total bilirubin (TBIL), direct bilirubin (DBIL), total bile acid (TBA), triglyceride (TG), tumour necrosis factor-α (TNF-α), interleukin (IL)-6 and IL-1β in the serum, upregulating the contents of superoxide dismutase (SOD), reduced glutathione (GSH), and downregulating the concentration of malondialdehyde (MDA), which lays an important foundation for the development of CRC-CDs as a novel drug for the treatment of liver fibrosis, and provide a certain experimental basis for the clinical application of CRC-CDs in the future.

Construction of a fluorescence switch sensor of Mn doped AgInS2 quantum dots for the detection of Fe (III) and ascorbic acid

The convenience and high efficiency of recently developed I-III-VI group AgInS2 (AIS) fluorescence sensors have garnered considerable attention. In this study, glutathione (GSH) was employed as a stabilizer to synthesize Mn doped AgInS2 quantum dots (Mn-AIS QDs) via a one-step hydrothermal method at a lower temperature. The resultant samples displayed favorable photoluminescent characteristics and excellent water dispersibility. The photoluminescence of Mn-AIS QDs is quenched by Fe (III) via a photo-induced electron transfer mechanism (PET), and this quenching can be reversed by ascorbic acid (AA) as a result of the redox reaction between the Mn-AIS-Fe (III) complex and AA. Utilizing the on-off-on fluorescence principle, a fluorescence switch sensor based on Mn-AIS QDs was developed for the detection of Fe (III) and AA. The linear range for the detection of Fe (III) using the Mn-AIS QDs sensor was established to be 0.03-120 µM, with a detection limit (LOD) of 0.16 nM. For the detection of AA within the Mn-AIS-Fe (III) system, the linear range spanned from 0.05 to 180 µM, with a LOD of 0.031 µM. Both Mn-AIS and Mn-AIS-Fe (III) demonstrated robust anti-interference properties, facilitating the accurate detection of Fe (III) in tap water and AA in vitamin C tablets. This approach is notable for its simplicity, cost-effectiveness, and considerable potential for application in the creation of innovative biological and environmental sensors.

A novel strategy for enhancing the stability of aptamer conformations in heavy metal ion detection

BACKGROUND

Detection methods based on aptamer probes have great potential and progress in the field of rapid detection of heavy metal ions. However, the unstable conformation of aptamers often results in poor sensitivity due to the dissociation of aptamer-target complex in real environments.

RESULTS

In this study, we developed a locking aptamer probe and combined it with AgInZnS quantum dots for the first time to detect cadmium ions. When cadmium ions are combined with the probe, the cadmium ions are fixed in the core-locking position, forming a stable cavity structure. The limit of detection (LOD) was achieved at a concentration of 6.9 nmol L-1, with a broad detection range from 10 nmol L-1 to 1000 μmol L-1, and good recovery rates (92.93%-102.8 %) were achieved in aquatic product testing. The locking aptamer probe with stable conformation effectively enhances the stability of the aptamer-target complex and remains good stability in four buffer environments as well as a 600 mmol L-1 salt solution; it also exhibits good stability at pH 6.5-7.5 and temperatures ranging from 25 °C to 35 °C.

SIGNIFICANCE

Overall, our study presented a general, simple, and cost-effective strategy for stabilizing aptamer conformations, and used for highly sensitive detection of cadmium ions.

Ultrasensitive detection of Ag+and Ce3+ions using highly fluorescent carboxyl-functionalized carbon nitride nanoparticles

The fluorescence quenching of carboxyl-rich g-C3N4nanoparticles was found to be selective to Ag+and Ce3+with a limit of detection as low as 30 pM for Ag+ions. A solid-state thermal polycondensation reaction was used to produce g-C3N4nanoparticles with distinct green fluorescence and high water solubility. Dynamic light scattering indicated an average nanoparticle size of 95 nm. The photoluminescence absorption and emission maxima were centered at 405 nm and 540 nm respectively which resulted in a large Stokes shift. Among different metal ion species, the carboxyl-rich g-C3N4nanoparticles were selective to Ag+and Ce3+ions, as indicated by strong fluorescence quenching and a change in the fluorescence lifetime. The PL sensing of heavy metal ions followed modified Stern-Volmer kinetics, and CNNPs in the presence of Ag+/Ce3+resulted in a higher value ofKapp(8.9 × 104M-1) indicating a more efficient quenching process and stronger interaction between CNNP and mixed ions. Sensing was also demonstrated using commercial filter paper functionalized with g-C3N4nanoparticles, enabling practical on-site applications.

Carbon nitride quantum dots-modified cobalt phosphate for enhanced photocatalytic H2 evolution

In the present work, carbon nitride quantum dots (CNQDs)-modified cobalt phosphate (CoPi) composites CNQDs/CoPi-x (x = 1, 2, 3) were prepared at room temperature and characterized by FTIR, XRD, UV-Vis DRS, EIS, SEM, TEM/HR-TEM, XPS, and N2 gas adsorption. The morphologies and surface areas of CNQDs/CoPi-x have no remarkable change after modification of CNQDs, compared with pure CoPi. The obtained CNQDs/CoPi-x shows enhanced activity and stability of photocatalytic H2 evolution compared to pure CoPi using Eosin Y (EY) as a sensitizer and triethanolamine as an electron donor. The CNQDs/CoPi-2 possesses the highest hydrogen evolution rate, 234.5 μmol h-1  g-1 , upon visible light, which outshines that of CoPi by 2.4 times. It was believed that the enhanced photocatalytic performances of the CNQDs/CoPi-2 could result from the boosted electron transfer from radical EY·- to CNQDs/CoPi-2 by the employment of CNQDs; in addition, the visible-light activity of CNQDs contributes to hydrogen evolution. The mechanism of photocatalytic hydrogen production was discussed. This study may contribute toward the development of production of "green hydrogen" using solar.

A Direct-Contact Photocurrent-Direction-Switching Biosensing Platform Based on In Situ Formation of CN QDs/TiO2 Nanodiscs and Double-Supported 3D DNA Walking Amplification

Herein, a direct-contact photocurrent-direction-switching photoelectrochemical (PEC) biosensing platform for the ultrasensitive and selective detection of soluble CD146 (sCD146) is reported for the first time via in situ formation of carbon nitride quantum dots (CN QDs)/titanium dioxide (TiO2 ) nanodiscs with the double-supported 3D DNA walking amplification. In this platform, metal organic frameworks (MOFs)-derived porous TiO2 nanodiscs exhibit excellent anodic photocurrent, whereas a single-stranded auxiliary DNA (ssDNA) as biogate is absorbed onto the TiO2 nanodiscs to block active sites. Subsequently, with the help of intermediate DNAs from target sCD146-induced double-supported 3D DNA walking signal amplification, the ssDNA can leave away from the surface of TiO2 nanodiscs due to the specific hybridization with intermediate DNAs. Afterward, the successful direct contact of CN QDs on TiO2 nanodiscs by porosity and electrostatic adsorption, leads to the effective photocurrent-direction switching from anodic to cathodic photocurrent. Based on direct-contact photocurrent-direction-switching CN QDs/TiO2 nanodiscs system and double-supported 3D DNA walking signal amplification, sCD146 is detected sensitively with a wide linear range (10 fg mL-1 to 5 ng mL-1 ) and a low limit of detection (2.1 fg mL-1 ). Also, the environmentally friendly and direct-contact photocurrent-direction-switching PEC biosensor has an application prospect for cancer biomarker detection.

Carbon Quantum Dots with High Photothermal Conversion Efficiency and Their Application in Photothermal Modulated Reversible Deformation of Poly(N-isopropylacrylamide) Hydrogel

The fluorescence of carbon quantum dots (CQDs) has been paid a lot of attention, but its photothermal performance attracts less attention since preparing CQDs with high photothermal conversion efficiency (PCE) is a big challenge. In this work, CQDs with an average size of 2.3 nm and a PCE of up to 59.4% under 650 nm laser irradiation were synthesized by a simple one-pot microwave-assisted solvothermal method using citric acid (CA) and urea (UR) as the precursors and N,N-dimethylformamide as the solvent under an optimized condition (CA/UR = 1/7, 150 °C, and 1 h). The as-prepared CQDs were demonstrated to have unique surface chemical states; i.e., abundant pyrrole, amide, carboxyl, and hydroxyl groups were found on the surfaces of CQDs, which ensure a high PCE. These CQDs were introduced into a thermoresponsive poly(N-isopropylacrylamide) (PNIPAM) to form a CQDs@PNIPAM nanocomposite, and then, a bilayer hydrogel composed of CQDs@PNIPAM and polyacrylamide (PAM) was fabricated. The bilayer hydrogel can be reversibly deformed just by a light switching on/off operation. Based on the excellent photothermal performance, the developed CQDs are expected to be used in photothermal therapy, photoacoustic imaging, and other biomedical fields, and the CQDs@PNIPAM hydrogel nanocomposite is promising to be applied in intelligent device systems as a light-driven smart flexible material.

Green synthetic natural carbon dots derived from Fuligo Plantae with inhibitory effect against alcoholic gastric ulcer

Introduction: Fuligo Plantae (FP), the ash that sticks to the bottom of pots or chimneys after weeds burn, has long been used for its hemostatic effects and treatment of gastrointestinal bleeding. Nevertheless, the active ingredient of FP still needs to be further explored. Methods: The microstructure, optical and chemical properties of FP-CDs were characterized. An alcohol-induced gastric ulcer model was utilized to evaluate whether pre-administration of FP-CDs alleviated gastric bleeding symptoms and ameliorated gastric mucosal barrier disruption. In addition, the feces of each group of rats were extracted for 16S rDNA genome sequencing of intestinal flora. Results: FP-CDs with a diameter ranging from 1.4-3.2 nm had abundant chemical groups, which may be beneficial to the exertion of inherent activity. FP-CDs alleviated alcohol-induced gastric ulcer, as demonstrated by activating the extrinsic coagulation pathway, alleviating inflammation, and suppressing oxidative stress levels. More interestingly, FP-CDs can improve the diversity and dysbiosis of intestinal flora in rats with alcohol-induced gastric ulcer. Conclusion: These comes about illustrate the momentous inhibitory effects of FP-CDs on alcoholic gastric ulcer in rats, which give a modern methodology for investigating the effective ingredient of FP, and lay an experimental basis for the application of FP-CDs in the clinical treatment of alcoholic gastric ulcer.

Engineering the Surface Chemistry and Morphology of Polymeric Carbon Nitrides Towards Greener Heterogeneous Catalysts for Biodiesel Synthesis

Biodiesel remains one of the most promising alternatives to replace fossil fuel-derived petrodiesel. Nonetheless, conventional biodiesel synthesis relies on homogeneous alkali-based catalysts that involve long and tedious purification steps , increasing biodiesel production costs. Heterogeneous catalysts have emerged as promising alternatives to circumvent these drawbacks, as they can easily be recovered and reused. Herein, polymeric carbon nitride dots and nanosheets are synthesized through a solid-phase reaction between urea and sodium citrate. Their morphology and surface chemistry are tuned by varying the precursor's ratio, and the materials are investigated as catalysts in the transesterification reaction of canola oil to biodiesel. A conversion of > 98% is achieved using a 5 wt% catalyst loading, oil to methanol ratio of 1:36 at 90 °C for 4 h, with the performance maintained over at least five reuse cycles. In addition, the effect of the transesterification reaction parameters on the reaction kinetics is evaluated, which follows a pseudo-first-order (PFO) regime. Combined with a deep understanding of the catalyst's surface, these results have allowed us to propose a reaction mechanism similar to the one observed for homogenous alkali catalysts. These carbon nitride-based nanoparticles offer a metal-free and cost-effective alternative to conventional homogeneous and metal-based heterogeneous catalysts.

Sensitive acid phosphatase assay based on light-activated specific oxidase mimic activity

Acid phosphatase (ACP) is a key marker in the diagnosis of many diseases. However, exploiting a simple and sensitive sensor for the real-time quantitative analysis of ACP is still challenging. Herein, we attempted to develop a sensitive colorimetric sensing strategy for the detection of ACP based on light-activated oxidase mimic property of carbon dots (CDs). The synthesized CDs were proved to be capable of intrinsic light-activated oxidase mimic activity, which could generate reactive oxygen species to oxidize chromogenic substrate under ultraviolet light stimulation. Interestingly, this light-activated oxidase mimic behavior would be effectively suppressed by the antioxidant ascorbic acid (AA), a product from the hydrolysis of 2-phospho-L-ascorbic acid trisodium (AAP) mediated by ACP. Based on the above property, a facile and sensitive colorimetric sensing method for ACP was developed. Under the optimal conditions, the linear range for ACP 0.1-5.5 U/L, and the detection limit was 0.056 U/L. Compared with conventional nanozyme based ACP assay systems, the catalytic activity of light-activated nanozyme could be conveniently regulated by switching the light on and off, which made it easier to precisely control the extent of the reaction and ensured the accuracy of the assay. In addition, the proposed sensing system would be readout directly by the naked eye or smartphone-based RGB analysis system, and have been successfully applied to analyze diluted in diluted fetal bovine serum and urine samples spiked with ACP. All these results indicated that this approach holds good promise for future applications in clinical analysis and point-of-care (POC) biosensor platforms.

Development of High-Performance Polymer Electrolyte Membranes through the Application of Quantum Dot Coatings to Nafion Membranes

Proton exchange membrane water electrolysis (PEMWE) generates oxygen and hydrogen at the anode and cathode, respectively, by conducting protons generated at the anode to the cathode through a proton exchange membrane (PEM). The performance of PEMWE can be improved with faster catalytic reactions at each electrode; thus, the development of a PEM with excellent ionic conductivity and physicochemical stability is essential. Nafion, a type of perfluoro-sulfonic acid polymer, is the most widely used PEM material. However, despite its excellent conductivity and chemical stability, it exhibits high hydrogen permeability due to its structural characteristics. Quantum dots (QDs) have a hydrophilic functional group that can act as an ion conductor and are extremely compatible with the hydrophilic cluster of Nafion due to their characteristic nanosized structure. In this study, various compositions of N-doped carbon quantum dots (CQDs) containing hydrophilic functional groups were coated on a Nafion-212 membrane. The resulting series of CQD-coated Nafion membranes exhibited improvements in morphology and ionic conductivity as well as reductions in hydrogen permeability. In particular, the Nafion membrane coated with 0.75 wt % of N-doped CQD (CQD-cNafion-0.75) exhibited improved mechanical properties and higher oxidation stability compared to Nafion-212. It also displayed higher ionic conductivity of 240.3 mS cm^-1 at 80 °C and reduced hydrogen permeability (about 10% reduction) compared to Nafion-212. In addition, the performance of single-cell PEMWE using the CQD-cNafion-0.75 membrane was found to be approximately 1.2 times higher than Nafion-212.

Peptide-modified carbon dot aggregates for ultrasensitive detection of lipopolysaccharide through aggregation-induced emission enhancement

This study fabricated yellow-emitting CDs (Y-CDs) by hydrothermal treatment of citric acid and urea and applied them as a fluorescence turn-on platform for sensitive and selective detection of lipopolysaccharide (LPS) based on the non-shifted AIEE of peptide-stabilized CD aggregates. The designed peptide (named K3) consisting of aggregation-active and LPS-recognition units triggered the aggregation of Y-CDs, switching on their fluorescence through the blue-shifted AIEE process. The formed K3-stabilized Y-CD aggregates (K3-YCDAs) specifically interacted with LPS at neutral pH, demonstrating that the sequence of the decorated peptide was highly connected with their selectivity and sensitivity. The K3-YCDAs provided a fast response time (within 5 min) to detect LPS with a quantification range of 0.5-100.0 nM and a limit of detection (LOD, signal-to-noise ratio of 3) of 300.0 pM. By integrating ultrafiltration membranes as a concentration device with K3-YCDAs as a sensing probe, the LOD for LPS was further reduced to 3.0 pM. The determination of picomolar levels of plasma LPS by the K3-YCDAs coupled to the centrifugation ultrafiltration was demonstrated to fall within the specificity range of clinical interest for sepsis patients. Also, the K3-YCDAs served as a fluorescent probe to selectively image and quantify E. coli cells. The distinct advantages of the K3-YCDAs for LPS include fast response time, wide linear range, low detection limit, and excellent selectivity compared to previously reported sensors.

Structure-Activity Relationship of Carbon Nitride Dots in Inhibiting Tau Aggregation

Due to the numerous failed clinical trials of anti-amyloid drugs, microtubule associated protein tau (MAPT) now stands out as one of the most promising targets for AD therapy. In this study, we report for the first time the structure-dependent MAPT aggregation inhibition of carbon nitride dots (CNDs). CNDs have exhibited great promise as a potential treatment of Alzheimer's disease (AD) by inhibiting the aggregation of MAPT. In order to elucidate its structure-activity relationship, CNDs were separated via column chromatography and five fractions with different structures were obtained that were characterized by multiple spectroscopy methods. The increase of surface hydrophilic functional groups is consistent with the increase of polarity from fraction 1 to 5. Particle sizes (1-2 nm) and zeta potentials (~-20 mV) are similar among five fractions. With the increase of polarity from fraction 1 to 5, their MAPT aggregation inhibition capacity was weakened. This suggests hydrophobic interactions between CNDs and MAPT, validated via molecular dynamics simulations. With a zebrafish blood-brain barrier (BBB) model, CNDs were observed to cross the BBB through passive diffusion. CNDs were also found to inhibit the generation of multiple reactive oxygen species, which is an important contributor to AD pathogenesis.

Highly-fluorescent carbon dots grown onto dendritic silica nanospheres for anthrax protective antigen detection

Direct synthesis of carbon dots on uniform mesoporous nanospheres is an ideal way to impart fluorescence properties to the nanomaterials and retain its original uniformity. Carbon dot-based nanospheres with high quantum yield (aqueous solution, 89.3%) were synthesized by the one-step hydrothermal treatment of sodium citrate and dendritic silica spheres grafted with N-β-(aminoethyl)-γ-aminopropyltrimethoxysilane. Its excellent chemical properties such as fluorescence, stability, homogeneity and dispersion enable it to achieve a sensitive, specific, rapid and low-cost detection of anthrax protective antigen when used as a signal for immunochromatography.

One-Pot Hydrothermal Synthesized Nitrogen and Sulfur Codoped Carbon Dots for Acid Corrosion Inhibition of Q235 Steel

N and S codoped carbon dots having good water solubility have been successfully made by a novel hydrothermal method and characterized by FTIR, XPS, and TEM. The as-synthesized CDs were carbon particles rich in polar functional groups less than 10 nm in size. Electrochemical measurements, gravimetry, and surface analysis methods were utilized to examine the inhibition characteristics and adsorption mechanism of CDs on the carbon steel in acid pickling solutions. Electrochemical measurements verified that the CDs displayed adequate protection with high inhibition efficiency of 97.8%. The long-term weight-loss experiments up to 72 h further confirmed the excellent corrosion inhibition at room temperature and 313 K. The results presented are helpful for the formulation of more effective acid pickling corrosion inhibitors.

In Vitro Study: Synthesis and Evaluation of Fe3O4/CQD Magnetic/Fluorescent Nanocomposites for Targeted Drug Delivery, MRI, and Cancer Cell Labeling Applications

In the present study, first, Fe₃O₄ nanoparticles were functionalized using glutaric acid and then composited with CQDs. Doxorubicin (DOX) drug was loaded to evaluate the performance of the nanocomposite for targeted drug delivery applications. The XRD pattern confirmed the presence of characteristic peaks of CQDs and Fe₃O₄. In the FTIR spectrum, the presence of carboxyl functional groups on Fe₃O₄/CQDs was observed; DOX (positive charge) is loaded onto Fe₃O₄/CQDs (negative charge) by electrostatic absorption. FESEM and AFM images showed that the particle sizes of Fe₃O₄ and CQDs were 23-75 and 1-3 nm, respectively. The hysteresis curves showed superparamagnetic properties for Fe₃O₄ and Fe₃O₄/CQDs (57.3 and 8.4 emu/g). The Fe₃O₄ hysteresis curve showed superparamagnetic properties (Ms and Mr: 57.3 emu/g and 1.46 emu/g. The loading efficiency and capacity for Fe₃O₄/CQDs were 93.90% and 37.2 mg DOX/g MNP, respectively. DOX release from Fe₃O₄/CQDs in PBS showed pH-dependent release behavior where after 70 h at pH 5 and 7.4, about 50 and 21% of DOX were released. Fluorescence images of Fe₃O₄/CQD-treated cells showed that Fe₃O₄/CQDs are capable of labeling MCF-7 and HFF cells. Also, T₂-weighted MRI scans of Fe₃O₄/CQDs in water exhibited high r₂ relaxivity (86.56 mM^-1 S^-1). MTT assay showed that DOX-loaded Fe₃O₄/CQDs are highly biocompatible in contact with HFF cells (viability = 95%), but they kill MCF-7 cancer cells (viability = 45%). Therefore, the synthesized nanocomposite can be used in MRI, targeted drug delivery, and cell labeling.

Fabrication of g-C3N4/Bi2WO6 as a direct Z-scheme excellent photocatalyst

To improve the photocatalytic efficiency of Bi2WO6, two types of g-C3N4 nanomaterial, g-C3N4 quantum dots and nanosheets, were incorporated with Bi2WO6 to construct two kinds of g-C3N4/Bi2WO6 photocatalysts with excellent photocatalytic activity.

Insights into the newly synthesized N-doped carbon dots for Q235 steel corrosion retardation in acidizing media: A detailed multidimensional study

N-doped carbon quantum dots (NCQDs) were synthesized by a hydrothermal method using folic acid and o-phenylenediamine as precursors. The inhibition behaviour of the NCQDs on Q235 steel in 1 M HCl solution was appraised through electrochemical impedance spectroscopy (EIS), potentiodynamic polarization curves (PDP), and surface analysis. The results demonstrated that the synthesized NCQDs had an effective anticorrosion effect on Q235 steel, and the corrosion inhibition efficiency of 150 mg/L NCQDs reached 95.4%. Additionally, the analysis of the PDP corrosion potential changes indicated that the NCQDs acted as a mixed corrosion inhibitor. Moreover, the NCQDs adsorbed onto the surface of steel by coordinating its electron-rich atoms with the iron metal to form a protective film, which slowed the dissolution reaction of the anodic metal to achieve corrosion inhibition. The adsorption mechanism of the NCQDs was consistent with Langmuir adsorption, including physical and chemical adsorption. Therefore, this work can inspire and facilitate, to a certain extent, the future application of doped carbon quantum dots as efficient corrosion inhibitors in pickling solutions.

Fabrication of recyclable reduced graphene oxide/graphitic carbon nitride quantum dot aerogel hybrids with enhanced photocatalytic activity

Recyclable photocatalysts that can efficiently respond to visible light must be developed for practical application. Herein, three-dimensional (3D) reduced graphene oxide (rGO)/graphitic carbon nitride quantum dot (CNQD) aerogel hybrids for harvesting visible light were synthesized via a hydrothermal method. The graphitic CNQDs were not only decorated on but also integrated onto the surface of rGO. The CNQDs produced photogenerated charge under visible light. 3D rGO could serve as an acceptor of the photogenerated electrons and stereoscopically facilitated the charge transfer through aerogel networks owing to its high conductivity. The ciprofloxacin removal ratio of the aerogel hybrids was about 6.1 times higher than that of bulk g-C₃N₄.

Recyclable photocatalysts that can efficiently respond to visible light must be developed for practical application.

Solvent Effects on Fluorescence Properties of Carbon Dots: Implications for Multicolor Imaging

Carbon dots (CDs) are synthesized by the solvothermal method with four kinds of solvents including water, dimethylformamide (DMF), ethanol, and acetic acid (AA). The aqueous solutions of the above CDs emit multiple colors of blue (470 nm), green (500 nm), yellow (539 nm), and orange (595 nm). The structures, sizes, and chemical composition of the CDs are characterized by transmission electron microscopy (TEM), dynamic light scattering (DLS), X-ray diffraction (XRD), Fourier transform infrared (FTIR), and X-ray photoelectron spectroscopy (XPS). The optical properties of multicolored CDs are analyzed by UV-vis absorption and photoluminescence (PL) spectra. It has been revealed that DMF is the key solvent to synthesized CDs for the red shift of fluorescence emission, which could be enhanced by adding an AA solvent. The structures of functional groups such as the contents of graphitic N in carbon cores and oxygen-containing functional groups on the surface of CDs are affected by these four solvents. According to the oxidation and selective reduction of NaBH4, the implication for multicolor imaging has been discussed based on the COOH, C-O-C, and C=O functional groups.

Green Approaches to Carbon Nanostructure-Based Biomaterials

The family of carbon nanostructures comprises several members, such as fullerenes, nano-onions, nanodots, nanodiamonds, nanohorns, nanotubes, and graphene-based materials. Their unique electronic properties have attracted great interest for their highly innovative potential in nanomedicine. However, their hydrophobic nature often requires organic solvents for their dispersibility and processing. In this review, we describe the green approaches that have been developed to produce and functionalize carbon nanomaterials for biomedical applications, with a special focus on the very latest reports.