Thermoresponsive Hydrogel-Loading Aluminum Chloride Phthalocyanine as a Drug Release Platform for Topical Administration in Photodynamic Therapy

Advances and perspectives in use of semisolid formulations for photodynamic methods

Although nearly 30 years have passed since the introduction of the first clinically approved photosensitizer for photodynamic therapy, progress in developing new pharmaceutical formulations remains unsatisfactory. This review highlights that despite years of research, many recurring challenges and issues remain unresolved. The paper includes an analysis of selected essential studies involving aminolevulinic acid and its derivatives, as well as other photosensitizers with potential for development as medical products. Among various possible vehicles, special attention is given to gelatin, alginates, poly(ethylene oxide), polyacrylic acid, and chitosan. The focus is particularly on infectious and cancerous diseases. Key aspects of developing new semi-solid drug forms should prioritize the creation of easily manufacturable and biocompatible preparations for clinical use. At the same time, new formulations should preserve the primary function of photosensitizers, which is the generation of reactive oxygen species capable of destroying pathogenic cells or tumors. Additionally, the use of adjuvant properties of carriers, which can enhance the effectiveness of macrocycles, is emphasized, especially in chitosan-based antibacterial formulations. Current research indicates that many promising dyes and macrocyclic compounds with high potential as photosensitizers in photodynamic therapy remain unexplored in formulation and development work. This review outlines potential new and previously explored pathways for advancing photosensitizers as active pharmaceutical ingredients (APIs).

Comprehensive Biosafety Profile of Carbomer-Based Hydrogel Formulations Incorporating Phosphorus Derivatives

Determining the safety of a newly developed experimental product is a crucial condition for its medical use, especially for clinical trials. In this regard, four hydrogel-type formulations were manufactured, all of which were based on carbomer (Blank-CP940) and encapsulated with caffeine (CAF-CP940), phosphorus derivatives (phenyl phosphinic (CAF-S1-CP940) and 2-carboxyethyl phenyl phosphinic acids (CAF-S2-CP940)). The main aim of this research was to provide a comprehensive outline of the biosafety profile of the above-mentioned hydrogels. The complex in vitro screening (cell viability, cytotoxicity, morphological changes in response to exposure, and changes in nuclei morphology) on two types of healthy skin cell lines (HaCaT-human keratinocytes and JB6 Cl 41-5a-murine epidermal cells) exhibited a good biosafety profile when both cell lines were treated for 24 h with 150 μg/mL of each hydrogel. A comprehensive analysis of the hydrogel's impact on the genetic profile of HaCaT cells sustains the in vitro experiments. The biosafety profile was completed with the in vivo and in ovo assays. The outcome revealed that the developed hydrogels exerted good biocompatibility after topical application on BALB/c nude mice's skin. It also revealed a lack of toxicity after exposure to the hen's chicken embryo. Further investigations are needed, regarding the in vitro and in vivo therapeutic efficacy and safety for long-term use and potential clinical translatability.

Dipeptide-1 modified nanostructured lipid carrier-based hydrogel with enhanced skin retention and topical efficacy of curcumin

Topical administration of curcumin (CUR), a natural polyphenol with potent anti-inflammation and analgesic activities, provides a potential approach for local skin diseases. However, the drug delivery efficiency is highly limited by skin barriers and poor bioavailability of CUR. Herein, we propose hydrogel containing CUR-encapsulated dipeptide-1-modified nanostructured lipid carriers (CUR-DP-NLCs gel) to enhance topical drug delivery, and improve the topical therapeutic effect. The prepared CUR-DP-NLCs were characterized and were suitably dispersed into the Pluronic F127 hydrogel for topical application. The optimized CUR-DP-NLCs had a particle size of 152.6 ± 3.47 nm, a zeta potential of -33.1 ± 1.46 mV, an entrapment efficiency of 99.83 ± 0.14%, and a spherical morphology. X-ray diffraction (XRD) studies confirmed that CUR was successfully entrapped by the NLCs in an amorphous form. CUR-DP-NLCs gel exhibited sustained release over 48 h and significantly increased the skin retention of CUR. In vitro skin retention of CUR with CUR-DP-NLCs gel was 2.14 and 2.85 times higher than that of unmodified NLCs gel and free CUR, respectively. Fluorescence microscopy imaging revealed the formed nanoparticles accumulated in the hair follicles with prolonged retention time to form a drug reservoir. The hematoxylin-eosin staining showed that CUR-DP-NLCs gel could change the microstructure of skin layers and disturb the skin barriers. After topical administration to mice, CUR-DP-NLCs gel showed better analgesic and anti-inflammatory activities with no potentially hazardous skin irritation. These results concluded that CUR-DP-NLCs gel is a promising strategy to increase topical drug delivery of CUR in the treatment of local skin diseases.

Copaiba Oil-Based Emulsion as a Natural Chemotherapeutic Agent for the Treatment of Bovine Mastitis: In Vivo Studies

Copaiba oil-resin (COR) extracted from Copaifera reticulata Ducke has been used as a natural chemotherapeutic agent for a wide range of therapeutic applications. This study presents an emulgel design with a high concentration of COR, designed to prevent and treat mastitis. The COR was stabilized in a gel matrix constituted by carbopol C934P and Pluronic^® F127 (ECO formulation) ratios. The permeation study of ECO was accessed by Fourier transform infrared photoacoustic spectroscopy (FTIR-PAS). The results reveal a high capacity of ECO to permeate deep skin layers. Dairy cows with a history of mastitis were used as in vivo models and exposed to ECO treatment. Monitoring of the teat's inflammatory response showed that ECO effectively prevents mastitis. Furthermore, the ECO formulation was able to form a thin film gel on the application side, preventing fly proliferation and significantly reducing the pathogen load. This study reveals a drug that can used as an alternative application for mastitis in human or veterinary clinics.

Thermo and Photoresponsive Emulgel Loaded with Copaifera reticulata Ducke and Chlorophylls: Rheological, Mechanical, Photodynamic and Drug Delivery Properties in Human Skin

Recently, the number of new cases of cutaneous leishmaniasis has been of concern among health agencies. Research that offers new therapeutic alternatives is advantageous, especially those that develop innovative drugs. Therefore, this paper presents the incorporation of Copaifera reticulata Ducke and chlorophyll extract into Pluronic^®® F127 and Carbopol gels, under optimized polymer quantities. The chlorophyll extract (rich in photosensitizing compounds) was obtained by continuous-flow pressurized liquid extraction (PLE), a clean, environmentally friendly method. The system aims to act as as a leishmanicidal, cicatrizant, and antibiotic agent, with reinforcement of the photodynamic therapy (PDT) action. Rheological and mechanical analyses, permeation studies and bioadhesiveness analyses on human skin, and PDT-mediated activation of Staphylococcus aureus were performed. The emulgels showed gelation between 13° and 15 °C, besides pseudoplastic and viscoelastic properties. Furthermore, the systems showed transdermal potential, by releasing chlorophylls and C. reticulata Ducke into the deep layers of human skin, with good bioadhesive performance. The application of PDT reduced three logarithmic colony-forming units of S. aureus bacteria. The results support the potential of the natural drug for future clinical trials in treating wounds and cutaneous leishmania.

Repellent active ingredients encapsulated in polymeric nanoparticles: potential alternative formulations to control arboviruses

Dengue, yellow fever, Chinkungunya, Zika virus, and West Nile fever have infected millions and killed a considerable number of humans since their emergence. These arboviruses are transmitted by mosquito bites and topical chemical repellents are the most commonly used method to protect against vector arthropod species. This study aimed to develop a new generation of repellent formulations to promote improved arboviruses transmission control. A repellent system based on polycaprolactone (PCL)-polymeric nanoparticles was developed for the dual encapsulation of IR3535 and geraniol and further incorporation into a thermosensitive hydrogel. The physicochemical and morphological parameters of the prepared formulations were evaluated by dynamic light scattering (DLS), nano tracking analysis (NTA), atomic force microscopy (AFM). In vitro release mechanisms and permeation performance were evaluated before and after nanoparticles incorporation into the hydrogels. FTIR analysis was performed to evaluate the effect of formulation epidermal contact. Potential cytotoxicity was evaluated using the MTT reduction test and disc diffusion methods. The nanoparticle formulations were stable over 120 days with encapsulation efficiency (EE) of 60% and 99% for IR3535 and geraniol, respectively. AFM analysis revealed a spherical nanoparticle morphology. After 24 h, 7 ± 0.1% and 83 ± 2% of the GRL and IR3535, respectively, were released while the same formulation incorporated in poloxamer 407 hydrogel released 11 ± 0.9% and 29 ± 3% of the loaded GRL and IR3535, respectively. GRL permeation from PCL nanoparticles and PCL nanoparticles in the hydrogel showed similar profiles, while IR3535 permeation was modulated by formulation compositions. Differences in IR3535 permeated amounts were higher for PCL nanoparticles in the hydrogels (36.9 ± 1.1 mg/cm²) compared to the IR3535-PCL nanoparticles (29.2 ± 1.5 mg/cm²). However, both active permeation concentrations were low at 24 h, indicating that the formulations (PCL nanoparticles and PCL in hydrogel) controlled the bioactive percutaneous absorption. Minor changes in the stratum corneum (SC) caused by interaction with the formulations may not represent a consumer safety risk. The cytotoxicity results presented herein indicate the carrier systems based on poly-epsilon caprolactone (PCL) exhibited a reduced toxic effect when compared to emulsions, opening perspectives for these systems to be used as a tool to prolong protection times with lower active repellent concentrations.

Photo-Phytotherapeutic Gel Composed of Copaifera reticulata, Chlorophylls, and k-Carrageenan: A New Perspective for Topical Healing

Chronic wound healing represents an impactful financial burden on healthcare systems. In this context, the use of natural products as an alternative therapy reduces costs and maintains effectiveness. Phytotherapeutic gels applied in photodynamic therapy (PDT) have been developed to act as topical healing medicines and antibiotics. The bioactive system is composed of Spirulina sp. (source of chlorophylls) and Copaifera reticulata oil microdroplets, both incorporated into a polymeric blend constituted by kappa-carrageenan (k-car) and F127 copolymer, constituting a system in which all components are bioactive agents. The flow behavior and viscoelasticity of the formulations were investigated. The photodynamic activity was accessed from studies of the inactivation of Staphylococcus aureus bacteria, the main pathogen of hospital relevance. Furthermore, in vivo studies were conducted using eighteen rabbits with dermatitis (grade III and IV) in both paws. The gels showed significant antibiotic potential in vitro, eliminating up to 100% of S. aureus colonies in the presence or absence of light. The k-car reduced 41% of the viable cells; however, its benefits were enhanced by adding chlorophyll and copaiba oil. The animals treated with the phytotherapeutic medicine showed a reduction in lesion size, with healing and re-epithelialization verified in the histological analyses. The animals submitted to PDT displayed noticeable improvement, indicating this therapy's viability for ulcerative and infected wounds. This behavior was not observed in the iodine control treatment, which worsened the animals' condition. Therefore, gel formulations were a viable alternative for future pharmaceutical applications, aiming at topical healing.

Silymarin nanocrystals-laden chondroitin sulphate-based thermoreversible hydrogels; A promising approach for bioavailability enhancement

Hydrogels has gained tremendous interest as a controlled release drug delivery. However, currently it is a big challenge to attain high drug-loading as well as stable and sustained release of hydrophobic drugs. The poor aqueous solubility and low bioavailability of many drugs have driven the need for research in new formulations. This manuscript hypothesized that incorporation of nanocrystals of hydrophobic drug, such as silymarin into thermoreversible hydrogel could be a solution to these problems. Herein, we prepared nanocrystals of silymarin by antisolvent precipitation technique and characterized for morphology, particle size, polydispersity index (PDI) and zeta potential. Moreover, physical cross-linking of hydrogel formulations based on chondroitin sulphate (CS), kappa-Carrageenan (κ-Cr) and Pluronic® F127 was confirmed by Fourier transformed infrared spectroscopy (FT-IR). The hydrogel gelation time and temperature of optimized hydrogel was 14 ± 3.2 s and 34 ± 0.6 °C, respectively. The release data revealed controlled release of silymarin up to 48 h and in-vivo pharmacokinetic profiling was done in rabbits and further analyzed by high-performance liquid chromatography (HPLC). It is believed that the nanocrystals loaded thermoreversible injectable hydrogel system fabricated in this study provides high drug loading as well as controlled and stable release of hydrophobic drug for extended period.

A Poly (Caprolactone)-Cellulose Nanocomposite Hydrogel for Transdermal Delivery of Hydrocortisone in Treating Psoriasis Vulgaris

Psoriasis vulgaris (PV) is a common chronic disease, affecting much of the population. Hydrocortisone (HCT) is currently utilized as a PV treatment; however, it is associated with undesirable side effects. The aim of this research was to create a thermo-responsive nano-hydrogel delivery system. HCT-loaded sorbitan monostearate (SMS)-polycaprolactone (PCL) nanoparticles, encapsulated with thermo-responsive hydrogel carboxymethyl cellulose (CMC), were synthesized by applying the interfacial polymer-deposition method following solvent displacement. The nanoparticles’ properties were evaluated employing Differential Scanning Colorimetry, Thermogravimetric Analysis, Fourier Transform Infrared Spectroscopy, Scanning Electron Microscopy, Zeta sizer, Ultraviolet/Visual spectroscopy, and cytotoxicity testing. The nanoparticle sizes were 110.5 nm, with polydispersity index of 0.15 and zeta potential of −58.7 mV. A drug-entrapment efficacy of 76% was attained by the HCT-loaded SMS-PCL nanoparticles and in vitro drug-release profiles showed continuous drug release over a period of 24 hrs. Keratinocyte skin cells were treated with HCT-loaded SMS-PCL nanoparticles encapsulated with CMC; the results indicated that the synthesized drug-delivery system was less toxic to the keratinocyte cells compared to HCT. The combined trials and results from the formulation of HCT-loaded SMS-PCL nanoparticles encapsulated with CMC showed evidence that this hydrogel can be utilized as a potentially invaluable formulation for transdermal drug delivery of HCT, with improved efficacy and patient conformity.

Thermosensitive gel based on cellulose derivative for topical delivery of propolis in acne treatment

Thermosensitive bioadhesive formulations can display increased retention time, skin permeation, and improve the topical therapy of many drugs. Acne is an inflammatory process triggered by several factors like the proliferation of the bacteria Propionibacterium acnes. Aiming a new alternative treatment with a natural source, propolis displays great potential due to its antibiotic, anti-inflammatory and healing properties. This study describes the development of bioadhesive thermoresponsive platform with cellulose derivatives and poloxamer 407 for propolis skin delivery. Propolis ethanolic extract (PES) was added to the formulations with sodium carboxymethylcellulose (CMC) or hydroxypropyl methylcellulose (HPMC) and poloxamer 407 (Polox). The formulations were characterized as rheology, bioadhesion and mechanical analysis. The selected formulations were investigated as in vitro propolis release, cytotoxicity, ex vivo skin permeation by Fourier Transform Infrared Photoacoustic Spectroscopy, and the activity against P. acnes. Formulations showed suitable sol-gel transition temperature, shear-thinning behavior and texture profile. CMC presence decreased cohesiveness and adhesiveness of formulations. Polox/HPMC/PES system displayed less cytotoxicity, modified propolis release governed by anomalous transport, skin permeation and activity against P. acnes. These results indicate important advantages in the topical treatment of acne and suggest a potential formulation for clinical evaluation.

Hyaluronan-modified transfersomes based hydrogel for enhanced transdermal delivery of indomethacin

Hyaluronic acid (HA), as a hygroscopic and biocompatible molecule, has displayed unique permeation enhancement in transdermal delivery systems. Hence, indomethacin (IND) was encapsulated in HA-modified transfersomes (IND-HTs) to enhance transdermal IND delivery to reduce adverse effects in this study. The physiochemical properties of IND-HTs were characterized. Results showed that the prepared IND-HTs were spherical and revealed good entrapment efficiency (87.88 ± 2.03%), with a nanometric particle size (221.8 ± 93.34 nm). Then, IND-HTs were further incorporated into a carbopol 940 hydrogel (IND-HTs/Gel) to prolong retention capacity on the skin. The in vitro release and skin permeation experiments of IND-HTs/Gel were carried out with the Franz diffusion cells. It was found that IND-HTs/Gel exhibited sustained drug release, as well as superior drug permeation and flux across the skin. Confocal laser scanning microscopy showed improved penetration of HTs/Gel with a wider distribution and higher fluorescence intensity. The hematoxylin–eosin stained showed that HA improved the transdermal effect by changing the microstructure of skin layers and decreasing skin barrier function. In addition, IND-HTs/Gel showed significant analgesic activity in hot plate test and no potentially hazardous skin irritation. This study indicated that the developed IND-HTs/Gel could be a promising alternative to conventional oral delivery of IND by topical administration.

Design and Optimization of Stimuli-responsive Emulsion-filled Gel for Topical Delivery of Copaiba Oil-resin

This study presents a phytotherapeutic emulsion-filled gel design composed of Pluronic® F127, Carbopol® C934P, and high level of copaiba oil-resin (PHY-ECO). Mathematical modeling and response surface methodology (RSM) were employed to access the optimal ratio between the oil and the polymer gel-matrix constituents. The chemometric approach showed robust mechanical and thermoresponsive properties for emulsion gel. The model predicts viscosity parameters at 35.0°C (skin temperature) from PHY-ECOs. Optimized PHY-ECOs were described by 18-20% (w/w) F127, 0.25% (w/w) C934P, and 15% (w/w) copaiba oil-resin, and showed interfacial layers properties that led to high physicochemical stability. Besides, it had thermal stimuli-responsive that led large viscosity range before and after skin administration, observed by oscillatory rheology. These behaviors give the optimized smart PHY-ECO high design potential to be used as a pharmaceutical platform for CO delivery, focusing on the anti-inflammatory therapy and skin wound care.

Simple Formation of Cancer Drug-Containing Self-Assembled Hydrogels with Temperature and pH-Responsive Release

The purpose of a drug delivery system is to efficiently deliver drugs to a desired target, while simultaneously reducing the side effects caused by these drugs and maximizing their efficacy. However, in the manufacture of a drug delivery system, it is difficult to control the amount of drug encapsulation. In this study, we developed a simple formation process of self-assembled hydrogels that made it easier to package the desired amount of anticancer drugs. A self-assembled hydrogel was prepared by simply mixing transferrin, dithiothreitol, and an anticancer drug in a salt solvent. The structural conditions of the hydrogel were determined in order to control the concentration of the transferrin protein, dithiothreitol, and salt in the solvent. The self-assembled hydrogels contained the desired amount of anticancer drugs. With this system, changes in pH and temperature control the release rate and the release ratio of anticancer drugs. The cytotoxicity of the drug-loaded hydrogel was evaluated, which showed that 80% of the treated cells had been killed following 48 h of incubation.

Increased photoluminescence and photodynamic therapy efficiency of hydroxyapatite-β-cyclodextrin-methylene blue@carbon powders with the favor of hydrogen bonding effect

To meet the requirements of theranostics with diagnosis and treatment, photodynamic-based therapy is simultaneously enabled with the incorporation of methylene blue (MB) as imaging agent and photosensitizer in core-shell structured drug vehicles. Citrate-modified hydroxyapatite (HAp) powders are first grafted with β-cyclodextrin (CD), then combined with MB molecules through electrostatic interactions, and finally encapsulated with carbon shells through hydro-thermal carbonization of glucose to prepare HAp-CD-MB@C powders. Processing parameters of carbonization temperature, glucose addition, reaction time and CD addition are varied to prepare drug carriers with modulated crystallite degrees and photo-physical properties. Increased crystallite sizes of HAp are accompanied with the formation of C=O, C=C and C-OH groups in carbon shell, endowing sustainable release behaviors of MB through carbonous structures. High photoluminescence intensities are fairly related with red-shifted vibration peaks of groups in tightly combined MB molecules through hydrogen bonds. This hydrogen bonding effect is significantly increased for HAp-CD-MB@C140 with the splitting of CH₃-involved vibration peaks in infrared spectra, which causes increase in photoluminescence intensity and four-fold increase in generation ratio of singlet oxygen. The present studies shed light on preparation of core-shell structured drug carriers, modulation of aggregate states of MB molecules, enhancement of photo-physical properties and improvement of generation ratio of singlet oxygen during photodynamic-based therapy.

Analyzing the Effects of Silica Nanospheres on the Sol-Gel Transition Profile of Thermosensitive Hydrogels

The insertion of nanoparticles into smart hydrogels can diversify their functionalities by a synergistic combination of the components properties within the hydrogels. While these hybrid systems are attractive to the biomaterials field, careful design and control of their properties are required since the new interactions between the polymer and the nanoparticles can result in changes or the loss of hydrogels stimuli response. In order to understand the physicochemical aspects of the thermoresponsive systems, nanocomposites of poly(N-vinylcaprolactam) (PNVCL) and silica nanoparticles with different sizes and concentrations were synthesized. The UV-vis and DLS techniques showed that the PNVCL has a sharp phase transition at 34 °C, while the nanocomposites have a diffuse transition. The nanocomposites showed an initial coil-globule transition before the phase transition takes place. This was identified by the evolution of the hydrodynamic diameter of the nanocomposite globules before the cloud point temperature (T_cp), which remained constant for PNVCL. This new transition profile can be described by two stages in which microscopic volume transitions occur first, followed by the macroscopic transition that forms the hydrogel. These results show that the proposed nanocomposites can be designed to have tunable stimuli response to smaller temperature variations with the formation of intermediate globule states.