Analyzing the Effects of Silica Nanospheres on the Sol-Gel Transition Profile of Thermosensitive Hydrogels

The Method of Direct and Reverse Phase Portraits as a Tool for Systematizing the Results of Studies of Phase Transitions in Solutions of Thermosensitive Polymers

It is shown that a more than significant amount of experimental data obtained in the field of studying systems based on thermosensitive hydrophilic polymers and reflected in the literature over the past decades makes the issue of their systematization and classification relevant. This, in turn, makes relevant the question of choosing the appropriate classification criteria. It is shown that the basic classification feature can be the number of phase transition stages, which can vary from one to four or more depending on the nature of the temperature-sensitive system. In this work, the method of inverse phase portraits is proposed for the first time. It was intended, among other things, to identify the number of phase transition stages. Moreover, the accuracy of this method significantly exceeds the accuracy of the previously used method of direct phase portraits since, for the first time, the operation of numerical differentiation is replaced by the operation of numerical integration. A specific example of the application of the proposed method for the analysis of a previously studied temperature-sensitive system is presented. It is shown that this method also allows for a quantitative comparison between the results obtained by the differential calorimetry method and the turbidimetry method. Issues related to increasing the resolution of the method of direct phase portraits are discussed.

Review of the Perspectives and Study of Thermo-Responsive Polymer Gels and Applications in Oil-Based Drilling Fluids

Thermoresponsive polymer gels are a type of intelligent material that can react to changes in temperature. These materials possess excellent innovative properties and find use in various fields. This paper systematically analyzes the methods for testing and regulating phase transition temperatures of thermo-responsive polymer gels based on their response mechanism. The report thoroughly introduces the latest research on thermo-responsive polymer gels in oil and gas extraction, discussing their advantages and challenges across various environments. Additionally, it elucidates how the application limitations of high-temperature and high-salt conditions can be resolved through process optimization and material innovation, ultimately broadening the scope of application of thermo-responsive polymer gels in oil and gas extraction. The article discusses the technological development and potential applications of thermo-responsive polymer gels in oil-based drilling fluids. This analysis aims to offer researchers in the oil and gas industry detailed insights into future possibilities for thermo-responsive polymer gels and to provide helpful guidance for their practical use in oil-based drilling fluids.

Chitosan-based sponges containing clotrimazole for the topical management of vulvovaginal candidiasis

Vulvovaginal candidiasis (VVC) persists as a worrying women's healthcare issue, often relying on suboptimal therapeutics. Novel intravaginal dosage forms focusing on improving patient acceptability and featuring improved biopharmaceutical properties could be interesting alternatives to available antifungal products. Different formulations of sponges based on chitosan (Ch), with or without crosslinking and co-formulated with poly(N-vinylcaprolactam) (PNVCL), were produced for the topical administration of clotrimazole (CTZ) and further tested for physicochemical properties, drug release, cytotoxicity and antifungal activity. Results showed that high amounts of CTZ (roughly 30-50 %) could be incorporated into sponges obtained by using a simple freeze-drying methodology. Cross-linking of Ch with ammonia affected the morphology and mechanical features of sponges and shifted the release profile from sustained (around 20 % and 60 % drug released after 4 h and 24 h, respectively) to fast-releasing (over 90 % at 4 h). The combination of PNVCL with non-crosslinked Ch also allowed tuning drug release, namely by increasing the initial amount of CTZ released in simulated vaginal fluid (roughly 40 % after 4 h), as compared to sponges featuring only non-crosslinked Ch. All formulations displayed low toxicity to cell lines derived from the female genital tract, with viability values kept above 70 % after 24 h incubation with sponge extracts. These also allowed maintaining the rapid onset of the antifungal effects of CTZ at minimum inhibitory concentrations ranging from 0.5 to 16 μg/mL for a panel of six different Candida spp. strains. Overall, proposed sponge formulations appear to be promising alternatives for the safe and effective management of VVC.

Cytotoxicity and Biomineralization Potential of Flavonoids Incorporated into PNVCL Hydrogels

This study aimed to evaluate the effects of flavonoids incorporated into poly(N-vinylcaprolactam) (PNVCL) hydrogel on cell viability and mineralization markers of odontoblast-like cells. MDPC-23 cells were exposed to ampelopsin (AMP), isoquercitrin (ISO), rutin (RUT) and control calcium hydroxide (CH) for evaluation of cell viability, total protein (TP) production, alkaline phosphatase (ALP) activity and mineralized nodule deposition by colorimetric assays. Based on an initial screening, AMP and CH were loaded into PNVCL hydrogels and had their cytotoxicity and effect on mineralization markers determined. Cell viability was above 70% when MDPC-23 cells were treated with AMP, ISO and RUT. AMP showed the highest ALP activity and mineralized nodule deposition. Extracts of PNVCL+AMP and PNVCL+CH in culture medium (at the dilutions of 1/16 and 1/32) did not affect cell viability and stimulated ALP activity and mineralized nodules’ deposition, which were statistically higher than the control in osteogenic medium. In conclusion, AMP and AMP-loaded PNVCL hydrogels were cytocompatible and able to induce bio-mineralization markers in odontoblast-cells.

Injectable Thermosensitive Nanocomposites Based on Poly(N-vinylcaprolactam) and Silica Particles for Localized Release of Hydrophilic and Hydrophobic Drugs

The systemic delivery of drugs employed by conventional methods has shown to be less effective than a localized delivery system. Many drugs have the effectiveness reduced by fast clearance, increasing the amount required for an efficient treatment. One way to overcome this drawback is through the use of thermoresponsive polymers that undergo a sol-gel transition at physiological temperature, allowing their injection directly in the desired site. In this work, thermosensitive nanocomposites based on poly(N-vinylcaprolactam) and silica particles with 80 and 330 nm were synthesized to be employed as delivery systems for hydrophobic (naringin) and hydrophilic (doxorubicin hydrochloride) drugs. The insertion of SiO₂ increased the rheological properties of the nanocomposite at 37 °C, which helps to prevent its diffusion away from the site of injection. The synthesized materials were also able to control the drug release for a period of 7 days under physiological conditions. Due to its higher hydrophobicity and better interaction with the PNVCL matrix, naringin presented a more controlled release. The Korsmeyer-Peppas model indicated different release mechanisms for each drug. At last, a preliminary in vitro study of DOX-loaded nanocomposites cultured with L929 and MB49 cells showed negligible toxic effects on healthy cells and better efficient inhibition of carcinoma cells.

3D Interlayer Slidable Multilayer Nano-Graphene Oxide Acrylate Crosslinked Tough Hydrogel

The design of three-dimensional crosslinked units with a spatial structure is of great significance for improving the mechanical properties of hydrogels. However, almost all the nanocomposites incorporated in hydrogels were defined as rigid nanofillers without further discussion on the potential contribution from the spatial structure change. In this work, the 3D nano chemical crosslinker multilayer graphene oxide acrylate (mGOa) was developed as a pressure-responsive crosslinker to achieve both low elastic modulus and high compression stress by synergizing more polymer chains against the loading force through interlayer sliding. Results showed that the hydrogel crosslinked by only 2 mg/mL mGOa nano chemical crosslinker in the poly(2-hydroxyethyl methacrylate-co-acrylamide) hydrogel (molar ratio: 1:1) can effectively enhance the mechanical strength up to 14.1 ± 2.1 MPa at a high compressive strain (90.6%) with an elastic modulus of less than 0.03 MPa at the initial 5% compression, whereas the hydrogel crosslinked by methacrylated single-layer graphene oxide (sGOa) or a small-molecule chemical crosslinker, N,N'-methylene bisacrylamide, can only reach 2.3 ± 0.8 MPa and 1.4 ± 0.4 MPa, respectively. In addition, the instantaneous modulus of the mGOa crosslinked hydrogel rapidly increased to the peak value with the increase of strain. The repeated compression test of HcA-mGOa hydrogels showed the responsive increase of the modulus, which was promoted by the synergism of polymer chains under compression. This indicated that the interlayer sliding of mGOa is the key contributor to mechanical strength enhancement, which provides a new rationale to design tough hydrogels.

Stimulus-responsive nanomaterials under physical regulation for biomedical applications

Cancer is a growing threat to human beings. Traditional treatments for malignant tumors usually involve invasive means to healthy human tissues, such as surgical treatment and chemotherapy. In recent years the use of specific stimulus-responsive materials in combination with some non-contact, non-invasive stimuli can lead to better efficacy and has become an important area of research. It promises to develop personalized treatment systems for four types of physical stimuli: light, ultrasound, magnetic field, and temperature. Nanomaterials that are responsive to these stimuli can be used to enhance drug delivery, cancer treatment, and tissue engineering. This paper reviews the principles of the stimuli mentioned above, their effects on materials, and how they work with nanomaterials. For this aim, we focus on specific applications in controlled drug release, cancer therapy, tissue engineering, and virus detection, with particular reference to recent photothermal, photodynamic, sonodynamic, magnetothermal, radiation, and other types of therapies. It is instructive for the future development of stimulus-responsive nanomaterials for these aspects.