Tailoring Defect Density in UiO-66 Frameworks for Enhanced Pb(II) Adsorption

Recyclable Fe3O4@UiO-66-PDA core-shell nanomaterials for extensive metal ion adsorption: Batch experiments and theoretical analysis

With the ever-increasing challenge of heavy metal pollution, the imperative for developing highly efficient adsorbents has become apparent to remove metal ions from wastewater completely. In this study, we introduce a novel magnetic core-shell adsorbent, Fe3O4@UiO-66-PDA. It features a polydopamine (PDA) modified zirconium-based metal-organic framework (UiO-66) synthesized through a simple solvothermal method. The adsorbent boasts a unique core-shell architecture with a high specific surface area, abundant micropores, and remarkable thermal stability. The adsorption capabilities of six metal ions (Fe3+, Mn2+, Pb2+, Cu2+, Hg2+, and Cd2+) were systematically investigated, guided by the theory of hard and soft acids and bases. Among these, three representative metal ions (Fe3+, Pb2+, and Hg2+) were scrutinized in detail. The activated Fe3O4@UiO-66-PDA exhibited exceptional adsorption capacities for these metal ions, achieving impressive values of 97.99 mg/g, 121.42 mg/g, and 130.72 mg/g, respectively, at pH 5.0. Moreover, the adsorbent demonstrated efficient recovery from aqueous solution using an external magnet, maintaining robust adsorption efficiency (>80%) and stability even after six cycles. To delve deeper into the optimized adsorption of Hg2+, density functional theory (DFT) analysis was employed, revealing an adsorption energy of -2.61 eV for Hg2+. This notable adsorption capacity was primarily attributed to electron interactions and coordination effects. This study offers valuable insights into metal ion adsorption facilitated, by magnetic metal-organic framework (MOF) materials.

Defect-enabling zirconium-based metal-organic frameworks for energy and environmental remediation applications

This comprehensive review explores the diverse applications of defective zirconium-based metal-organic frameworks (Zr-MOFs) in energy and environmental remediation. Zr-MOFs have gained significant attention due to their unique properties, and deliberate introduction of defects further enhances their functionality. The review encompasses several areas where defective Zr-MOFs exhibit promise, including environmental remediation, detoxification of chemical warfare agents, photocatalytic energy conversions, and electrochemical applications. Defects play a pivotal role by creating open sites within the framework, facilitating effective adsorption and remediation of pollutants. They also contribute to the catalytic activity of Zr-MOFs, enabling efficient energy conversion processes such as hydrogen production and CO2 reduction. The review underscores the importance of defect manipulation, including control over their distribution and type, to optimize the performance of Zr-MOFs. Through tailored defect engineering and precise selection of functional groups, researchers can enhance the selectivity and efficiency of Zr-MOFs for specific applications. Additionally, pore size manipulation influences the adsorption capacity and transport properties of Zr-MOFs, further expanding their potential in environmental remediation and energy conversion. Defective Zr-MOFs exhibit remarkable stability and synthetic versatility, making them suitable for diverse environmental conditions and allowing for the introduction of missing linkers, cluster defects, or post-synthetic modifications to precisely tailor their properties. Overall, this review highlights the promising prospects of defective Zr-MOFs in addressing energy and environmental challenges, positioning them as versatile tools for sustainable solutions and paving the way for advancements in various sectors toward a cleaner and more sustainable future.

Defective UiO-66-NH2 (Zr) for Simultaneous Adsorption of Phosphate and Pb2+ for Hydrogen Peroxide Purification

Removal of hetero ions from the hydrogen peroxide solution is a crucial step in purifying electronic-grade H2O2. Conventional adsorption materials are challenged to meet the need for the simultaneous adsorption of both anions and cations in solvents. UiO-66 (Zr) modified by acetic acid and amino group for simultaneous adsorption of phosphate and Pb2+ in H2O2 purification was fabricated in this work. The as-prepared defective UiO-66-NH2 (Zr) demonstrated a significant increase in specific surface area and porosity, along with more exposed sites for phosphate and Pb2+ adsorption. The adsorption capacity of De-UiO-66-NH2 for phosphate and Pb2+ in H2O2 solution was 52.28 mg g-1 and 35.4 mg g-1, which is 1.19 times and 1.88 times that of unmodified UiO-66 (Zr), respectively. The trace simultaneous adsorption with both 100 ppb phosphate and Pb2+ showed removal rates of 94.0% and 88.7%, respectively, confirming the practicality of MOF materials in the purification of electronic chemicals. This work highlights the potential of Zr-based MOFs as anionic and cationic simultaneous adsorbents for highly efficient purification of electronic-grade solvents.

Turning precious metal-loaded e-waste to useful catalysts: Investigation into supercilious recovery and catalyst viability for peroxymonosulfate activation

Here, the key tasks to be accomplished are selective precious metal recovery from e-wastewater and their conversion into valuable catalysts for peroxymonosulfate (PMS) activation. In this regard, we developed a hybrid material using 3D functional graphene foam and copper para-phenylenedithol (Cu-pPDT) MOF. The prepared hybrid showed a supercilious recovery of 92-95% even up to five cycles for Au(III) and Pd(II), which can be viewed as a reference for both the 2D graphene and the MOFs family. The outstanding performance has been attributed principally to the impact of diverse functionality as well as the unique morphology of 3D graphene foam, which provided a wide range of surface area and additional active sites in the hybrid frameworks. To prepare the surface-loaded metal nanoparticle catalysts, the sorbed samples recovered after precious metal extraction were calcined at 800 °C. The viability of the developed catalysts for the breakdown of 4-nitrophenol (4-NP) via PMS activation was investigated. Electron paramagnetic resonance spectroscopy (EPR) and experiments with radical scavengers suggest that sulfate and hydroxyl radicals are the main reactive species involved in the breakdown of 4-NP. This is because the active graphitic carbon matrix and the exposed precious metal and copper active sites work together in a way that is more effective.

Modeling and spectroscopic investigation of U(VI) removal on porous amidoxime-functionalized metal organic framework derived from macromolecular carbohydrate

The investigation of interaction mechanism of U(VI) selective removal on amidoxime-functionalized metal organic framework (i.e., UiO-66(Zr)-AO) derived from macromolecular carbohydrate is conducive to apply metal organic frameworks in actual environmental remediation. The batch experiments showed that UiO-66(Zr)-AO displayed the fast removal rate (equilibrium time of 0.5 h), high adsorption capacity (384.6 mg/g), excellent regeneration performance (<10 % decrease after three cycles) towards U(VI) removal due to the unprecedented chemical stability, large surface area and simple fabrication. U(VI) removal at different pH can be satisfactorily fitted by diffuse layer modeling with cation exchange at low pH and an inner-sphere surface complexation at high pH. The inner-sphere surface complexation was further demonstrated by X-ray absorption near edge structure (XANES) and extended X-ray absorption fine structure (EXAFS) analysis. These findings revealed that UiO-66(Zr)-AO can be an effective adsorbent to remove the radionuclides from aqueous solution, which is crucial for recycling of uranium resource and decreasing the uranium harm to the environment.

Improvement of magnetite adsorption performance for Pb (II) by introducing defects

Surface defect engineering is an efficient strategy to enhance the adsorption properties of materials. After calcination in argon, the adsorption capacity of natural magnetite to Pb (II) is significantly improved. The Rietveld refinement, Mössbauer spectrum, and XPS were used to prove the existence of oxygen and cation vacancies in the crystal structure of magnetite after calcination, and it is found that the vacancy content is linearly related to the adsorption amount of Pb (II). This indicates that the increase in the adsorption performance of magnetite after calcination is determined by the vacancy. The adsorption capacity increases from 8 to 26 mg/g when the calcination temperature reaches 700°C. The equilibrium adsorption process of Pb (II) on magnetite can be well fitted to the Langmuir model, and the kinetic adsorption followed a pseudo-second-order mechanism. The improvement of the adsorption performance of magnetite is mainly due to the change in its structure, which depends on the oxidation degree and surface effect of magnetite in the calcination process. This work also provides a theoretical basis for the broad application of magnetite as environmental material.

A post-functional Ti-based MOFs composite for selective removal of Pb (II) from water

Lead ions in water have notorious effects on humans and environment. It is important to design an adsorbent with high adsorption capacity and reproducibility for efficiently removing Pb (II)ions from polluted water. Here, a novel Ti-based MOFs material (BDB-MIL-125(Ti)@Fe₃O₄) was prepared by modifying NH₂-MIL-125(Ti) with sulfhydryl and amino groups. Due to the large number of active sites, the maximum Pb (II) adsorption capacity of BDB-MIL-125(Ti)@Fe₃O₄ was 710.79 mg/g at 25 °C and pH = 6 within 120 min corresponding to a maximum removal rate of 95.68%. The adsorbent also has extremely high selectivity and good cycling adsorption performance. The adsorption isotherms and kinetics agree with the Langmuir and the pseudo-second-order models, indicating that the process was chemisorption. Thermodynamic studies prove that spontaneous processes enhance Pb (II) adsorption at higher temperatures. DFT and FMOs calculations were used to discuss the adsorption mechanism. The sulfhydryl groups on the surface of organic ligands have a stronger affinity for Pb (II).

Highly Efficient and Simultaneous Removal of Cr(VI) and Imidacloprid through a Ferrocene-Modified MIL-100(Fe) Composite from an Aqueous Solution

A novel nanocomposite [Fc-MIL-100(Fe)] was constructed by combining ferrocene (Fc) with the porous structural metal-organic framework [MIL-100(Fe)]. The proposed composite material could simultaneously and efficiently remove hexavalent chromium [Cr(VI)] and imidacloprid and reduced strongly noxious Cr(VI) to weakly noxious trivalent chromium [Cr(III)]. The removal efficiencies of the composite material for Cr(VI) and imidacloprid could reach 95% after 15 h. The adsorption process was determined by kinetics, isotherms, and thermodynamics. The results demonstrated that the adsorption kinetics of Cr(VI) followed the pseudo-second-order model mainly by chemisorption; meanwhile, the adsorption of imidacloprid by the material conformed to the pseudo-first-order kinetics, which indicated that physical adsorption was the main process. Additionally, the intraparticle diffusion model revealed that the uptake of imidacloprid and Cr(VI) occurred via intraparticle diffusion at the composite material. The adsorption procedure for Cr(VI) was fitted to the Langmuir model (R² = 0.995) via monolayer adsorption, and that for imidacloprid was fitted to the Freundlich model (R² = 0.995) due to multilayer or heterogeneous adsorption. The thermodynamic research confirmed that the adsorption procedure was exothermic and spontaneous. Infrared spectroscopy, X-ray photoelectron spectra, and the pH effect implied that intermolecular hydrogen bonding and electrostatic interaction played a crucial role during the removal process. Fc-MIL-100(Fe) also exhibited long-term stability and satisfactory regeneration and reusability. Therefore, this method may enhance an environmentally friendly and prospective approach for concurrently removing imidacloprid and Cr(VI) from wastewater.

High Performance of UiO-66 Metal–Organic Framework Modified with Melamine for Uptaking of Lead and Cadmium from Aqueous Solutions

In this paper, UiO-66 metal–organic framework (MOF) was prepared by a hydrothermal method and modified consequently with melamine (MUiO-66), as so as enhance the adsorption properties of these materials in liquid-phase adsorption. With respect to this, the adsorption of lead and cadmium divalent ions was performed under varying conditions of pH, metal ion concentration, contact time, adsorbent dose and temperature. Morphology, texture properties, functional groups, crystallinity and thermal properties of both MOFs were examined. UiO-66 composed of sphere-like particles and covered by layers of melamine with enhancing in crystallinity and active sites as well as the total surface area increased from 1080 to 1160 m2/g. The modified UiO-66 with melamine (MUiO-66) showed a notable adsorption capacity of 177.5 and 146.6 mg/g for Pb and Cd(II) ions, respectively. Adsorption of both metals fitted well with the pseudo-second-order kinetic and Langmuir models and controlled by a physisorption mechanism at pH of 5. Also, adsorption process is an endothermic in nature and desorption is achieved well for three cycles by MUiO-66. Therefore, UiO-66 and MUiO-66 obtained in this work have a great promise in adsorption of heavy metals such as Pb and Cd(II) ions from wastewater.

Strategies for induced defects in metal-organic frameworks for enhancing adsorption and catalytic performance

Metal-organic frameworks (MOFs) have emerged among porous materials. The designable structure and specific functionality make them stand out for diverse applications. In conceptual MOF, the metal ions/clusters and organic ligands...