Insights into High-Performance and Selective Elimination of Cationic Dye from Multicomponent Systems by Using Fe-Based Metal-Organic Frameworks

Synergistically enhancing the selective adsorption of cationic dyes through copper impregnation and amino functionality into iron-based metal-organic frameworks

Dyes contaminating the sewages have seriously threatened the living beings and their separation from wastewater in terms of potential resource recovery is of high value. Herein, both of metal node doping and ligand group grafting were taken into account to enhance the adsorption selectivity of Fe-MOFs towards cationic dyes. The positive correlation between copper doping amount and selective coefficient (∂MOMB) for methylene blue (MB) over methyl orange (MO) within a certain range was mainly attributed to the increased surface negative charges via partial replacement of Fe(III) with Cu(II). Moreover, the amount of surface negative charges was further increased after amino functionalization and there was a synergism between Cu(II) and -NH2 in selectivity enhancement. As a result, Fe0.6Cu0.4-BDC-NH2 exhibited a 22.5-times increase in ∂MOMB and other cationic dyes including malachite green (MG) and rhodamine B (Rh. B) could also be selectively separated from binary and quaternary mixed dye systems. Moreover, Fe0.6Cu0.4-BDC-NH2 showed many superiorities like a wide pH range of 4.0-8.0, strong anti-interference ability over various inorganic ions, good recyclability, and stability. The adsorption kinetics and isotherm suggested that the MB adsorption process was a homogeneous single-layer chemisorption. Additionally, the thermodynamics manifested that the overall process was exothermic and spontaneous. According to the FT-IR and XPS spectra analysis, the electrostatic interaction and hydrogen bonding were determined as the main driving forces, and π-π interaction also contributed to the adsorption process.

One-Step Prepared Multifunctional Polyacrylonitrile/MIL-100(Fe) Membrane with High-Density Porous Fibers for Efficient Dye/Oil Wastewater Remediation

With environmental pollution becoming more serious, developing efficient treatment technologies for all kinds of organic wastewater has become the focus of current research. In this work, the coaxial electrospinning technology was used to one-step fabricate a porous and underwater superoleophobic polyacrylonitrile nanofibrous membrane with an Fe-based metal-organic framework (MIL-100(Fe)). Benefiting from the synergistic effect of two jets, the nanofibers are smaller and denser, which prompt the exposure of more nanomaterial additives (MIL-100(Fe)). The BET surface area increased to 202.888 m2/g, and the membranes demonstrated outstanding underwater superoleophobicity. Moreover, compared with traditional blended matrix membranes by the single-axis method, separation of the modifier and membrane matrix material by coaxial methods also maintained excellent mechanical properties, which enhanced Young's modulus 3.4 times (∼1.34 MPa). As a result, facing soluble dyes, the porous C-PAN/MIL-100(Fe) membrane can demonstrate outstanding and fast adsorptive property (the Qm of MB and CR reached 44.71 and 88.74 mg g-1, respectively). For oily emulsion, the hydrophilic and oleophobic nanofibrous reticular surface provided excellent separation performance (flux: 1124.0-1549.3 L m-2 h-1, R > 98%). Moreover, the porous and underwater superoleophobic C-PAN/MIL-100(Fe)-0.5 membrane can synchronously purify the dye/oil mixture emulsions by one-step filtration. Based on the above performance, we believe that the modified nanofibrous membrane prepared by one-step coaxial electrospinning technology can promote more studies of the development of membrane preparation technology in the field of oily wastewater treatment.

Highlights in Interface of Wastewater Treatment by Utilizing Metal Organic Frameworks: Purification and Adsorption Kinetics

Polluted water has become a concern for the scientific community as it causes many severe threats to living beings. Detection or removal of contaminants present in wastewater and attaining purity of water that can be used for various purposes are a primary responsibility. Different treatment methods have already been used for the purification of sewage. There is a need for low-cost, highly selective, and reusable materials that can efficiently remove pollutants or purify contaminated water. In this regard, MOFs have shown significant potential for applications such as supercapacitors, drug delivery, gas storage, pollutant adsorption, etc. The outstanding structural diversity, substantial surface areas, and adjustable pore sizes of MOFs make them superior candidates for wastewater treatment. This Review provides an overview of the interaction science and engineering (kinetic and thermodynamic aspects with interactions) underpinning MOFs for water purification. First, fundamental strategies for the synthesis methods of MOFs, different categories, and their applicability in wastewater treatment are summarized, followed by a detailed explanation of various interaction mechanisms. Finally, current challenges and future outlooks for research on MOF materials toward the adsorption of hazardous components are discussed. A new avenue for modifying their structural characteristics for the adsorption and separation of hazardous materials, which will undoubtedly direct future work, is also summarized.

Green Synthesis of Cerium-Based Metal-Organic Framework (Ce-UiO-66 MOF) for Wastewater Treatment

Green synthesis of metal-organic frameworks (MOFs) in aqueous solutions under ambient conditions with reduced production costs and environmental effects is an efficient technique to transfer lab-scale production to industrial large scale. Hence, this work proposes a green, low-cost, sustainable, rapid, and innovative synthetic strategy to produce cerium-based (Ce-UiO-66) MOFs under ambient conditions in the presence of water as a green solvent. This synthetic strategy exhibits great potential compared to conventional solvothermal synthetic techniques, and it does not need external activation energy and organic solvents, which can achieve the standards of green chemistry. Ce-UiO-66 MOF was synthesized successfully and utilized as a green adsorbent to efficiently eliminate anionic Congo Red (CR) dye from dye-containing wastewater. The experimental adsorption results were well matched to the pseudo-second-order kinetic and Langmuir isotherm models, in which the maximum CR adsorption capacity was measured to be about 285.71 mg/g. To evidence the applicability of Ce-UiO-66 MOFs in CR adsorption, the CR adsorption reaction was performed in the presence of interfering pollutants [e.g., salts (NaCl, KCl, and MgCl2) and cationic organic dyes (Malachite Green (MG) and Methylene Blue (MB)], where the results prove the promising adsorption performances of Ce-UiO-66 MOFs toward CR dye. Interestingly, the synthesized adsorbent exhibited high structural stability during repeated adsorption-desorption cycles, where the surface area of MOFs decreased from 555 to 376 m2/g after three cycles, while its CR adsorption capacity decreased by only 10% compared to that of the fresh adsorbent. All these outstanding properties indicate that the Ce-UiO-66 MOFs will be an effective adsorbent for water and wastewater treatment applications.

First-Principles Perspective on Gas Adsorption by [Fe4S4]-Based Metal-Organic Frameworks

[Fe₄S₄] or [4S-4Fe] clusters are responsible for storing and transferring electrons in key cellular processes and interact with their microenvironment to modulate their oxidation and magnetic states. Therefore, these clusters are ideal for the metal node of chemically and electromagnetically tunable metal-organic frameworks (MOFs). To examine the adsorption-based applications of [Fe₄S₄]-based MOFs, we used density functional theory calculations and studied the adsorption of CO₂, CH₄, H₂O, H₂, N₂, NO₂, O₂, and SO₂ onto [Fe₄S₄]⁰, [Fe₄S₄]²⁺, and two 1D MOF models with the carboxylate and 1,4-benzenedithiolate organic linkers. Our reaction kinetics and thermodynamics results indicated that MOF formation promotes the oxidative and hydrolytic stability of the [Fe₄S₄] clusters but decreases their adsorption efficiency. Our study suggests the potential industrial applications of these [Fe₄S₄]-based MOFs because of their limited capacity to adsorb CO₂, CH₄, H₂O, H₂, N₂, O₂, and SO₂ and high selectivity for NO₂ adsorption.

Research Progress on Adsorption and Separation of Petroleum Hydrocarbon Molecules by Porous Materials

Petroleum is an indispensable chemical product in industrial production and daily life. The hydrocarbon molecules in petroleum are important raw materials in the organic chemical industry. The hydrocarbons currently used in industry are usually obtained by fractional distillation of petroleum, which not only consumes more energy, but has poor separation selectivity for some hydrocarbons. Adsorption separation technology has many advantages such as energy saving and high efficiency. It can adsorb and separate hydrocarbon molecules in petroleum with low energy consumption and high selectivity under mild conditions. In this paper, the research progress of adsorption and separation of hydrocarbon molecules in petroleum is reviewed, and various new catalysts and the rules of adsorption and desorption are analyzed.