Noncovalently Cross-Linked Polymeric Materials Reinforced by Well-Designed In Situ-Formed Nanofillers

Influence of Nano-CeO2 and Graphene Nanoplatelets on the Conductivity and Dielectric Properties of Poly(vinylidene fluoride) Nanocomposite Films

Novel three-phase polymer nanocomposites (PNCs) based on cerium oxide (CeO2) nanoparticles (NPs) and graphene nanoplatelets (GNPs) incorporated in a poly(vinylidene fluoride) (PVDF) matrix were formulated using a solution-casting approach. To understand the structural and morphological features of PVDF/CeO2/GNP nanocomposites (NCs), scanning electron microscopy (SEM) and high-resolution transmission electron microscopy (HRTEM) analyses were accomplished. The PVDF/CeO2/GNP NCs displayed improved thermal stability which resulted from strong bonding between GNPs and CeO2 NPs and restriction of the polymer chain movement. The introduction of CeO2 NPs and GNPs within the PVDF matrix and good synergy between CeO2 NPs and GNPs led to variable mechanical properties of the prepared NCs. The PVDF/CeO2/GNP NCs portrayed reduced thermal stability, which could be due to the increased mobility of PVDF chains imposed by GNPs leading to the formation of volatile degradation products. Moreover, PVDF/CeO2/GNP NCs exhibited good electrical conductivity and high dielectric permittivity. The obtained dielectric permittivity value for the PVDF/CeO2/GNP NCs was 3-fold greater than PVDF/CeO2 NCs, making these novel tertiary composite materials a probable candidate for energy-storage applications.

Engineering of Chain Rigidity and Hydrogen Bond Cross-Linking toward Ultra-Strong, Healable, Recyclable, and Water-Resistant Elastomers

High-performance elastomers have gained significant interest because of their wide applications in industry and our daily life. However, it remains a great challenge to fabricate elastomers simultaneously integrating ultra-high mechanical strength, toughness, and excellent healing and recycling capacities. In this study, ultra-strong, healable, and recyclable elastomers are fabricated by dynamically cross-linking copolymers composed of rigid polyimide (PI) segments and soft poly(urea-urethane) (PUU) segments with hydrogen bonds. The elastomers, which are denoted as PIPUU, have a record-high tensile strength of ≈142 MPa and an extremely high toughness of ≈527 MJ m^-3 . The structure of the PIPUU elastomer contains hydrogen-bond-cross-linked elastic matrix and homogenously dispersed rigid nanostructures. The rigid PI segments self-assemble to generate phase-separated nanostructures that serve as nanofillers to significantly strengthen the elastomers. Meanwhile, the elastic matrix is composed of soft PUU segments cross-linked with reversible hydrogen bonds, which largely enhance the strength and toughness of the elastomer. The dynamically cross-linked PIPUU elastomers can be healed and recycled to restore their original mechanical strength. Moreover, because of the excellent mechanical performance and the hydrophobic PI segments, the PIPUU elastomers are scratch-, puncture-, and water-resistant.

Preparation of Mechanically Anisotropic Polysaccharide Composite Films Using Roll-Press Techniques

Natural polysaccharides are biocompatible and biodegradable; therefore, they can be used as feedstock for biodegradable structural materials and biomaterials. In this study, anisotropic polysaccharide composite films consisting of chondroitin sulfate C (CS) and chitosan (CHI) were fabricated from their polyion complex (PIC) gels by roll-press techniques. The obtained films (CS/CHI films) were thin and transparent, similar to the composite films prepared by hot-press techniques. The roll-press conditions were optimized, and it was observed that the molecular weight of CHI did not significantly affect the formability of the films, whereas the roll temperature and rolling speed were important. The tensile tests of the roll-pressed films revealed that the mechanical strength of the films in the mechanical direction (MD) was approximately 5 times higher than that in the transverse direction (TD), indicating that the roll-press techniques imparted mechanical anisotropy to the films. Additionally, the films shrank in the MD and expanded in the TD after immersion in aqueous solutions, followed by drying. Such anisotropic shrinking and expanding properties indicate that these films can be used as shape-memory materials.