Interactions of Apolipoproteins AI, AII, B and HDL, LDL, VLDL with Polyurethane and Polyurethane-PEO Surfaces

Mass-Spectrometric Identification of Proteins and Pathways Responsible for Fouling on Poly(ethylene glycol) Methacrylate Polymer Brushes

Prevention of fouling from proteins in blood plasma attracts significant efforts, and great progress is made in identifying surface coatings that display antifouling properties. In particular, poly(ethylene glycol) (PEG) is widely used and dense PEG-like cylindrical brushes of poly[oligo(ethylene glycol) methacrylate] (poly(OEGMA)) can drastically reduce blood plasma fouling. Herein, a comprehensive study of the variation of blood plasma fouling on this surface, including the analysis of the composition of protein deposits on poly(OEGMA) coatings after contact with blood plasma from many different donors, is reported. Correlation between the plasma fouling behavior and protein deposit composition points to the activation of the complement system as the main culprit of dramatically increased and accelerated deposition of blood plasma proteins on this type of antifouling coating, specifically through the classical pathway. These findings are consistent with observations on PEGylated drug carriers and highlight the importance of understanding the potential interactions between antifouling coatings and their environment.

The Relation Between Protein Adsorption and Hemocompatibility of Antifouling Polymer Brushes

Whenever an artificial surface comes into contact with blood, proteins are rapidly adsorbed onto its surface. This phenomenon, termed fouling, is then followed by a series of undesired reactions involving activation of complement or the coagulation cascade and adhesion of leukocytes and platelets leading to thrombus formation. Thus, considerable efforts are directed towards the preparation of fouling-resistant surfaces with the best possible hemocompatibility. Herein, a comprehensive hemocompatibility study after heparinized blood contact with seven polymer brushes prepared by surface-initiated atom transfer radical polymerization is reported. The resistance to fouling is quantified and thrombus formation and deposition of blood cellular components on the coatings are analyzed. Moreover, identification of the remaining adsorbed proteins is performed via mass spectroscopy to elucidate their influence on the surface hemocompatibility. Compared with an unmodified glass surface, the grafting of polymer brushes minimizes the adhesion of platelets and leukocytes and prevents the thrombus formation. The fouling from undiluted blood plasma is reduced by up to 99%. Most of the identified proteins are connected with the initial events of foreign body reaction towards biomaterial (coagulation cascade proteins, complement component, and inflammatory proteins). In addition, several proteins that are not previously linked with blood-biomaterial interaction are presented and discussed.

Aptamer/AuNPs encoders endow precise identification and discrimination of lipoprotein subclasses

Lipoproteins are composed of lipid and apolipoproteins in conjunction with noncovalent bonds. Different lipoprotein categories, particularly Low-Density Lipoprotein (LDL), High-Density Lipoprotein (HDL) and Very Low-Density Lipoprotein (VLDL) disagree in roles for the occurrence and development of cardiovascular disease, and their exact discrimination are critically required. Herein, a multiplexed sensor platform combined with an encoder system is introduced for accurate analysis of multiple lipoproteins in complex matrix. Three encoders, i.e., bare AuNPs, AuNPs-anti-LDL aptamer (AuNPs-apt) and AuNPs-non-aptamer DNA (AuNPs-n), facilitate precise discrimination for lipoprotein subclasses at a fairly low level of 0.490 nM. The binding of single-stranded DNA (ssDNA) with AuNPs prevents them from gathering in a relatively higher level of salt. In targets stimuli, the weaker binding between ssDNA and AuNPs is destroyed to certain degrees depending on the differential affinities among DNA, AuNPs, and multifarious proteins. It results in distinct aggregation states of encoders to cause diverse ultraviolet absorption, which may be statistically characterized to achieve highly facile and precise identification for lipoprotein subclasses. Remarkably, LDL at 0.05-37.5 μg/mL could be identified by the encoder system. 11 typical proteins including three lipoprotein subclasses in human serum were also precisely discriminated. Furthermore, the accurate identification of lipoprotein subclasses with different molar ratios from real clinical serum samples were obtained.

Complement Activation Dramatically Accelerates Blood Plasma Fouling On Antifouling Poly(2-hydroxyethyl methacrylate) Brush Surfaces

Non-specific protein adsorption (fouling) triggers a number of deleterious events in the application of biomaterials. Antifouling polymer brushes successfully suppress fouling, however for some coatings an extremely high variability of fouling for different donors remains unexplained. The authors report that in the case of poly(2-hydroxyethyl methacrylate) (poly(HEMA)) this variability is due to the complement system activation that causes massive acceleration in the fouling kinetics of blood plasma. Using plasma from various donors, the fouling kinetics on poly(HEMA) is analyzed and correlated with proteins identified in the deposits on the surface and with the biochemical compositions of the plasma. The presence of complement components in fouling deposits and concentrations of C3a in different plasmas indicate that the alternative complement pathway plays a significant role in the fouling on poly(HEMA) through the "tick-over" mechanism of spontaneous C3 activation. The generated C3b binds to the poly(HEMA) surface and amplifies complement activation locally. Heat-inactivated plasma prevents accelerated fouling kinetics, confirming the central role of complement activation. The results highlight the need to take into account the variability between individuals when assessing interactions between biomaterials and blood plasma, as well as the importance of the mechanistic insight that can be gained from protein identification.

Bio-inspired dual-functional phospholipid-poly(acrylic acid) brushes grafted porous poly(vinyl alcohol) beads for selective adsorption of low-density lipoprotein

Elevated levels of low-density lipoproteins (LDL) are recognized as a crucial indicator of hyperlipidemia (HLP) and lowering of LDL levels represents an effective clinical treatment strategy. Inspired by the conjugation of phospholipid monolayers and the lipid content of the LDL particle, the current study describes the preparation of an innovative hemoperfusion adsorbent. The adsorbent was prepared by attachment of phosphatidyl ethanolamine to poly(acrylic acid) modified poly(vinyl alcohol-co-triallyl isocyanurate) beads (PVA@PAA-PE). The interaction between LDL and adsorbent mimics the lipoprotein microemulsion present in the blood and thus promotes efficient binding with high affinity. In vitro adsorption using serum from patients with HLP revealed that the LDL adsorption of PVA@PAA-PE was 4.44 times higher than that of controls and the removal rate of LDL using PVA@PAA-PE was about twice as high as that of the anti-atherogenic high-density lipoprotein (HDL). In vivo whole blood perfusion demonstrated the superior affinity of PVA@PAA-PE for LDL since LDL concentration was significantly reduced from 10.71 ± 2.36 mmol L^-1 to 6.21 ± 1.45 mmol L^-1, while the HDL level was not severely reduced (from 0.98 ± 0.12 mmol L^-1 to 0.56 ± 0.15 mmol L^-1). Additionally, PVA@PAA-PE exhibited excellent hemocompatibility and low cytotoxicity. Therefore, PVA@PAA-PE is a potential adsorbent for whole blood perfusion to treat hyperlipidemia.

Combination of High Hydrostatic Pressure and Ultrafiltration to Generate a New Emulsifying Ingredient from Egg Yolk

Egg yolk granule phosvitin (45 kDa) is a phosphoprotein known for its emulsifying properties. Recently, high hydrostatic pressure (HHP) treatment of granule induced the transfer of phosvitin to the soluble plasma fraction. This project evaluated the performance of the ultrafiltration (UF) used to concentrate phosvitin from the plasma fraction to produce a natural emulsifier. Phosvitin was characterized in plasma from a pressure-treated granule (1.73 ± 0.07% w/w) and in its UF retentate (26.00 ± 4.12% w/w). The emulsifying properties of both retentates were evaluated. The emulsion prepared with phosvitin-enriched retentate was more resistant to flocculation and creaming. Confocal laser scanning microscopy showed a network of aggregated protein similar to a gel, which encapsulated oil droplets in emulsions made with UF-retentate of plasma from pressure-treated granule. However, although sodium dodecyl sulfate-polyacrylamide gel electrophoresis (SDS-PAGE) showed that β-phosvitin is recovered in the cream, it is difficult to attribute the improved emulsifying properties of the UF-retentate of plasma from pressure-treated granules only to phosvitin.

The blood compatibility challenge. Part 2: Protein adsorption phenomena governing blood reactivity

The adsorption of proteins is the initiating event in the processes occurring when blood contacts a "foreign" surface in a medical device, leading inevitably to thrombus formation. Knowledge of protein adsorption in this context has accumulated over many years but remains fragmentary and incomplete. Moreover, the significance and relevance of the information for blood compatibility are not entirely agreed upon in the biomaterials research community. In this review, protein adsorption from blood is discussed under the headings "agreed upon" and "not agreed upon or not known" with respect to: protein layer composition, effects on coagulation and complement activation, effects on platelet adhesion and activation, protein conformational change and denaturation, prevention of nonspecific protein adsorption, and controlling/tailoring the protein layer composition. STATEMENT OF SIGNIFICANCE: This paper is part 2 of a series of 4 reviews discussing the problem of biomaterial associated thrombogenicity. The objective was to highlight features of broad agreement and provide commentary on those aspects of the problem that were subject to dispute. We hope that future investigators will update these reviews as new scholarship resolves the uncertainties of today.

Influence of dynamic flow conditions on adsorbed plasma protein corona and surface-induced thrombus generation on antifouling brushes

The information regarding the nature of protein corona (and its changes) and cell binding on biomaterial surface under dynamic conditions is critical to dissect the mechanism of surface-induced thrombosis. In this manuscript, we investigated the nature of protein corona and blood cell binding in heparinized recalcified human plasma, platelet rich plasma and whole blood on three highly hydrophilic antifouling polymer brushes, (poly(N, N-dimethylacrylamide) (PDMA), poly(2-methacryloyloxyethyl phosphorylcholine) (PMPC) and poly[N-(2-hydroxypropyl) methacrylamide] (PHPMA) using an in vitro blood loop model at comparable arterial and venous flow, and static conditions. A fluid dynamics model was used initially to better understand the resulting flow patterns in a vertical channel containing the substrates to arrive at the placement of the substrates within the blood loop. The protein binding on the brush modified substrates was determined using ellipsometry, fluorescence microscopy and the nature of the protein corona was investigated using mass spectrometry based proteomics. The flow elevated fouling on brush coated surface from blood. The extent of plasma protein adsorption and platelet adhesion onto PDMA brush was lower than other surfaces in both static and flow conditions. The profiles of adsorbed protein corona showed strong dependence on the test conditions (static vs. flow), and the chemistry of the polymer brushes. Specially, the PDMA brush under flow conditions was more enriched with coagulation proteins, complement proteins, vitronectin and fibronectin but was less enriched with serum albumin. Apolipoprotein B-100 and complement proteins were the most abundant proteins seen on PMPC and PHPMA surfaces under both flow and static conditions, respectively. Unlike PDMA brush, the flow conditions did not affect the composition of protein corona on PMPC and PHPMA brushes. The nature of the protein corona formed in flow conditions influenced the platelet and red blood cell binding. The dependence of shear stress on platelet adhesion from platelet rich plasma and whole blood highlights the contribution of red blood cells in enhancing platelet adhesion on the surface under high shear condition.