Silica Ouzo Effect: Amphiphilic Drugs Facilitate Nanoprecipitation of Polycondensed Mercaptosilanes

Synthetic strategies for nonporous organosilica nanoparticles from organosilanes

Organosilica nanoparticles refer to silica nanoparticles containing carbon along with organic or functional groups and can be divided into mesoporous organosilica nanoparticles and nonporous organosilica nanoparticles. During the past few decades, considerable efforts have been devoted to the development of organosilica nanoparticles directly from organosilanes. However, most of the reports have focused on mesoporous organosilica nanoparticles, while relatively few are concerned with nonporous organosilica nanoparticles. The synthesis of nonporous organosilica nanoparticles typically involves (i) self-condensation of an organosilane as the single source, (ii) co-condensation of two or more types of organosilanes, (iii) co-condensation of tetraalkoxysilane and an organosilane, and (iv) spontaneous emulsification and the subsequent radical polymerization of 3-(trimethoxysilyl)propyl methacrylate (TPM). This article aims to provide a review on the synthetic strategies of this important type of colloidal particle, followed by a brief discussion on their applications and future perspectives.

Stable Encapsulation of Methylene Blue in Polysulfide Organosilica Colloids for Fluorescent Tracking of Nanoparticle Uptake in Cells

Methylene blue (MB), a century-old drug and a fluorescent dye, has a long history of diverse applications, both in drug therapy and as a tissue-staining agent. However, MB is inherently unstable when exposed to light and reducing agents. In this study, we aim to prepare and characterize polysulfide-based organosilica colloidal particles for efficient, stable, and protective encapsulation of MB. Disulfide- and tetrasulfide-containing organosilane congeners were used as organosilica precursors for direct synthesis of organosilica colloids based on the silica ouzo effect. MB was spontaneously entrapped into the colloidal particles during the particle formation process. The following properties of the colloidal MB were evaluated: particle size, surface charge, atomic distribution, encapsulation efficiency, MB release, photodynamic activity, thiol and ascorbate reactivity, and cytotoxicity. The DLS measurements show that the size of colloidal MB is tunable in a range of 100 nm to 1 μm. SEM images reveal spherical particles with composition-dependent particle sizes of 70-120 nm (coefficient of variation: 15-18%). MB was encapsulated in the colloidal particles with a maximal efficiency of 95%. The release of MB from the colloids was <1% at 4 h and <3.5% at 48 h. The colloidal particles show much reduced photodynamic activity, low reactivity toward reducing agents, and low cytotoxicity. Accordingly, the colloidal MB was proposed and further investigated as a fluorescent particle tracer for the study of cell-nanoparticle interactions. In conclusion, MB can be efficiently and stably loaded into polysulfide organosilica colloidal particles using a simple and convenient physical route.

Thiolated polymers: Bioinspired polymers utilizing one of the most important bridging structures in nature

Thiolated polymers designated "thiomers" are obtained by covalent attachment of thiol functionalities on the polymeric backbone of polymers. In 1998 these polymers were first described as mucoadhesive and in situ gelling compounds forming disulfide bonds with cysteine-rich substructures of mucus glycoproteins and crosslinking through inter- and intrachain disulfide bond formation. In the following, it was shown that thiomers are able to form disulfides with keratins and membrane-associated proteins exhibiting also cysteine-rich substructures. Furthermore, permeation enhancing, enzyme inhibiting and efflux pump inhibiting properties were demonstrated. Because of these capabilities thiomers are promising tools for drug delivery guaranteeing a strongly prolonged residence time as well as sustained release on mucosal membranes. Apart from that, thiomers are used as drugs per se. In particular, for treatment of dry eye syndrome various thiolated polymers are in development and a first product has already reached the market. Within this review an overview about the thiomer-technology and its potential for different applications is provided discussing especially the outcome of studies in non-rodent animal models and that of numerous clinical trials. Moreover, an overview on product developments is given.

Kinetics of fluoride-catalysed synthesis of organosilica colloids in aqueous solutions of amphiphiles

Reactions involving hydrophobic reactants in water can be much accelerated in organic solvent-free solutions containing amphiphiles at neutral pH and room temperature. Previously, we demonstrated that organosilica colloidal particles could be conveniently synthesized by a versatile salt-catalysis method in solutions modified with various amphiphilic molecules. The method precludes the use of any solvent, any added form of energy (thermal or mechanical), and any strong (or hazardous) acids/bases. Herein, the kinetic properties of the reaction were systematically investigated for fluoride-catalysed synthesis of colloidal organosilica from a thiol-functionalized organosilane precursor, (3-mercaptopropyl)trimethoxysilane. Continuous, real-time ATR-FTIR measurements allowed probing the time evolution of organosilica condensation in different reaction systems, containing one of the following: non-ionic surfactants (Tween 20, Tween 40, Tween 60, Tween 80, Triton X-100), anionic surfactant (sodium dodecyl sulphate; SDS), cationic surfactant (cetyltrimethylammonium bromide; CTAB), and amphiphilic polymers (polyvinyl alcohol and polyvinylpyrrolidone). Overall, while some amphiphile-specific properties were revealed, fluoride-catalysed synthesis was ultrafast with a universal two-phase kinetic scheme (e.g. transition within 5–10 min) for all amphiphiles studied.

Systematic real-time ATR-FTIR studies reveal ultrafast two-phase kinetics of sodium fluoride-catalysed synthesis of organosilica colloids in purely aqueous, amphiphile-assisted systems.

Formation of organosilica nanoparticles with dual functional groups and simultaneous payload entrapment

A mixed organosilane system for simultaneous formation of organosilica nanoparticles has been systematically studied for loading of various compounds with a wide range of log P values. The molecule-entrapping system was understood by investigating the effects of adjusting various experimental parameters on particle formation and molecule entrapment. Particularly, rhodamine 6 G (R6G) loaded colloidal particles were prepared and characterised in detail. The results show that whereas most molecules had entrapment efficiency (EE%) in the range of 20-80%, R6G exhibited near 100% efficiency. Moreover, the colloidal system can be tuned to incorporate R6G with the extent of entrapment spanning at least 2 orders of magnitude (i.e. from 0.04 to 4 mg) and a maximum EE% of 98%. In conclusion, the study demonstrates the promise of the proposed mixed organosilane system in forming colloidal particles containing multiple functional groups with selective loading of highly hydrophobic molecules.

S-Nitrosothiols (SNO) as light-responsive molecular activators for post-synthesis fluorescence augmentation in fluorophore-loaded nanospheres

For the first time S-nitrosothiol is engineered into fluorophore-loaded silica nanospheres for post-synthesis, light-triggered fluorescence augmentation.

From a silane monomer to anisotropic buckled silica nanospheres: a polymer-mediated, solvent-free and one-pot synthesis

The morphology of particles, along with other particle attributes, has been shown to affect the biological fate of particles administered into the body. Particles with collapsed surfaces or shells (dimpled, buckled or crumpled) can have different appearances, under the microscope, that resemble many things encountered in our daily life, such as apples/cherries, doughnuts, and bowls. Recent studies have demonstrated that they are not just particles with interesting geometries, but they can also be used as functional blocks for assembled complex materials. Since previous research focus has been on micron-sized particles and organic solvents were often used, it is of particular interest to synthesize the nanosized counterpart with a buckled surface using a purely aqueous method. Herein we report a facile method for rapid synthesis of buckled silica nanoparticles (SiNPs) based on S-nitrosothiol chemistry in a solvent-free reaction. 3-Mercaptopropyl trimethoxysilane (MPTMS) was used as a single silane source in a one-pot aqueous solution containing sodium nitrite and polyvinyl alcohol (PVA). Upon the addition of HCl, S-nitrosation and condensation of MPTMS occur simultaneously and the reaction system undergoes a rapid transition from a clear solution to a solution containing nanoparticles with a lag time controlled mainly by the amount of HCl added. The experimental parameters were systematically studied to determine the optimal concentration of each component. For a typical reaction, sub-100 nm nanoparticles can be produced in less than 1 h, and the best result can be obtained within 2 to 4 h. Remarkably, the nanoparticle exhibits buckled surface morphologies under TEM and SEM. The average size is about 60 nm in diameter. Moreover, the solid-state Si-NMR data show that T² and T³ silicon species are rapidly evolved with slight dynamic changes over the reaction time. Further, PVA is shown to control the surface buckling as well as to stabilize the formed particles. The as-prepared SiNPs can be used as a nitric oxide (NO) carrier with the potential to release NO in an apparent zero-order manner. In conclusion, the study demonstrates the feasibility of employing an aqueous route for efficiently preparing SiNPs with multifarious surface cavities based on S-nitrosothiol chemistry.