Free-Standing, Nanopatterned Janus Membranes of Conducting Polymer-Virus Nanoparticle Arrays

Superhydrophobic-Substrate-Assisted Construction of Free-Standing Microcavity-Patterned Conducting Polymer Films

Patterned conducting polymer films with unique structures have promising prospects for application in various fields, such as actuation, water purification, sensing, and bioelectronics. However, their practical application is hindered because of the limitations of existing construction methods. Herein, a strategy is proposed for the superhydrophobic-substrate-assisted construction of free-standing 3D microcavity-patterned conducting polymer films (McPCPFs) at micrometer resolution. Easy-peeling and nondestructive transfer properties are achieved through electrochemical polymerization along the solid/liquid/gas triphase interface on micropillar-structured substrates. The effects of the wettability and geometrical parameters of the substrates on the construction of McPCPFs are systematically investigated in addition to the evolution of the epitaxial growth along the triphase interface at different polymerization times. The McPCPFs can be easily peeled from superhydrophobic surfaces using ethanol because of weak adhesion and nondestructively transferred to various substrates taking advantage of the capillarity. Furthermore, sensitive light-driven McPCPF locomotion on organic liquid surfaces is demonstrated. Ultimately, a facile strategy for the construction of free-standing 3D microstructure-patterned conducting polymer films is proposed, which can improve productivity and applicability of the films in different fields and expand the application scope of superwettable interfaces.

Temperature and pH Responsive Janus Silica Nanoplates Prepared by the Sol-Gel Process and Postmodification

During the process of emulsifying and hydrolyzing, reactive poly(3-(triethoxysilyl)propyl methacrylate)-b-polystyrene (PTEPM-b-PS) diblock copolymers can self-assemble and become cross-linked to form hollow spheres in situ with polystyrene on their inner surfaces. The addition of tetraethoxysilane (TEOS), which was hydrolyzed and condensed together with PTEPM block, can make those spheres as soft foldable capsules or hard hollow spheres depending on the amount of added TESO. Then postmodification, the surface-initiated Atom Transfer Radical Polymerization (ATRP) was applied to afford stimuli-responsive spheres, and the corresponding responsive Janus nanoplates (RJPs) were finally obtained by crushing those responsive hollow spheres (HSs) showing smart tunable emulsifiability and great potential in oily water purification. This facile method to fabricate HSs and RJPs could be used for preparing different Janus polymer-inorganic capsules and nanoplates with varied functions by changing the chemical composition of copolymer surfactants as well as the postmodification process.

Field-Effect Sensors for Virus Detection: From Ebola to SARS-CoV-2 and Plant Viral Enhancers

Coronavirus disease 2019 (COVID-19) is a novel human infectious disease provoked by severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2). Currently, no specific vaccines or drugs against COVID-19 are available. Therefore, early diagnosis and treatment are essential in order to slow the virus spread and to contain the disease outbreak. Hence, new diagnostic tests and devices for virus detection in clinical samples that are faster, more accurate and reliable, easier and cost-efficient than existing ones are needed. Due to the small sizes, fast response time, label-free operation without the need for expensive and time-consuming labeling steps, the possibility of real-time and multiplexed measurements, robustness and portability (point-of-care and on-site testing), biosensors based on semiconductor field-effect devices (FEDs) are one of the most attractive platforms for an electrical detection of charged biomolecules and bioparticles by their intrinsic charge. In this review, recent advances and key developments in the field of label-free detection of viruses (including plant viruses) with various types of FEDs are presented. In recent years, however, certain plant viruses have also attracted additional interest for biosensor layouts: Their repetitive protein subunits arranged at nanometric spacing can be employed for coupling functional molecules. If used as adapters on sensor chip surfaces, they allow an efficient immobilization of analyte-specific recognition and detector elements such as antibodies and enzymes at highest surface densities. The display on plant viral bionanoparticles may also lead to long-time stabilization of sensor molecules upon repeated uses and has the potential to increase sensor performance substantially, compared to conventional layouts. This has been demonstrated in different proof-of-concept biosensor devices. Therefore, richly available plant viral particles, non-pathogenic for animals or humans, might gain novel importance if applied in receptor layers of FEDs. These perspectives are explained and discussed with regard to future detection strategies for COVID-19 and related viral diseases.

Application of Plant Viruses as a Biotemplate for Nanomaterial Fabrication

Viruses are widely used to fabricate nanomaterials in the field of nanotechnology. Plant viruses are of great interest to the nanotechnology field because of their symmetry, polyvalency, homogeneous size distribution, and ability to self-assemble. This homogeneity can be used to obtain the high uniformity of the templated material and its related properties. In this paper, the variety of nanomaterials generated in rod-like and spherical plant viruses is highlighted for the cowpea chlorotic mottle virus (CCMV), cowpea mosaic virus (CPMV), brome mosaic virus (BMV), and tobacco mosaic virus (TMV). Their recent studies on developing nanomaterials in a wide range of applications from biomedicine and catalysts to biosensors are reviewed.

Dual-template docking oriented ionic imprinted bilayer mesoporous films with efficient recovery of neodymium and dysprosium

Rare earth elements (REEs) are critical materials to many cutting-edge technologies but are difficult to separate from one another because of their chemical similarity. We present ionic imprinted mesoporous bilayer films (IIBFs) as an ideal adsorbent for selective separation of neodymium (Nd) and dysprosium (Dy) from sintered neodymium magnets. IIBFs were prepared according to dual-template docking oriented ionic imprinting (DTD-OII). Due to different imprinted compositions of bilayer films, IIBFs exhibited high specific surface area, fast binding equilibrium, and Janus properties for simultaneous selective adsorption of different rare earth ions, which made our imprinted bilayer mesoporous films a specialized adsorbent for adsorption of Nd(III) and Dy(III) at the same time. The adsorption capacities of optimized IIBFs were 17.50 mg g^-1 for Dy(III) and 12.15 mg g^-1 for Nd(III) at pH = 4.0. Moreover, we grafted thermo-responsive polymer on the one surface of IIBFs to realize controlled release of Nd(III) and Dy(III) by temperature. IIBFs demonstrate a high degree of reusability by cycling experiments by DTD-OII, which develop their promising applications for the REE recycling and separation industry.

Rational design of materials interface at nanoscale towards intelligent oil-water separation

Oil-water separation is critical for the water treatment of oily wastewater or oil-spill accidents. The oil contamination in water not only induces severe water pollution but also threatens human beings' health and all living species in the ecological system. To address this challenge, different nanoscale fabrication methods have been applied for endowing biomimetic porous materials, which provide a promising solution for oily-water remediation. In this review, we present the state-of-the-art developments in the rational design of materials interface with special wettability for the intelligent separation of immiscible/emulsified oil-water mixtures. A mechanistic understanding of oil-water separation is firstly described, followed by a summary of separation solutions for traditional oil-water mixtures and special oil-water emulsions enabled by self-amplified wettability due to nanostructures. Guided by the basic theory, the rational design of interfaces of various porous materials at nanoscale with special wettability towards superhydrophobicity-superoleophilicity, superhydrophilicity-superoleophobicity, and superhydrophilicity-underwater superoleophobicity is discussed in detail. Although the above nanoscale fabrication strategies are able to address most of the current challenges, intelligent superwetting materials developed to meet special oil-water separation demands and to further promote the separation efficiency are also reviewed for various special application demands. Finally, challenges and future perspectives in the development of more efficient oil-water separation materials and devices by nanoscale control are provided. It is expected that the biomimetic porous materials with nanoscale interface engineering will overcome the current challenges of oil-water emulsion separation, realizing their practical applications in the near future with continuous efforts in this field.

Viral-based nanomaterials for plasmonic and photonic materials and devices

Over the last decade, viruses have established themselves as a powerful tool in nanotechnology. Their proteinaceous capsids benefit from biocompatibility, chemical addressability, and a variety of sizes and geometries, while their ability to encapsulate, scaffold, and self-assemble enables their use for a wide array of purposes. Moreover, the scaling up of viral-based nanotechnologies is facilitated by high capsid production yield and speed, which is particularly advantageous when compared with slower and costlier lithographic techniques. These features enable the bottom-up fabrication of photonic and plasmonic materials, which relies on the precise arrangement of photoactive material at the nanoscale to control phenomena such as electromagnetic wave propagation and energy transfer. The interdisciplinary approach required for the fabrication of such materials combines techniques from the life sciences and device engineering, thus promoting innovative research. Materials with applications spanning the fields of sensing (biological, chemical, and physical sensors), nanomedicine (cellular imaging, drug delivery, phototherapy), energy transfer and conversion (solar cells, light harvesting, photocatalysis), metamaterials (negative refraction, artificial magnetism, near-field amplification), and nanoparticle synthesis are considered with exclusive emphasis on viral capsids and protein cages. This article is categorized under: Biology-Inspired Nanomaterials > Protein and Virus-Based Structures.

Nanomanufacture of Free-Standing, Porous, Janus-Type Films of Polymer-Plant Virus Nanoparticle Arrays

We present a facile method for preparing hierarchical assemblies of cowpea mosaic virus (CPMV) nanoparticles adsorbed onto patterned polypyrrole copolymer arrays, which can be released as a freely standing and microporous polymer-protein membrane with a Janus-type structure. The patterning protocol is based on colloidal sphere lithography wherein a sacrificial honeycomb pattern composed of colloidal polystyrene (PS) microspheres is assembled on an electrode. A thin layer of polypyrrole film is electropolymerized within the interstices of the template and monitored using an electrochemical quartz crystal microbalance with dissipation (EC-QCM-D) and microscopy. Dissolving the PS template reveals an inverse opaline pattern capable of electrostatically capturing the CPMV particles. Through an electrochemical trigger, the polypyrrole-CPMV delaminates from the surface producing a self-sustaining polymer-protein membrane that can potentially be used for sensing and nanocargo applications.

Stimuli Responsive Polymer-Based 3D Optical Crystals for Sensing

3D optical crystals have found their applications in sensing, actuation, optical devices, batteries, supercapacitors, etc. The 3D optical crystal devices are comprised of two main components: colloidal gels and nanoparticles. Nanoparticles self-assemble into face center cubic structures in colloidal gels. The inherent 3D optical crystal structure leads to display of structural colors on these devices following light impingement. As such, these optical properties have led to the utilization of these 3D optical crystals as self-reporting colorimetric sensors, which is the focus of this review paper. While there is extensive work done so far on these materials to exhaustively be covered in this review, we focus here in on: mechanism of color display, materials and preparation of 3D optical crystals, introduction of recent sensing examples, and combination of 3D optical crystals with molecular imprinting technology. The aim of this review is to familiarize the reader with recent developments in the area and to encourage further research in this field to overcome some of its challenges as well as to inspire creative innovations of these materials.

Electrostatic layer-by-layer construction of fibrous TMV biofilms

As nature's choice in designing complex architectures, the bottom-up assembly of nanoscale building blocks offers unique solutions in achieving more complex and smaller morphologies with wide-ranging applications in medicine, energy, and materials science as compared to top-down manufacturing. In this work, we employ charged tobacco mosaic virus (TMV-wt and TMV-lys) nanoparticles in constructing multilayered fibrous networks via electrostatic layer-by-layer (LbL) deposition. In neutral aqueous media, TMV-wt assumes an anionic surface charge. TMV-wt was paired with a genetically engineered TMV-lys variant that displays a corona of lysine side chains on its solvent-exposed surface. The electrostatic interaction between TMV-wt and TMV-lys nanoparticles became the driving force in the highly controlled buildup of the multilayer TMV constructs. Since the resulting morphology closely resembles the 3-dimensional fibrous network of an extracellular matrix (ECM), the capability of the TMV assemblies to support the adhesion of NIH-3T3 fibroblast cells was investigated, demonstrating potential utility in regenerative medicine. Lastly, the layer-by-layer deposition was extended to release the TMV scaffolds as free-standing biomembranes. To demonstrate potential application in drug delivery or vaccine technology, cargo-functionalized TMV biofilms were programmed.

Surface enhancement of a molecularly imprinted polymer film using sacrificial silica beads for increasingl-arabitol chemosensor sensitivity and detectability

Sacrificial silica beads, used for increasing the specific surface area of a molecularly imprinted polymer film, improve the performance of the chemosensor.