Effect of Substrate Morphology on the Odd-Even Effect in Hydrophobicity of Self-Assembled Monolayers

Interfacial Water-Dictated Oil Adhesion Based on Ion Modulation

Oil adhesion on ionic surfaces is ubiquitous in organisms and natural environments and is generally determined by surface chemical component and texture. However, when adhesion occurs, water molecules at the solid-liquid interface, acting as a bridge not only influenced by the structure and composition of the solid surface but also interacting with the neighboring oil molecules, play a crucial role but are always overlooked. Herein, we investigate the oil adhesion process on a carboxyl-terminated self-assembled monolayer surface (COOH-SAM) in ionic solutions and observe the interfacial water structure via surface-enhanced Raman scattering (SERS) in this system. It is found that the lower the tetracoordinated water content, the stronger the oil adhesion. Compared to monovalent ions, the strengthened binding of multivalent ions to the COOH-SAM surface makes the interfacial water more disordered, which eventually leads to a stronger oil adhesion. Notably, the amount of oil adhesion decreases with an increase in the thickness of the interfacial water region. The interfacial water-dictated oil adhesion has been demonstrated in capillary to simulate the water-driven oil recovery, providing a molecular-level explanation for enhanced oil recovery from low salinity water flooding and also indicating potential applications in intelligent microfluidic and seawater desalination.

Optimization of Nanosubstrates toward Molecularly Surface-Functionalized Raman Spectroscopy

Diagnostic advancements require continuous developments of reliable analytical sensors, which can simultaneously fulfill many criteria, including high sensitivity and specificity for a broad range of target analytes. Incorporating the highly sensitive attributes of surface-enhanced Raman spectroscopy (SERS) combined with highly specific analyte recognition capabilities via molecular surface functionalization could address major challenges in molecular diagnostics and analytical spectroscopy fields. Herein, we have established a controllable molecular surface functionalization process for a series of textured gold surfaces. To create the molecularly surface-functionalized SERS platforms, self-assembled benzyl-terminated and benzoboroxole-terminated monolayers were used to compare which thicknesses and root-mean-square (RMS) roughness of planar gold produced the most sensitive and specific surfaces. Optimal functionalization was identified at 80 ± 8 nm thickness and 7.2 ± 1.0 nm RMS. These exhibited a considerably higher SERS signal (70-fold) and improved sensitivity for polysaccharides when analyzed using principal component analysis (PCA) and self-organizing maps (SOM). These findings lay the procedure for establishing the optimal substrate specifications as an essential prerequisite for future studies aiming at developing the feasibility of molecular imprinting for SERS diagnostic applications and the subsequent delivery of advanced, highly selective, and sensitive sensing devices and analytical platforms.

Role of Nanoscale Roughness and Polarity in Odd–Even Effect of Self‐Assembled Monolayers

The dependency of substrate roughness on wetting properties of self‐assembled monolayers (SAMs) has been studied extensively, but most previous studies used limited selection of probing liquid and range of surface roughness. These studies disregarded the limit to observation of sub‐nanometer odd–even parity effect, hence are inconclusive. In this work we report the role of solvent polarity on the roughness‐dependency of wetting behavior of SAMs by studying static con‐tact angle of a variety of probing liquids, with different polarities, on SAMs formed on Ag‐based substrate with different surface morphology. By overlapping the roughness ranges with previous studies on Au, the limitation of surface roughness (RMS=1 nm) to observation of the odd–even effect using water as probing liquid was confirmed, but other probing liquid yielded different roughness‐dependent behaviors, with more polar solvent showing more roughness‐dependent behavior. Based on these observations, we concluded that there exists a phase‐transition like behavior in SAMs due to substrate roughness and molecule chain length, but whose determination is dependent on the probing liquid.

Odd-Even Effect in Peptide SAMs-Competition of Secondary Structure and Molecule-Substrate Interaction

Peptide-based self-assembled monolayers (SAMs) are well known to be crucial for biocompatible surface formation on inorganic substrates applied for implants, biosensors, or tissue engineering. Moreover, recently these bioinspired nanostructures are also considered particularly interesting for molecular electronics applications due to their surprisingly high conductance and thickness-independent capacitance, which make them a very promising element of organic field-effect transistors (OFETs). Our structural analysis conducted for a series of prototypic homooligopeptides based on glycine (Gly) with cysteine (Cys) as a substrate bonding group chemisorbed on Au and Ag metal substrates (Gly_nCys/Au(Ag), n = 1–9) exhibits the formation by these monolayers secondary structure close to β-sheet conformation with pronounced odd–even structural effect strongly affecting packing density and conformation of molecules in the monolayer, which depend on the length of molecules and the type of metal substrate. Our experiments indicate that the origin of these structural effects is related to the either cooperative or competitive relationship between the type of secondary structure formed by these molecules and the directional character of their chemical bonding to the metal substrate. The current analysis opens up the opportunity for the rational design of these biologically inspired nanostructures, which is crucial both for mentioned biological and electronic applications.

Molecular Conformation in Charge Tunneling across Large-Area Junctions

Self-assembled monolayers are predicated on thermodynamic equilibrium; hence, their properties project accessible relaxation pathways. Herein, we demonstrate that charge tunneling correlates with conformational degrees of freedom(s). Results from open chain and cyclic head groups show that, as expected, distribution in tunneling data correlates with the orientation of the head group, akin to the odd-even effect and more importantly the degree of conformational freedom, but fluctuates with applied bias. Trends in nature of distributions in current density illuminate the need for higher statistical moments in understanding these rather dynamic systems. We employ skewness, kurtosis, and estimation plots to show that the conformational degree of freedom in the head group significantly amplifies the odd-even effect and may lead to enhanced or perturbed tunneling based on whether the head group is on an odd- or even-parity spacer.

Formation of Self-Assembled Anticorrosion Films on Different Metals

The review will first discuss shortly the phenomenon of corrosion and enroll some general possibilities to decrease the rate of this deterioration. The stress will be laid upon the presentation of anticorrosive self-assembled molecular (SAM) layers as well as on the preparation technology that is a simple technique, does not need any special device, and can be applied on different solids (metals or non-metals) alone or in combination. The paper groups the chemicals (mainly amphiphiles) that can develop nanolayers on different pure or oxidized metal surfaces. The history of the self-assembled molecular layer will be discussed from the beginning of the first application up to now. Not only the conditions of the nanofilm preparation as well as their characterization will be discussed, but the methods that can evaluate the corrosion-inhibiting efficiency of the SAM layers under a corrosive environment will be demonstrated as well.

Molecular Origin of the Odd-Even Effect of Macroscopic Properties of n-Alkanethiolate Self-Assembled Monolayers: Bulk or Interface?

Elucidating the influence of the monolayer interface versus bulk on the macroscopic properties (e.g., surface hydrophobicity, charge transport, and electron transfer) of organic self-assembled monolayers (SAMs) chemically anchored to metal surfaces is a challenge. This article reports the characterization of prototypical SAMs of n-alkanethiolates on gold (CH₃(CH₂)_nSAu, n = 6-19) at the macroscopic scale by electrochemical impedance spectroscopy and contact angle goniometry, and at the molecular level, by infrared reflection absorption spectroscopy. The SAM capacitance, dielectric constant, and surface hydrophobicity exhibit dependencies on both the length (n) and parity (n_odd or n_even) of the polymethylene chain. The peak positions of the CH₂ stretching modes indicate a progressive increase in the chain conformational order with increasing n between n = 6 and 16. SAMs of n_odd have a greater degree of structural gauche defects than SAMs of n_even. The peak intensities and positions of the CH₃ stretching modes are chain length independent but show an odd-even alternation of the spatial orientation of the terminal CH₃. The correlations between the different data trends establish that the chain length dependencies of the dielectric constant and surface hydrophobicity originate from changes in the polymethylene chain conformation (bulk), while the odd-even variation arises primarily from a difference in the chemical composition of the interface related to the terminal group orientation. These findings provide new physical insights into the structure-property relation of SAMs for the design of ultrathin film dielectrics as well as the understanding of stereostructural effects on the electrical characteristics of tunnel junctions.

Understanding interface (odd–even) effects in charge tunneling using a polished EGaIn electrode

Charge transport across large area molecular tunneling junctions is widely studied due to its potential in the development of quantum electronic devices.

Properties of Self-Assembled Monolayers Revealed via Inverse Tensiometry

Self-assembled monolayers (SAMs) have emerged as a simple platform technology and hence have been broadly studied. With advances in state-of-the-art fabrication and characterization methods, new insights into SAM structure and related properties have been delineated, albeit with some discrepancies and/or incoherencies. Some discrepancies, especially between experimental and theoretical work, are in part due to the misunderstanding of subtle structural features such as phase evolution and SAM quality. Recent work has, however, shown that simple techniques, such as the measurement of static contact angles, can be used to delineate otherwise complex properties of the SAM, especially when complemented by other more advanced techniques. In this article, we highlight the effect of nanoscale substrate asperities and molecular chain length on the SAM structure and associated properties. First, surfaces with tunable roughness are prepared on both Au and Ag, and their corresponding n-alkanethiolate SAMs are characterized through wetting and spectroscopy. From these data, chain-length- and substrate-morphology-dependent limits to the odd-even effect (structure and properties vary with the number of carbons in the molecules and the nature of the substrate), parametrization of gauche defect densities, and structural phase evolution (liquidlike, waxy, crystalline interfaces) are deduced. An evaluation of the correlation between the effect of roughness and the components of surface tension (polar-γ^p and dispersive-γ^d) reveals that wetting, at nanoscale rough surfaces, evolves proportionally with the ratio of the two components of surface tension. The evolution of conformational order is captured over a range of molecular lengths and parametrized through a dimensionless number, χ_c. By deploying a well-known tensiometry technique (herein the liquid is used to characterize the solid, hence the term inverse tensiometry) to characterize SAMs, we demonstrate that complex molecular-level phenomena in SAMs can be understood through simplicity.

Quantifying Gauche Defects and Phase Evolution in Self-Assembled Monolayers through Sessile Drops

Self-assembled monolayers (SAMs) are widely used in surface modifications, specifically in tuning the surface chemistry of materials. The structure and properties of SAMs have been extensively studied often with sophisticated tools, even for the simplest n-alkanethiolate SAMs. In SAMs, especially in linear n-alkanethiolates, the properties are dependent on the chain length, which is best manifested in the so-called odd-even effect, a simple yet not fully understood phenomenon. One main challenge is fully delineating the origin of length-dependent properties, which can be due to the structure (ideal SAMs), defect evolution, or substrate-molecule effects. This study demonstrates that utilizing the wetting behavior of polar (water) and nonpolar (hexadecane (HD)) solvents on n-alkanethiolate SAMs formed on ultraflat gold and silver surfaces, the evolution of chain-length-dependent gauche defects can be revealed and parameterized through a newly defined dimensionless number (χ). The observation of the odd-even effect in hydrophobicity, however, depends on the thiol chain length, and it was only observed on longer-chain (>C₈) molecules. The trend in this odd-even effect demonstrates that there are three main transitions in the nature of wetting, hence structure, across n-alkanethiols. From wetting with HD, the role of dispersive components in wetting reveal that the SAMs are dynamic, which we attribute to rotations associated with previously reported evolution in gauche defects and changes in packing density. Therefore, from re-expression of the Young-Dupre equation, we define a new dimensionless number associated with molecular conformations, whose periodicity mirrors the energetics of Goodman's conformations of n-alkanes in unbound states and associated four- or two-twist turns. Therefore, we infer that the evolution in surface energy is largely due to molecular conformations and associated relaxations of the bound thiolates.

Spectroscopic evidence for the origin of odd–even effects in self-assembled monolayers and effects of substrate roughness

This paper reports the effects of substrate roughness on the odd–even effect in n-alkanethiolate self-assembled monolayers (SAMs) probed by vibrational sum frequency generation (SFG) spectroscopy.