Phase Transitions in DNA/Surfactant Adsorption Layers

DNA Penetration into a Lysozyme Layer at the Surface of Aqueous Solutions

The interactions of DNA with lysozyme in the surface layer were studied by performing infrared reflection-absorption spectroscopy (IRRAS), ellipsometry, surface tensiometry, surface dilational rheology, and atomic force microscopy (AFM). A concentrated DNA solution was injected into an aqueous subphase underneath a spread lysozyme layer. While the optical properties of the surface layer changed fast after DNA injection, the dynamic dilational surface elasticity almost did not change, thereby indicating no continuous network formation of DNA/lysozyme complexes, unlike the case of DNA interactions with a monolayer of a cationic synthetic polyelectrolyte. A relatively fast increase in optical signals after a DNA injection under a lysozyme layer indicates that DNA penetration is controlled by diffusion. At low surface pressures, the AFM images show the formation of long strands in the surface layer. Increased surface compression does not lead to the formation of a network of DNA/lysozyme aggregates as in the case of a mixed layer of DNA and synthetic polyelectrolytes, but to the appearance of some folds and ridges in the layer. The formation of more disordered aggregates is presumably a consequence of weaker interactions of lysozyme with duplex DNA and the stabilization, at the same time, of loops of unpaired nucleotides at high local lysozyme concentrations in the surface layer.

DNA Interaction with a Polyelectrolyte Monolayer at Solution-Air Interface

The formation of ordered 2D nanostructures of double stranded DNA molecules at various interfaces attracts more and more focus in medical and engineering research, but the underlying intermolecular interactions still require elucidation. Recently, it has been revealed that mixtures of DNA with a series of hydrophobic cationic polyelectrolytes including poly(N,N-diallyl-N-hexyl-N-methylammonium) chloride (PDAHMAC) form a network of ribbonlike or threadlike aggregates at the solution—air interface. In the present work, we adopt a novel approach to confine the same polyelectrolyte at the solution—air interface by spreading it on a subphase with elevated ionic strength. A suite of techniques–rheology, microscopy, ellipsometry, and spectroscopy–are applied to gain insight into main steps of the adsorption layer formation, which results in non-monotonic kinetic dependencies of various surface properties. A long induction period of the kinetic dependencies after DNA is exposed to the surface film results only if the initial surface pressure corresponds to a quasiplateau region of the compression isotherm of a PDAHMAC monolayer. Despite the different aggregation mechanisms, the micromorphology of the mixed PDAHMAC/DNA does not depend noticeably on the initial surface pressure. The results provide new perspective on nanostructure formation involving nucleic acids building blocks.

Extension of "Interfacial Adsorption Denaturation" Behavior Interpretation Based on Gibbs Monolayer Formation by Biomolecules

Using glucose oxidase and salmon testis-derived DNA molecules, we sought to extend the recently proposed idea of interfacial adsorption denaturation. The surface pressure-time (π-t) isotherm of the glucose oxidase Gibbs monolayer exhibited a rapid increase in surface pressure and a relatively prompt transition to a liquid condensed film. The appearance of this rapid liquid expansion phase occurred much earlier than that previously identified for lysozyme, trypsin, cytochrome C, and luciferase. This experimental finding was linked to the number of hydrophobic residues in the constituent unit, and the number of hydrophobic residues in glucose oxidase was the highest among these biomolecules. On the other hand, DNA molecules do not have such hydrophobic groups, or present a positive surface on the π-t curve. However, interfacial adsorption occurred, and the existence of molecules at the air/water interface was confirmed, even in the two-dimensional gas phase state. Furthermore, it was confirmed that an increase in surface pressure was detected during the formation of a mixed film of DNA molecules and biomolecules, forming a stable Gibbs monolayer. This mimic the behavior of mixed monolayer formation with matrix molecules in Langmuir monolayers. Moreover, it was clarified that the interfacial adsorption denaturation behavior changed when pH dependence was evaluated considering the isoelectric point of the biomolecular group.

Impact of the bulk aggregation on the adsorption of oppositely charged polyelectrolyte-surfactant mixtures onto solid surfaces

The understanding of the deposition of oppositely charged polyelectrolytes-surfactant mixtures onto solid surfaces presents a high interest in current days due to the recognized impact of the obtained layers on different industrial sectors and the performance of several consumer products (e.g. formulations of shampoos and hair conditioners). This results from the broad range of structures and properties that can present the mixed layers, which in most of the cases mirror the association process occurring between the polyelectrolyte chains and the oppositely charged surfactants in the bulk. Therefore, the understanding of the adsorption processes and characteristics of the adsorbed layers can be only attained from a careful examination of the self-assembly processes occurring in the solution. This review aims to contribute to the understanding of the interaction of polyelectrolyte-surfactant mixtures with solid surfaces, which is probably one of the most underexplored aspects of these type of systems. For this purpose, a comprehensive discussion on the correlations between the aggregates formed in the solutions and the deposition of the obtained complexes upon such association onto solid surfaces will be presented. This makes it necessary to take a closer look to the most important forces driving such processes.

Adsorption layer formation in dispersions of protein aggregates

The review discusses recent results on the adsorption of amyloid fibrils and protein microgels at liquid/fluid interfaces. The application of the shear and dilational surface rheology, atomic force microscopy and passive particle probe tracking allowed for elucidating characteristic features of the protein aggregate adsorption while some proposed hypothesis still must be examined by special methods for structural characterization. Although the distinctions of the shear surface properties of dispersions of protein aggregates from the properties of native protein solutions are higher than the corresponding distinctions of the dilational surface properties, the latter ones give a possibility to obtain new information on the formation of fibril aggregates at the water/air interface. Only the adsorption of BLG microgels and fibrils was studied in some details. The kinetic dependencies of the dynamic surface tension and dilational surface elasticity for aqueous dispersions of protein globules, protein microgels and purified fibrils are similar if the system does not contain flexible macromolecules or flexible protein fragments. In the opposite case the kinetic dependencies of the dynamic surface elasticity can be non-monotonic. The solution pH influences strongly the dynamic surface properties of the dispersions of protein aggregates indicating that the adsorption kinetics is controlled by an electrostatic adsorption barrier if the pH deviates from the isoelectric point. A special section of the review considers the possibility to apply kinetic models of nanoparticle adsorption to the adsorption of protein aggregates.

Network Formation of DNA/Polyelectrolyte Fibrous Aggregates Adsorbed at the Water-Air Interface

It is discovered that complexes of DNA and hydrophobically modified polyelectrolytes form a rigid network of threadlike or fibrous aggregates at the liquid-gas interface whose morphology can dramatically affect the mechanical properties. While mixed solutions of DNA and poly(N,N-diallyl-N,N-dimethylammonium chloride) (PDADMAC) exhibit no notable surface activity, the complexes formed from DNA with poly(N,N-diallyl-N-butyl-N-methylammonium chloride) are surface-active, in contrast to either of the separate components. Further, complexes of DNA and poly(N,N-diallyl-N-hexyl-N-methylammonium chloride) (PDAHMAC) with its longer hydrophobic side chains exhibit pronounced surface activity with values of surface pressures up to 16 mN/m and dynamic surface elasticity up to 58 mN/m. If the PDAHMAC nitrogen to DNA phosphate molar ratio, N/P, is between 0.6 and 3, abrupt compression of the adsorption layer leads unexpectedly to a noticeable decrease of the surface elasticity. The application of imaging techniques reveals that this effect is a consequence of the destruction of a rigid network of threadlike DNA/polyelectrolyte aggregates at the interface. The toroidal aggregates, which are typical for the bulk phase of DNA/PDADMAC solutions in this range of N/P ratios, are not observed in the surface layer. The observed link between the mechanical properties and interfacial morphology of surface-active complexes formed from DNA with hydrophobically modified polyelectrolytes indicates that tuning polyelectrolyte hydrophobicity in these systems may be a means to develop their use in applications ranging from nonviral gene-delivery vehicles to conductive nanowires.

Adsorption of Denaturated Lysozyme at the Air-Water Interface: Structure and Morphology

The application of protein deuteration and high flux neutron reflectometry has allowed a comparison of the adsorption properties of lysozyme at the air-water interface from dilute solutions in the absence and presence of high concentrations of two strong denaturants: urea and guanidine hydrochloride (GuHCl). The surface excess and adsorption layer thickness were resolved and complemented by images of the mesoscopic lateral morphology from Brewster angle microscopy. It was revealed that the thickness of the adsorption layer in the absence of added denaturants is less than the short axial length of the lysozyme molecule, which indicates deformation of the globules at the interface. Two-dimensional elongated aggregates in the surface layer merge over time to form an extensive network at the approach to steady state. Addition of denaturants in the bulk results in an acceleration of adsorption and an increase of the adsorption layer thickness. These results are attributed to incomplete collapse of the globules in the bulk from the effects of the denaturants as a result of interactions between remote amino acid residues. Both effects may be connected to an increase of the effective total volume of macromolecules due to the changes of their tertiary structure, that is, the formation of molten globules under the influence of urea and the partial unfolding of globules under the influence of GuHCl. In the former case, the increase of globule hydrophobicity leads to cooperative aggregation in the surface layer during adsorption. Unlike in the case of solutions without denaturants, the surface aggregates are short and wormlike, their size does not change with time, and they do not merge to form an extensive network at the approach to steady state. To the best of our knowledge, these are the first observations of cooperative aggregation in lysozyme adsorption layers.