Iron Oxide Surface Chemistry: Effect of Chemical Structure on Binding in Benzoic Acid and Catechol Derivatives

User-friendly platform for analysis of high mass intact proteins and glycopeptides by laser desorption/ionization-mass spectrometry based on copper oxide particles

Matrix-assisted laser desorption/ionization-mass spectrometry (MALDI-MS) based on micro/nanostructured materials with different natures has received increasing attention for the analysis of a wide variety of analytes. However, up to now, only a few studies have shown the application of simple platforms in MALDI-MS for the identification of intact proteins. The present work reports on the application of copper oxide particles (Cu2O PS), obtained by a greener route, in combination with low amounts of 2,5-dihydroxybenzoic acid (DHB) as a novel hybrid platform. The combined Cu2O PS@DHB matrix, containing only 2.5 mg mL-1 of particles and 10 mg mL-1 of DHB, was easily applicable in MALDI-MS without surface modification of target plates. Under optimal conditions, the analysis of intact proteins up to 150,000 Da was possible, including immunoglobulin G, bovine serum albumin, and cytochrome C with adequate spot-to-spot signal reproducibility (RSD < 10%). In addition, the analysis of glycopeptides from IgG digests was carried out to prove the multipurpose application of the Cu2O PS@DHB platform in the low m/z range (2500-3000 Da). From the obtained results, it can be concluded that the optical and surface properties of as-synthesized Cu2O PS are likely to be responsible for the superior performance of Cu2O PS@DHB in comparison with conventional matrices. In this sense, the proposed user-friendly methodology opens up the prospect for possible implementation in bioanalysis and diagnostic research.

Preclinical Assessment of Enhanced Chemodynamic Therapy by an FeMnOx-Based Nanocarrier: Tumor-Microenvironment-Mediated Fenton Reaction and ROS-Induced Chemotherapeutic for Boosted Antitumor Activity

In recent studies, iron-containing Fenton nanocatalysts have demonstrated significant promise for clinical use due to their effective antitumor activity and low cytotoxicity. A new approach was reported in this work utilizing cation exchange synthesis to fabricate FeMnOx nanoparticles (NPs) that boost Fenton reactions and responses to the tumor microenvironment (TME) for chemodynamic therapy (CDT) and chemotherapy (CT). Within the TME, the redox metal pair of Fe2+/Mn2+ helps break down endogenous hydrogen peroxide (H2O2) into very harmful hydroxyl radicals (•OH) while simultaneously deactivating glutathione (GSH) to boost CDT performance. To further enhance the therapeutic potential, FeMnOx NPs were encapsulated with thioketal-linked camptothecin (CPT-TK-COOH), a reactive oxygen species (ROS)-responsive prodrug, achieving a high CPT-loading capacity of up to 51.1%. Upon ROS generation through the Fenton reaction, the prodrug TK linkage was disrupted, releasing 80% of the CPT payload within 48 h. Notably, FeMnOx@CPT exhibited excellent dual-modal imaging capabilities, enabling magnetic resonance and fluorescence imaging for image-guided therapy. In vitro studies showed the cytocompatibility of FeMnOx NPs using MDA-Mb-231 and 4T1 cells, but in the presence of H2O2, they induced significant cytotoxicity, resulting in 80% cell death through CDT and CT effects. Upon intravenous administration, FeMnOx@CPT displayed remarkable tumor accumulation, which enhanced tumor suppression in xenografts through improved CDT and CT effects. Moreover, no significant adverse effects were observed in the FeMnOx NP-treated animals. In the current study, the FeMnOx@CPT anticancer platform, with its boosted •OH-producing capability and ROS-cleavable drug release, has been validated utilizing in vitro and animal studies, suggesting its capacity as a viable strategy for clinical trials.

Tunable particle-agglomeration and magnetic coupling in bi-magnetic nanocomposites

A set of non-stoichiometric Zn-Co-ferrite nanoparticles (NPs) was prepared by thermal decomposition of metallic complexes, in the presence of oleic acid, and, after a ligand-exchange process, was coated by a hydrophilic surfactant: these NPs were used as seeds in a sol-gel self-combustion synthesis to prepare nanocomposites (NCs) with a fixed weight ratio. Our focus here is the development of an efficient synthetic approach to control the magnetic coupling between a hard-magnetic matrix (Sr-ferrite) and NPs. The physico-chemical synthetic conditions (temperature, pH, colloidal stability) were optimized in order to tune their effect on the final particles' agglomeration in the matrix. We demonstrate that our synthetic approach is a novel way to produce strongly magnetically coupled NCs, where the final extrinsic properties could be tuned by controlling (i) the agglomeration of seeds in the matrix and (ii) their elemental doping.

Differential Responses of Bacterial and Fungal Communities to Siderophore Supplementation in Soil Affected by Tobacco Bacterial Wilt (Ralstonia solanacearum)

Siderophores secreted by microorganisms can promote ecological efficiency and could be used to regulate the unbalanced microbial community structure. The influence of the siderophore activity of Trichoderma yunnanense strain 2-14F2 and Beauveria pseudobassiana strain (2-8F2) on the physiological/biochemical functions and community structure of soil microbes affected by tobacco bacterial wilt (TBW) was studied. DNS Colorimetry and Biolog-eco plates were used to quantify the impacts of strain siderophores on soil enzyme activities and microbial metabolism. Based on Illumina MiSeq high-throughput sequencing, the soil 16S rDNA and ITS sequences were amplified to dissect the response characteristics of alpha/beta diversity and the structure/composition of a soil microbial community toward siderophores. The KEGG database was used to perform the PICRUSt functional prediction of the microbial community. We found that siderophores of 2-14F2 and 2-8F2, at certain concentrations, significantly increased the activities of sucrase (S-SC) and urease (S-UE) in the TBW soil and enhanced the average well color development (AWCD, carbon source utilization capacity) of the microbial community. The metabolic capacity of the diseased soil to amino acids, carbohydrates, polymers, aromatics, and carboxylic acids also increased significantly. The response of the bacterial community to siderophore active metabolites was more significant in alpha diversity, while the beta diversity of the fungal community responded more positively to siderophores. The relative abundance of Actinobacteria, Chloroflexi, and Acidobacteria increased and was accompanied by reductions in Proteobacteria and Firmicutes. LEfSe analysis showed that Pseudonocardiaceae, Gemmatimonas, Castellaniella, Chloridiumand and Acrophialophora altered the most under different concentrations of siderophore active metabolites. The PICRUSt functional prediction results showed that siderophore increased the abundance of the redox-related enzymes of the microbial community in TBW soil. The BugBase phenotypic prediction results showed that the siderophore activity could decrease the abundance of pathogenic bacteria. The study concludes that siderophore activity could decrease the abundance of pathogenic bacteria and regulate the composition of the microbial community in TBW soil. The activities of sucrase (S-SC) and urease (S-UE) in TBW soil were significantly increased. Overall, the siderophore regulation of community structures is a sustainable management strategy for soil ecosystems.

The Influence of Catechols on the Magnetization of Iron Oxide Nanoparticles

In this study, MNPs were functionalized with pyrocatechol (CAT), pyrogallol (GAL), caffeic acid (CAF), and nitrodopamine (NDA) at pH 8 and pH 11. The functionalization of the MNPs was successful, except in the case of NDA at pH 11. The thermogravimetric analyses indicated that the surface concentration of the catechols was between 1.5 and 3.6 molecules/nm². The saturation magnetizations (M_s) of the functionalized MNPs were higher than the starting material. XPS analyses showed only the presence of Fe(III) ions on the surface, thus refuting the idea of the Fe being reduced and magnetite being formed on the surfaces of the MNPs. Density functional theory (DFT) calculations were performed for two modes of adsorption of CAT onto two model surfaces: plain and adsorption via condensation. The total magnetization of both adsorption modes remained the same, indicating that the adsorption of the catechols does not affect the M_s. The analyses of the size and the size distribution showed an increase in the average size of the MNPs during the functionalization process. This increase in the average size of the MNPs and the reduction in the fraction of the smallest (i.e., <10 nm) MNPs explained the increase in the M_s values.

Cytotoxicity inhibition of catechol's type molecules by grafting on TiO2 and Fe2O3 nanoparticles surface

The potential toxicity deriving from the interaction between chemicals and manufactured nanoparticles (NPs) represents an emerging threat to the environment and human health. Several studies have focused on the risks and (eco)toxicity of manufactured NPs as a consequence of their extensive use in recent years, however, there is still a limited understanding of the combined effects caused by manufactured NPs in the presence of other environmental contaminants. This is particularly relevant to aquatic environments, where many types of pollutants are inevitably released and can be involved in many kinds of reactions. In this context, the interaction between catecholate type ligands and two different nanomaterials, namely TiO₂ and Fe₂O₃ NPs, was investigated by performing cytotoxicity assays with the topminnow fish hepatoma cell line (PLHC-1) using: i) the original organic molecules, ii) pristine NPs alone, and iii) modified NPs obtained by grafting the ligands on the NPs surface. Cytotoxic effects were explored at three different levels, specifically on cellular metabolism, membrane integrity and lysosomal activity. The outcomes from these assays showed cytotoxicity only for the free catechol type ligands, while in general no significant decrease in cell viability was observed for pristine NPs, as well as for the modified NPs, regardless the initial cytotoxicity level of the organic ligands These results suggest that the binding of catechols on the NPs' surface inhibited their cytotoxicity, indicating that TiO₂ and Fe₂O₃ NPs may act as sorbents of these contaminants, thus reducing their possible detrimental effects.

Free-standing two-dimensional sheets of polymer-linked nanoparticles

Here, we report a simple and general approach to fabricate free-standing two-dimensional (2D) sheets of nanoparticles by the simultaneous self-assembly of hydrophobic nanoparticles and hydrophilic polymers at the liquid-liquid interface. The nanoparticle-polymer interaction at the interface generates well-defined 2D sheets of densely packed nanoparticles with a lateral dimension of tens of micrometers. The nanosheets transferred in water are stable over months without any additional cross-linking step. The method is applicable for a broad range of nanoparticles including oxide, semiconductor, and metal nanoparticles as well as functional polymers.

How Can Ozone and Relative Humidity Affect Artists’ Alkyd Paints? A FT-IR and Py-GC/MS Systematic Study

Knowledge of the chemical–physical reactions that determine the main degradation behaviour of artists’ alkyd paints represents one of the main problems within the museum exhibitions. The collection and interpretation of these data on degradation phenomena, especially after ozone exposure at different relative humidity values, can be useful for their conservation needs. Therefore, a systematic investigation of these materials may help achieve this goal. Firstly, surface-level identification of the main functional groups of ad hoc created and aged alkyd paints was performed using attenuated total reflection Fourier-transform infrared spectroscopy (ATR-FTIR). Subsequently, these paints were investigated by pyrolysis–gas chromatography and mass spectrometry (Py–GC/MS), allowing for precise bulk identification of the organic compounds before and after accelerated ageing. A first successful attempt to provide quantitative Py–GC/MS data on alkyd-based paints is here presented and discussed. Comparing the results, it was possible to obtain new insights into the degradation behaviour of alkyd paints when exposed to ozone, allowing us to devise specific preventive and conservation strategies for these artistic materials.

Submicron 3,4-dihydroxybenzoic acid–TiO2 composite particles for enhanced MALDI MS imaging of secondary metabolites in the root of differently aged baical skullcap

This work provides a high-efficient organic-inorganic hybrid matrix for MALDI MSI of secondary metabolites in plant tissues.

Synthesis, characterization and biocompatibility of guar gum-benzoic acid

A novel chemical functionalization of guar gum (GG) by benzoic acid (BA) via nucleophilic substitution reaction in aqueous solution has been reported. BA moieties are chosen due to coordination chemistry of carboxylic acid moieties, hydrophobicity and intermolecular interaction of aromatic rings. The presence of conjugated BA on guar gum-benzoic acid (GG-BA) with grafting density of 5.5% is confirmed by ¹H NMR. Amorphous GG-BA with irregular morphology has been studied by UV-Vis, FTIR, XRD, SEM, TEM, TGA, computational chemistry and contact angle measurement. GG-BA in a concentration range from 0 to 4000 μg mL^-1 has good biocompatibility to mouse embryonic fibroblasts (MEF), human mammary epithelial cells (MCF-10A) after 48 and 72 h of treatment using WST-1 assay. GG-BA shows great potential for the development of biomaterials such as bioadhesives, hydrogels, and coacervates.

Surface-Initiated, Catechol-Containing Polymer Films for Effective Chelation of Aluminum Ions

We present a new route for obtaining surface-tethered polymer films containing pendant catechol functional groups via surface-initiated activators regenerated by electron-transfer atom-transfer radical polymerization (SI-ARGET ATRP) of glycidyl methacrylate (GMA) and post-polymerization modification of the resulting poly(glycidyl methacrylate) (pGMA) films with dopamine. This method enables a high degree of functionalization of pGMA films with catechol groups at a controlled level, depending on the duration of the post-polymerization modification reaction. The dopamine-pGMA films readily absorbs Al³⁺ and Zn²⁺ ions, as verified by quartz crystal microbalance with dissipation (QCM-D) under continuous flow conditions, and demonstrates a four-fold molar selectivity to Al³⁺ over Zn²⁺. The ions desorb from the films upon rinsing with pure deionized (DI) water, which regenerates the catechol sites in the dopamine-pGMA film. Subsequent exposure to metal ions after rinsing steps yields reproducible levels of loading.

18F-Labeled magnetic nanovectors for bimodal cellular imaging

Surface modification of nanocarriers enables selective attachment to specific molecular targets within a complex biological environment. Besides the enhanced uptake due to specific interactions, the surface ligands can be utilized for radiolabeling applications for bimodal imaging ensured by positron emission topography (PET) and magnetic resonance imaging (MRI) functions in one source. Herein, we describe the surface functionalization of magnetite (Fe₃O₄) with folic acid as a target vector. Additionally, the magnetic nanocarriers were conjugated with appropriate ligands for subsequent copper-catalyzed azide-alkyne cycloaddition or carbodiimide coupling reactions to successfully achieve radiolabeling with the PET-emitter ¹⁸F. The phase composition (XRD) and size analysis (TEM) confirmed the formation of Fe₃O₄ nanoparticles (6.82 nm ± 0.52 nm). The quantification of various surface functionalities was performed by Fourier-transform infrared spectroscopy (FT-IR) and ultraviolet-visible microscopy (UV-Vis). An innovative magnetic-HPLC method was developed in this work for the determination of the radiochemical yield of the ¹⁸F-labeled NPs. The as-prepared Fe₃O₄ particles demonstrated high radiochemical yields and showed high cellular uptake in a folate receptor overexpressing MCF-7 cell line, validating bimodal imaging chemical design and a magnetic HPLC system. This novel approach, combining folic acid-capped Fe₃O₄ nanocarriers as a targeting vector with ¹⁸F labeling, is promising to apply this probe for bimodal PET/MR-studies.

Nitric oxide inhibition of lipopolysaccharide-stimulated RAW 247.6 cells by ibuprofen-conjugated iron oxide nanoparticles

Aim: To develop a series of superparamagnetic iron oxide nanoparticles (SPIONs) by coconjugating them with ibuprofen (ibu) and glycerol phosphate (glycerol) or ibu and glucose-1-phosphate and to assess capacity of these conjugates to inhibit the release of nitric oxide (NO) in macrophages, even at low concentrations. Materials & methods: The SPION conjugates were characterized and their properties evaluated showing the influence of those ligands on colloidal stability and inhibition of NO-release demonstrated. The cytotoxicity and possible anti-inflammatory activity were evaluated using murine macrophages (RAW 247.6). Results: SPION-glycerol phosphate/ibu conjugates inhibited the NO production induced by lipopolysaccharides, indicating a potential anti-inflammatory activity. Conclusion: SPION conjugated with ibu was shown to inhibit NO-release even at very low concentrations, suggesting possible action against inflammatory diseases.

A Molecular-Scale Approach to Rare-Earth Beneficiation: Thinking Small to Avoid Large Losses

Separating rare-earth-element-rich minerals from unwanted gangue in mined ores relies on selective binding of collector molecules at the interface to facilitate froth flotation. Salicylhydroxamic acid (SHA) exhibits enhanced selectivity for bastnäsite over calcite in microflotation experiments. Through a multifaceted approach, leveraging density functional theory calculations, and advanced spectroscopic methods, we provide molecular-level mechanistic insight to this selectivity. The hydroxamic acid moiety introduces strong interactions at metal-atom surface sites and hinders subsurface-cation stabilization at vacancy-defect sites, in calcite especially. Resulting from hydrogen-bond-induced interactions, SHA lies flat on the bastnäsite surface and shows a tendency for multilayer formation at high coverages. In this conformation, SHA complexation with bastnäsite metal ions is stabilized, leading to advanced flotation performance. In contrast, SHA lies perpendicular to the calcite surface due to a difference in cationic spacing. We anticipate that these insights will motivate rational design and selection of future collector molecules for enhanced ore beneficiation.

Molecular Recognition at Mineral Interfaces: Implications for the Beneficiation of Rare Earth Ores

Ce-bastnäsite is the single largest mineral source for light rare-earth elements. In view of the growing industrial importance of rare-earth minerals, it is critical to develop more efficient methods for separating the valuable rare-earth-containing minerals from the surrounding gangue. In this work, we employ a combination of periodic density functional theory (DFT) and molecular mechanics (MM) calculations together with the de novo molecular design program HostDesigner to identify bis-phosphinate ligands that preferentially bind to the (100) Ce-bastnäsite surface rather than the (104) calcite surface. DFT calculations for a simple phosphinate ligand were employed to qualitatively understand key behaviors involved in ligand-metal, ligand-solvent, and solvent-metal interactions. These insights were then used to guide the search for flexible, rigid, and semirigid hydrocarbon linkers to identify candidate bis-phosphinate ligands with the potential to bind preferentially to Ce-bastnäsite. Among the five most promising bis-phosphinate ligands suggested by theoretical studies, three ligands were synthesized and their adsorption characteristics to bastnäsite (100) interfaces were characterized using vibrational sum-frequency (vSFG) spectroscopy, attenuated total reflectance Fourier transform infrared (ATR-FTIR) spectroscopy, and isothermal titration calorimetry (ITC). The efficacy of the selective interfacial molecular binding was demonstrated by identifying a bis-phosphinate ligand capable of providing an overall higher surface coverage of alkyl groups relative to a monophosphinate ligand. The results highlight the interplay between adsorption binding strength and maximum surface coverage in determining ligand efficiency to render the mineral surface hydrophobic. DFT calculations further indicate that all tested ligands have higher affinity for Ce-bastnäsite than for calcite. This is consistent with the ITC data showing stronger adsorption enthalpy to bastnäsite than to calcite, making these ligands promising candidates for selective flotation of Ce-bastnäsite.

Bifunctional Au-Fe3O4 Nanoheterodimers Acting as X-ray Protector in Healthy Cells and as X-ray Enhancer in Tumor Cells

Bifunctional Au-Fe₃O₄ nanoheterodimers were synthesized by thermally decomposing Fe(III)oleate on gold nanoparticles followed by functionalizing with tiron, 2,3-dihydroxybenzoic acid, or caffeic acid. These catechol derivatives are antioxidative and thus are predicted to function as superoxide scavengers. In particular, caffeic acid lost its antioxidant capacity, although it was covalently linked through its carboxyl moiety to the Fe₃O₄ surface. Tiron was shown to bind via its catechol group to the Au-Fe₃O₄ nanoheterodimers, and 2,3-dihydroxybenzoic was just physisorbed between the oleic acid surface structures. Caffeic-acid stabilized Au-Fe₃O₄ nanoheterodimers turned out to act as X-ray protector in healthy cells but as X-ray enhancing agents in cancer cells. Furthermore, these functionalized Au-Fe₃O₄ nanoheterodimers were found to inhibit the migratory capacity of the cancer cells.

Deliberate Modification of Fe3O4 Anode Surface Chemistry: Impact on Electrochemistry

Fe₃O₄ nanoparticles (NPs) with an average size of 8-10 nm have been successfully functionalized with various surface-treatment agents to serve as model systems for probing surface chemistry-dependent electrochemistry of the resulting electrodes. The surface-treatment agents used for the functionalization of Fe₃O₄ anode materials were systematically varied to include aromatic or aliphatic structures: 4-mercaptobenzoic acid, benzoic acid (BA), 3-mercaptopropionic acid, and propionic acid (PA). Both structural and electrochemical characterizations have been used to systematically correlate the electrode functionality with the corresponding surface chemistry. Surface treatment with ligands led to better Fe₃O₄ dispersion, especially with the aromatic ligands. Electrochemistry was impacted where the PA- and BA-treated Fe₃O₄ systems without the -SH group demonstrated a higher rate capability than their thiol-containing counterparts and the pristine Fe₃O₄. Specifically, the PA system delivered the highest capacity and cycling stability among all samples tested. Notably, the aromatic BA system outperformed the aliphatic PA counterpart during extended cycling under high current density, due to the improved charge transfer and ion transport kinetics as well as better dispersion of Fe₃O₄ NPs, induced by the conjugated system. Our surface engineering of the Fe₃O₄ electrode presented herein, highlights the importance of modifying the structure and chemistry of surface-treatment agents as a plausible means of enhancing the interfacial charge transfer within metal oxide composite electrodes without hampering the resulting tap density of the resulting electrode.

Mechanism of Goethite Precipitation on Magnetite and Maghemite Nanoparticles Studied by Surface Complexation/Precipitation Modeling

Precipitation of goethite on magnetic nanoparticles (MNPs) has been proposed as an effective means to separate goethite from calcium sulfate in the iron removal process of zinc hydrometallurgy, which allows reuse of the hazardous residues. This study focuses on investigating the underlying mechanisms of goethite precipitation on magnetite and maghemite MNPs, providing insights on Fe(III)_aq adsorption and nucleation of goethite on MNPs. A predictive surface complexation/precipitation model of the system was developed based on the results from two different types of experiments: the potentiometric titration of MNPs to calculate proton binding constants ( K_a) of discrete MNP surface functional groups and the corresponding site concentrations; and adsorption of Fe(III)_aq onto MNP surfaces to determine metal binding constants ( K_f). The composition of the surface complexes on MNPs was determined by time-of-flight secondary ion mass spectrometry. The results indicated the formation of polynuclear surface complexes. The content of polynuclear surface complexes was found to be significantly higher on maghemite MNPs than on magnetite MNPs. This trend is consistent with our experimental results of a greater goethite precipitation on maghemite than on magnetite. Overall, the formation of Fe(III) polynuclear surface complexes correlates directly to the nucleation and precipitation of goethite on the surfaces of both types of MNPs.

Advances in Magnetic Nanoparticles for Biomedical Applications

Magnetic nanoparticles (NPs) are emerging as an important class of biomedical functional nanomaterials in areas such as hyperthermia, drug release, tissue engineering, theranostic, and lab-on-a-chip, due to their exclusive chemical and physical properties. Although some works can be found reviewing the main application of magnetic NPs in the area of biomedical engineering, recent and intense progress on magnetic nanoparticle research, from synthesis to surface functionalization strategies, demands for a work that includes, summarizes, and debates current directions and ongoing advancements in this research field. Thus, the present work addresses the structure, synthesis, properties, and the incorporation of magnetic NPs in nanocomposites, highlighting the most relevant effects of the synthesis on the magnetic and structural properties of the magnetic NPs and how these effects limit their utilization in the biomedical area. Furthermore, this review next focuses on the application of magnetic NPs on the biomedical field. Finally, a discussion of the main challenges and an outlook of the future developments in the use of magnetic NPs for advanced biomedical applications are critically provided.

Synthesis, Characterization, and Applications of Magnetic Nanoparticles Featuring Polyzwitterionic Coatings

Throughout the last decades, magnetic nanoparticles (MNP) have gained tremendous interest in different fields of applications like biomedicine (e.g., magnetic resonance imaging (MRI), drug delivery, hyperthermia), but also more technical applications (e.g., catalysis, waste water treatment) have been pursued. Different surfactants and polymers are extensively used for surface coating of MNP to passivate the surface and avoid or decrease agglomeration, decrease or modulate biomolecule absorption, and in most cases increase dispersion stability. For this purpose, electrostatic or steric repulsion can be exploited and, in that regard, surface charge is the most important (hybrid) particle property. Therefore, polyelectrolytes are of great interest for nanoparticle coating, as they are able to stabilize the particles in dispersion by electrostatic repulsion due to their high charge densities. In this review article, we focus on polyzwitterions as a subclass of polyelectrolytes and their use as coating materials for MNP. In the context of biomedical applications, polyzwitterions are widely used as they exhibit antifouling properties and thus can lead to minimized protein adsorption and also long circulation times.

Exceptionally strong, stiff and hard hybrid material based on an elastomer and isotropically shaped ceramic nanoparticles

In this work the fabrication of hard, stiff and strong nanocomposites based on polybutadiene and iron oxide nanoparticles is presented. The nanocomposites are fabricated via a general concept for mechanically superior nanocomposites not based on the brick and mortar structure, thus on globular nanoparticles with nanosized organic shells. For the fabrication of the composites oleic acid functionalized iron oxide nanoparticles are decorated via ligand exchange with an α,ω-polybutadiene dicarboxylic acid. The functionalized particles were processed at 145 °C. Since polybutadiene contains double bonds the nanocomposites obtained a crosslinked structure which was enhanced by the presence of oxygen or sulfur. It was found that the crosslinking and filler percolation yields high elastic moduli of approximately 12–20 GPa and hardness of 15–18 GPa, although the polymer volume fraction is up to 40%. We attribute our results to a catalytically enhanced crosslinking reaction of the polymer chains induced by oxygen or sulfur and to the microstructure of the nanocomposite.