Conjugation in Escherichia coli Biofilms on Poly(dimethylsiloxane) Surfaces with Microtopographic Patterns

Antibacterial photodynamic properties of silver nanoparticles-loaded curcumin composite material in chitosan-based films

In order to cope with the increasingly severe food contamination and safety problems, a powerful sterilization of food packaging material is urgently needed. Chitosan (CS) has potential applications in food packaging due to its good film-forming properties, but its antibacterial activity is not sufficient to meet the needs in practical applications. Silver nanoparticles (AgNPs) have the problem of weak immediate antibacterial activity as a broad-spectrum antibacterial agent. Therefore, in this study, AgNPs@GA@Cur-POTS (AGCP) composite antibacterial system was prepared by combining AgNPs with antibacterial photodynamic therapy using gallic acid (GA) as a reducing agent, curcumin (Cur) as a photosensitizer and perfluorosilane (POTS) for surface modification. The results showed that AGCP could produce a large number of reactive oxygen species under blue light irradiation, killing >90 % of E. coli and S. aureus within 2 h. Subsequently, the composite film of CS loaded with AGCP (CS/AGCP) was prepared by the flow-delay method. The CS/AGCP composite film exhibited excellent barrier properties and antioxidant activity, while its antibacterial rates against E. coli and S. aureus reached 98.44 ± 1.27 % and 99.11 ± 0.24 %, respectively, while the OD630 values of the two groups of bacteria treated with it showed no significant increase in incubation for up to 132 h, exhibiting remarkable and sustained antibacterial effects. Taken together, this work will provide a new strategy for antibacterial food packaging.

Interaction between microorganisms and dental material surfaces: general concepts and research progress

Bacterial adhesion to dental materials’ surfaces is the initial cause of dental materials-related infections. Therefore, inhibiting bacterial adhesion is a critical step in preventing and controlling these infections. To this end, it is important to know how the properties of dental materials affect the interactions between microorganisms and material surfaces to produce materials without biological contamination. This manuscript reviews the mechanism of bacterial adhesion to dental materials, the relationships between their surface properties and bacterial adhesion, and the impact of bacterial adhesion on their surface properties. In addition, this paper summarizes how these surface properties impact oral biofilm formation and proposes designing intelligent dental material surfaces that can reduce biological contamination.

Reversible Adsorption and Detachment of Saccharomyces cerevisiae on Thermoresponsive Poly(N-isopropylacrylamide)-Grafted Fibers for Continuous Immobilized Fermentation

Biofilm-mediated continuous fermentation with cells immobilized has gained much attention in recent years. In this study, thermoresponsive poly(N-isopropylacrylamide)-grafted cotton fibers (PNIPAM-CF) were prepared via an improved surface-initiated atom transfer radical polymerization. The modification process imparted switchable wettability to the surface while maintaining the thermal stability and biocompatibility of the CF. During the ethanol transformation, the rapid, reversible cell adsorption and detachment of Saccharomyces cerevisiae were performed through the modulation of wettability, displaying the enhancement of immobilized biomass and immobilization efficiency from 2.20 g/L and 59.43% to 2.81 g/L and 93.32%, respectively. Moreover, the biofilm adsorption matched well with the Freundlich model, indicating that multilayer adhesion was the main mode of biofilm formation. Based on the accumulation of the biofilm, the fabrication and utilization of PNIPAM-CF improved the efficiency of continuous immobilized fermentation, making the ethanol production reach 26.34 g/L in the sixth batch of fermentation. Meanwhile, wettability regulation further enhanced the reusability of the carrier. Therefore, the findings of this study revealed that the application of smart materials in cell immobilization systems had broad prospects for achieving sustainable and continuous catalysis.

Accelerated spread of antibiotic resistance genes (ARGs) induced by non-antibiotic conditions: Roles and mechanisms

The global spread of antibiotic resistance genes (ARGs) has wreaked havoc with the treatment efficiency of antibiotics and, ultimately, anti-microbial chemotherapy, and has been conventionally attributed to the abuse and misuse of antibiotics. However, the ancient ARGs have alterative functions in bacterial physiology and thus they could be co-regulated by non-antibiotic conditions. Recent research has demonstrated that many non-antibiotic chemicals such as microplastics, metallic nanoparticles and non-antibiotic drugs, as well as some non-antibiotic conditions, can accelerate the dissemination of ARGs. These results suggested that the role of antibiotics might have been previously overestimated whereas the effects of non-antibiotic conditions were possibly ignored. Thus, in an attempt to fully understand the fate and behavior of ARGs in the eco-system, it is urgent to critically highlight the role and mechanisms of non-antibiotic chemicals and related environmental factors in the spread of ARGs. To this end, this timely review assessed the evolution of ARGs, especially its function alteration, summarized the non-antibiotic chemicals promoting the spread of ARGs, evaluated the non-antibiotic conditions related to ARG dissemination and analyzed the molecular mechanisms related to spread of ARGs induced by the non-antibiotic factors. Finally, this review then provided several critical perspectives for future research.

Droplet size and surface hydrophobicity enhance bacterial plasmid transfer rates in microscopic surface wetness

Conjugal plasmids constitute a major engine for horizontal gene transfer in bacteria, and are key drivers of the spread of antibiotic resistance, virulence, and metabolic functions. Bacteria in terrestrial habitats often inhabit surfaces that are not constantly water-saturated, where microscopic surface wetness (MSW), comprised of thin liquid films and microdroplets, permanently or intermittently occurs. How physical properties of microdroplets, and of the surfaces they reside on, affect plasmid transfer rates is not well understood. Here, building on microscopy-based microdroplet experiments, we examined the relation between droplet properties (size and spread) and plasmid transfer rates at single-cell and individual droplet resolution, using Pseudomonas putida as a model species. We show that transfer rates increase with droplet size, due to higher densities of cells on the surface in larger droplets, resulting from lower ratio between the area of the liquid-solid interface and droplet volumes. We further show that surface hydrophobicity promotes transfer rates via the same mechanism. Our results provide new insights into how physical properties of surfaces and MSW affect plasmid transfer rates, and more generally, microbial interactions mediated by cell-to-cell contact, with important implications for our understanding of the ecology and evolution of bacteria in unsaturated environments.

Manipulating Bacterial Biofilms Using Materiobiology and Synthetic Biology Approaches

Bacteria form biofilms on material surfaces within hours. Biofilms are often considered problematic substances in the fields such as biomedical devices and the food industry; however, they are beneficial in other fields such as fermentation, water remediation, and civil engineering. Biofilm properties depend on their genome and the extracellular environment, including pH, shear stress, and matrices topography, stiffness, wettability, and charges during biofilm formation. These surface properties have feedback effects on biofilm formation at different stages. Due to emerging technology such as synthetic biology and genome editing, many studies have focused on functionalizing biofilm for specific applications. Nevertheless, few studies combine these two approaches to produce or modify biofilms. This review summarizes up-to-date materials science and synthetic biology approaches to controlling biofilms. The review proposed a potential research direction in the future that can gain better control of bacteria and biofilms.

Surface Design for Antibacterial Materials: From Fundamentals to Advanced Strategies

Healthcare-acquired infections as well as increasing antimicrobial resistance have become an urgent global challenge, thus smart alternative solutions are needed to tackle bacterial infections. Antibacterial materials in biomedical applications and hospital hygiene have attracted great interest, in particular, the emergence of surface design strategies offer an effective alternative to antibiotics, thereby preventing the possible development of bacterial resistance. In this review, recent progress on advanced surface modifications to prevent bacterial infections are addressed comprehensively, starting with the key factors against bacterial adhesion, followed by varying strategies that can inhibit biofilm formation effectively. Furthermore, "super antibacterial systems" through pre-treatment defense and targeted bactericidal system, are proposed with increasing evidence of clinical potential. Finally, the advantages and future challenges of surface strategies to resist healthcare-associated infections are discussed, with promising prospects of developing novel antimicrobial materials.

Conjugative Plasmid-Mediated Extended Spectrum Cephalosporin Resistance in Genetically Diverse Escherichia coli from a Chicken Slaughterhouse

ESC-resistant E. coli isolates were collected from broiler chickens, a slaughterhouse, and retail meat to assess their dispersion and their involvement in cross-contamination. ESBL-/AmpC-producing E. coli were isolated during the slaughter process of all six investigated chicken flocks from scalding, feather removal, first conveyor, evisceration, second washing, third conveyor, and third washing areas, and from handling workers in the slaughterhouse. ESC-resistant E. coli isolates with the same pulsed-field gel electrophoresis type were found in the same site (scalding) on different sampling days. ESBL/AmpC-producing E. coli isolates were absent in the lairage area in the slaughterhouse, but present in the retail markets in 36.8% (7/19) of the chicken flocks. The bla_CTX-M genes and bla_CMY-2 were conjugated to recipient E. coli J53 in 67.5% (27/40) and 56.1% (23/41) of ESBL-producing and AmpC-producing E. coli isolates, respectively. The presence of the same conjugative plasmids was found in genetic diversity ESC-resistant E. coli colonies collected on different sampling days. Our study emphasizes that cross-contamination of ESBL/AmpC-producing E. coli in slaughterhouse has a crucial impact on the occurrence of ESC resistance in retail chicken meat.

How microbes read the map: Effects of implant topography on bacterial adhesion and biofilm formation

Microbes have remarkable capabilities to attach to the surface of implanted medical devices and form biofilms that adversely impact device function and increase the risk of multidrug-resistant infections. The physicochemical properties of biomaterials have long been known to play an important role in biofilm formation. More recently, a series of discoveries in the natural world have stimulated great interest in the use of 3D surface topography to engineer antifouling materials that resist bacterial colonization. There is also increasing evidence that some medical device surface topographies, such as those designed for tissue integration, may unintentionally promote microbial attachment. Despite a number of reviews on surface topography and biofilm control, there is a missing link between how bacteria sense and respond to 3D surface topographies and the rational design of antifouling materials. Motivated by this gap, we present a review of how bacteria interact with surface topographies, and what can be learned from current laboratory studies of microbial adhesion and biofilm formation on specific topographic features and medical devices. We also address specific biocompatibility considerations and discuss how to improve the assessment of the anti-biofilm performance of topographic surfaces. We conclude that 3D surface topography, whether intended or unintended, is an important consideration in the rational design of safe medical devices. Future research on next-generation smart antifouling materials could benefit from a greater focus on translation to real-world applications.

The central role of the SOS DNA repair system in antibiotics resistance: A new target for a new infectious treatment strategy

Bacteria have a considerable ability and potential to acquire resistance against antimicrobial agents by acting diverse mechanisms such as target modification or overexpression, multidrug transporter systems, and acquisition of drug hydrolyzing enzymes. Studying the mechanisms of bacterial cell physiology is mandatory for the development of novel strategies to control the antimicrobial resistance phenomenon, as well as for the control of infections in clinics. The SOS response is a cellular DNA repair mechanism that has an essential role in the bacterial biologic process involved in resistance to antibiotics. The activation of the SOS network increases the resistance and tolerance of bacteria to stress and, as a consequence, to antimicrobial agents. Therefore, SOS can be an applicable target for the discovery of new antimicrobial drugs. In the present review, we focus on the central role of SOS response in bacterial resistance mechanisms and its potential as a new target for control of resistant pathogens.

Leaf Surface Topography Contributes to the Ability of Escherichia coli on Leafy Greens to Resist Removal by Washing, Escape Disinfection With Chlorine, and Disperse Through Splash

The attachment of foodborne pathogens to leaf surfaces is a complex process that involves multiple physical, chemical, and biological factors. Here, we report the results from a study designed to specifically determine the contribution of spinach leaf surface topography as it relates to leaf axis (abaxial and adaxial) and leaf age (15, 45, and 75 days old) to the ability of Escherichia coli to resist removal by surface wash, to avoid inactivation by chlorine, and to disperse through splash impact. We used fresh spinach leaves, as well as so-called "replicasts" of spinach leaf surfaces in the elastomer polydimethylsiloxane to show that leaf vein density correlated positively with the failure to recover E. coli from surfaces, not only using a simple water wash and rinse, but also a more stringent wash protocol involving a detergent. Such failure was more pronounced when E. coli was surface-incubated at 24°C compared to 4°C, and in the presence, rather than absence, of nutrients. Leaf venation also contributed to the ability of E. coli to survive a 50 ppm available chlorine wash and to laterally disperse by splash impact. Our findings suggest that the topographical properties of the leafy green surface, which vary by leaf age and axis, may need to be taken into consideration when developing prevention or intervention strategies to enhance the microbial safety of leafy greens.

Vapor-Deposited Biointerfaces and Bacteria: An Evolving Conversation

At the biointerface where materials and microorganisms meet, the organic and synthetic worlds merge into a new science that directs the design and safe use of synthetic materials for biological applications. Vapor deposition techniques provide an effective way to control the material properties of these biointerfaces with molecular-level precision that is important for biomaterials to interface with bacteria. In recent years, biointerface research that focuses on bacteria-surface interactions has been primarily driven by the goals of killing bacteria (antimicrobial) and fouling prevention (antifouling). Nevertheless, vapor deposition techniques have the potential to create biointerfaces with features that can manipulate and dictate the behavior of bacteria rather than killing or deterring them. In this review, we focus on recent advances in antimicrobial and antifouling biointerfaces produced through vapor deposition and provide an outlook on opportunities to capitalize on the features of these techniques to find unexplored connections between surface features and microbial behavior.

Antibiotic Susceptibility of Escherichia coli Cells during Early-Stage Biofilm Formation

Bacteria form complex multicellular structures on solid surfaces known as biofilms, which allow them to survive in harsh environments. A hallmark characteristic of mature biofilms is the high-level antibiotic tolerance (up to 1,000 times) compared with that of planktonic cells. Here, we report our new findings that biofilm cells are not always more tolerant to antibiotics than planktonic cells in the same culture. Specifically, Escherichia coli RP437 exhibited a dynamic change in antibiotic susceptibility during its early-stage biofilm formation. This phenomenon was not strain specific. Upon initial attachment, surface-associated cells became more sensitive to antibiotics than planktonic cells. By controlling the cell adhesion and cluster size using patterned E. coli biofilms, cells involved in the interaction between cell clusters during microcolony formation were found to be more susceptible to ampicillin than cells within clusters, suggesting a role of cell-cell interactions in biofilm-associated antibiotic tolerance. After this stage, biofilm cells became less susceptible to ampicillin and ofloxacin than planktonic cells. However, when the cells were detached by sonication, both antibiotics were more effective in killing the detached biofilm cells than the planktonic cells. Collectively, these results indicate that biofilm formation involves active cellular activities in adaption to the attached life form and interactions between cell clusters to build the complex structure of a biofilm, which can render these cells more susceptible to antibiotics. These findings shed new light on bacterial antibiotic susceptibility during biofilm formation and can guide the design of better antifouling surfaces, e.g., those with micron-scale topographic structures to interrupt cell-cell interactions.IMPORTANCE Mature biofilms are known for their high-level tolerance to antibiotics; however, antibiotic susceptibility of sessile cells during early-stage biofilm formation is not well understood. In this study, we aim to fill this knowledge gap by following bacterial antibiotic susceptibility during early-stage biofilm formation. We found that the attached cells have a dynamic change in antibiotic susceptibility, and during certain phases, they can be more sensitive to antibiotics than planktonic counterparts in the same culture. Using surface chemistry-controlled patterned biofilm formation, cell-surface and cell-cell interactions were found to affect the antibiotic susceptibility of attached cells. Collectively, these findings provide new insights into biofilm physiology and reveal how adaptation to the attached life form may influence antibiotic susceptibility of bacterial cells.

Sensitizing bacterial cells to antibiotics by shape recovery triggered biofilm dispersion

Microbial biofilms are a leading cause of chronic infections in humans and persistent biofouling in industries due to extremely high-level tolerance of biofilm cells to antimicrobial agents. Eradicating mature biofilms is especially challenging because of the protection of the extracellular matrix and slow growth of biofilm cells. Recently, we reported that established biofilms can be effectively removed (e.g. 99.9% dispersion of 48 h Pseudomonas aeruginosa PAO1 biofilms) by shape memory polymer-based dynamic changes in surface topography. Here, we demonstrate that such biofilm dispersion also sensitizes biofilm cells to conventional antibiotics. For example, shape recovery in the presence of 50 µg/mL tobramycin reduced biofilm cell counts by more than 3 logs (2,479-fold) compared to the static flat control. The observed effects were attributed to the disruption of biofilm structure and increase in cellular activities as evidenced by an 11.8-fold increase in intracellular level of adenosine triphosphate (ATP), and 4.1-fold increase in expression of the rrnB gene in detached cells. These results can help guide the design of new control methods to better combat biofilm associated antibiotic-resistant infections. STATEMENT OF SIGNIFICANCE: Microbial infections are challenging due to high-level antibiotic resistance of biofilm cells. The protection of an extracellular matrix and slow growth of biofilm cells render conventional antibiotics ineffective. Thus, it is important to develop new technologies that can remove mature biofilms and sensitize biofilm cells to antibiotics. Recently, we demonstrated that dynamic change in surface topography can remove 48 h Pseudomonas aeruginosa PAO1 biofilms by 99.9%. In this study, we investigated how shape recovery triggered dispersion affect the physiology of biofilm cells and associated antibiotic susceptibility. These results are helpful for understanding biofilm dispersion and developing more effective control methods.

In vitro evaluation of barrier function against oral bacteria of dense and expanded polytetrafluoroethylene (PTFE) membranes for guided bone regeneration

AIM

This study evaluates biofilm formation and barrier function against Streptococcus oralis of nonresorbable polytetrafluoroethylene (PTFE) guided bone regeneration membranes having expanded (e-PTFE) and dense (d-PTFE) microstructure.

MATERIALS AND METHODS

Three e-PTFE membranes of varying openness, one d-PTFE membrane, and commercially pure titanium discs were evaluated. All e-PTFE membranes consisted of PTFE nodes interconnected by fibrils. The d-PTFE membrane was fibril-free, with large evenly spaced indentations. The surfaces were challenged with S. oralis and incubated statically for 2-48h. Bacterial colonization, viability, and penetration were evaluated.

RESULTS

S. oralis numbers increased over time on all surfaces, as observed using scanning electron microscopy, while cell viability decreased, as measured by colony forming unit (CFU) counting. At 24h and 48h, biofilms on d-PTFE were more mature and thicker (tower formations) than on e-PTFE, where fewer layers of cells were distributed mainly horizontally. Biofilms accumulated preferentially within d-PTFE membrane indentations. At 48h, greater biofilm biomass and number of viable S. oralis were found on d-PTFE compared to e-PTFE membranes. All membranes were impermeable to S. oralis cells.

CONCLUSIONS

All PTFE membranes were effective barriers against bacterial passage in vitro. However, d-PTFE favored S. oralis biofilm formation.

Polymertropism of rod-shaped bacteria: movement along aligned polysaccharide fibers

In nature, bacteria often live in surface-associated communities known as biofilms. Biofilm-forming bacteria typically deposit a layer of polysaccharide on the surfaces they inhabit; hence, polysaccharide is their immediate environment on many surfaces. In this study, we examined how the physical characteristics of polysaccharide substrates influence the behavior of the biofilm-forming bacterium Myxococcus xanthus. M. xanthus responds to the compression-induced deformation of polysaccharide substrates by preferentially spreading across the surface perpendicular to the axis of compression. Our results suggest that M. xanthus is not responding to the water that accumulates on the surface of the polysaccharide substrate after compression or to compression-induced changes in surface topography such as the formation of troughs. These directed surface movements do, however, consistently match the orientation of the long axes of aligned and tightly packed polysaccharide fibers in compressed substrates, as indicated by behavioral, birefringence and small angle X-ray scattering analyses. Therefore, we suggest that the directed movements are a response to the physical arrangement of the polymers in the substrate and refer to the directed movements as polymertropism. This behavior might be a common property of bacteria, as many biofilm-forming bacteria that are rod-shaped and motile on soft surfaces exhibit polymertropism.