Landing Dynamics of Swimming Bacteria on a Polymeric Surface: Effect of Surface Properties

Adaptive Escape of Pseudomonas aeruginosa by Application of Low-Amplitude Electric Pulses

Marine antibiofouling using low-amplitude electric pulses (EP) is an energy-efficient and eco-friendly approach, but potential mechanisms for preventing biofouling remain unclear. In the present study, the 3D adhesion dynamics of a model microorganism─Pseudomonas aeruginosa (PAO1)─under low-amplitude cathodic EP were examined as a function of applying voltage and its duration (td). The results demonstrated that adhered bacteria escaped from the electrode surface even when EP was removed. The escaped bacteria ratio, induction period of escape, and duration of the detachment were influenced profoundly by EP amplitude but slightly by td when td ≥ 5 min. The acceleration of escaped PAO1 from the surface indicated that their flagellar motor was powered by EP. Particularly, EP enabled swimming bacteria to have adaptive motions that were sustainable and regulated by the gene rsmA. As a result, they had less accumulation near the surface. The propulsion of adhered bacteria and adaptive escape of swimming bacteria were enhanced in response to low-amplitude EP. Hence, low-amplitude and short-duration EP is promising for sustainable antibiofouling applications.

Digital in-line holographic microscopy for label-free identification and tracking of biological cells

Digital in-line holographic microscopy (DIHM) is a non-invasive, real-time, label-free technique that captures three-dimensional (3D) positional, orientational, and morphological information from digital holographic images of living biological cells. Unlike conventional microscopies, the DIHM technique enables precise measurements of dynamic behaviors exhibited by living cells within a 3D volume. This review outlines the fundamental principles and comprehensive digital image processing procedures employed in DIHM-based cell tracking methods. In addition, recent applications of DIHM technique for label-free identification and digital tracking of various motile biological cells, including human blood cells, spermatozoa, diseased cells, and unicellular microorganisms, are thoroughly examined. Leveraging artificial intelligence has significantly enhanced both the speed and accuracy of digital image processing for cell tracking and identification. The quantitative data on cell morphology and dynamics captured by DIHM can effectively elucidate the underlying mechanisms governing various microbial behaviors and contribute to the accumulation of diagnostic databases and the development of clinical treatments.

Nanotextured titanium inhibits bacterial activity and supports cell growth on 2D and 3D substrate: A co-culture study

Medical implant-associated infections pose a significant challenge to modern medicine, with aseptic loosening and bacterial infiltration being the primary causes of implant failure. While nanostructured surfaces have demonstrated promising antibacterial properties, the translation of their efficacy from 2D to 3D substrates remains a challenge. Here, we used scalable alkaline etching to fabricate nanospike and nanonetwork topologies on 2D and laser powder-bed fusion printed 3D titanium. The fabricated surfaces were compared with regard to their antibacterial properties against Staphylococcus aureus, Escherichia coli, and Pseudomonas aeruginosa, and mesenchymal stromal cell responses with and without the presence of bacteria. Finite elemental analysis assessed the mechanical properties and permeability of the 3D substrate. Our findings suggest that 3D nanostructured surfaces have potential to both prevent implant infections and allow host cell integration. This work represents a significant step towards developing effective and scalable fabrication methods on 3D substrates with consistent and reproducible antibacterial activity, with important implications for the future of medical implant technology.

3D monitoring of the microphase separations inside the intraocular lens

Glistenings often occur after implanting the intraocular lens (IOL) due to the formation of numerous microvacuoles (MVs) and may lead to deterioration of vision quality. Previous studies showed the formation of MVs was associated with the hydrophobicity of IOL materials. Yet, the mechanism remains an open question due to the complexity of IOL polymer networks. In this study, two commercialized IOLs with similar hydrophobicity are found distinct in the formation of MVs. The 3D growth kinetics of MVs during cooling processes are captured for the first time by digital holographic microscopy (DHM) and the components of MVs are measured by DHM and Raman spectroscopy. The results reveal that the growth of MVs stems from the microphase separation of water and surrounding IOL polymers. A polymer swelling model is thus proposed to describe the microphase separation process which is found dependent on the elasticity of IOL polymer networks. The total volume of MVs is determined by the IOL hydrophobicity, while the elastic force of IOL polymer networks determines the number density and size of MVs. This study demonstrates an approach for characterizing the phase separation of crosslinked polymeric materials in biosystems and sheds lights on the refinement of IOL materials. STATEMENT OF SIGNIFICANCE: Glistenings due to the formation of numerous microvacuoles (MVs) in intraocular lens (IOL) can occur after IOL implantation, which may induce poor quality of vision. However, the underlying mechanism of MVs formation is still an open question. This study establishes an in-situ 3D imaging platform to monitor growth kinetics of the MVs in IOLs, which allows to uncover the mechanism of glistenings formation resulting from the microphase separation. The findings imply the material hydrophobicity influences the total volume of MVs, while the local elasticity of IOL polymer networks determines the number density and the size of MVs. This study offers a new approach for characterizing phase separation in crosslinking biosystems and sheds lights on the refinement of IOL materials.

Mechanism Insights of Antibacterial Surfaces Coated with Dead Probiotics

To understand the antimicrobial effect of surfaces fabricated with dead probiotics, we prepared surfaces decorated with dead probiotics Lactobacillus rhamnosus GG (LGG) with varied inactivation methods and explored their inhibitory interactions with Pseudomonas aeruginosa (PAO1). By combining several techniques, i.e., digital holographic microscopy (DHM), atomic force microscopy (AFM), RNA sequencing, and metabolomic analysis, we studied the three-dimensional (3D) swimming behaviors, surface adhesion, biofilm formation, and adaptive responses of PAO1 near such surfaces. The results show that planktonic PAO1 decreases their flick and reverse motions by downregulating the chemotaxis pathway and accelerates with less accumulation near dead LGG surfaces by upregulating the flagellar assembly pathway and decreasing cyclic adenosine monophosphate. Distinct from live siblings, the surfaces decorated with dead LGG show a significant reduction in adhesion strength with PAO1 and inhibit biofilm formation with more downregulated genes in the Pseudomonas quinolone signal and biofilm formation pathway. We demonstrate that the antibacterial ability of such surfaces stems from the gradually released lysate from the dead LGG that is unfavorable to PAO1 in close proximity. The releasing rate and order depend on the cell membrane integrity, which closely relates to the inactivation methods.

Role of Surface Coverage of Sessile Probiotics in Their Interplay with Pathogen Bacteria Investigated by Digital Holographic Microscopy

The adhesion of probiotics plays an important role in the gastrointestinal tract. Understanding the effect of the coverage of colonized probiotics on enteric pathogens is critical for the design of effective probiotic therapies. In the present work, we have investigated the adaptive behaviors of the intestinal pathogenic bacteria Enterobacter sakazakii (ES) near the surfaces coated with a probiotic─Lactobacillus rhamnosus GG (LGG) as a function of surface coverage ratio (CRLGG) by using a home-setup digital holographic microscopy. It shows that ES cells can adaptively sense LGG within a distance of 4.2 μm, even at CRLGG values as low as 0.05%. The growth inhibition of ES cells slightly varies with CRLGG, but the near-surface acceleration and accumulation of ES cells have much dependence on CRLGG. As CRLGG increases from 0.05 to 24.6%, the percentage of actively swimming ES, the motion bias, the acceleration, and the interplay duration do not linearly vary with CRLGG. Instead, each of them shows an extreme at CRLGG of 13.4%, corresponding to the chemotaxis behaviors of ES cells induced by diffusing stimuli (organic acids, bacteriocins, etc.) released from LGG, which showed an extreme concentration gradient at CRLGG = 13.4% by simulations. Our study clearly demonstrates that surface coverage of sessile probiotics profoundly influences their interplay with pathogen bacteria, which should be taken into account in designing probiotic therapies.

Comparison of three-dimensional motion of bacteria with and without wall accumulation

A comparison of the movement characteristics between bacteria with and without wall accumulation could potentially elucidate the mechanisms of biofilm formation. However, authors of previous studies have mostly focused on the motion of bacteria that exhibit wall accumulation. Here, we applied digital holographic microscopy to compare the three-dimensional (3D) motions of two bacterial strains (Shewanella japonica UMDC19 and Shewanella sp. UMDC1): one exhibiting higher concentrations near the solid surfaces, and the other showing similar concentrations in near-wall and bulk regions. We found that the movement characteristics of the two strains are similar in the near-wall region but are distinct in the bulk region. Near the wall, both strains have small velocities and mostly perform subdiffusive motions. In the bulk, however, the bacteria exhibiting wall accumulation have significantly higher motility (including faster swimming speeds and longer movement trajectories) than the one showing no wall accumulation. Furthermore, we found that bacteria exhibiting wall accumulation slowly migrate from the bulk region to the near-wall region, and the hydrodynamic effect alone is insufficient to generate this migration speed. Future studies are required to test if the current findings apply to other bacterial species and strains.

Bacterial Adhesion Strength on Titanium Surfaces Quantified by Atomic Force Microscopy: A Systematic Review

Few studies have been able to elucidate the correlation of factors determining the strength of interaction between bacterial cells and substrate at the molecular level. The aim was to answer the following question: What biophysical factors should be considered when analyzing the bacterial adhesion strength on titanium surfaces and its alloys for implants quantified by atomic force microscopy? This review followed PRISMA. The search strategy was applied in four databases. The selection process was carried out in two stages. The risk of bias was analyzed. One thousand four hundred sixty-three articles were found. After removing the duplicates, 1126 were screened by title and abstract, of which 57 were selected for full reading and 5 were included; 3 had a low risk of bias and 2 moderated risks of bias. (1) The current literature shows the preference of bacteria to adhere to surfaces of the same hydrophilicity. However, this fact was contradicted by this systematic review, which demonstrated that hydrophobic bacteria developed hydrogen bonds and adhered to hydrophilic surfaces; (2) the application of surface treatments that induce the reduction of areas favorable for bacterial adhesion interfere more in the formation of biofilm than surface roughness; and (3) bacterial colonization should be evaluated in time-dependent studies as they develop adaptation mechanisms, related to time, which are obscure in this review.

Microbial Motility at the Bottom of North America: Digital Holographic Microscopy and Genomic Motility Signatures in Badwater Spring, Death Valley National Park

Motility is widely distributed across the tree of life and can be recognized by microscopy regardless of phylogenetic affiliation, biochemical composition, or mechanism. Microscopy has thus been proposed as a potential tool for detection of biosignatures for extraterrestrial life; however, traditional light microscopy is poorly suited for this purpose, as it requires sample preparation, involves fragile moving parts, and has a limited volume of view. In this study, we deployed a field-portable digital holographic microscope (DHM) to explore microbial motility in Badwater Spring, a saline spring in Death Valley National Park, and complemented DHM imaging with 16S rRNA gene amplicon sequencing and shotgun metagenomics. The DHM identified diverse morphologies and distinguished run-reverse-flick and run-reverse types of flagellar motility. PICRUSt2- and literature-based predictions based on 16S rRNA gene amplicons were used to predict motility genotypes/phenotypes for 36.0-60.1% of identified taxa, with the predicted motile taxa being dominated by members of Burkholderiaceae and Spirochaetota. A shotgun metagenome confirmed the abundance of genes encoding flagellar motility, and a Ralstonia metagenome-assembled genome encoded a full flagellar gene cluster. This study demonstrates the potential of DHM for planetary life detection, presents the first microbial census of Badwater Spring and brine pool, and confirms the abundance of mobile microbial taxa in an extreme environment.

Zwitterionic surface chemistry enhances detachment of bacteria under shear

The ubiquitous nature of microorganisms, especially of biofilm-forming bacteria, makes biofouling a prevalent challenge in many settings, including medical and industrial environments immersed in liquid and subjected to shear forces. Recent studies have shown that zwitterionic groups are effective in suppressing bacteria and protein adhesion as well as biofilm growth. However, the effect of zwitterionic groups on the removal of surface-bound bacteria has not been extensively studied. Here we present a microfluidic approach to evaluate the effectiveness in facilitating bacteria detachment by shear of an antifouling surface treatment using (3-(dimethyl;(3-trimethoxysilyl)propyl)ammonia propane-1-sulfonate), a sulfobetaine silane (SBS). Control studies show that SBS-functionalized surfaces greatly increase protein (bovine serum albumin) removal upon rinsing. On the same surfaces, enhanced bacteria (Pseudomonas aeruginosa) removal is observed under shear. To quantify this enhancement a microfluidic shear device is employed to investigate how SBS-functionalized surfaces promote bacteria detachment under shear. By using a microfluidic channel with five shear zones, we compare the removal of bacteria from zwitterionic and glass surfaces under different shear rates. At times of 15 min, 30 min, and 60 min, bacteria adhesion on SBS-functionalized surfaces is reduced relative to the control surface (glass) under quiescent conditions. However, surface-associated bacteria on the SBS-functionalized glass and control show similar percentages of live cells, suggesting minimal intrinsic biocidal effect from the SBS-functionalized surface. Notably, when exposed to shear rates ranging from 104 to 105 s-1, significantly fewer bacteria remain on the SBS-functionalized surfaces. These results demonstrate the potential of zwitterionic sulfobetaine as effective antifouling coatings that facilitate the removal of bacteria under shear.

Advances in the superhydrophilicity-modified titanium surfaces with antibacterial and pro-osteogenesis properties: A review

In recent years, the rate of implant failure has been increasing. Microbial infection was the primary cause, and the main stages included bacterial adhesion, biofilm formation, and severe inhibition of implant osseointegration. Various biomaterials and their preparation methods have emerged to produce specific implants with antimicrobial or bactericidal properties to reduce implant infection caused by bacterial adhesion and effectively promote bone and implant integration. In this study, we reviewed the research progress of bone integration promotion and antibacterial action of superhydrophilic surfaces based on titanium alloys. First, the adverse reactions caused by bacterial adhesion to the implant surface, including infection and bone integration deficiency, are briefly introduced. Several commonly used antibacterial methods of titanium alloys are introduced. Secondly, we discuss the antibacterial properties of superhydrophilic surfaces based on ultraviolet photo-functionalization and plasma treatment, in contrast to the antibacterial principle of superhydrophobic surface morphology. Thirdly, the osteogenic effects of superhydrophilic surfaces are described, according to the processes of osseointegration: osteogenic immunity, angiogenesis, and osteogenic related cells. Finally, we discuss the challenges and prospects for the development of this superhydrophilic surface in clinical applications, as well as the prominent strategies and directions for future research.

Shining light in blind alleys: deciphering bacterial attachment in silicon microstructures

With new advances in infectious disease, antifouling surfaces, and environmental microbiology research comes the need to understand and control the accumulation and attachment of bacterial cells on a surface. Thus, we employ intrinsic phase-shift reflectometric interference spectroscopic measurements of silicon diffraction gratings to non-destructively observe the interactions between bacterial cells and abiotic, microstructured surfaces in a label-free and real-time manner. We conclude that the combination of specific material characteristics (i.e., substrate surface charge and topology) and characteristics of the bacterial cells (i.e., motility, cell charge, biofilm formation, and physiology) drive bacteria to adhere to a particular surface, often leading to a biofilm formation. Such knowledge can be exploited to predict antibiotic efficacy and biofilm formation, and enhance surface-based biosensor development, as well as the design of anti-biofouling strategies.

Degradable Vinyl Polymers for Combating Marine Biofouling

ConspectusMarine organisms such as barnacle larvae and spores of algae adhere to underwater surfaces leading to marine biofouling. This phenomenon has numerous adverse impacts on marine industries and maritime activities. Due to the diversity of fouling organisms and the complexity of the marine environment, it is a huge challenge to combat marine biofouling, which limits the development and utilization of marine resources. Since the International Marine Organization banned the use of tributyltin self-polishing copolymer (SPC) coatings in 2008, the development of an environmentally friendly and efficient anti-biofouling polymer has been the most important task in this field. Tin-free SPC is a well-established and widely used polymer binder for anti-biofouling coating today. Being a nondegradable vinyl polymer, SPC exhibits poor anti-biofouling performance in static conditions. Even more, such nondegradable polymers were considered to be a source of microplastics by the International Union for the Conservation of Nature in 2019. Recently, numerous degradable polymers, which can form dynamic surface through main chain scission, have been developed for preventing marine biofouling in static conditions. Nevertheless, the regulation of their degradation and mechanical properties is limited, and they are also difficult to functionalize. A new polymer combining the advantages of vinyl polymers and degradable polymers is needed. However, such a combination is a challenge since the former are synthesized via free radical polymerization whereas the latter are synthesized via ring-opening polymerization.In this Account, we review our recent progress toward degradable vinyl polymers for marine anti-biofouling in terms of polymerization methods and structures and properties of polymers. First, we introduce the strategies for preparing degradable vinyl polymers with an emphasis on hybrid copolymerization. Then, we present the synthesis and performance of degradable and hydrolyzable polyacrylates, degradable polyurethanes with hydrolyzable side groups, and surface-fragmenting hyperbranched polymers. Polymers with degradable main chains and hydrolyzable side groups combine the advantages of SPC and degradable polymers, so they are degradable and functional. They are becoming new-generation polymers with great potential for preparing high-efficiency, long-lasting, environmentally friendly and broad-spectrum coatings to inhibit marine biofouling. They can also find applications in wastewater treatment, biomedical materials, and other fields.

Strain specific motility patterns and surface adhesion of virulent and probiotic Escherichia coli

Bacterial motility provides the ability for bacterial dissemination and surface exploration, apart from a choice between surface colonisation and further motion. In this study, we characterised the movement trajectories of pathogenic and probiotic Escherichia coli strains (ATCC43890 and M17, respectively) at the landing stage (i.e., leaving the bulk and approaching the surface) and its correlation with adhesion patterns and efficiency. A poorly motile strain JM109 was used as a control. Using specially designed and manufactured microfluidic chambers, we found that the motion behaviour near surfaces drastically varied between the strains, correlating with adhesion patterns. We consider two bacterial strategies for effective surface colonisation: horizontal and vertical, based on the obtained results. The horizontal strategy demonstrated by the M17 strain is characterised by collective directed movements within the horizontal layer during a relatively long period and non-uniform adhesion patterns, suggesting co-dependence of bacteria in the course of adhesion. The vertical strategy demonstrated by the pathogenic ATCC43890 strain implies the individual movement of bacteria mainly in the vertical direction, a faster transition from bulk to near-surface swimming, and independent bacterial behaviour during adhesion, providing a uniform distribution over the surface.

Improving axial localization of weak phase particles in digital in-line holography

One shortcoming of digital in-line holography (DIH) is the low axial position accuracy due to the elongated particle traces in the reconstruction field. Here, we propose a method that improves the axial localization of DIH when applying it to track the motion of weak phase particles in dense suspensions. The proposed method detects particle positions based on local intensities in the reconstruction field consisting of scattering and incident waves. We perform both numerical and experimental tests and demonstrate that the proposed method has a higher axial position accuracy than the previous method based on the local intensities in the reconstructed scattered field. We show that the proposed method has an axial position error below 1.5 particle diameters for holograms with a particle concentration of 4700particles/mm³. The proposed method is further validated by tracking the Brownian motion of 1µmparticles in dense suspensions.

Separating twin images in digital holographic microscopy using weak scatterers

When using inline digital holographic microscopy (DHM) and placing the hologram plane within a particle suspension, both real and virtual images come into focus during reconstruction, limiting our ability to resolve three-dimensional (3D) particle distribution. Here, we propose a new method to distinguish between real and virtual images in the 3D reconstruction field. This new method is based on the use of weak scatterers, and the fact that the real and virtual images of weak scatterers display distinct intensity distributions along the optical axis. We experimentally demonstrate this method by localizing and tracking 1 µm particles in a 3D volume with a particle concentration ranging from 200 to 6000particles/mm³. Unlike previous approaches to address the virtual image problem, this method does not require the recording of multiple holograms or the insertion of additional optical components. The proposed method allows the hologram plane to be placed within the sample volume, and extends the capability of DHM to measure the 3D movements of particles in deep samples far away from the optical window.

2D vs 3D tracking in bacterial motility analysis

<abstract> <p>Digital holographic microscopy provides the ability to observe throughout a large volume without refocusing. This capability enables simultaneous observations of large numbers of microorganisms swimming in an essentially unconstrained fashion. However, computational tools for tracking large 4D datasets remain lacking. In this paper, we examine the errors introduced by tracking bacterial motion as 2D projections vs. 3D volumes under different circumstances: bacteria free in liquid media and bacteria near a glass surface. We find that while XYZ speeds are generally equal to or larger than XY speeds, they are still within empirical uncertainties. Additionally, when studying dynamic surface behavior, the Z coordinate cannot be neglected.</p> </abstract>

Effects of Electrokinetic Phenomena on Bacterial Deposition Monitored by Quartz Crystal Microbalance with Dissipation Monitoring

Bacterial deposition is the first step in the formation of microbial biofilms in environmental technology, and there is high interest in controlling such deposition. Earlier work indicated that direct current (DC) electric fields could influence bacterial deposition in percolation columns. Here, a time-resolved quartz crystal microbalance with dissipation monitoring (QCM-D) and microscopy-based cell counting were used to quantify DC field effects on the deposition of bacterial strains Pseudomonas putida KT2440 and Pseudomonas fluorescens LP6a at varying electrolyte concentrations and weak electric field strengths (0-2 V cm^-1). DC-induced frequency shifts (Δf), dissipation energy (ΔD), and ratios thereof (Δf/ΔD) proved as good indicators of the rigidity of cell attachment. We interpreted QCM-D signals using a theoretical approach by calculating the attractive DLVO-force and the shear and drag forces acting on a bacterium near collector surfaces in a DC electric field. We found that changes in DC-induced deposition of bacteria depended on the relative strengths of electrophoretic drag and electro-osmotic shear forces. This could enable the prediction and electrokinetic control of microbial deposition on surfaces in natural and manmade ecosystems.

Adaptive behaviors of planktonic Pseudomonas aeruginosa in response to the surface-deposited dead siblings

In this study, the 3D motion behaviors and the underlying adaptation mechanism of planktonic Pseudomonas aeruginosa (PAO1) in response to the deposited dead siblings nearby were explored. Utilizing a real-time 3D tracking technique, digital holographic microscopy (DHM), we demonstrate that planktonic cells near the surface covered with dead siblings have a lower density and a reduced 3D velocity compared with those upon viable ones. As a sign of chemosensory responses, bacteria swimming near the dead siblings exhibit increase in frequency of the 'flick' motion. Transcriptomic analysis by RNA-seq reveals an upregulated expression of dgcM and dgcE inhibited the movement of PAO1, accompanied by increased transcriptional levels of the virulence factor-related genes hcp1, clpV1, and vgrG1. Moreover, the decrease in l-glutamate and the increase in succinic acid in the metabolites of the dead bacteria layer promote the dispersion of planktonic bacteria. As a result, the dead siblings on a surface inhibit the bacterial accumulation and activate the adaptive defensive responses of planktonic PAO1 in the vicinity.

The interaction of Escherichia coli O157 :H7 and Salmonella Typhimurium flagella with host cell membranes and cytoskeletal components

Bacterial flagella have many established roles beyond swimming motility. Despite clear evidence of flagella-dependent adherence, the specificity of the ligands and mechanisms of binding are still debated. In this study, the molecular basis of Escherichia coli O157:H7 and Salmonella enterica serovar Typhimurium flagella binding to epithelial cell cultures was investigated. Flagella interactions with host cell surfaces were intimate and crossed cellular boundaries as demarcated by actin and membrane labelling. Scanning electron microscopy revealed flagella disappearing into cellular surfaces and transmission electron microscopy of S. Typhiumurium indicated host membrane deformation and disruption in proximity to flagella. Motor mutants of E. coli O157:H7 and S. Typhimurium caused reduced haemolysis compared to wild-type, indicating that membrane disruption was in part due to flagella rotation. Flagella from E. coli O157 (H7), EPEC O127 (H6) and S. Typhimurium (P1 and P2 flagella) were shown to bind to purified intracellular components of the actin cytoskeleton and directly increase in vitro actin polymerization rates. We propose that flagella interactions with host cell membranes and cytoskeletal components may help prime intimate attachment and invasion for E. coli O157:H7 and S. Typhimurium, respectively.

Method for 3D tracking behaviors of interplaying bacteria individuals

Behaviors of platonic bacteria individuals are profoundly influenced by their interplay. However, probing such interplay still remains a challenge since identification and tracking of bacterial individuals becomes difficult as they come close and interact with each other. Herein, we report 3D tracking of the motions of multiple bacteria by using digital holographic microscopy (DHM), where the subtle 3D behaviors can be characterized as bacteria approach and run away from each other. An algorithm was developed to identify and recover the gap between 3D trajectory segments raising by the interruption from other bacteria through lateral image recognition and axial loalization utilizing cost function. We value the performance of the algorithm in terms of the statistics in trajectory length and correct rate. The study clearly shows how the interplaying Escherichia coli alter their motions.

Layer-by-layer zwitterionic modification of diverse substrates with durable anti-corrosion and anti-fouling properties

A versatile coating strategy, which is suitable for the anti-corrosion and anti-fouling modification of chemically distinct substrates, is crucial in many industries. The immobilization of zwitterionic polymers onto the surface has been proven to be an excellent approach for the improvement of antibiofouling potency. However, the anti-corrosion property has not always been considered simultaneously. Herein, a layer-by-layer (LBL) zwitterionic surface modification strategy was proposed: the surface was first coated with a polydopamine (PDA) layer for anti-corrosion; then, by self-assembling a monolayer of 3-aminopropyl triethoxysilane (APTES), the anti-corrosion ability was further enhanced and the efficiency of grafting was improved; thereafter, by immobilizing the zwitterionic polysulfobetaine (PSB) polymer brush layer, the surface could effectively repel biofouling. The surface chemical composition and morphology characterization was performed by using attenuated total reflectance Fourier transform infrared (ATR-FTIR) spectroscopy, scanning electron microscopy (SEM), atomic force microscopy (AFM), and water contact angle measurements, demonstrating that the modification was stepwise introduced onto the surface. The thickness of coating was observed and measured by SEM cross-sectional analysis. In vitro studies revealed that the PSB coated surfaces dramatically reduced the adhesion of bovine serum albumin (BSA), bovine plasma fibrinogen (Fg), bovine γ-globulin (γ-GL), the mixture of these proteins, fibroblasts, E. coli and S. aureus with superior cytocompatibility and hemocompatibility. Moreover, the electrochemical impedance spectroscopy and acidic corrosion studies indicated that an excellent and durable anti-corrosion property was established successfully on the surfaces of stainless steel, cotton textile and wood plates, confirming the feasibility of the LBL surface modification strategy. Significantly, this LBL surface chemistry may be widely applied for the modification of other materials, such as biosensors, biomedical implants and/or devices, and marine equipment.

Mucus Architecture and Near-Surface Swimming Affect Distinct Salmonella Typhimurium Infection Patterns along the Murine Intestinal Tract

Mucus separates gut-luminal microbes from the tissue. It is unclear how pathogens like Salmonella Typhimurium (S.Tm) can overcome this obstacle. Using live microscopy, we monitored S.Tm interactions with native murine gut explants and studied how mucus affects the infection. A dense inner mucus layer covers the distal colon tissue, limiting direct tissue access. S.Tm performs near-surface swimming on this mucus layer, which allows probing for colon mucus heterogeneities, but can also entrap the bacterium in the dense inner colon mucus layer. In the cecum, dense mucus fills only the bottom of the intestinal crypts, leaving the epithelium between crypts unshielded and prone to access by motile and non-motile bacteria alike. This explains why the cecum is highly infection permissive and represents the primary site of S.Tm enterocolitis in the streptomycin mouse model. Our findings highlight the importance of mucus in intestinal defense and homeostasis.

•

Live imaging of Salmonella near-surface swimming on mouse colon inner mucus layer

•

Colon inner mucus layer traversal requires mucus breaches and flagellar propulsion

•

The mouse cecum lacks a continuous mucus layer, leaving epithelium tips uncovered

•

Exposed cecum epithelium tips are a hotspot for Salmonella infection

Motile Bacteria at Oil-Water Interfaces: Pseudomonas aeruginosa

Bacteria are important examples of active or self-propelled colloids. Because of their directed motion, they accumulate near interfaces. There, they can become trapped and swim adjacent to the interface via hydrodynamic interactions, or they can adsorb directly and swim in an adhered state with complex trajectories that differ from those in bulk in both form and spatiotemporal implications. We have adopted the monotrichous bacterium Pseudomonas aeruginosa PA01 as a model species and have studied its motion at oil-aqueous interfaces. We have identified conditions in which bacteria swim persistently without restructuring the interface, allowing detailed and prolonged study of their motion. In addition to characterizing the ensemble behavior of the bacteria, we have observed a gallery of distinct trajectories of individual swimmers on and near fluid interfaces. We attribute these diverse swimming behaviors to differing trapped states for the bacteria in the fluid interface. These trajectory types include Brownian diffusive paths for passive adsorbed bacteria, curvilinear trajectories including curly paths with radii of curvature larger than the cell body length, and rapid pirouette motions with radii of curvature comparable to the cell body length. Finally, we see interfacial visitors that come and go from the interfacial plane. We characterize these individual swimmer motions. This work may impact nutrient cycles for bacteria on or near interfaces in nature. This work will also have implications in microrobotics, as active colloids in general and bacteria in particular are used to carry cargo in this burgeoning field. Finally, these results have implications in engineering of active surfaces that exploit interfacially trapped self-propelled colloids.

Microscale topographic surfaces modulate three-dimensional migration of human spermatozoa

Sperm migration in the female reproductive tract is vital for reproduction. Surface topography is expected to be a vital determinant on this process. Using digital holographic microscopy (DHM), we investigated three-dimensional (3D) motion dynamics of human spermatozoa near a flat glass surface and microscale topographic surfaces with tunable roughness fabricated by a monolayer of closely packed silica colloidal particles. Generally, the rougher surfaces show negative impacts on the sperm migration through the hydrodynamic interactions modulated by surface topography, reflected as oscillating trajectories with wider swimming orientation distribution, reduced 3D velocity and less helical/hyperactivated/hyerhelical motions. Nevertheless, slight difference is observed for the sperm motion near the flat glass surface and the surface with a feature dimension similar to the sperm tail. Our study provides new insights in understanding and manipulating sperm motions.

Insignificant Impact of Chemotactic Responses of Pseudomonas aeruginosa on the Bacterial Attachment to Organic Pre-Conditioned RO Membranes

We investigated the impact of conditioning compositions on the way bacteria move and adhere to reverse osmosis (RO) membranes that have been pre-conditioned by organic compounds. We used humic acid (HA), bovine serum albumin (BSA), and sodium alginate (SA) to simulate conditioning layers on the RO membranes. First, we investigated the chemotactic responses of Pseudomonas aeruginosa PAO1 to the organic substances and the impact of changes in physicochemical characteristics of pre-conditioned membranes on bacterial attachment. Second, we observed bacterial attachment under the presence or absence of nutrients or microbial metabolic activity. Results showed that there was no relationship between the chemotactic response of P. aeruginosa PAO1 and the organic substances, and the changes in hydrophobicity, surface free energy, and surface charge resulting from changing the composition of the conditioning layer did not seem to affect bacterial attachment, whereas changing the roughness of the conditioned membrane exponentially did (exponential correlation coefficient, R² = 0.85). We found that the initial bacterial attachment on the membrane surface is influenced by (i) the nutrients in the feed solution and (ii) the microbial metabolic activity, whereas the chemotaxis response has a negligible impact. This study would help to establish a suitable strategy to manage bacterial attachment.

Three-Dimensional Bacterial Motions near a Surface Investigated by Digital Holographic Microscopy: Effect of Surface Stiffness

Surface stiffness plays a critical role in bacterial adhesion, but the mechanism is unclear since the bacterial motion before adhesion is overlooked. Herein, the three-dimensional (3D) motions of Escherichia coli and Pseudonomas sp. nov 776 onto poly(dimethylsiloxane) (PDMS) surfaces with varying stiffness before adhering were monitored by digital holographic microscopy (DHM). As Young's modulus (E) of the PDMS surface decreases from 278.1 to 3.4 MPa, the adhered E. coli and Pseudonomas sp. decrease in number by 40.4 and 34.9%, respectively. Atomic force microscopy (AFM) measurements show that the adhesion force of bacteria to the surface declines with the decreased surface stiffness. In contrast, a nontumbling mutant of adhered E. coli (HCB1414 with the adaptive function being partially deficient) decreases much less (by 18.4%). On the other hand, the tumble frequency (F_t) of E. coli HCB1 and flick frequency (F_f) of Pseudomonas sp. increase as the surface stiffness decreases, and the motion bias (B_θ) of Pseudomonas sp. also increases. These facts clearly indicate that the bacteria have adapted responses to the surface stiffness. RNA sequencing (RNA-seq) reveals that the downregulated Cph2 and CsrA as well as the upregulated GcvA of swimming E. coli HCB1 in bulk near the softer surface promote the bacterial motility.

Alternating electric fields induce a period-dependent motion of Escherichia coli in three-dimension near a conductive surface

It has been demonstrated that electric fields can minimize surface adhesion of bacteria, but how they affect the near-surface bacterial dynamics has remained largely overlooked. In the present study, the three-dimensional motions of Escherichia coli (E. coli) HCB1 and HCB1414 near a conductive surface under alternating-current (AC) electric fields were monitored with digital holographic microscopy. The period (T) of AC fields exhibited profound effects on near-surface bacterial behavioral patterns and thus affected the surface adhesiveness of E. coli. When T ≥ 1 s, HCB1 cells tumble frequently, and both two strain cells increasingly undergo subdiffusive motions compared to the case without electric fields. The bacterial density near the surface varies due to galvanotaxis depending on the initial polarization of the surface. For shorter periods (T ≤ 0.1 s), the electric fields reduce the near-surface bacterial density by 10%-20% with the surface as either an anode or a cathode. The AC fields directly disturb the intrinsic bacterial rotation. The bacterial body exhibits strong wobbling at T ≥ 1 s. Such wobbling was suppressed with decreasing T, which reduces the collisions between E. coli and the surface and thus leads to declining bacterial density. These results suggest that the use of low-density AC fields with tunable T may be a promising antifouling strategy and merits further investigations.

Dynamic surface antifouling: mechanism and systems

Marine biofouling is a global problem today. High efficiency and eco-friendly antifouling systems are in pressing need. In recent years, we have proposed the concept of dynamic surface antifouling (DSA). That is, a continuously changing surface can effectively prevent marine fouling organisms from landing and adhesion. Based on this strategy, we developed coatings with dynamic surfaces by using degradable polymers including polyester-polyurethane, modified polyester and poly(ester-co-acrylate). They exhibit tunable renewability, and excellent antifouling and mechanical performance. Moreover, the polymers can serve as carrier and controlled release systems of antifoulants so that they have long service life. This paper reviews the progress and trends in marine anti-biofouling, and presents the mechanism and systems of DSA.

Improving axial resolution for holographic tracking of colloids and bacteria over a wide depth of field by optimizing different factors

Improving the axial resolution for multiparticle three-dimensional (3D) holographic tracking is crucial but challenging. Here we study the impacts of incident light power, uniformity of the illumination as well as image pixel size on the axial tracking resolution for digital holographic microscopy (DHM). We demonstrate that the resolution highly depends on the image pixel size and the uniformity of the illumination. A 3D localization algorithm based on local-intensity-maxima searching and a Gaussian fit to the integrated intensity of the reconstructed lateral images along the axial direction proves a robust strategy to enhance the axial resolution for colloids and bacteria within a wide depth of field over several tens of micrometers.

Aggregation-Induced Emission Probe for Study of the Bactericidal Mechanism of Antimicrobial Peptides

Multidrug resistant bacterial infection has become one of the most serious threats to human health. Antimicrobial peptides (AMPs) have been identified as potential alternatives to antibiotics owing to their excellent bactericidal activity. However, the complicated bactericidal mechanism of AMPs is still poorly understood. Fluorescence imaging has many advantages in terms of dynamic monitoring, easy operation, and high sensitivity. In this study, we developed an aggregation-induced emission (AIE)-active probe AMP-2HBT by decorating the antimicrobial peptide HHC36 (KRWWKWWRR) with an AIEgen of 2-(2-hydroxyphenyl)benzothiazole (HBT). This AIE-active probe exhibited an excellent light-up fluorescence after binding with bacteria, enabling a real-time monitoring of the binding process. Moreover, a similar time-dependent bactericidal kinetics was observed for the AIE-active probe and HHC36 peptide, which indicated that the bactericidal activity of the peptide was not compromised by decorating with the AIEgen. The bactericidal mechanism of HHC36 peptide was further investigated by super-resolution fluorescence microscopy, transmission electron microscopy (TEM), and scanning electron microscopy (SEM), which suggested that the probe tended to accumulate on the bacterial membrane and efficiently disrupt the membrane structure to kill both Gram-positive and -negative bacteria. This AIE-active probe thus provided a convenient tool to investigate the bactericidal mechanism of AMPs.

Betulin-Constituted Multiblock Amphiphiles for Broad-Spectrum Protein Resistance

Multiblock-like amphiphilic polyurethanes constituted by poly(ethylene oxide) and biosourced betulin are designed for antifouling and synthesized by a convenient organocatalytic route comprising tandem chain-growth and step-growth polymerizations. The doping density of betulin (D_B) in the polymer chain structure is readily varied by a mixed-initiator strategy. The spin-coated polymer films exhibit unique nanophase separation and protein resistance behaviors. Higher D_B leads to enhanced surface hydrophobicity and, unexpectedly, improved protein resistance. It is found that the surface holds molecular-level heterogeneity when D_B is substantially high due to restricted phase separation; therefore, broad-spectrum protein resistance is achieved despite considerable surface hydrophobicity. As D_B decreases, the distance between adjacent betulin units increases so that hydrophobic nanodomains are formed, which provide enough landing areas for relatively small-sized proteins to adsorb on the surface.

Level of Fimbriation Alters the Adhesion of Escherichia coli Bacteria to Interfaces

Adhesion of bacteria to interfaces is the first step in pathogenic infection, in biofilm formation, and in bioremediation of oil spills and other pollutants. Bacteria use a variety of surface structures to promote interfacial adhesion, with the level of expression of these structures varying in response to local conditions and environmental signals. Here, we investigated how overexpression of type 1 fimbriae, one such appendage, modifies the ability of Escherichia coli to adhere to solid substrates, via biofilm formation and yeast agglomeration, and to oil/water interfaces, via a microbial adhesion to hydrocarbon assay. A plasmid that enables inducible expression of E. coli MG1655 type 1 fimbriae was transformed into fimbriae-deficient mutant strain MG1655ΔfimA. The level of fimH gene expression in the engineered strain, measured using quantitative real-time PCR, could be tuned by changing the concentration of inducer isopropyl β-d-1-thiogalactopyranoside (IPTG), and was higher than that in strain MG1655. Increasing the degree of fimbriation only slightly modified the surface energy and zeta potential of the bacteria, but enhanced their ability to agglomerate yeast cells and to adhere to solid substrates (as measured by biofilm formation) and to oil/water interfaces. We anticipate that the tunable extent of fimbriation accessible with this engineered strain can be used to investigate how adhesin expression modifies the ability of bacteria to adhere to interfaces and to actively self-assemble there.

Three-Dimensional Bacterial Behavior near Dynamic Surfaces Formed by Degradable Polymers

Understanding the behavior of bacteria near biodegradable surfaces is critical for the development of biomedical and antibiofouling materials. By using digital holographic microscopy (DHM), we investigated the three-dimensional (3D) behavior of Escherichia coli and Pseudomonas sp. in lipase-containing aquatic environments near dynamic surfaces constructed by biodegradable poly(ε-caprolactone) (PCL)-based polymers in real time. As the enzymatic degradation rate increases, the percentage of near-surface subdiffusive bacteria and consequently, the irreversible adhesion decreases. Atomic force microscopy (AFM) measurements reveal that the adhesion force between bacteria and the surfaces decreases with an increasing degradation rate. In addition, the degradation products elicit a negative chemotactic response in E. coli, further driving them away from the dynamic surfaces through more frequent tumbling motion. Our study clearly demonstrates that bacterial adhesion can be reduced on dynamic surfaces formed by degradable polymers.