Synergistic Effects of Gold-Palladium Nanoalloys and Reducible Supports on the Catalytic Reduction of 4-Nitrophenol

Magnetic Silver Nanoparticles Stabilized by Superhydrophilic Polymer Brushes with Exceptional Kinetics and Catalysis

Stimuli-responsive catalysts with exceptional kinetics and complete recoverability for efficient recyclability are essential in, for example, converting pollutants and hazardous organic compounds into less harmful chemicals. Here, we used a novel approach to stabilize silver nanoparticles (NPs) through magneto/hydro-responsive anionic polymer brushes that consist of poly (acrylic acid) (PAA) moieties at the amine functional groups of chitosan. Two types of responsive catalyst systems with variable silver loading (wt.%) of high and low (PAAgCHI/Fe3O4/Ag (H, L)) were prepared. The catalytic activity was evaluated by monitoring the reduction of organic dye compounds, 4-nitrophenol and methyl orange in the presence of NaBH4. The high dispersity and hydrophilic nature of the catalyst provided exceptional kinetics for dye reduction that surpassed previously reported nanocatalysts for organic dye reduction. Dynamic light scattering (DLS) measurements were carried out to study the colloidal stability of the nanocatalysts. The hybrid materials not only showed enhanced colloidal stability due to electrostatic repulsion among adjacent polymer brushes but also offered more rapid kinetics when compared with as-prepared Ag nanoparticles (AgNPs), which results from super-hydrophilicity and easy accumulation/diffusion of dye species within polymer brushes. Such remarkable kinetics, biodegradability, biocompatibility, low cost and facile magnetic recoverability of the Ag nanocatalysts reported here contribute to their ranking among the top catalyst systems reported in the literature. It was observed that the apparent catalytic rate constant for the reduction of methyl orange dye was enhanced, PAAgCHI/Fe3O4/Ag (H) ca. 35-fold and PAAgCHI/Fe3O4/Ag (L) ca. 23-fold, when compared against the as prepared AgNPs. Finally, the regeneration and recyclability of the nanocatalyst systems were studied over 15 consecutive cycles. It was demonstrated that the nanomaterials display excellent recyclability without a notable loss in catalytic activity.

Temperature-Dependent Activity of Gold Nanocatalysts Supported on Activated Carbon in Redox Catalytic Reactions: 5-Hydroxymethylfurfural Oxidation and 4-Nitrophenol Reduction Comparison

In this study, the temperature-dependent activity of Au/AC nanocatalysts in redox catalytic reactions was investigated. To this end, a series of colloidal gold catalysts supported on activated carbon and titania were prepared by the sol immobilization method employing polyvinyl alcohol as a polymeric stabilizer at different hydrolysis degrees. The as-synthesized materials were widely characterized by spectroscopic analysis (XPS, XRD, and ATR-IR) as well as TEM microscopy and DLS/ELS measurements. Furthermore, 5-hydroxymethylfurfural (HMF) oxidation and 4-nitrophenol (4-NP) reduction were chosen to investigate the catalytic activity as a model reaction for biomass valorization and wastewater remediation. In particular, by fitting the hydrolysis degree with the kinetic data, volcano plots were obtained for both reactions, in which the maximum of the curves was represented relative to hydrolysis intermediate values. However, a comparison of the catalytic performance of the sample Au/AC_PVA-99 (hydrolysis degree of the polymer is 99%) in the two reactions showed a different catalytic behavior, probably due to the detachment of polymer derived from the different reaction temperature chosen between the two reactions. For this reason, several tests were carried out to investigate deeper the observed catalytic trend, focusing on studying the effect of the reaction temperature as well as the effect of support (metal–support interaction) by immobilizing Au colloidal nanoparticles on commercial titania. The kinetic data, combined with the characterization carried out on the catalysts, confirmed that changing the reaction conditions, the PVA behavior on the surface of the catalysts, and, therefore, the reaction outcome, is modified.

Bimetallic nanocomposite (Ag-Au, Ag-Pd, Au-Pd) synthesis using gum kondagogu a natural biopolymer and their catalytic potentials in the degradation of 4-nitrophenol

Bimetallic nanoparticles (BNPs) constitute two different metal elements and exhibit relatively superior mechanistic and catalytic efficacies owing to their synergistic functions over monometallic nanoparticles. In the present study various bimetallic Ag-Au, Ag-Pd, Au-Pd nanoparticles were synthesized using a natural biopolymer gum kondagogu (GK) as a reducing and capping agent, by a simple and cost-effective method. The synthesized BNPs when characterized using UV-vis spectroscopy revealed a specific surface plasmon resonance band (SPR) of each nanocomposite. The average particle size of Ag-Au, Ag-Pd, and Au-Pd BNPs was found to be 23 ± 10.3, 21 ± 7.6, and 23 ± 9.4 nm respectively based on transmission electron microscopy analysis. Surface morphology and functional groups on the gum matrix of GK-BNPs were analyzed by XRD and FT-IR respectively. The bimetallic nanocomposites were evaluated for their catalytic reduction of 4-nitrophenol (4-NP) to 4-aminophenol in the presence of NaBH₄. The kinetic studies performed, depicted rate constants for Ag-Au, Ag-Pd, and Au-PdNPs as 0.31, 0.39, and 0.28 min^-1 respectively. The catalytic efficiencies of three bimetallic nanocomposites were of the following order Ag-Pd > Ag-Au > Au-Pd. This study establishes the catalytic potentials of the three different bimetallic nanocomposites in the reduction of 4-NP an environmental pollutant, and the impact of their synergistic property.

Promotion effects of halloysite nanotubes on catalytic activity of Co3O4 nanoparticles toward reduction of 4-nitrophenol and organic dyes

Nanosized clay minerals have been widely used as efficient supports to immobilize catalyst nanoparticles. However, clay support-induced interactions and their influences on the catalyst structure and performance currently have not been fully understood. Here, Co₃O₄ nanoparticles supported on halloysite nanotubes (HNTs) were synthesized by a facile deposition-precipitation approach followed by thermal treatment. A series of characterization methods were employed for the Co₃O₄/HNTs hybrid nanostructure to identify its crystal phase, chemical composition, morphology, specific surface area, surface chemical states, and redox property. Characterization results showed that HNTs not only impacted the particle size of Co₃O₄ nanoparticles, but also modified surface chemical surface states of the later, which ultimately promoted the effective catalytic reduction of 4-nitrophenol (4-NP) and azo dyes with sodium borohydride. The interaction between HNTs and Co₃O₄ nanoparticles was found to shorten the induction period of the 4-NP reduction. Meanwhile, the Co₃O₄/HNTs catalyst for the 4-NP reduction achieved an apparent rate constant of 0.265 min^-1 and an activity parameter of 1.63 × 10⁴ min^-1 g^-1 as well as a turnover frequency of 4.37 min^-1. In addition, Co₃O₄/HNTs showed an improvement in reduction efficiency of the azo dyes when compared to bare Co₃O₄ nanoparticles.

Effect of dz2 orbital electron-distribution of La-based inorganic perovskites on surface kinetics of a model reaction

Lanthanum-based perovskites, LaMO₃ (M = Co, Fe, Mn, Ni, Cr, Cu, Zn) were synthesized using sol–gel method and characterised using both physical and chemical techniques.

Hierarchically porous BiOCl@NiCo2O4 nanoplates as low-cost and highly efficient catalysts for the discoloration of organic contaminants in aqueous media

BiOCl@NiCo₂O₄ exhibits remarkable catalytic activity and stability and can be used to deal with real contaminated water samples.

Sonication-Assisted Synthesis of Bimetallic Hg/Pd Alloy Nanoparticles for Catalytic Reduction of Nitrophenol and its Derivatives

In this article, we report a facile approach for the synthesis of an inexpensive catalyst of bimetallic Hg/Pd alloys comprising nanoparticles with various structures using a unique ultrasonic reaction that is conducted without the use of any reducing agent. The nanoparticles of Hg/Pd alloys (HgPd and Hg₂Pd₅) were achieved for the first time by sonicating an aqueous solution of Palladium (II) nitrate with metallic liquid mercury, as evidenced by XRD. EDS further confirmed the presence of Pd and Hg elements in the alloy. The surface morphology and structure of the nanoparticles have been systematically investigated by HRSEM, HRTEM and SAED pattern. In order to explore the catalytic activity of the as-synthesized nanoalloys, the catalytic reduction of 4-nitrophenol and a few other nitrophenol derivatives were investigated. Excellent catalytic activity was obtained for Hg/Pd (1:1) alloy, and the rate constant for the reduction of 4-NP with Hg/Pd at room temperature was found to be 58.4 × 10^-3 s^-1, which is possibly the highest ever reported. The catalyst exhibited superior stability and reusability when compared with those reported in the literature for other catalysts based on noble metals.

Ecofriendly Synthesis of Fluorescent Nitrogen-Doped Carbon Dots from Coccinia grandis and its Efficient Catalytic Application in the Reduction of Methyl Orange

Facile and fast hydrothermal process for the synthesis of nitrogen doped carbon dots (N-CDs) from Coccinia grandis (C. grandis) extract is discussed here. The morphology of prepared N-CDs was characterized by high-resolution transmission electron microscopy (HR-TEM), energy dispersive X-ray spectroscopy (EDS), and selected area electron diffraction (SAED) method. The optical properties of the prepared N-CDs were revealed by Ultraviolet-Visible (UV-Vis) and photoluminescence spectroscopy. X-ray diffraction (XRD) and Raman spectroscopic techniques were employed to examine the crystallinity and graphitization of prepared N-CDs. The nitrogen doping was confirmed by Fourier transform infrared (FT-IR) spectroscopy and X-ray photoelectron spectroscopy (XPS). The prepared nitrogen doped carbon dots released blue fluorescence at 405 nm beneath the excitation of 310 nm. The prepared N-CDs influenced the catalytic performance of NaBH₄ in the reduction of methyl orange. The rate constant for the reduction of organic dye (methyl orange) by NaBH₄ in the presence of the prepared green catalyst was also determined.

Inorganic Perovskite-Induced Synergy on Highly Selective Pd-Catalyzed Hydrogenation of Cinnamaldehyde

The transformation of various organic molecules into value-added chemicals has been driven by the success in development of highly active catalytic systems. Heterogeneous catalysts have found use in many industrial processes by virtue of their ease of separation and high activities in various reactions. However, many processes employing heterogeneous catalysts in the transformation of organic molecules suffer significantly when it comes to product selectivity. Herein, we report on the synthesis of highly selective palladium nanoparticle (Pd NP)-containing catalysts. The heterogeneous catalysts reported herein consist of active mixed-metal oxides, in the form of perovskites as catalysts, and as catalytic supports for Pd NPs. The activity of pure perovskites when applied as catalysts in the hydrogenation of cinnamaldehyde is 3 factors lower compared with Pd NPs immobilized on them. However, considering the fact that perovskites achieved percentage conversions between 18 and 25% in a short period of time makes them perfect candidates to replace platinum group metals in the future. In addition to being earmarked as the future of catalysis, perovskites induced a synergistic effect on the conversion of the substrate compared to when Pd NPs are immobilized on the silica support. Furthermore, these catalysts are 100% selective to hydrocinnamaldehyde and stable for up to five catalytic cycles. With regard to reusability of the catalysts, Pd/LaFeO₃ was used as a benchmark catalyst and revealed the need for surface restructuring of the catalyst for optimum activity.

Enhanced Selective Production of Carbonyl Products for Aerobic Oxidation of Benzylic Alcohols over Mesoporous Fe2O3 Supported Gold Nanoparticles

Ordered mesoporous Fe2O3 supported gold nanoparticles with a desired specific surface area and porous structure (Au/meso-Fe2O3) was successfully fabricated with a hard templating method by using KIT-6 as the template. The morphology and physico-chemical properties of Au/meso-Fe2O3 were characterized by X-ray diffraction (XRD), scanning electron microscope (SEM) and transmission electron microscope (TEM), etc. The gold nanoparticles are highly dispersed on the surface of the mesoporous Fe2O3. The catalytic performance of the synthesized catalyst was studied for the aerobic oxidation of benzylic alcohols in β–O–4 linked lignin model dimers to the corresponding carbonyl products under atmosphere pressure. Au/meso-Fe2O3 shows an enhanced activity for the aerobic oxidation of 1-phenylethanol in comparison with that of Au/bulk-Fe2O3. The promoted catalytic activity is related to the confined porous structure of mesoporous Fe2O3 and more boundaries contact between gold and meso-Fe2O3, which shows that the porous structure of the support has a significant influence on the activity of gold catalysts.

Bimetallic Nanoparticles Anchored on Core-Shell Support as an Easily Recoverable and Reusable Catalytic System for Efficient Nitroarene Reduction

We report an easily recoverable and reusable versatile magnetic catalyst (Fe3O4@CS_AgNi, where CS = chitosan) for organic reduction reactions. The catalytic system is prepared by dispersing AgNi bimetallic nanoparticles on the magnetite core-shell (Fe3O4@CS). The as-synthesized catalyst has been characterized by spectroscopic techniques, such as IR, UV-vis, and X-ray photoelectron spectroscopy (XPS), and analytical tools, such as thermogravimetric analysis, powder X-ray diffraction, Brunauer-Emmett-Teller adsorption, FEG-scanning electron microscopy, high-resolution transmission electron microscopy (HR-TEM), inductively coupled plasma-atomic emission spectroscopy, and magnetic measurements. HR-TEM studies indicate the core-shell structure of Fe3O4@CS and confirm the presence of AgNi nanoparticles on the surface of Fe3O4@CS spheres. IR spectral and XPS studies lend evidence for the occurrence of a strong chemical interaction between the amino groups of CS and AgNi nanoparticles. The nano-catalyst Fe3O4@CS_AgNi rapidly reduces p-nitrophenol to p-aminophenol using NaBH4 as the reductant within a few minutes under ambient conditions (as monitored by UV-visible spectroscopy). The utility of this catalytic system has also been extended to the reduction of other nitroarenes. A strong interaction between Fe3O4@CS and AgNi nanoparticles impedes the leaching of AgNi nanoparticles from the core-shell support, leading to excellent reusability of the catalyst.

Controllable synthesis of mussel-inspired catechol-formaldehyde resin microspheres and their silver-based nanohybrids for catalytic and antibacterial applications

Size-controlled CFR microspheres and their silver-based nanohybrids were constructed and the nanohybrids display high catalytic reduction activity and antibacterial properties.

Ultra-fine Pd nanoparticles confined in a porous organic polymer: A leaching-and-aggregation-resistant catalyst for the efficient reduction of nitroarenes by NaBH4

Porous organic polymers (POPs) containing nitrogenous substituents have potential practical applications as heterogeneous catalysts based upon controlled porous structure and surface-anchored noble metal nanoparticles (NMNPs). In this work we prepared a POP material from piperazine and cyanuric chloride starting materials (PC-POP). The PC-POP material contains numerous triazinyl moieties, thus rendering the pores hydrophobic. Subsequently, by means of a novel reverse double-solvent approach (RDSA), microdroplets of Pd(AcO)₂/CH₂Cl₂ were introduced into the hydrophobic pores of PC-POP in an aqueous environment; Pd(II) was rapidly reduced by NaBH₄ to form ultra-fine Pd NPs and confined within the pores of PC-POP at high dispersity. The extensive porosity and dispersity of the Pd NPs made the active sites readily accessible, and led to efficient mass transfer. Thus, Pd@PC-POP exhibits superior catalytic performance in catalytic reduction of various nitroarenes. Furthermore, Pd@PC-POP has excellent recyclability, without significant loss of activity nor leaching of Pd active sites during 10 successive reaction cycles. This work points to a practical and cost-effective approach to preparation of POP materials, and also for confining ultra-fine NMNPs in POPs for use as catalysts.

Mussel-inspired construction of thermo-responsive double-hydrophilic diblock copolymers-decorated reduced graphene oxide as effective catalyst supports for highly dispersed superfine Pd nanoparticles

Well-dispersed ultrafine palladium nanoparticles supported by reduced graphene oxide functionalized with catechol-terminated thermo-responsive block copolymer (PdNPs@BPrGO) were successfully constructed for highly efficient heterogeneous catalytic reduction. We first synthesized a novel temperature-responsive episulfide-containing double-hydrophilic diblock copolymer, poly(poly(ethylene glycol) methyl ether methacrylate-co-2,3-epithiopropyl methacrylate)-block-poly(N-isopropylacrylamide) (P(PEGMA-co-ETMA)-b-PNIPAM), through a reversible addition-fragmentation chain transfer (RAFT) polymerization utilizing a chain-transfer agent with a catechol unit as the end group. The obtained block copolymers can be facilely anchored to the surface of GO via mussel-inspired chemistry. The PdNPs were loaded on GO decorated with block copolymer brushes (BPrGO) as a support via the in situ reduction of palladium precursors with the episulfide ligands of the block copolymer as a stabilizer. The resulting PdNPs@BPrGO nanohybrid catalyst had good water dispersibility and stability. Furthermore, a low dosage of PdNPs@BPrGO catalyst exhibited excellent catalytic performance in the reduction of methylene blue and nitrophenols. The performance was attributed to the ability of PdNPs@BPrGO to facilitate the diffusion of reactants compared to PdNPs@GO without polymer modification. PdNPs@BPrGO also possessed an interesting temperature-responsive catalytic property due to the reversible "coil-to-globule" phase transition behaviour of PNIPAM blocks onto the surface of catalyst. The PdNPs@BPrGO catalyst was successfully recovered and reused five times without any detectible loss in catalytic activity, demonstrating its great potential in a wide range of industrial catalytic applications.

Performance of Preformed Au/Cu Nanoclusters Deposited on MgO Powders in the Catalytic Reduction of 4-Nitrophenol in Solution

The deposition of preformed nanocluster beams onto suitable supports represents a new paradigm for the precise preparation of heterogeneous catalysts. The performance of the new materials must be validated in model catalytic reactions. It is shown that gold/copper (Au/Cu) nanoalloy clusters (nanoparticles) of variable composition, created by sputtering and gas phase condensation before deposition onto magnesium oxide powders, are highly active for the catalytic reduction of 4-nitrophenol in solution at room temperature. Au/Cu bimetallic clusters offer decreased catalyst cost compared with pure Au and the prospect of beneficial synergistic effects. Energy-dispersive X-ray spectroscopy coupled with aberration-corrected scanning transmission electron microscopy imaging confirms that the Au/Cu bimetallic clusters have an alloy structure with Au and Cu atoms randomly located. Reaction rate analysis shows that catalysts with approximately equal amounts of Au and Cu are much more active than Au-rich or Cu-rich clusters. Thus, the interplay between the Au and Cu atoms at the cluster surface appears to enhance the catalytic activity substantially, consistent with model density functional theory calculations of molecular binding energies. Moreover, the physically deposited clusters with Au/Cu ratio close to 1 show a 25-fold higher activity than an Au/Cu reference sample made by chemical impregnation.

Pyrolysis of metal–organic framework (CuBTC) decorated filter paper as a low-cost and highly active catalyst for the reduction of 4-nitrophenol

The fabrication of noble metal free catalysts with excellent performance and high stability by a simple, efficient, general and low-cost approach remains an urgent task for solving the problem of resource shortage.

Kinetic investigation for the catalytic reduction of nitrophenol using ionic liquid stabilized gold nanoparticles

We demonstrate the synthesis of gold nanoparticles (AuNP) stabilized by 1-butyl-3-hexadecyl imidazolium bromide (Au@[C₄C₁₆Im]Br) and their use as a catalyst for the reduction of nitrophenol. The AuNPs show excellent stability in presence of [C₄C₁₆Im]Br ionic liquids for the reduction of 4-nitrophenol and 2-nitrophenol using NaBH₄ as a reducing agent. The detailed kinetics for the reduction of 4-nitrophenol and 2-nitrophenol were investigated and the catalytic activity of Au@[C₄C₁₆Im]Br was evaluated. The pseudo first-order rate constant (k_app) values for 4-nitrophenol was observed to be greater than that of 2-nitrophenol and explained on the basis of hydrogen bonding present in 2-nitrophenol. Au@[C₄C₁₆Im]Br showed good separability and reusability and hence, it can be used for the complete reduction of nitrophenols in multiple cycles. The Langmuir–Hinshelwood reaction mechanism is elucidated for reduction of 4-nitrophenol by Au@[C₄C₁₆Im]Br nanocatalyst on the basis of the k_app values. The thermodynamic activation parameters such as activation energy, enthalpy of activation and entropy of activation were determined and explained using the temperature dependent kinetics for the reduction of nitrophenol using Au@[C₄C₁₆Im]Br. The above results reveal that the Au@[C₄C₁₆Im]Br nanocatalyst demonstrates excellent catalytic performance for the reduction of nitrophenol by NaBH₄ at room temperature.

Catalytic reduction of nitrophenol using ionic liquid stabilized AuNPs.

Synthesis of Au-Pd Bimetallic Nanoflowers for Catalytic Reduction of 4-Nitrophenol

Due to the great potential to improve catalytic performance, gold (Au) and palladium (Pd) bimetallic catalysts have prompted structure-controlled synthesis of Au-Pd nanoalloys bounded by high-index facets. In this work, we prepared Au-Pd bimetallic nanoflowers (NFs) with a uniform size, well-defined dendritic morphology, and homogeneous alloy structure in an aqueous solution by seed-mediated synthesis. The prepared bimetallic NFs were fully characterized using a combination of transmission electron microscopy, Ultraviolet-Visible (UV-vis) spectroscopy, inductively coupled plasma optical emission spectroscopy, and cyclic voltammetry measurements. The catalytic activities of the prepared Au-Pd nanoparticles for 4-nitrophenol reduction were also investigated, and the activities are in the order of Au@Pd NFs > Au-Pd NFs (Au₁Pd₁ core) > Au-Pd NFs (Au core), which could be related to the content and exposed different reactive surfaces of Pd in alloys. This result clearly demonstrates that the superior activities of Au-Pd alloy nanodendrites could be attributed to the synergy between Au and Pd in catalysts.

MxNi100−x (M = Ag, and Co) nanoparticles supported on CeO2 nanorods derived from Ce–metal organic frameworks as an effective catalyst for reduction of organic pollutants: Langmuir–Hinshelwood kinetics and mechanism

Ag_xNi_100−x and Co_xNi_100−x bimetallic nanoparticles supported on CeO₂ nanorods showed remarkable catalytic activity in a reduction reaction.