Reversible Shape Transformation of Ultrathin Polydopamine-Stabilized Droplet

Flattened and Wrinkled Encapsulated Droplets: Shape Morphing Induced by Gravity and Evaporation

We report surprising morphological changes of suspension droplets (containing class II hydrophobin protein HFBI from Trichoderma reesei in water) as they evaporate with a contact line pinned on a rigid solid substrate. Both pendant and sessile droplets display the formation of an encapsulating elastic film as the bulk concentration of solute reaches a critical value during evaporation, but the morphology of the droplet varies significantly: for sessile droplets, the elastic film ultimately crumples in a nearly flattened area close to the apex while in pendant droplets, circumferential wrinkling occurs close to the contact line. These different morphologies are understood through a gravito-elastocapillary model that predicts the droplet morphology and the onset of shape changes, as well as showing that the influence of the direction of gravity remains crucial even for very small droplets (where the effect of gravity can normally be neglected). The results pave the way to control droplet shape in several engineering and biomedical applications.

Aqueous dispersion and tuning surface charges of polytetrafluoroethylene particles by bioinspired polydopamine-polyethyleneimine coating via one-step method

We propose a surface modification of poorly dispersive polytetrafluoroethylene (PTFE) particles via bioinspired polydopamine-polyethyleneimine (PDA-PEI) which conferred PTFE particles a uniform dispersion in aqueous medium. With increasing dopamine concentration in the reaction solution, dispersity of PTFE particles improved and the surface charges of particles changed from negative to positive due to an increase of surface coverage of PDA-PEI layers. Simplicity of the method here outlines an attractive route for surface modification of inert surfaces useful for large-scale applications.

Bio-inspired Incrustation Interfacial Polymerization of Dopamine and Cross-linking with Gelatin toward Robust, Biodegradable Three-Dimensional Hydrogels

In nature, laccase enzymatically catalyzes the reaction of phenolic compounds with oxygen to produce hardened surfaces known as cuticles on insects and plants. Inspired by this natural process, the present work investigated a robust, biodegradable hydrogel synthesized from dopamine and gelatin. This gel is obtained by the oxidation of dopamine dissolved in water, after which the resulting quinone compound automatically undergoes self-polymerization. The oxidized dopamine subsequently undergoes Schiff base and Michael addition reactions with gelatin, such that the exposed gelatin surface cross-links to generate a continuous hardened hydrogel film. Because gelatin transitions between sol and gel states with changes in temperature, two- and three-dimensional structures could be obtained from the gel state. This bio-inspired interfacial cross-linking reaction provides a simple means of forming complex morphologies and represents a promising technique for bio-applications.

Polydopamine Films with 2D-like Layered Structure and High Mechanical Resilience

Highly oriented, layered, and mechanically resilient films of polydopamine (PDA) have been synthesized from the air/water interface. The films show a unique layered structure, as shown by scanning and transmission electron studies (SEM/TEM) and X-ray diffraction analysis (XRD), which resemble that of 2D layered materials. The films exhibit a composition typical of PDA-based materials, as evidenced by X-ray photoelectron spectroscopy (XPS); moreover, the samples present the distinctive resonance modes of PDA-based nanomaterials in Raman and infrared spectroscopy (FTIR) experiments. The presence of highly ordinated 3-4 protomolecule stacking, taking place at the air/water interface, with a unique eumelanin-like supramolecular arrangement is presented. Moreover, the films show superior mechanical resilience with E = 13 ± 4 GPa and H = 0.21 ± 0.03 GPa, as revealed by nanoindentation experiments, making them highly resilient and easily transferable. Finally, the ordering induced by the interface opens many possibilities for further studies, including those regarding the supramolecular structure on PDA due to their similarity to 2D layered materials.

Measuring the effective surface tension of a floating liquid marble using X-ray imaging

A liquid marble (LM) is a droplet coated with microparticles that isolate the liquid interior from its surroundings, making it perfectly non-wetting. This attractive feature allows the LM to perform useful tasks such as coalescence, targeted delivery, and controlled release. The non-wetting characteristic also allows the LM to float on a carrier liquid. The growing number of applications in digital microfluidics requires further insights into the fundamental properties of a LM such as its effective surface tension. Although the coating provides the LM with various desirable characteristics, its random construction presents a major obstacle to accurate optical analysis. This paper presents a novel method to measure the effective surface tension of a floating LM using X-ray imaging and curve fitting procedures. X-ray imaging reveals the true LM liquid-air interface hidden by the coating particles. Analysis of this interface showed that the effective surface tension of a LM is not significantly different from that of its liquid content. This indicates that the particle coating might not have significantly altered the behaviour of the liquid interface. We also found that our method is sensitive enough to detect the variations across individual LMs.

S/N Co-Doped Hollow Carbon Particles for Oxygen Reduction Electrocatalysts Prepared by Spontaneous Polymerization at Oil-Water Interfaces

We herein report that sulfur and nitrogen co-doped hollow spherical carbon particles can be applied to oxygen reduction reaction (ORR) electrocatalysts prepared by calcination of polydopamine (PDA) hollow particles. The hollow structure of PDA was formed by auto-oxidative interfacial polymerization of dopamine at the oil and water interface of emulsion microdroplets. The PDA was used as the nitrogen source as well as a platform for sulfur-doping. The obtained sulfur and nitrogen co-doped hollow particles showed a higher catalytic activity than that of nonsulfur-doped particles and nonhollow particles. The high ORR activity of the calcined S-doped PDA hollow particles could be attributed to the combination of nitrogen and sulfur active sites and the large surface areas owing to a hollow spherical structure.

Controlled reversible buckling of polydopamine spherical microcapsules: revealing the hidden rich phenomena of post-buckling of spherical polymeric shells

Under external pressure compression, various kinds of artificial microcapsules can undergo buckling induced deformation and catastrophic rupturing failure, which needs to be understood for their diverse practical applications. For this, many theories and numerical simulations have recently emerged, leading to some intriguing but often debatable predictions and scaling laws. However, experimental testing of these predictions is very limited, due to challenges in realizing prescribed buckling pathways and in situ monitoring of the buckling procedure. Herein, we report the buckling behaviors of well-defined spherical polydopamine (PDA) capsules with tunable sizes and homogeneous nanoscale shells. Simple but controlled solvent evaporation was implemented inside a home-made optical chamber to induce buckling of PDA capsules by following a prescribed pathway toward targeted shapes that are only dictated by the inherent material properties of the capsules. In addition, the buckling speed was slowed down to the timescale of minutes, which can prevent buckling from being trapped at some metastable intermediate states as well as facilitating in situ optical monitoring of the whole buckling procedure in slow motion. In this way, several classic buckling behaviors were clearly observed, including the sudden appearance of spinodal-like dimples above critical pressures, transition of the indentation rim from the axisymmetric to polygonal shape, and evolution of multi-indented buckling into single indented buckling following Ostwald ripening. These observations are qualitatively comparable with recent predictions from numerical results. Furthermore, some novel buckling phenomena have been reported for the first time, which might stimulate further theories and numerical simulations.

Sn-Triggered Two-Dimensional Fast Protein Assembly with Emergent Functions

The discovery of a general strategy for organizing functional proteins into stable nanostructures with the desired dimension, shape, and function is an important focus in developing protein-based self-assembled materials, but the scalable synthesis of such materials and transfer to other substrates remain great challenges. We herein tackle this issue by creating a two-dimensional metal-protein hybrid nanofilm that is flexible and cost-effective with reliable self-recovery, stability, and multifunctionality. As it differs from traditional metal ions, we discover the capability of Sn²⁺ to initiate fast amyloid-like protein assembly (occurring in seconds) by effectively reducing the disulfide bonds of native globular proteins. The Sn²⁺-initiated lysozyme aggregation at the air/water interface leads to droplet flattening, a result never before reported in a protein system, which finally affords a multifunctional 2D Sn-doped hybrid lysozyme nanofilm with an ultralarge area (e.g., 0.2 m²) within a few minutes. The hybrid film is distinctive in its ease of coating on versatile material surfaces with endurable chemical and mechanical stability, optical transparency, and diverse end uses in antimicrobial and photo-/electrocatalytic scaffolds. Our approach provides not only insights into the effect of tin ions on macroscopic self-assembly of proteins but also a controllable and scalable synthesis of a potential biomimic framework for biomedical and biocatalytic applications.

Partial Transformation of Imogolite by Decylphosphonic Acid Yields an Interface Active Composite Material

The phosphonic acid moiety is commonly used as an anchoring group for the surface modification of imogolite. However, the impact of the reaction on its structure has never been clearly analyzed before. We study the reaction of imogolite and decylphosphonic acid by combining infrared spectroscopy, X-ray scattering, scanning electron microscopy, transmission electron microscopy, and solid-state nuclear magnetic resonance spectroscopy. Instead of a surface functionalization, we observe the formation of a lamellar phase interconnected with imogolite bundles. Although we find no evidence for grafted imogolite tubes, we observe the expected dispersion characteristics and stabilization of water in toluene emulsions described in the literature. Based on the surface chemistry of imogolite, we propose an explanation for the observed reactivity and link the structural features of the obtained composite material to its dispersibility in toluene and its observed properties at the toluene-water interface.

Comparative evaluation of the biocompatible and physical–chemical properties of poly(lactide-co-glycolide) and polydopamine as coating materials for bacterial cellulose

The aim of this study was to investigate the influence of poly(lactide-co-glycolide) (PLGA) and polydopamine (PDA) as coating materials on the tensile strength, surface performance, in vitro cell behavior and the in vivo material-tissue reaction of bacterial cellulose (BC) membranes.

Mechanically robust crystalline monolayer assemblies of oligosaccharide-based amphiphiles on water surfaces

Cellulose oligomers with a terminal alkyl group at the reducing end formed mechanically robust crystalline monolayers via self-assembly against water surfaces from aqueous solutions in air.

Flat Drops, Elastic Sheets, and Microcapsules by Interfacial Assembly of a Bacterial Biofilm Protein, BslA

Protein adsorption and assembly at interfaces provide a potentially versatile route to create useful constructs for fluid compartmentalization. In this context, we consider the interfacial assembly of a bacterial biofilm protein, BslA, at air-water and oil-water interfaces. Densely packed, high modulus monolayers form at air-water interfaces, leading to the formation of flattened sessile water drops. BslA forms elastic sheets at oil-water interfaces, leading to the production of stable monodisperse oil-in-water microcapsules. By contrast, water-in-oil microcapsules are unstable but display arrested rather than full coalescence on contact. The disparity in stability likely originates from a low areal density of BslA hydrophobic caps on the exterior surface of water-in-oil microcapsules, relative to the inverse case. In direct analogy with small molecule surfactants, the lack of stability of individual water-in-oil microcapsules is consistent with the large value of the hydrophilic-lipophilic balance (HLB number) calculated based on the BslA crystal structure. The occurrence of arrested coalescence indicates that the surface activity of BslA is similar to that of colloidal particles that produce Pickering emulsions, with the stability of partially coalesced structures ensured by interfacial jamming. Micropipette aspiration and flow in tapered capillaries experiments reveal intriguing reversible and nonreversible modes of mechanical deformation, respectively. The mechanical robustness of the microcapsules and the ability to engineer their shape and to design highly specific binding responses through protein engineering suggest that these microcapsules may be useful for biomedical applications.