Interaction of DNA with Cationic Lipid Mixtures-Investigation at Langmuir Lipid Monolayers

Bragg-Williams Theory for Particles with a Size-Modulating Internal Degree of Freedom

The field of soft matter teems with molecules and aggregates of molecules that have internal size-modulating degrees of freedom. Proteins, peptides, microgels, polymers, micelles, and even some colloids can exist in multiple-often just two dominating-states with different effective sizes, where size can refer to the volume or to the cross-sectional area for particles residing on surfaces. The size-dependence of their accessible states renders the behavior of these particles pressure-sensitive. The Bragg-Williams model is among the most simple mean-field methods to translate the presence of inter-particle interactions into an approximate phase diagram. Here, we extend the Bragg-Williams model to account for the presence of particles that are immersed in a solvent and exist in two distinct states, one occupying a smaller and the other one a larger size. The basis of the extension is a lattice-sublattice approximation that we use to host the two size-differing states. Our model includes particle-solvent interactions that act as an effective surface tension between particles and solvent and are ignorant of the state in which the particles reside. We analyze how the energetic preference of the particles for one or the other state affects the phase diagrams. The possibility of a single phase-two phases-single phase sequence of phase transitions as a function of increasing temperature is demonstrated.

DNA Penetration into a Lysozyme Layer at the Surface of Aqueous Solutions

The interactions of DNA with lysozyme in the surface layer were studied by performing infrared reflection-absorption spectroscopy (IRRAS), ellipsometry, surface tensiometry, surface dilational rheology, and atomic force microscopy (AFM). A concentrated DNA solution was injected into an aqueous subphase underneath a spread lysozyme layer. While the optical properties of the surface layer changed fast after DNA injection, the dynamic dilational surface elasticity almost did not change, thereby indicating no continuous network formation of DNA/lysozyme complexes, unlike the case of DNA interactions with a monolayer of a cationic synthetic polyelectrolyte. A relatively fast increase in optical signals after a DNA injection under a lysozyme layer indicates that DNA penetration is controlled by diffusion. At low surface pressures, the AFM images show the formation of long strands in the surface layer. Increased surface compression does not lead to the formation of a network of DNA/lysozyme aggregates as in the case of a mixed layer of DNA and synthetic polyelectrolytes, but to the appearance of some folds and ridges in the layer. The formation of more disordered aggregates is presumably a consequence of weaker interactions of lysozyme with duplex DNA and the stabilization, at the same time, of loops of unpaired nucleotides at high local lysozyme concentrations in the surface layer.

Unsaturated lipids modulating the interaction of the antileishmanial isolinderanolide E with models of cellular membranes

The present work evaluated the antiprotozoal activity of isolinderanolide E, isolated from the Brazilian plant Nectandra oppositifolia, against promastigote forms of Leishmania (Leishmania) amazonensis. The compound exhibited an EC₅₀ value of 20.3 μM, similar to the positive control miltefosine (IC₅₀ of 19.4 μM), and reduced toxicity to macrophages (CC₅₀ > 200 μM). Based on these results, Langmuir monolayers of two unsaturated lipids: 1,2-dioleoyl-sn-glycero-3-phosphocholine (DOPC) and 1,2-dioleoyl-sn-glycero-3-phosphoethanolamine (DOPE), were employed as a model of mammalian and parasite membranes, respectively, to study the interaction of isolinderanolide E at a molecular level. The films were characterized with tensiometry (surface pressure-area isotherms and surface pressure-time curves), infrared spectroscopy, and Brewster angle microscopy (BAM). This compound changed the profile of the isotherms leading to fluid DOPC and DOPE monolayers, which were not able to attain rigid states even with compression. Infrared spectroscopy showed that the bioactive compound decreases the trans/gauche ratio conformers related to the molecular conformational disorder. BAM showed the formation of specific aggregates upon drug incorporation. In conclusion, isolinderanolide E changes the thermodynamic, mechanical, structural, and morphological characteristics of the monolayer of these unsaturated lipids, which may be essential to understand the action at the molecular level bioactives in biointerfaces.

DNA Interaction with a Polyelectrolyte Monolayer at Solution-Air Interface

The formation of ordered 2D nanostructures of double stranded DNA molecules at various interfaces attracts more and more focus in medical and engineering research, but the underlying intermolecular interactions still require elucidation. Recently, it has been revealed that mixtures of DNA with a series of hydrophobic cationic polyelectrolytes including poly(N,N-diallyl-N-hexyl-N-methylammonium) chloride (PDAHMAC) form a network of ribbonlike or threadlike aggregates at the solution-air interface. In the present work, we adopt a novel approach to confine the same polyelectrolyte at the solution-air interface by spreading it on a subphase with elevated ionic strength. A suite of techniques-rheology, microscopy, ellipsometry, and spectroscopy-are applied to gain insight into main steps of the adsorption layer formation, which results in non-monotonic kinetic dependencies of various surface properties. A long induction period of the kinetic dependencies after DNA is exposed to the surface film results only if the initial surface pressure corresponds to a quasiplateau region of the compression isotherm of a PDAHMAC monolayer. Despite the different aggregation mechanisms, the micromorphology of the mixed PDAHMAC/DNA does not depend noticeably on the initial surface pressure. The results provide new perspective on nanostructure formation involving nucleic acids building blocks.

Incorporation of Molecular Reorientation into Modeling Surface Pressure-Area Isotherms of Langmuir Monolayers

Langmuir monolayers can be assembled from molecules that change from a low-energy orientation occupying a large cross-sectional area to a high-energy orientation of small cross-sectional area as the lateral pressure grows. Examples include cyclosporin A, amphotericin B, nystatin, certain alpha-helical peptides, cholesterol oxydation products, dumbbell-shaped amphiphiles, organic-inorganic nanoparticles and hybrid molecular films. The transition between the two orientations leads to a shoulder in the surface pressure-area isotherm. We propose a theoretical model that describes the shoulder and can be used to extract the energy cost per molecule for the reorientation. Our two-state model is based on a lattice-sublattice approximation that hosts the two orientations and a corresponding free energy expression which we minimize with respect to the orientational distribution. Inter-molecular interactions other than steric repulsion are ignored. We provide an analysis of the model, including an analytic solution for one specific lateral pressure near a point of inflection in the surface pressure-area isotherm, and an approximate solution for the entire range of the lateral pressures. We also use our model to estimate energy costs associated with orientational transitions from previously reported experimental surface pressure-area isotherms.

Kelvin probe force microscopy to study electrostatic interactions of DNA with lipid-gemini surfactant monolayers for gene delivery

In novel gene therapy mechanisms utilising gemini surfactants, electrostatic interactions of the surfactant molecules with the DNA strands is a primary mechanism by which the two components of the delivery vehicle bind. In this work, we show for the first time direct evidence of electrostatic interactions of these compounds visualised with Kelvin probe force microscopy (KPFM) and correlated to their topography from atomic force microscopy (AFM). We construct monolayers of lipids and gemini surfactant to simulate interactions on a cellular level, using lipids commonly found in cell membranes, and allow DNA to bind to the monolayer as it is formed on a Langmuir-Blodgett trough. The difference in topography and electrical surface potential between monolayers with and without DNA is striking. In fact, KPFM reveals a strongly positive relative electrical surface potential in between where we identify a background lipid and the DNA strands, evidenced by the height profiles of the domains. Such identification is not possible without KPFM. We conclude that it is likely we are seeing cationic surfactant molecules surrounding DNA strands within a sea of background lipid.

An Imidazolium-Based Lipid Analogue as a Gene Transfer Agent

A dicationic imidazolium salt is described and investigated towards its application for gene transfer. The polar head group and the long alkyl chains in the backbone contribute to a lipid-like behavior, while an alkyl ammonium group provides the ability for crucial electrostatic interaction for the transfection process. Detailed biophysical studies regarding its impact on biological membrane models and the propensity of vesicle fusion are presented. Fluorescence spectroscopy, atomic force microscopy and confocal fluorescence microscopy show that the imidazolium salt leads to negligible changes in lipid packing, while displaying distinct vesicle fusion properties. Cell culture experiments reveal that mixed liposomes containing the novel imidazolium salt can serve as plasmid DNA delivery vehicles. In contrast, a structurally similar imidazolium salt without a second positive charge showed no ability to support DNA transfection into cultured cells. Thus, we introduce a novel and variable structural motif for cationic lipids, expanding the field of lipofection agents.

Modulation of membrane properties by DNA in liposomes: A spectroscopic study

Liposome mediated DNA transport possesses a number of preventing diseases in clinical trials, thus, the study of interaction between DNA and liposomes has become a hot research direction. In this paper, the adsorption behavior of DNA onto two representative lipids had been studied by the fluorescence spectrum measurement, Ultraviolet absorption spectrum and Langmuir-Blodgett technology. The results of fluorescence spectrum measurement indicated that the fluorescence liposomes were quenched statically by DNA at all three temperatures. Thermodynamic analysis displayed that the intermolecular forces between DNA and liposomes were van der Waals forces and Hydrogen bonding. The experimental results of Ultraviolet absorption spectrum and Langmuir-Blodgett technology further verified these mechanisms. This work provides useful theoretical basis for the development of novel DNA delivery materials.

Network Formation of DNA/Polyelectrolyte Fibrous Aggregates Adsorbed at the Water-Air Interface

It is discovered that complexes of DNA and hydrophobically modified polyelectrolytes form a rigid network of threadlike or fibrous aggregates at the liquid-gas interface whose morphology can dramatically affect the mechanical properties. While mixed solutions of DNA and poly(N,N-diallyl-N,N-dimethylammonium chloride) (PDADMAC) exhibit no notable surface activity, the complexes formed from DNA with poly(N,N-diallyl-N-butyl-N-methylammonium chloride) are surface-active, in contrast to either of the separate components. Further, complexes of DNA and poly(N,N-diallyl-N-hexyl-N-methylammonium chloride) (PDAHMAC) with its longer hydrophobic side chains exhibit pronounced surface activity with values of surface pressures up to 16 mN/m and dynamic surface elasticity up to 58 mN/m. If the PDAHMAC nitrogen to DNA phosphate molar ratio, N/P, is between 0.6 and 3, abrupt compression of the adsorption layer leads unexpectedly to a noticeable decrease of the surface elasticity. The application of imaging techniques reveals that this effect is a consequence of the destruction of a rigid network of threadlike DNA/polyelectrolyte aggregates at the interface. The toroidal aggregates, which are typical for the bulk phase of DNA/PDADMAC solutions in this range of N/P ratios, are not observed in the surface layer. The observed link between the mechanical properties and interfacial morphology of surface-active complexes formed from DNA with hydrophobically modified polyelectrolytes indicates that tuning polyelectrolyte hydrophobicity in these systems may be a means to develop their use in applications ranging from nonviral gene-delivery vehicles to conductive nanowires.

DNA Delivery Systems Based on Peptide-Mimicking Cationic Lipids-The Effect of the Co-Lipid on the Structure and DNA Binding Capacity

In continuation of previous work, we present a new promising DNA carrier, OO4, a highly effective peptide-mimicking lysine-based cationic lipid. The structural characteristics of the polynucleotide carrier system OO4 mixed with the commonly used co-lipid DOPE and the saturated phospholipid DPPE have been studied in two-dimensional and three-dimensional model systems to understand their influence on the physical-chemical properties. The phase behavior of pure OO4 and its mixtures with DOPE and DPPE was studied at the air-water interface using a Langmuir film balance combined with infrared reflection-absorption spectroscopy. In bulk, the self-assembling structures in the presence and absence of DNA were determined by small-angle and wide-angle X-ray scattering. The amount of adsorbed DNA to cationic lipid bilayers was measured using a quartz crystal microbalance. The choice of the co-lipid has an enormous influence on the structure and capability of binding DNA. DOPE promotes the formation of nonlamellar lipoplexes (cubic and hexagonal structures), whereas DPPE promotes the formation of lamellar lipoplexes. The correlation of the observed structures with the transfection efficiency and serum stability indicates that OO4/DOPE 1:3 lipoplexes with a DNA-containing cubic phase encapsulated in multilamellar structures seem to be most promising.

Adsorption behavior of DNA on phosphatidylcholine at the air-water interface

In this paper, the adsorption behavior of DNA on 1,2-dipalmitoyl-sn-glycero-3- phosphocholine (DPPC) and 1-palmitoyl-2-oleoyl-sn-glycero-3-phosphocholine (POPC) mixed lipid monolayers had been studied at the air-water interface through the surface pressure-area curves (π-A), adsorption curves (π/π₀-t), excess mean area (∆A_exc), excess Gibbs free energy (∆G_ex) and the atomic force microscopy (AFM). π-A isotherms showed that the curves moved to larger mean molecular area after DNA added into subphase, however, the curves shifted to smaller mean molecular area when the concentration of DNA was higher than 1.2 μg/mL. The result of adsorption curves indicated that DNA molecules were spread by combining with polar head groups of lipids except the concentration of DNA was 0.4 μg/mL. ∆A_exc and ∆G_ex demonstrated that DNA enlarged the interval between DPPC and POPC, and the strongest position happened at the concentration of DNA was 1.2 μg/mL. These phenomena might be the steric hindrance between DNA molecules. Morphology of surface observed by AFM was agreement with the results above, which verified our conclusion from a more intuitive aspect. This work provides useful theoretical basis for the development of novel DNA delivery materials.

Interaction of DNA with likely-charged lipid monolayers: An experimental study

Anionic lipids are increasingly being used in lipoplexes for synthetic gene vectors as an alternative to cationic lipids. This is primarily due to their lower toxicity, which makes them biocompatible and adaptable to be tissue specific. However, anionic lipoplexes require the presence of multivalent cations to promote the electrostatic attraction between DNA and anionic lipid mono- and bilayers. In this work we provide for the first time experimental results of the adsorption of linear DNA onto anionic/zwitterionic lipid monolayers without any addition of cations. This is demonstrated experimentally by means of Langmuir monolayers of DOPE/DOPG (1:1) lipids spread on a water subphase that contains calf thymus DNA. The adsorption of DNA onto anionic/zwitterionic lipid monolayers is discussed in terms of the surface pressure-molecular area isotherms recorded in the absence and in the presence of different electrolytes. Measurements of the surface potential provide additional evidence of the different interaction of DNA anionic/zwitterionic lipid monolayers depending on the presence and nature of electrolyte. These experimental results are further analysed in terms of the overall dipole moment normal to the monolayers providing new insight into the behaviour of anionic lipoplexes and the role of zwitterionic lipids.