Visible Light-Controlled Inversion of Pickering Emulsions Stabilized by Functional Silica Microspheres

Physicochemical properties and antibacterial property of pickering emulsion stabilized by smart Janus nanospheres

In this study, responsive Janus nanospheres were prepared by grafting LMA and DMAEMA monomers on both sides of SiO2 nanospheres using the Pickering emulsion stencil method and RAFT polymerization. The successful synthesis was verified through infrared spectroscopy (FTIR) and thermogravimetric analysis (TGA), scanning electron microscopy (SEM) characterizations. Subsequently, Pickering emulsion was formulated using Janus nanospheres as emulsifiers. The particle size of the emulsion droplets was systematically investigated by manipulating factors such as pH, nanosphere dosage, water to oil ratio, and oil phase polarity. Notably, the Pickering emulsion exhibited responsive properties to pH, temperature, and CO2. Furthermore, Janus nanospheres exhibited excellent emulsification property for real oil phases, including canola oil, kerosene, gasoline, and diesel oil. Building upon this, a smart antibacterial Pickering emulsion was developed using Janus nanospheres, and its inhibition rate against E. coli could reach 100% within 4 h, which would be beneficial for its application in the food field.

Reversible Emulsions from Polyoxometalate-Polymer: A Robust Strategy to Cyclic Emulsion Catalysis and High-Internal-Phase Emulsion Materials

Reversible Pickering emulsions, achieved by switchable, interfacially active colloidal particles, that enable on-demand emulsification/demulsification or phase inversion, hold substantial promise for biphasic catalysis, emulsion polymerization, cutting fluids, and crude oil pipeline transportation. However, particles with such a responsive behavior usually require complex chemical syntheses and surface modifications, limiting their extensive use. Herein, we report a simple route to generate emulsions that can be controlled and reversibly undergo phase inversion. The emulsions are prepared and stabilized by the interfacial assembly of polyoxometalate (POM)-polymer, where their electrostatic interaction at the interface is dynamic. The wettability of the POMs that dictates the emulsion type can be readily regulated by tuning the number of polymer chains bound to POMs, which, in turn, can be controlled by varying the concentrations of both components and the water/oil ratio. In addition, the number of polymer chains anchored to the POMs can be varied by controlling the number of negative charges on the POMs through an in situ redox reaction. As such, a reversible inversion of the emulsions can be triggered by switching between exposure to ultraviolet light and the introduction of oxygen. Combining the functions of POM itself, a cyclic interfacial catalysis system was realized. Inversion of the emulsion also affords a pathway to high-internal-phase emulsions. The diversity of the POMs, the polymers, and the responsive switching groups open numerous new, simple strategies for designing a wide range of responsive soft matter for cargo loading, controlled release, and delivery in biomedical and engineering applications without time-consuming particle syntheses.

CO2-Triggered Hierarchical-Pore UiO-66-Based Pickering Emulsions for Efficient and Recyclable Suzuki-Miyaura Cross-Coupling in Biphasic Systems

Hierarchical-pore metal-organic frameworks (H-MOFs) are considered to be emerging stabilizers for Pickering emulsion formation because of their hierarchically arranged pores, tailorable structures, and ultrahigh surface areas. However, stimulus-triggered Pickering emulsions built by H-MOFs have been seldom presented to date despite their great significance in diverse applications. Herein, by grafting Pd(OAc)2 on the hierarchical-pore zirconium MOF UiO-66, namely, H-UiO-66, with the aid of 1-alkyl-3-methylimidazolium 2-cyanopyrrolide salts ([CnMIM][2-CN-Pyr], n = 4, 6, and 8), a series of Pd(OAc)2-[CnMIM][2-CN-Pyr]@H-UiO-66 have been developed and utilized as emulsifiers for constructing CO2-switching Pickering emulsions. It was found that Pd(OAc)2-[CnMIM][2-CN-Pyr]@H-UiO-66 was able to stabilize the n-hexane-water mixture to form a Pickering emulsion even at an amount of 0.5 wt %. Upon alternate addition of CO2 and N2 at normal pressure, Pickering emulsions could be smartly converted between demulsification and re-emulsification. Through combining varieties of spectroscopic techniques, the mechanism of the switchable phase transformation lay in the acid-base reaction of ionic liquids with CO2 on H-UiO-66 and the creation of more hydrophilic salts, which reduced the wettability of the emulsifier and destabilized the emulsion. As an example of application, the stimulus-triggered Pickering emulsion was employed as a palladium-catalyzed Suzuki-Miyaura cross-coupling microreactor to achieve the combination of chemical reactions, isolation of products, and recovery of catalysts.

Light-responsive Pickering emulsions based on azobenzene-modified particles

Light-responsive particle-stabilised (Pickering) emulsions can in principle be selectively emulsified/demulsified on-demand through the remote application of light. However, despite their wide-ranging potential in applications such as drug delivery and biphasic catalysis, their rational design is extremely challenging and there are very few examples to date. Herein, we investigate a model system based on silica particles functionalised with azobenzene photoswitches to understand the key factors that determine the characteristics of light-responsive Pickering emulsions. The particle hydrophobicity is tuned through judicious variation of the spacer length used to graft the chromophores to the surface, the grafting density, and irradiation to induce trans-cis photoisomerisation. For select emulsions, and for the first time, a reversible transition between emulsified water-in-oil droplets and demulsified water and oil phases is observed with the application of either UV or blue light, which can be repeatedly cycled. A combination of surface energy analysis and optical microscopy is shown to be useful in predicting the stability, and expected light-response, of a given emulsion. Using the observed trends, a set of design rules are presented which will help facilitate the rational design, and therefore, more widespread application of light-responsive Pickering emulsions.

Recent Progress toward Physical Stimuli-Responsive Emulsions

Emulsion as a fine dispersion of immiscible liquids has involved widespread applications in industry, pharmaceuticals, agriculture and personal care. Stimuli-responsive emulsions capable of on-demand demulsification or changing their properties are required in many cases such as controllable release cargo, oil recovery, emulsifiers recycle and product separation, great progress has been achieved in these areas. Among these various triggers, much effort has been made to develop physical stimuli, due to the noninvasive and environmentally friendly characteristics. Physical stimuli-responsive emulsions provide a plenty of valuable practical applications in the fields of sustainable industry, biomedical reaction, drug delivery. Here, we summarize the recent development in the field of emulsions in response to physical stimuli consisting of temperature, light, magnetic field, electrical field, etc. The preparation methods and mechanisms of physical stimuli-responsive emulsions and their applications of catalysis reaction, drug delivery, and oil recovery are highlighted in this review. The future directions and outstanding problems of the physical stimuli-responsive emulsions are also discussed. This article is protected by copyright. All rights reserved.

A Visible Light/Heat Responsive Covalent Organic Framework for Highly Efficient and Switchable Proton Conductivity

In recent years, covalent organic frameworks (COFs) have attracted enormous interest as a new generation of proton-exchange membranes, chemical sensors and electronic devices. However, to design high proton conductivity COFs,...

Cellulose nanocrystals concentration and oil-water ratio for solid-liquid controllable emulsion polymerization

Stabilities of cellulose Pickering emulsions are of great importance to utilize them effectively, but influenced by their complex compositions, such as, colloidal particles, oil phases and water phases. In this work, solid-liquid controllable polymerization products could obtain by adjusting cellulose nanocrystals (CNCs) concentration and vinyl acetate (VAc)-water ratio. The emulsions in zone Ӏ (w/o) and II (o/w) of the three-phase diagram were selected for researching. The polymerization emulsions in zone II illustrated the o/w ratio played a more important role than CNCs concentration in the storage stability and practicality of the polymerized emulsion; The polymer in zone Ӏ showed a large number of porous structures. This is an innovative method that different forms of target products are obtained through the guidance of three-phase diagram, which not only broadens the application field, but also applies to other Pickering emulsion systems.

pH-Responsive Behavior of Pickering Emulsions Stabilized by a Selenium-Containing Surfactant and Alumina Nanoparticles

Herein, we describe pH-responsive Pickering emulsions stabilized by a sodium carboxylate-derived selenium surfactant (C₁₀-Se-C₁₀·(COONa)₂) in combination with positively charged alumina nanoparticles. Unlike other bola-type carboxylate surfactants (e.g., disodium eicosanoate), C₁₀-Se-C₁₀·(COONa)₂ is soluble in water with a low Krafft temperature (36.1 °C). The emulsions are sensitive to pH variations, and efficient demulsification can be achieved by a pH trigger. The carboxylic sodium group in the C₁₀-Se-C₁₀·(COONa)₂ structure can be reversibly cycled between its anionic and nonionic states (carboxylic acid), resulting in a pH-controlled electrostatic attraction between the surfactant and alumina. The Pickering emulsion can be reversibly switched between "on" (stable) and "off" (unstable) states by pH at least four times. Compared with the emulsions stabilized by specially synthesized stimuli-responsive particles or surfactants, the method reported here is much easier to implement and requires very low concentrations of the surfactant and nanoparticles, with potential applications in the fields of biomedicine, drug delivery, and cosmetics.

Influence of Polarity Change and Photophysical Effects on Photosurfactant-Driven Wetting

Photosurfactants have shown considerable promise for enabling stimuli-responsive control of the properties and motion of fluid interfaces. Recently, a number of photoswitch chemistries have emerged to tailor the photoresponsive properties of photosurfactants. However, systematic studies investigating how photoresponsive surfactant behavior depends on the photochemical and photophysical properties of the switch remain scarce. In this work, we develop synthetic schemes and surfactant designs to produce a well-controlled library of photosurfactants to comparatively assess the behavior of photoswitch chemistry on interfacial behavior. We employ photoinduced spreading of droplets at fluid interfaces as a model for such studies. We show that although photosurfactant response is largely guided by expected trends with changes in polarity of the photoswitch, interfacial behavior also depends nontrivially and sometimes counter-intuitively on the kinetics and mechanisms of photoswitching, particularly at the interface of two solvents, as well as on complex interactions with other surfactants. Understanding these complexities enables the design of new photosurfactant systems and their optimization toward responsive functions including triggered spreading, dewetting, and destabilization of droplets on solid and fluid surfaces.

Nano-3D-Printed Photochromic Micro-Objects

Molecular photoswitches that can reversibly change color upon irradiation are promising materials for applications in molecular actuation and photoresponsive materials. However, the fabrication of photochromic devices is limited to conventional approaches such as mold casting and spin-coating, which cannot fabricate complex structures. Reported here is the first photoresist for direct laser writing of photochromic 3D micro-objects via two-photon polymerization. The integration of photochromism into thiol-ene photo-clickable resins enables rapid two-photon laser processing of highly complex microstructures and facile postmodification using a series of donor-acceptor Stenhouse adduct (DASA) photoswitches with different excitation wavelengths. The versatility of thiol-ene photo-click reactions allows fine-tuning of the network structure and physical properties as well as the type and concentration of DASA. When exposed to visible light, these microstructures exhibit excellent photoresponsiveness and undergo reversible color-changing via photoisomerization. It is demonstrated that the fluorescence variations of DASAs can be used as a reporter of photoswitching and thermal recovery, allowing the reading of DASA-containing sub-micrometric structures in 3D. This work delivers a new approach for custom microfabrication of 3D photochromic objects with molecularly engineered color and responsiveness.

Designing of Rewritable Paper by Hydrochromic Donor-Acceptor Stenhouse Adducts

Rewritable paper is meaningful to the recyclable and sustainable utilization of environmental resources and thus has been extensively investigated for several decades. In this work, we demonstrated an efficient and convenient strategy to fabricate rewritable paper based on reversible hydrochromism of donor-acceptor Stenhouse adducts (DASAs). The kinetics and efficiency of isomerization could be well-controlled by adjusting the surrounding temperature and humidity. Monocolored rewritable paper was prepared by coating cyclic DASA·xH₂O on the paper surface. Writing, printing, stamping and patterning were realized on the rewritable paper. The information could be controllably erased by treatment in a humid atmosphere. More importantly, the rewritable paper was upgraded to multicolored by combination of two DASA materials. The color of chirography was switched by controlling the writing speed.

Ambient CO2/N2 Switchable Pickering Emulsion Emulsified by TETA-Functionalized Metal-Organic Frameworks

In recent years, metal-organic frameworks (MOFs) have been explored as emulsifiers for the fabrication of Pickering emulsions and then used for hybrid material synthesis and interface catalysis. Nevertheless, stimuli-responsive Pickering emulsions stabilized by MOFs have been rarely reported so far, although they are of great importance for fundamental research studies and practical applications. Herein, for the first time, triethylenetetramine (TETA)-functionalized MOFs (ZIF-90/TETA) have been designed, synthesized, and used for fabricating CO₂-/N₂-response Pickering emulsions. It is shown that even at the ZIF-90/TETA content of 0.25 wt %, the functional MOF can still efficiently emulsify n-hexane and water to form a high internal phase Pickering emulsion. Importantly, the Pickering emulsion can be easily and reversibly switched between emulsification and demulsification by bubbling of CO₂ and N₂ alternatively at atmospheric pressure. The possible mechanism of the CO₂/N₂ switchable emulsion is investigated by zeta potential, water contact angle, interfacial tension, ¹³C NMR spectroscopy, and an optical microscope. It is found that the acid-base reaction of CO₂ with TETA anchored on the surface of ZIF-90 leads to the production of hydrophilic ammonium bicarbonate and carbamate, which results in the emulsification of the Pickering emulsion. However, when N₂ is bubbled to remove CO₂, the reverse reaction takes place to cause the demulsification of the Pickering emulsion. Moreover, the CO₂/N₂ switchable Pickering emulsion has been successfully used as a microreactor for Knoevenagel reactions to demonstrate a highly efficient integration of chemical reaction, product separation, and ZIF-90/TETA recycling for a sustainable chemical process.

pH-Responsive Pickering emulsion stabilized by polymer-coated silica nanoaggregates and applied to recyclable interfacial catalysis

We first synthesized a diblock copolymer poly[tert-butyl methacrylate]-b-poly[3-(trimethoxysilyl)propyl methacrylate] (PtBMA-b-PTMSPMA) through reversible addition–fragmentation chain transfer (RAFT) living radical polymerization and grafted it onto fumed silica by converting the PTMSPMA segment to silanol and the PtBMA segment to polymethylacrylic acid (PMAA) in the presence of trifluoroacetic acid in order to obtain PMAA brush-coated silica nanoaggregates P-Si. TEM, DLS, FTIR, and TGA results confirmed the successful modification of the starting materials. The nanoaggregates flocculated and stabilized a toluene-in-water Pickering emulsion at low pH, while the nanoaggregates were well dispersed in water and broke the emulsion under both neutral and basic conditions. Alternatively, the addition of acid/base induced emulsification/demulsification cycles that were sustained for several cycles. Moreover, when the P-Si was mixed with Rh-loaded silica, Rh-Si, the mixture had the same pH-responsive Pickering emulsion behavior as the single P-Si. This Pickering emulsion system can be used in the biphasic interfacial catalytic hydrogenation of olefins and had excellent yields under a hydrogen atmosphere. The yield of Pickering emulsion catalysis rapidly reached more than 99% in 3 h, while that of the demulsified mixture failed to reach 20% in 4 h, which verified the promotion of catalysis by the Pickering emulsion. Base-induced demulsification can be used to separate the products and recycle the catalyst. This pH-responsive Pickering emulsion catalytic system was capable of several cycles of reuse, and there was no significant decrease in catalytic efficiency even after eight cycles.

We synthesized a diblock copolymer and grafted it onto fumed silica in the presence of trifluoroacetic acid to obtain a pH-responsive Pickering emulsion system stabilized by polymer-coated nanoaggregates, P-Si.

Multistimuli-Responsive Pickering Emulsion Stabilized by Se-Containing Surfactant-Modified Chitosan

Particle-stabilized emulsions that can respond to external stimuli have attracted significant concerns due to their intelligent-controlled stability, whereas particle-stabilized Pickering emulsions responding to multistimuli but based on biomass have been rarely reported. Here, a multistimuli-responsive Pickering emulsion was developed using the modified chitosan as stabilizer. Due to electrostatic attraction, Se-containing anionic surfactant, sodium 11-(butylselenyl)undecylsulfate (C₄SeC₁₁S), can bind with CS at an acidic pH and form CS-C₄SeC₁₁S complexes which can further self-associate to form micrometer-sized particles with the character of partially hydrophobicity. Therefore, at pH < pK_a, an oil-in-water Pickering emulsion can be formed using CS-C₄SeC₁₁S particles as stabilizers and can spontaneously respond to redox, ion, and pH. First, with the addition of oxidation, the hydrophilicity of C₄SeC₁₁S was enhanced, and thus, hydrophobic association of CS-C₄SeC₁₁S decreased, leading to the disruption of CS-C₄SeC₁₁S particles. Hence, the emulsion destabilized. The demulsification process is closely related with the dosage of oxidant and the oxidation time. Second, introduction of a competitive ion (e.g., CTAB) could break the binding between C₄SeC₁₁S and CS, leading to the disruption of particle emulsifier. Thereby, demulsification occurred. Third, with sequentially increasing/decreasing pH, the emulsion can be switched from stable to unstable and then to stable again accordingly. Such a unique pH-responsive behavior has never been discovered in other pH-responsive Pickering emulsions. All of the stimuli-responsive behaviors were reversible. Upon alternately adding oxidant/reductant, CTAB/C₄SeC₁₁S, or base/acid, the current emulsion can be reversibly switched off (destabilization) and on (stabilization). Such a Pickering emulsion may be a good candidate as a vehicle of functional ingredient.

Comparison of the detection performance of two different one-step-combined test strips with fluorescent microspheres or colored microspheres as tracers for influenza A and B viruses

Background

Influenza A and B viruses mainly cause respiratory infectious disease. Till now, few tests are able to simultaneously detect both, especially in primary medical establishments.

Methods

This study was designed to compare the performance of two different one-step-combined test strips for the detection of influenza A and B: one strip with fluorescent microspheres for tracers (FMT); and the other strip with colored microspheres for tracers (CMT). To test the strips, cultures of influenza A, B, and other pathogenic viruses were used, in addition to 1085 clinical specimens from symptomatic patients with respiratory infections. Real-time RT-PCR was also considered as a reference method used to detect the different results of FMT and CTM.

Results

Detection thresholds for influenza A and B cultures using serial dilutions revealed that the sensitivity of FMT was higher than that of CMT (both P < 0.05). With the culture mixtures of Coxsackie virus (A16), enteric cytopathic human orphan virus (ECHO type30), enterovirus (EV71), rotavirus (LLR strain), and enteric adenovirus (AdV 41), specificity assessment demonstrated that there was no cross reaction during the usage of the two test strips as shown by the results which were negative. In the detection of influenza A in 1085 clinical specimens, the total coincidence rate was 96.7%, the positive coincidence rate was 97.1%, and the negative coincidence rate was 96.7%. In the case of influenza B detection, the total coincidence rate was 99.1%, the positive coincidence rate was 92.6%, and the negative coincidence rate was 98.5%. In addition, with influenza A or B real-time RT-PCR detection method, the results showed that, for influenza A, 26 of the 33 specimens that negative with CMT but positive with FMT, showed positive results, and none of the 3 specimens that positive with CMT but negative with FMT showed a positive result; For influenza B, 12 of the 15 specimens that negative with CMT but positive with FMT, showed positive results, and none of the 5 specimens that positive with CMT but negative with FMT showed a positive result.

Conclusions

FMT performed better than CMT in the combined detection of influenza A and B viruses.

Stabilization of Pickering Emulsions by Hairy Nanoparticles Bearing Polyanions

Pickering emulsions are increasingly applied in drug delivery, oil-water separation, composite materials preparation, and other fields. However, systematic studies on the stabilization of Pickering emulsions to satisfy the growing application demands in multiple fields with long-term conservation are rare. Compared to conventional solid nanoparticles, polyanion-modified hairy nanoparticles are more stable in practical environments and are investigated in this study. Poly (sodium p-styrenesulfonate) was grafted to a polystyrene (PS) core via a photoemulsion polymerization. A hairy nanoparticle bearing polyanions called poly (sodium p-styrenesulfonate) brush (PS@PSS) was synthesized. The size and uniformity of the Pickering emulsions stabilized by PS@PSS were investigated via a polarizing microscope. The stability of Pickering emulsions were optimized by adjusting critical factors like ultrasonic power and time, standing time, oil phases, salt concentration, and water:oil ratio. Results indicated that the Pickering emulsions could be stabilized by PS@PSS nanoparticles, which showed remarkable and adjustable partial wetting properties. It was found that the optimized conditions were ultrasonic power of 150 W, ultrasonic time of 3 min, salt concentration of 0.1 mM, oil phase of hexadecane, and water:oil ratio of 1:1. The formation and stability of Pickering emulsion are closely related to the hairy poly (sodium p-styrenesulfonate) brush layer on the nanoparticle surface.

Redox-Responsive Pickering Emulsions Based on Silica Nanoparticles and Electrochemical Active Fluorescent Molecules

In this paper, we report a novel redox-responsive water-in-oil Pickering emulsion stabilized by negatively charged silica nanoparticles in combination with a trace amount of redox switchable fluorescent molecule ferrocene azine (FcA), in which ferrocene serves as a redox-sensitive group and anthryl unit serves as a fluorescence emission center. By alternately adding oxidants and reducing agents at a moderate condition, the amphiphilicity of silica nanoparticles changes because of the adsorption of Fc⁺A and the desorption of FcA on the silica surface. On the one hand, the stability of emulsions can be transformed between stable and unstable at ambient temperature via redox trigger and the regulation process can be cycled at least three times. On the other hand, the fluorescent intensity of the FcA molecule can be regulated by redox stimuli; thus, the change in fluorescent behavior of the emulsion droplets is observed upon redox cycles, which makes it useful in the fluorescent label of stimuli-responsive Pickering emulsions. This work provides a deep understanding of the regulation mechanism of Pickering emulsions upon redox stimuli and opens the new way for in situ fluorescent label of stimulus-responsive Pickering emulsions without introducing additional fluorescent molecules.

Interfacial self-assembly of gold nanoparticle-polymer nanoconjugates into microcapsules with near-infrared light modulated biphasic catalysis efficiency

Gold nanoparticle-based microcapsules based on the interfacial assembly significantly enhanced the biphasic catalytic reaction rate upon near-infrared light irradiation.

Bioinspired Dual-Enzyme Colloidosome Reactors for High-Performance Biphasic Catalysis

In this paper, a novel method for the construction of colloidosomes as a microreactor for dual-enzyme cascade biphasic reaction has been reported. A lipase-glucose oxidase (GOx) enzyme pair is employed in this system. A water-soluble enzyme GOx is compartmentalized inside the colloidosomes. A hydrophobic environment-favored enzyme Candida Antarctica lipase B (CalB) is adsorbed on the outer surfaces of the colloidosomes. The catalysis system is set up by introducing these dual-enzyme-immobilized microcapsules into acetic ether. H₂O₂ is produced in the aqueous phase by the doped GOx, and then H₂O₂ diffused out of the microcapsules is utilized by CalB to catalyze the oxidation of ethyl acetate. Finally, the formed peracids oxidized N-heteroaromatic in situ. Furthermore, no obvious yield decline is observed in four reaction cycles. Thus, our work provides a new strategy for the design of high-performance biomimicking reactors for multiple enzyme cascade reactions and further expands the potential application area of colloidosomes.