Instability of Emulsions Made with Surfactant-Oil-Water Systems at Optimum Formulation with Ultralow Interfacial Tension

The application of cyclodextrins in drug solubilization and stabilization of nanoparticles for drug delivery and biomedical applications

Nanoparticles (NPs) have gained significant attention in recent years due to their potential applications in pharmaceutical formulations, drug delivery systems, and various biomedical fields. The versatility of colloidal NPs, including their ability to be tailored with various components and synthesis methods, enables drug delivery systems to achieve controlled release patterns, improved solubility, and increased bioavailability. The review discusses various types of NPs, such as nanocrystals, lipid-based NPs, and inorganic NPs (i.e., gold, silver, magnetic NPs), each offering unique advantages for drug delivery. Despite the promising potential of NPs, challenges such as physical instability and the need for surface stabilization remain. Strategies to overcome these challenges include the use of surfactants, polymers, and cyclodextrins (CDs). This review highlights the role of CDs in stabilizing colloidal NPs and enhancing drug solubility. The combination of CDs with NPs presents a synergistic approach that enhances drug delivery and broadens the range of biomedical applications. Additionally, the potential of CDs to enhance the stability and therapeutic efficacy of colloidal NPs, making them promising candidates for advanced drug delivery systems, is comprehensively reviewed.

Analyzing Emulsion Dynamics via Direct Visualization and Statistical Methodologies

Analytical centrifugation is a powerful technique that leverages the principles of centrifugal force and optical detection to characterize emulsion droplets in a label-free and high-throughput manner. Other advantages include minimal sample preparation effort and compatibility with a wide range of emulsion formulations. However, the resulting data can be rather complex and, thus, difficult to fully understand and interpret. To tackle this, we developed two analytical methodologies that enable an easy and intuitive understanding of the data as well as an objective, quantitative analysis and validated them using six model emulsions employing different surfactants. Through their application, insights with unprecedented clarity into dynamic emulsion behavior, stability mechanisms, and emulsion-based processes can be gained, facilitating advancements in fields such as food science, pharmaceuticals, and materials engineering.

Natural Amino Acid-Bearing Carbamate Prodrugs of Daidzein Increase Water Solubility and Improve Phase II Metabolic Stability for Enhanced Oral Bioavailability

Daidzein (DAN) is an isoflavone, and it is often found in its natural form in soybean and food supplements. DAN has poor bioavailability owing to its extremely low water solubility and first-pass metabolism. Herein, we hypothesized that a bioactivatable natural amino acid-bearing carbamate prodrug strategy could increase the water solubility and metabolic stability of DAN. To test our hypothesis, nine amino acid prodrugs of DAN were designed and synthesized. Compared with DAN, the optimal prodrug (daidzein-4'-O-CO-N-isoleucine, D-4'-I) demonstrated enhanced water solubility and improved phase II metabolic stability and activation to DAN in plasma. In addition, unlike the passive transport of DAN, D-4'-I maintained high permeability via organic anion-transporting polypeptide 2B1 (OATP2B1)-mediated transport. Importantly, D-4'-I increased the oral bioavailability by 15.5-fold, reduced the gender difference, and extended the linear absorption capacity in the pharmacokinetics of DAN in rats. Furthermore, D-4'-I exhibited dose-dependent protection against liver injury. Thus, the natural amino acid-bearing carbamate prodrug strategy shows potential in increasing water solubility and improving phase II metabolic stability to enhance the oral bioavailability of DAN.

Cerium oxide nanoparticles: Synthesis methods and applications in wound healing

Wound care and treatment can be critical from a clinical standpoint. While different strategies for the management and treatment of skin wounds have been developed, the limitations inherent in the current approaches necessitate the development of more effective alternative strategies. Advances in tissue engineering have resulted in the development of novel promising approaches for accelerating wound healing. The use of various biomaterials capable of accelerating the regeneration of damaged tissue is critical in tissue engineering. In this regard, cerium oxide nanoparticles (CeO2 NPs) have recently received much attention because of their excellent biological properties, such as antibacterial, anti-inflammatory, antioxidant, and angiogenic features. The incorporation of CeO2 NPs into various polymer-based scaffolds developed for wound healing applications has led to accelerated wound healing due to the presence of CeO2 NPs. This paper discusses the structure and functions of the skin, the wound healing process, different methods for the synthesis of CeO2 NPs, the biological properties of CeO2 NPs, the role of CeO2 NPs in wound healing, the use of scaffolds containing CeO2 NPs for wound healing applications, and the potential toxicity of CeO2 NPs.

Recent Advances on Emulsion and Foam Stability

In this perspective paper, we highlight the numerous open problems in the topic of stability of emulsions and foams, focusing on the simplest case of dispersions stabilized by surfactants. There are three main destabilization processes, gravity induced evolution, Ostwald ripening, and drops or bubble coalescence, which are analyzed separately. The discussion is restricted to the case of Newtonian fluids, deprived of microstructure, except for the presence of micelles. Thanks to continuing efforts and recent breakthroughs, we show that the understanding of emulsion and foam stability is progressing. Many problems are still open, however, and much work remains to be done along the lines outlined in the paper.

Review on Some Confusion Produced by the Bicontinuous Microemulsion Terminology and Its Domains Microcurvature: A Simple Spatiotemporal Model at Optimum Formulation of Surfactant-Oil-Water Systems

Fundamental studies have improved understanding of molecular-level properties and behavior in surfactant-oil-water (SOW) systems at equilibrium and under nonequilibrium conditions. However, confusion persists regarding the terms "microemulsion" and "curvature" in these systems. Microemulsion refers to a single-phase system that does not contain distinct oil or water droplets but at least four different structures with globular domains of nanometer size and sometimes arbitrary shape. The significance of "curvature" in such systems is unclear. At high surfactant concentrations (typically 30 wt % or more), a single phase zone has been identified in which complex molecular arrangements may result in light scattering. As surfactant concentration decreases, the single phase is referred to as a bicontinuous microemulsion, known as the middle phase in a Winsor III triphasic system. Its structure has been described as involving simple or multiple surfactant films surrounding more or less elongated excess oil and water phase globules. In cases where the system separates into two or three phases, known as Winsor I or II systems, one of the phases, containing most of the surfactant, is also confusedly referred to as the microemulsion. In this surfactant-rich phase, the only curved objects are micellar size structures that are soluble in the system and have no real interface but rather exchange surfactant molecules with the external liquid phase at an ultrafast pace. The use of the term "curvature" in the context of these complex microemulsion systems is confusing, particularly when applied to merged nanometer-size globular or percolating domains. In this work, we discuss the terms "microemulsion" and "curvature", and the most simple four-dimensional spatiotemporal model is proposed concerning SOW equilibrated systems near the optimum formulation. This model explains the motion of surfactant molecules due to Brownian movement, which is a quick and arbitrary thermal fluctuation, and limited to a short distance. The resulting observation and behavior will be an average in time and in space, leading to a permanent change in the local microcurvature of the aggregate, thus changing the average from micelle-like to inverse micelle-like order over an extremely short time. The term "microcurvature" is used to explain the small variations of globule size and indicates a close-to-zero mean curvature of the surfactant-containing film surface shape.

Coalescence of a Ferrofluid Drop at Its Bulk Surface with or without a Magnetic Field

The coalescence of a ferrofluid drop at its bulk surface, with or without a magnetic field, was investigated experimentally by a high-speed camera. Shape deformations of both the pendant ferrofluid drop and the bulk surface in the axial direction were observed during the approaching process even in the absence of a magnetic field. The angle of the upper pendant peak at the first contact decreases with the magnetic flux density, while the lower ferrofluid peak displays an opposite trend. The coalescing width of the ferrofluid drop follows a power-law relationship. The exponent of 0.64 under medium and high magnetic fields as well as the case without magnetic field confirms the inertial regime of drop coalescence. Under the low magnetic field, the significant exponent increasing from 0.59 to 3.02 at about 4 ms is in coincidence with the sudden change to a smooth coalescing section according to the visualized images. A high-speed microparticle image velocimetry (micro-PIV) technique was employed with a transparent model fluid to reveal the flow fields during the drop coalescence instead of opaque ferrofluids.

Species Distribution in Bicontinuous Phase Systems for Enhanced Oil Recovery Probed by Single-Sided NMR

Multiphase aqueous-organic systems where a bicontinuous phase is in equilibrium with an excess organic and aqueous phase find various applications in industry. These systems─also known as Winsor III─are complex not only for the different phases that develop therein but also because they are multicomponent systems. In this work, we explore for the first time the use of a benchtop low-field single-sided NMR to determine the species distribution in Winsor III systems. The proposed methodology provides information at macroscopic and microscopic levels. In particular, we show the use of single-sided NMR to determine the phases' dimensions and the species distribution in a polymer-based bicontinuous system. The phases' dimensions and limits can be resolved with micrometric precision and are indicative of the bicontinuous phase stability. The species distribution is determined by means of spatially resolved NMR relaxation and diffusion experiments. It was observed that the salinity of the aqueous phase also impacts the species distribution in the bicontinuous system. Experiments show that the additive and the polymer are mainly located in the bicontinuous phase. As the salinity of the aqueous phase increases, the amount of organic components in the bicontinuous phase decreases as a consequence of the species distribution in the system. This influences the total amount of recovered organic liquid from the organic phase. The information is obtained in a relatively fast experiment and is relevant to the system's possible applications, such as enhanced oil recovery (EOR). This methodology is not only circumscribed to its application in EOR but can also be applied to the study of any emulsion or microemulsion systems without sample size or geometry constraints.

Dilational Rheological Properties of Surfactants at the Crude Oil-Water Interface: The Effect of Branch-Preformed Particle Gels and Polymers

The interfacial properties of a heterogeneous composite flooding system containing a surfactant fatty alcohol polyoxyethylene carboxylate (C₁₂EO₃C), branched-preformed particle gel (B-PPG), and polymer partly hydrolyzed polyacrylamide (HPAM) at the crude oil-water interface were investigated by a dilational rheology method. The results demonstrated that the C₁₂EO₃C molecules can form an elastic interfacial film with certain strength at the crude oil-water interface. The addition of HPAM to the C₁₂EO₃C solution has a detrimental effect on the interfacial film formed by C₁₂EO₃C molecules, leading to a decrease in the dilational modulus and an increase in the phase angle. Moreover, the addition of B-PPG to the C₁₂EO₃C solution also disrupts the stability and strength of the interfacial film of C₁₂EO₃C. In particular, linear HPAM with a lower steric hindrance is more likely to insert into the interfacial film of C₁₂EO₃C; thus, HPAM possesses a stronger destruction ability for the interfacial film of C₁₂EO₃C than B-PPG. When HPAM is compounded with B-PPG, a superimposed effect exists to cause more severe disruption for the interfacial film. The heterogeneous composite flooding system not only enhances oil recovery by increasing the viscosity of the bulk phase but also weakens the interfacial film to facilitate the post-treatment of the recovered crude oil. Thus, the heterogeneous composite flooding system exhibits promising prospects in practical application.

The Oscillatory Spinning Drop Technique. An Innovative Method to Measure Dilational Interfacial Rheological Properties of Brine-Crude Oil Systems in the Presence of Asphaltenes

The oscillatory spinning drop method has been proven recently to be an accurate technique to measure dilational interfacial rheological properties. It is the only available equipment for measuring dilational moduli in low interfacial tension systems, as it is the case in applications dealing with surfactant-oil-water three-phase behavior like enhanced oil recovery, crude oil dehydration, or extreme microemulsion solubilization. Different systems can be studied, bubble-in-liquid, oil-in-water, microemulsion-in-water, oil-in-microemulsion, and systems with the presence of complex natural surfactants like asphaltene aggregates or particles. The technique allows studying the characteristics and properties of water/oil interfaces, particularly when the oil contains asphaltenes and when surfactants are present. In this work, we present a review of the measurements of crude oil-brine interfaces with the oscillating spinning drop technique. The review is divided into four sections. First, an introduction on the oscillating spinning drop technique, fundamental and applied concepts are presented. The three sections that follow are divided according to the complexity of the systems measured with the oscillating spinning drop, starting with simple surfactant-oil-water systems. Then the complexity increases, presenting interfacial rheology properties of crude oil-brine systems, and finally, more complex surfactant-crude oil-brine systems are reviewed. We have found that using the oscillating spinning drop method to measure interfacial rheology properties can help make precise measurements in a reasonable amount of time. This is of significance when systems with long equilibration times, e.g., asphaltene or high molecular weight surfactant-containing systems are measured, or with systems formulated with a demulsifier which is generally associated with low interfacial tension.

Effect of a Surfactant Mixture on Coalescence Occurring in Concentrated Emulsions: The Hole Nucleation Theory Revisited

By conducting both a bottle test and isolate drop-drop experiments, we determine the coalescence rates of water droplets within water-in-oil emulsions stabilized by a large amount of Span 80 in the presence of Tween 20, a surfactant that acts as a demulsifier. Using a microscopic model based on a theory of hole nucleation, we establish an analytical formula that quantitatively predicts the coalescence frequency per unit area of droplets whose interfaces are fully covered by surfactant molecules. Despite its simplicity and the strong assumptions made for its derivation, this formula captures our experimental findings on Span 80-stabilized emulsions as well as other results, found in the literature, remarkably well on a wide range of water-in-crude oil systems.

Using Microemulsion Phase Behavior as a Predictive Model for Lecithin-Tween 80 Marine Oil Dispersant Effectiveness

Marine oil dispersants typically contain blends of surfactants dissolved in solvents. When introduced to the crude oil-seawater interface, dispersants facilitate the breakup of crude oil into droplets that can disperse in the water column. Recently, questions about the environmental persistence and toxicity of commercial dispersants have led to the development of "greener" dispersants consisting solely of food-grade surfactants such as l-α-phosphatidylcholine (lecithin, L) and polyoxyethylenated sorbitan monooleate (Tween 80, T). Individually, neither L nor T is effective at dispersing crude oil, but mixtures of the two (LT blends) work synergistically to ensure effective dispersion. The reasons for this synergy remain unexplained. More broadly, an unresolved challenge is to be able to predict whether a given surfactant (or a blend) can serve as an effective dispersant. Herein, we investigate whether the LT dispersant effectiveness can be correlated with thermodynamic phase behavior in model systems. Specifically, we study ternary "DOW" systems comprising LT dispersant (D) + a model oil (hexadecane, O) + synthetic seawater (W), with the D formulation being systematically varied (across 0:100, 20:80, 40:60, 60:40, 80:20, and 100:0 L:T weight ratios). We find that the most effective LT dispersants (60:40 and 80:20 L:T) induce broad Winsor III microemulsion regions in the DOW phase diagrams (Winsor III implies that the microemulsion coexists with aqueous and oil phases). This correlation is generally consistent with expectations from hydrophilic-lipophilic deviation (HLD) calculations, but specific exceptions are seen. This study then outlines a protocol that allows the phase behavior to be observed on short time scales (ca. hours) and provides a set of guidelines to interpret the results. The complementary use of HLD calculations and the outlined fast protocol are expected to be used as a predictive model for effective dispersant blends, providing a tool to guide the efficient formulation of future marine oil dispersants.

Formulation Improvements in the Applications of Surfactant-Oil-Water Systems Using the HLDN Approach with Extended Surfactant Structure

Soap applications for cleaning and personal care have been used for more than 4000 years, dating back to the pharaonic period, and have widely proliferated with the appearance of synthetic surfactants a century ago. Synthetic surfactants used to make macro-micro-nano-emulsions and foams are used in laundry and detergency, cosmetics and pharmaceuticals, food conditioning, emulsified paints, explosives, enhanced oil recovery, wastewater treatment, etc. The introduction of a multivariable approach such as the normalized hydrophilic–lipophilic deviation (HLD _N) and of specific structures, tailored with an intramolecular extension to increase solubilization (the so-called extended surfactants), makes it possible to improve the results and performance in surfactant–oil–water systems and their applications. This article aims to present an up-to-date overview of extended surfactants. We first present an introduction regarding physicochemical formulation and its relationship with performance. The second part deals with the importance of HLD _N to make a straightforward classification according to the type of surfactants and how formulation parameters can be used to understand the need for an extension of the molecule reach into the oil and water phases. Then, extended surfactant characteristics and strategies to increase performance are outlined. Finally, two specific applications, i.e., drilling fluids and crude oil dewatering, are described.

Surfactants: physicochemical interactions with biological macromolecules

Macromolecules are essential cellular components in biological systems responsible for performing a large number of functions that are necessary for growth and perseverance of living organisms. Proteins, lipids and carbohydrates are three major classes of biological macromolecules. To predict the structure, function, and behaviour of any cluster of macromolecules, it is necessary to understand the interaction between them and other components through basic principles of chemistry and physics. An important number of macromolecules are present in mixtures with surfactants, where a combination of hydrophobic and electrostatic interactions is responsible for the specific properties of any solution. It has been demonstrated that surfactants can help the formation of helices in some proteins thereby promoting protein structure formation. On the other hand, there is extensive research towards the use of surfactants to solubilize drugs and pharmaceuticals; therefore, it is evident that the interaction between surfactants with macromolecules is important for many applications which includes environmental processes and the pharmaceutical industry. In this review, we describe the properties of different types of surfactants that are relevant for their physicochemical interactions with biological macromolecules, from macromolecules–surfactant complexes to hydrophobic and electrostatic interactions.

How to Use the Normalized Hydrophilic-Lipophilic Deviation (HLDN) Concept for the Formulation of Equilibrated and Emulsified Surfactant-Oil-Water Systems for Cosmetics and Pharmaceutical Products

The effects of surfactant molecules involved in macro-, mini-, nano-, and microemulsions used in cosmetics and pharmaceuticals are related to their amphiphilic interactions with oil and water phases. Basic ideas on their behavior when they are put together in a system have resulted in the energy balance concept labeled the hydrophilic-lipophilic deviation (HLD) from optimum formulation. This semiempirical equation integrates in a simple linear relationship the effects of six to eight variables including surfactant head and tail, sometimes a cosurfactant, oil-phase nature, aqueous-phase salinity, temperature, and pressure. This is undoubtedly much more efficient than the hydrophilic-lipophilic balance (HLB) which has been used since 1950. The new HLD is quite important because it allows researchers to model and somehow predict the phase behavior, the interfacial tension between oil and water phases, their solubilization in single-phase microemulsion, as well as the corresponding properties for various kinds of macroemulsions. However, the HLD correlation, which has been developed and used in petroleum applications, is sometimes difficult to apply accurately in real cases involving ionic–nonionic surfactant mixtures and natural polar oils, as it is the case in cosmetics and pharmaceuticals. This review shows the confusion resulting from the multiple definitions of HLD and of the surfactant parameter, and proposes a “normalized” Hydrophilic-Lipophilic Deviation (HLDN) equation with a surfactant contribution parameter (SCP), to handle more exactly the effects of formulation variables on the phase behavior and the micro/macroemulsion properties.

On the rupture of thin films made from aqueous surfactant solutions

This short review describes the work on aqueous foam film stability with the important past contributions of Dotchi Exerowa and Dimo Platikanov, together with advances from other research groups. The review is focused on film rupture, for which few controlled experiments can be found in the literature and as a consequence, our understanding is still limited. The work on rupture of films in foams is described, together with the correlations with the rupture of isolated films. The review addresses mainly the case of aqueous films and foams, but analog studies of emulsions and emulsion films are also briefly discussed.

Oil-in-Water fL Droplets by Interfacial Spontaneous Fragmentation and Their Electrical Characterization

Inkjet printing is here employed for the first time as a method to produce femtoliter-scale oil droplets dispersed in water. In particular, picoliter-scale fluorinated oil (FC40) droplets are printed in the presence of perfluoro-1-octanol surfactant at a velocity higher than 5 m/s. Femtoliter-scale oil droplets in water are spontaneously formed through a fragmentation process at the water/air interface using minute amounts of nonionic surfactant (down to 0.003% v/v of Tween 80). This fragmentation occurs by a Plateau-Rayleigh mechanism at a moderately high Weber number (10¹). A microfluidic chip with integrated microelectrodes allows droplets characterization in terms of number and diameter distribution (peaked at about 3 μm) by means of electrical impedance measurements. These results show an unprecedented possibility to scale oil droplets down to the femtoliter scale, which opens up several perspectives for a tailored oil-in-water emulsion fabrication for drug encapsulation, pharmaceutic preparations, and cellular biology.