Oligomers as Triggers for Responsive Liquid Crystals

Liquid Crystalline Systems from Nature and Interaction of Living Organisms with Liquid Crystals

Biomaterials, which are substances interacting with biological systems, have been extensively explored to understand living organisms and obtain scientific inspiration (such as biomimetics). However, many aspects of biomaterials have yet to be fully understood. Because liquid crystalline phases are ubiquitously found in biomaterials (e.g., cholesterol, amphiphile, DNA, cellulose, bacteria), therefore, a wide range of research has made attempts to approach unresolved issues with the concept of liquid crystals (LCs). This review presents these studies that address the interactive correlation between biomaterials and LCs. Specifically, intrinsic LC behavior of various biomaterials such as DNA, cellulose nanocrystals, and bacteriaare first introduced. Second, the dynamics of bacteria in LC media are addressed, with focus on how bacteria interact with LCs, and how dynamics of bacteria can be controlled by exploiting the characteristics of LCs. Lastly, how the strong correlation between LCs and biomaterials has been leveraged to design a new class of biosensors with additional functionalities (e.g., self-regulated drug release) that are not available in previous systems is reviewed. Examples addressed in this review convey the message that the intersection between biomaterials and LCs offers deep insights into fundamental understanding of biomaterials, and provides resources for development of transformative technologies.

Dissipative Particle Dynamics Simulation of the Sensitive Anchoring Behavior of Smectic Liquid Crystals at Aqueous Phase

Rational design of thermotropic liquid crystal (LC)-based sensors utilizing different mesophases holds great promise to open up novel detection modalities for various chemical and biological applications. In this context, we present a dissipative particle dynamics study to explore the unique anchoring behavior of nematic and smectic LCs at amphiphile-laden aqueous-LC interface. By increasing the surface coverage of amphiphiles, two distinct anchoring sequences, a continuous planar-tilted-homeotropic transition and a discontinuous planar-to-homeotropic transition, can be observed for the nematic and smectic LCs, respectively. More importantly, the latter occurs at a much lower surface coverage of amphiphiles, demonstrating an outstanding sensitivity for the smectic-based sensors. The dynamics of reorientation further reveals that the formation of homeotropic smectic anchoring is mainly governed by the synchronous growth of smectic layers through the LCs, which is significantly different from the mechanism of interface-to-bulk ordering propagation in nematic anchoring. Furthermore, the smectic LCs have also been proven to possess a potential selectivity in response to a subtle change in the chain rigidity of amphiphiles. These simulation findings are promising and would be valuable for the development of novel smectic-based sensors.

Controlling Liquid Crystal Configuration and Phase Using Multiple Molecular Triggers

Liquid crystals are able to transform a local molecular interaction into a macroscopic change of state, making them a valuable "smart" material. Here, we investigate a novel polymeric amphiphile as a candidate for molecular triggering of liquid crystal droplets in aqueous background. Using microscopy equipped with crossed polarizers and optical tweezers, we find that the monomeric amphiphile is able to trigger both a fast phase change and then a subsequent transition from nematic to isotropic. We next include sodium dodecyl sulfate (SDS), a standard surfactant, with the novel amphiphilic molecules to test phase transitioning when both were present. As seen previously, we find that the activity of SDS at the surface can result in configuration changes with hysteresis. We find that the presence of the polymeric amphiphile reverses the hysteresis previously observed during such transitions. This work demonstrates a variety of phase and configuration changes of liquid crystals that can be controlled by multiple exogenous chemical triggers.

Tailoring Liquid Crystals as Vehicles for Encapsulation and Enzyme-Triggered Release

Nanoscale assemblies of amphiphiles have been vividly explored in pharmaceutical formulations as drug nanocarriers. Aqueous interfaces of liquid crystals (LCs) are known to direct the self-assembly of a range of...

Probing Nanoscale Lipid-Protein Interactions at the Interface of Liquid Crystal Droplets

Aqueous interfaces of liquid crystals (LCs) are widely explored in the design of functional interfaces to recapitulate the key aspects of biomolecular interactions in cellular milieu. Herein, using aqueous LC dispersions, we explore the interactions between mitochondrial cardiolipin and membrane-associated cytochrome c which play a pivotal role in the apoptotic signaling cascade. Conventional techniques used to decipher LC ordering at the droplet interface fail to give information about the interactions at a molecular level. Besides, owing to the complexity of LC systems and multiple determinants driving the LC reorientation, accurate analysis of the underlying mechanism responsible for the LC ordering transition remains challenging. Using a combination of atomistic simulations and microscopic and spectroscopic readouts, for the first time, we unveil the lipid-protein interactions that drive the reorientation at the LC droplet interface. The insights from our work are fundamental to the design of these interfaces for a spectrum of interfacial applications.

Potential liquid crystal-based biosensor depending on the interaction between liquid crystals and proteins

Liquid crystal biosensors serve an essential role to detect biomolecules and chemical events as an effective, simple and early detection tool. The detection of Human serum albumin protein by a room temperature liquid crystal 4́-pentyl-4-biphenylcarbonitrile has been investigated using multiple techniques such as Polarizing optical microscope, Raman spectroscopy and molecular docking. The dynamics of director transfigurations of the liquid crystal molecule in the presence of protein through interactions are reported in the study. The change in the alignment of liquid crystal molecules during the nematic phase is observed under a polarizing optical microscope. The interactions through which the liquid crystal molecules bind with protein is depicted from the docking analysis. The residues in the active sites confirm their presence from docking studies. The spectral behaviour has been investigated by temperature-dependent Raman spectroscopy. The findings from Raman spectra for the interaction between these compounds correlates with the residues confirmed from molecular docking analysis.

Using Liquid Crystals for In Situ Optical Mapping of Interfacial Mobility and Surfactant Concentrations at Flowing Aqueous-Oil Interfaces

Flow-induced states of fluid interfaces decorated with amphiphiles underlie phenomena such as emulsification, foaming, and spreading. While past studies have shown that interfacial mass transfer, the kinetics of surfactant adsorption and desorption, interfacial mobility, and surfactant reorganization regulate the dynamic properties of surfactant-laden interfaces, few simple methods permit simultaneous monitoring of this interplay. Here, we explore the optical responses of micrometer-thick films of oils (4-cyano-4'-pentylbiphenyl, 5CB) with a liquid crystalline order in contact with flowing aqueous phases of soluble [e.g., sodium dodecyl sulfate (SDS)] or insoluble (e.g., 1,2-dilauroyl-sn-glycero-3-phosphocholine) amphiphiles. We observe the onset of flow of 0.5 mM SDS solutions within a millifluidic channel (area-average velocity of 200 mm/s) to transform a liquid crystal (LC) film with an alignment along the interface normal into a bright birefringent state (average LC tilt angle of 30°), consistent with an initially mobile interface that shears and thus tilts the LC along the flow direction. Subsequently, we observed the LC film to evolve to a steady state (over ∼10 s) with position-dependent optical retardance controlled by gradients in surfactant concentration and thus Marangoni stresses. For 0.5 mM SDS solutions, by using particle tracking and a simple hydrodynamic model, we reveal that the dominant role of the flow-induced interfacial surfactant concentration gradient is to change the mobility of the interface (and thus shear rate of LC) and not to change the easy axis (equilibrium orientation) or anchoring energy (orientation-dependent interfacial energy) of the LC. At lower surfactant concentrations (0.015 mM SDS), however, we show that the LC directly maps flow-induced interfacial surfactant concentration gradients via a change in the local easy axis of the LC. When combined with additional measurements obtained with simple salts and insoluble amphiphiles, these results hint that LC oils may offer the basis of general and facile methods that permit mapping of both interfacial mobilities and surfactant distributions at flowing interfaces.

Impurity-induced nematic-isotropic transition of liquid crystals

Complex fluids made of liquid crystals (LCs) and small molecules, surfactants, nanoparticles or 1D/2D nanomaterials show novel and interesting features, making them suitable materials for various applications starting from optoelectronics to biosensing. While these additives (impurities) introduce new features in the complex fluids, they may also alter the phase transition behaviour of LCs depending on the physiochemical properties of the added impurity. This article reports on the phase transition of 4-cyano-4'-alkylbiphenyl (nCB) LCs in the presence of an associative impurity, i.e., water and a non-associative impurity, i.e., hexane employing computational methods and experiments. In particular, all-atom (AA) simulations and coarse-grained (CG) models were designed for two complex systems, i.e., 6CB + water and 6CB + hexane and corresponding spectrophotometry experiments were performed using a homologous LC, i.e., 5CB. Results from the simulations and experiments elucidate that the phase transition of LCs depends on the mixing/demixing phenomenon of the impurity in the LC. While associative liquids like water which do not mix with LCs do not influence the nematic-to-isotropic phase transition of LCs, hexane, being a non-associative liquid, mixes well with LCs and induces a sharp impurity-induced nematic-to-isotropic phase transition. Upon application of both AA and CG simulations, we could reach the conclusion that the mixing/demixing phenomenon in an LC + impurity system influences the entropy of the system and hence the observed phase transitions are entropy-driven.

Holographic metasurface gas sensors for instantaneous visual alarms

The rapid detection of biological and chemical substances in real time is particularly important for public health and environmental monitoring and in the military sector. If the process of substance detection to visual reporting can be implemented into a single miniaturized sensor, there could be a profound impact on practical applications. Here, we propose a compact sensor platform that integrates liquid crystals (LCs) and holographic metasurfaces to autonomously sense the existence of a volatile gas and provide an immediate visual holographic alarm. By combining the advantage of the rapid responses to gases realized by LCs with the compactness of holographic metasurfaces, we develop ultracompact gas sensors without additional complex instruments or machinery to report the visual information of gas detection. To prove the applicability of the compact sensors, we demonstrate a metasurface-integrated gas sensor on safety goggles via a one-step nanocasting process that is attachable to flat, curved, and flexible surfaces.

Nematic colloids at liquid crystal-air interfaces via photopolymerization

We demonstrate the preparation of colloidal crystals at nematic liquid crystal-air interfaces by simultaneous photopolymerization and assembly. Polymer colloids are produced by polymerization-induced phase separation of 2-hydroxyethyl methacrylate in the non-reactive liquid crystal (LC) 4-cyano-4'-pentylbiphenyl (5CB) using an open-cell setup. Colloids adsorbed to the nematic 5CB-air interface form non-close-packed hexagonal crystals that cover the entire interface area. We examine the mechanism of growth and assembly for the preparation of LC-templated interfacial colloidal superstructures.

Temperature-Driven Anchoring Transitions at Liquid Crystal/Water Interfaces

Controlling the anchoring of liquid crystal molecules at an interface with a water solution influences the entire organization of the underlying liquid crystal phase, which is crucial for many applications. The simplest way to stabilize such interfaces is by fabricating liquid crystal droplets in water; however, a greater sensitivity to interfacial effects can be achieved using liquid crystal shells, that is, spherical films of liquid crystal suspended in water. Anchoring transitions on those systems are traditionally triggered by the adsorption of surfactant molecules onto the interface, which is neither an instantaneous nor a reversible process. In this study, we report the ability to change the anchoring of 4-cyano-4'-pentylbiphenyl (5CB), one of the most widely used liquid crystals, at the interface with dilute water solutions of polyvinyl alcohol (PVA), a polymer commonly used for stabilizing liquid crystal shells, simply by controlling the temperature in the close vicinity of the liquid crystal clearing point. A quasi-static increase in temperature triggers an instantaneous reorientation of the molecules from parallel to perpendicular to the interfaces, owing to the local disordering effect of PVA on 5CB, prior to the phase transition of the bulk 5CB. We study this anchoring transition on both flat suspended films and spherical shells of liquid crystals. Switching anchoring entails a series of structural transformations involving the formation of transient structures in which topological defects are stabilized. The type of defect structure depends on the topology of the film. This method has the ability to influence both interfaces of the film nearly at the same time and can be applied to transform an initially polydisperse group of nematic shells into a monodisperse population of bivalent shells.

Direct Observation of Liquid Crystal Droplet Configurational Transitions using Optical Tweezers

Liquid crystals (LCs) are easily influenced by external interactions, particularly at interfaces. When rod-like LC molecules are confined to spherical droplets, they experience a competition between interfacial tension and elastic deformations. The configuration of LCs inside a droplet can be controlled using surfactants that influence the interfacial orientation of the LC molecules in the oil-phase of an oil in water emulsion. Here, we used the surfactant sodium dodecyl sulfate (SDS) to manipulate the orientation of 5CB molecules in a polydisperse emulsion and examined the configuration of the droplets as a function of SDS concentration. We triggered pronounced morphological transitions by altering the SDS concentration while observing an individual LC droplet held in place using an optical tweezer. We compared the experimental configuration changes to predictions from simulations. We observed a hysteresis in the SDS concentration that induced the morphological transition from radial to bipolar and back as well as a fluctuations in the configuration during the transition.

A New Strategy for Reporting Specific Protein Binding Events at Aqueous-Liquid Crystal Interfaces in the Presence of Non-Specific Proteins

Aqueous-liquid crystal (LC) interfaces offer promise as responsive interfaces at which biomolecular recognition events can be amplified into macroscopic signals. However, the design of LC interfaces that distinguish between specific and non-specific protein interactions remains an unresolved challenge. Herein, we report the synthesis of amphiphilic monomers, dimers, and trimers conjugated to sulfonamide ligands via triazole rings, their assembly at aqueous-LC interfaces, and the orientational response of LCs to the interactions of carbonic anhydrase II (CAII) and serum albumin with the oligomer-decorated LC interfaces. Of six oligomers synthesized, only dimers without amide methylation were found to assemble at aqueous interfaces of nematic 4-cyano-4'-pentylbiphenyl (5CB) to induce perpendicular LC orientations. At dimer-decorated LC interfaces, we found that concentrations of CAII less than 4 μM did not measurably perturb the LC but prevented non-specific adsorption and penetration of serum albumin into the dimer-decorated interface that otherwise triggered bright, globular LC optical domains. These experiments and others (including competitive adsorption of CAII, BSA, and lysozyme) support our hypothesis that specific binding of CAII to the dimer prevents LC anchoring transitions triggered by non-specific adsorption of serum albumin. We illustrate the utility of the approach by reporting (i) the relative activity of two small-molecule inhibitors (6-ethoxy-2-benzothiazolesulfonamide and benzenesulfonamide) of CAII to sulfonamide and (ii) proteolytic digestion of a protein (CAII) by thermolysin. Overall, the results in this paper provide new insight into the interactions of proteins at aqueous-LC interfaces and fresh ideas for either blocking non-specific interactions of proteins at surfaces or reporting specific binding events at LC interfaces in the presence of non-specific proteins.

Soft matter from liquid crystals

Liquid crystals (LCs) are fluids within which molecules exhibit long-range orientational order, leading to anisotropic properties such as optical birefringence and curvature elasticity. Because the ordering of molecules within LCs can be altered by weak external stimuli, LCs have been widely used to create soft matter systems that respond optically to electric fields (LC display), temperature (LC thermometer) or molecular adsorbates (LC chemical sensor). More recent studies, however, have moved beyond investigations of optical responses of LCs to explore the design of complex LC-based soft matter systems that offer the potential to realize more sophisticated functions (e.g., autonomous, self-regulating chemical responses to mechanical stimuli) by directing the interactions of small molecules, synthetic colloids and living cells dispersed within the bulk of LCs or at their interfaces. These studies are also increasingly focusing on LC systems driven beyond equilibrium states. This review presents one perspective on these advances, with an emphasis on the discovery of fundamental phenomena that may enable new technologies. Three areas of progress are highlighted; (i) directed assembly of amphiphilic molecules either within topological defects of LCs or at aqueous interfaces of LCs, (ii) templated polymerization in LCs via chemical vapor deposition, an approach that overcomes fundamental challenges related to control of LC phase behavior during polymerization, and (iii) studies of colloids in LCs, including chiral colloids, soft colloids that are strained by LCs, and active colloids that are driven into organized states by dissipation of energy (e.g. bacteria). These examples, and key unresolved issues discussed at the end of this perspective, serve to convey the message that soft matter systems that integrate ideas from LC, surfactant, polymer and colloid sciences define fertile territory for fundamental studies and creation of future transformative technologies.

Investigation of the Assembly Behavior of an Amphiphilic Lipopeptide at the Liquid Crystal-Aqueous Interface

In this article, we designed an amphiphilic lipopeptide molecule, 5(6)-carboxyfluorescein-KKKKKKSKTK-Cys(C₁₂H₂₅)-OMe (FAM-lipopeptide-C12), and studied its assembly behavior at the 4-cyano-4'-pentylbiphenyl (5CB)-aqueous interface. The ordering transitions of liquid crystals (LCs) revealed that FAM-lipopeptide-C12 can assemble at the LC-aqueous interface (both planar and curved interfaces). The assembly can be destroyed by adding trypsin, which catalyzes the hydrolysis of lipopeptides. Fluorescence measurements further confirmed the assembly and deassembly behavior of FAM-lipopeptide-C12 at the LC-aqueous interface. Overall, our work provides a general method for the construction of a biointerface by directly assembling amphiphilic lipopeptides at the LC-aqueous interface, which can potentially be used in selectively detecting the activity of specific enzymes and other biomolecular interactions.