Counteracting Interfacial Energetics for Wetting of Hydrophobic Surfaces in the Presence of Surfactants

Unraveling the Potential of Vitamin B3-Derived Salts with a Salicylate Anion as Dermal Active Agents for Acne Treatment

This study is focused on the utilization of naturally occurring salicylic acid and nicotinamide (vitamin B3) in the development of novel sustainable Active Pharmaceutical Ingredients (APIs) with significant potential for treating acne vulgaris. The study highlights how the chemical structure of the cation significantly influences surface activity, lipophilicity, and solubility in aqueous media. Furthermore, the new ionic forms of APIs, the synthesis of which was assessed with Green Chemistry metrics, exhibited very good antibacterial properties against common pathogens that contribute to the development of acne, resulting in remarkable enhancement of biological activity ranging from 200 to as much as 2000 times when compared to salicylic acid alone. The molecular docking studies also revealed the excellent anti-inflammatory activity of N-alkylnicotinamide salicylates comparable to commonly used drugs (indomethacin, ibuprofen, and acetylsalicylic acid) and were even characterized by better IC50 values than common anti-inflammatory drugs in some cases. The derivative, featuring a decyl substituent in the pyridinium ring of nicotinamide, exhibited efficacy against Cutibacterium acnes while displaying favorable water solubility and improved wettability on hydrophobic surfaces, marking it as particularly promising. To investigate the impact of the APIs on the biosphere, the EC50 parameter was determined against a model representative of crustaceans─Artemia franciscana. The majority of compounds (with the exception of the salt containing the dodecyl substituent) could be classified as "Relatively Harmless" or "Practically Nontoxic", indicating their potential low environmental impact, which is essential in the context of modern drug development.

Importance of adjuvant formulation properties in predicting wetting on leaf surfaces

BACKGROUND

Leaf wettability can be a barrier to retention of agrichemical sprays. Adjuvants are used to modify leaf wetting by sprays to enhance retention. A previous study developed a model that accurately predicted nonadjuvant formulation wetting (contact angle) on both synthetic and leaf surfaces. Model inputs were the surface properties, roughness and polarity, as measured by the wetting tension dielectric method, coupled with the formulation properties, surface tension and dielectric constant. Preliminary work has indicated that the wetting ability of adjuvant formulations on different surfaces could be modelled in a similar way if the effect of adjuvants on solution polarity could be accurately quantified.

RESULTS

The wetting of nine agrichemical adjuvants, at a range of concentrations, were measured on seven synthetic and 14 leaf surfaces. A novel method was developed to quantify the interfacial dielectric polarity (IDP) of adjuvant formulations. Adjuvant concentration did not change the IDP indicating the surface-active surfactant molecules migrate to the interface, loading until saturation. Formulation properties of surface tension and IDP were found to be strong predictors of wetting in conjunction with surface properties of the substrate. The previously developed unaltered comprehensive wetting model could predict the wetting of adjuvant formulations on synthetic and leaf surfaces (R2  = 0.9) using these inputs.

CONCLUSIONS

Wetting of adjuvant formulations can be modelled for a wide range of surfaces and this model is expected to advance the selection, and development, of adjuvants to target specific surfaces generating the desired wetting outcome. © 2022 The Authors. Pest Management Science published by John Wiley & Sons Ltd on behalf of Society of Chemical Industry.

Importance of leaf surface and formulation properties in predicting wetting outcomes

BACKGROUND

Leaf wettability is a major hurdle for the retention of agrichemical sprays that is combated, in part, by using adjuvant modified formulations. Scientists must understand the properties of the leaf surface and the formulation that govern wetting to intelligently select or formulate products to target specific pests.

RESULTS

A comprehensive database comprising 11 synthetic surfaces and 54 leaf surfaces (species, adaxial and abaxial sides, cultivars, and plant age) using 35 formulations (neat solutions and adjuvants solutions at different concentrations) was compiled. Surface properties of the physical roughness and chemical polarity, as quantified by the wetting tension dielectric method, and formulation properties of surface tension and polarity, as quantified by dielectric constant, were found to govern wetting. A comprehensive wetting model was developed that employed these variables and was capable of accurately predicting the wetting outcome (R2  = 0.86) on all the leaf and synthetic surfaces investigated. This model adequately predicts adjuvant formulation wetting despite exact formulation polarity being unknown.

CONCLUSIONS

Wetting can be modelled for a wide range of surfaces and solutions. The comprehensive wetting model developed shows potential to better predict the wetting outcome of adjuvant formulations should a method to quantify the formulation dielectric constant be developed. This research provides a significant advancement in the understanding of the properties governing wetting, which may aid the selection and development of adjuvants to target specific surfaces. © 2022 Society of Chemical Industry.

Transfer Printing of Ordered Plasmonic Nanoparticles at Hard and Soft Interfaces with Increased Fidelity and Biocompatibility Supports a Surface Lattice Resonance

Transfer printing, the relocation of structures assembled on one surface to a different substrate by adjusting adhesive forces at the surface-substrate interface, is widely used to print electronic circuits on biological substrates like human skin and plant leaves. The fidelity of original structures must be preserved to maintain the functionality of transfer-printed circuits. This work developed new biocompatible methods to transfer a nanoscale square lattice of plasmon resonant nanoparticles from a lithographed surface onto leaf and glass substrates. The fidelity of the ordered nanoparticles was preserved across a large area in order to yield, for the first time, an optical surface lattice resonance on glass substrates. To effect the transfer, interfacial adhesion was adjusted by using laser induction of plasmons or unmounted adhesive. Optical and confocal laser scanning microscopy showed that submicron spacing of the square lattice was preserved in ≥90% of transfer-printed areas up to 4 mm2. Up to 90% of ordered nanoparticles were transferred, yielding a surface lattice resonance measured by transmission UV-vis spectroscopy.

Effects of surfactant adsorption on the wettability and friction of biomimetic surfaces

The properties of solid-liquid interfaces can be markedly altered by surfactant adsorption. Here, we use molecular dynamics (MD) simulations to study the adsorption of ionic surfactants at the interface between water and heterogeneous solid surfaces with randomly arranged hydrophilic and hydrophobic regions, which mimic the surface properties of human hair. We use the coarse-grained MARTINI model to describe both the hair surfaces and surfactant solutions. We consider negatively-charged virgin and bleached hair surface models with different grafting densities of neutral octadecyl and anionic sulfonate groups. The adsorption of cationic cetrimonium bromide (CTAB) and anionic sodium dodecyl sulfate (SDS) surfactants from water are studied above the critical micelle concentration. The simulated adsorption isotherms suggest that cationic surfactants adsorb to the surfaces via a two-stage process, initially forming monolayers and then bilayers at high concentrations, which is consistent with previous experiments. Anionic surfactants weakly adsorb via hydrophobic interactions, forming only monolayers on both virgin and medium bleached hair surfaces. We also conduct non-equilibrium molecular dynamics simulations, which show that applying cationic surfactant solutions to bleached hair successfully restores the low friction seen with virgin hair. Friction is controlled by the combined surface coverage of the grafted lipids and the adsorbed CTAB molecules. Treated surfaces containing monolayers and bilayers both show similar friction, since the latter are easily removed by compression and shear. Further wetting MD simulations show that bleached hair treated with CTAB increases the hydrophobicity to similar levels seen for virgin hair. Treated surfaces containing CTAB monolayers with the tailgroups pointing predominantly away from the surface are more hydrophobic than bilayers due to the electrostatic interactions between water molecules and the exposed cationic headgroups.

Conditions for the stable adsorption of lipid monolayers to solid surfaces

Lipid monolayers are ubiquitous in biological systems and have multiple roles in biotechnological applications, such as lipid coatings that enhance colloidal stability or prevent surface fouling. Despite the great technological importance of surface-adsorbed lipid monolayers, the connection between their formation and the chemical characteristics of the underlying surfaces has remained poorly understood. Here, we elucidate the conditions required for stable lipid monolayers nonspecifically adsorbed on solid surfaces in aqueous solutions and water/alcohol mixtures. We use a framework that combines the general thermodynamic principles of monolayer adsorption with fully atomistic molecular dynamics simulations. We find that, very universally, the chief descriptor of adsorption free energy is the wetting contact angle of the solvent on the surface. It turns out that monolayers can form and remain thermodynamically stable only on substrates with contact angles above the adsorption contact angle, θads. Our analysis establishes that θads falls into a narrow range of around 60∘-70∘ in aqueous media and is only weakly dependent on the surface chemistry. Moreover, to a good approximation, θads is roughly determined by the ratio between the surface tensions of hydrocarbons and the solvent. Adding small amounts of alcohol to the aqueous medium lowers θads and thereby facilitates monolayer formation on hydrophilic solid surfaces. At the same time, alcohol addition weakens the adsorption strength on hydrophobic surfaces and results in a slowdown of the adsorption kinetics, which can be useful for the preparation of defect-free monolayers.

Tuning Contact Angles of Aqueous Droplets on Hydrophilic and Hydrophobic Surfaces by Surfactants

Adsorption of small amphiphilic molecules occurs in various biological and technological processes, sometimes desired while other times unwanted (e.g., contamination). Surface-active molecules preferentially bind to interfaces and affect their wetting properties. We use molecular dynamics simulations to study the adsorption of short-chained alcohols (simple surfactants) to the water–vapor interface and solid surfaces of various polarities. With a theoretical analysis, we derive an equation for the adsorption coefficient, which scales exponentially with the molecular surface area and the surface wetting coefficient and is in good agreement with the simulation results. We apply the outcomes to aqueous sessile droplets containing surfactants, where the competition of surfactant adsorptions to both interfaces alters the contact angle in a nontrivial way. The influence of surfactants is the strongest on very hydrophilic and hydrophobic surfaces, whereas droplets on moderately hydrophilic surfaces are less affected.

Unraveling the Kinetics and Mechanism of Surfactant-Induced Wetting in Membrane Distillation: An In Situ Observation with Optical Coherence Tomography

In this study, we performed a direct contact membrane distillation and successfully demonstrated the non-invasive imaging of surfactant-induced wetting using optical coherence tomography. This method enabled us to investigate the wetting kinetics, which was found to follow a "three-region" relationship between the wetting rate and surfactant concentration: the (i) nonwetted region, (ii) concentration-dependent region, and (iii) concentration-independent region at low, intermediate, and high surfactant concentrations, respectively. This wetting behavior was explained by the "autophilic effect", i.e., the wetting was caused by the transfer of surfactants from the water-vapor interface to the unwetted membrane and rendered this membrane hydrophilic, and then the wetting frontier moved forward under capillary forces. At region-(i), the surfactant concentration in the water-vapor interface (C_lv) was too low to make the unwetted membrane sufficiently hydrophilic; thereby, the membrane could not be wetted. At region-(ii), due to the fast adsorption of the surfactant on the newly wetted membrane, the wetting rate was determined by the advection/diffusion of surfactants from the feed stream. Consequently, the wetting rate increased with the increases in the water flux and surfactant concentration. At region-(iii), the advection/diffusion provided excess surfactants for adsorption, and thus C_lv reached its upper limit (maximum surface excess) and the wetting rate leveled off.

Mechanistic insight into gel-induced aggregation of amorphous curcumin during dissolution process

Amorphous curcumin (CUR) exhibited a decreased dissolution rate in comparison with the crystalline counterpart due to its gel formation during dissolution. The main purpose of the present study is to explore the mechanism of such gelation phenomenon. It was found that the dissolution of amorphous CUR and gel properties were influenced by the temperature and pH of the media. The formed gels were characterized by TPA, SEM, DSC, XRPD, FTIR and PLM. The results indicated that the gelation process led to the formation of a porous structure in which water molecules infiltrate, and entered into its supercooled liquid state with high viscosity when contacting aqueous media, accompanied by decreased T_g and crystalline transformation. In addition, mixing with hydrophilic excipients (such as hydrophilic silica) accelerated the gel formation of amorphous CUR, while the addition of hydrophobic excipients (such as hydrophobic silica and magnesium stearate) could effectively weaken and even eliminate the gelation, hence significantly improving its dissolution. Furthermore, according to contact angle measurement and fluorescence microscope observation, hydrophilic excipients were found to be able to accelerate water entering into the interior of amorphous CUR, hence facilitating the gelation, while hydrophobic excipients would hinder water infiltration into the powder and thus achieve degelation. In conclusion, it is important to recognize that the gelation potential of some amorphous materials should be considered in developing robust amorphous drug product of high quality and performance.

Antisurfactant (Autophobic) Behavior of Superspreader Surfactant Solutions

Surfactants are often added to water to increase the wetting of hydrophobic surfaces. We previously showed that most surfactant solutions behave identically to simple liquids with the same surface tension, indicating that the surfactants do not change the wettability of the solid surface itself. Here, we show that the superspreading surfactant Silwet results in a systematically higher contact angle on a hydrophobic surface than other surfactant solutions of comparable liquid-vapor surface tension. We also experimentally observe this "antisurfactant" behavior for CTAB on hydrophilic substrates. Supported by sum-frequency generation spectroscopy results, we suggest that this effect is due to charge-binding of the surfactant with the substrate.

Wetting of Two-Component Drops: Marangoni Contraction Versus Autophobing

The wetting properties of multicomponent liquids are crucial to numerous industrial applications. The mechanisms that determine the contact angles for such liquids remain poorly understood, with many intricacies arising due to complex physical phenomena, for example, due to the presence of surfactants. Here, we consider two-component drops that consist of mixtures of vicinal alkanediols and water. These diols behave surfactant-like in water. However, the contact angles of such mixtures on solid substrates are surprisingly large. We experimentally reveal that the contact angle is determined by two separate mechanisms of completely different nature, namely, Marangoni contraction (hydrodynamic) and autophobing (molecular). The competition between these effects can even inhibit Marangoni contraction, highlighting the importance of molecular structures in physico-chemical hydrodynamics.

Drops That Change Their Mind: Spontaneous Reversal from Spreading to Retraction

A liquid drop may spread faster on surfaces when surfactants are added. Here we show that after some time the spreading in such systems can, under certain conditions, spontaneously reverse to retraction and the droplet pulls itself back, receding from areas it has just recently wetted, elevating its center of mass in a jerklike motion. The duration from drop placement to the onset of retraction ranges from hours to less than a second primarily as a function of surfactant concentration. When the retraction is asymmetric, it results in drop motion, and when it is symmetric, the mass of the drop collects itself on its spot. This phenomenon, which was predicted theoretically in 2014, is apparently a general one for drops with surfactants; however, other factors, such as evaporation and contamination, prevented its observance so far.