Contact Angle Relaxation and Long-Lasting Hydrophilicity of Sputtered Anatase TiO2 Thin Films by Novel Quantitative XPS Analysis

A Fe3+-Doped TiO2 Superhydrophilic Coating with Transparent and Long-Lasting Antifogging Properties Constructed Based on Nanostructured Antireflective and Capillary Anchoring Effects

Superhydrophilic surfaces have attracted great interest in antifogging applications. However, balancing long-lasting superhydrophilicity and high transparency on antifogging surfaces remains a serious problem to be solved. The objective of this work is to prepare superhydrophilic coatings with transparent and long-lasting antifogging properties. In the design, a three-step method was used to obtain the target coatings: (1) magnetron sputtering deposition of a TiN film to provide high intensity, (2) anodic oxidation of the TiN film to obtain TiO2 nanoparticles intended for nanostructured antireflective and capillary structures, and (3) the sol-gel method for the preparation of Fe3+-doped TiO2 coatings using spin-coating in order to achieve superhydrophilicity. The nanostructures, due to their subwavelength dimensions, not only provide high transparency but also recoverable superhydrophilicity owing to the presence of a capillary anchoring effect that prevents the coating from dissolving and peeling off after soaking. The doping of Fe3+ broadened the photoresponse range and maintained the long-lasting superhydrophilicity. Tests showed that the 2 mol % Fe3+-doped TiO2 coating with nanostructures exhibited the highest transparency, longest-lasting superhydrophilicity, and antifogging properties. Furthermore, the coating provided excellent self-cleaning properties, as well as mechanical and chemical stability.

Lithium-Doped Titanium Dioxide-Based Multilayer Hierarchical Structure for Accelerating Nerve-Induced Bone Regeneration

Despite considerable advances in artificial bone tissues, the absence of neural network reconstruction in their design often leads to delayed or ineffective bone healing. Hence, we propose a multilayer hierarchical lithium (Li)-doped titanium dioxide structure, constructed through microarc oxidation combined with alkaline heat treatment. This structure can induce the sustained release of Li ions, mimicking the environment of neurogenic osteogenesis characterized by high brain-derived neurotrophic factor (BDNF) expression. During in vitro experiments, the structure enhanced the differentiation of Schwann cells (SCs) and the growth of human umbilical vein endothelial cells (HUVECs) and mouse embryo osteoblast progenitor cells (MC3T3-E1). Additionally, in a coculture system, the SC-conditioned media markedly increased alkaline phosphatase expression and the formation of calcium nodules, demonstrating the excellent potential of the material for nerve-induced bone regeneration. In an in vivo experiment based on a rat distal femoral lesion model, the structure substantially enhanced bone healing by increasing the density of the neural network in the tissue around the implant. In conclusion, this study elucidates the neuromodulatory pathways involved in bone regeneration, providing a promising method for addressing bone deformities.

Activated carbon fibers functionalized with superhydrophilic coated pDA/TiO2/SiO2 with photoluminescent self-cleaning properties for efficient oil-water separation

The adhesion of high-viscosity oil contamination poses limitations on three-dimensional (3D) materials' practical use in treating oilfield-produced water (OPW). In this study, we developed a hybrid pDA/TiO2/SiO2 coating (PTS) on the surface of hydrophilic activated carbon (ACF1) through a combination of dopamine (DA) polymerization, ethyl orthosilicate (TEOS) hydrolysis, and the condensation of TiO2 nanoparticles (NPs) with SiO2 NPs. This coating was designed for gravity-based oil-water separation. The inherent porosity and generous pore size of ACF1-PTS conferred it an ultra-high permeation flux (pure water flux of 3.72 × 105 L∙m-2∙h-1), allowing it to effectively separate simulated oil-water mixtures and oil-water emulsions while maintaining exceptional permeation flux and oil rejection efficiency. When compared to cleaning methods involving ethanol aqueous solutions and NaClO, ultraviolet (UV) illumination cleaning proved superior, enabling oil-contaminated ACF1-PTS to exhibit remarkable flux recovery efficiency and oil-removal capabilities during cyclic separation of actual OPW. Furthermore, the ACF1-PTS material demonstrated impressive stability and durability when exposed to acidic environments (acid, alkali, and salt), robust hydraulic washout conditions, and 25-cycle tests. This study offers valuable insights and research avenues for the development of highly efficient and environmentally friendly 3D oil-water separation materials for the actual treatment of OPW.

Surface (bio)-functionalization of metallic materials: How to cope with real interfaces?

Metallic materials are an important class of biomaterials used in various medical devices, owing to a suitable combination of their mechanical properties. The (bio)-functionalization of their surfaces is frequently performed for biocompatibility requirements, as it offers a powerful way to control their interaction with biological systems. This is particularly important when physicochemical processes and biological events, mainly involving proteins and cells, are initiated at the host-material interface. This review addresses the state of "real interfaces" in the context of (bio)-functionalization of metallic materials, and the necessity to cope with it to avoid frequent improper evaluation of the procedure used. This issue is, indeed, well-recognized but often neglected and emerges from three main issues: (i) ubiquity of surface contamination with organic compounds, (ii) reactivity of metallic surfaces in biological medium, and (iii) discrepancy in (bio)-functionalization procedures between expectations and reality. These disturb the assessment of the strategies adopted for surface modifications and limit the possibilities to provide guidelines for their improvements. For this purpose, X-ray photoelectrons spectroscopy (XPS) comes to the rescue. Based on significant progresses made in methodological developments, and through a large amount of data compiled to generate statistically meaningful information, and to insure selectivity, precision and accuracy, the state of "real interfaces" is explored in depth, while looking after the two main constituents: (i) the bio-organic adlayer, in which the discrimination between the compounds of interest (anchoring molecules, coupling agents, proteins, etc) and organic contaminants can be made, and (ii) the metallic surface, which undergoes dynamic processes due to their reactivity. Moreover, through one of the widespread (bio)-functionalization strategy, given as a case study, a particular attention is devoted to describe the state of the interface at different stages (composition, depth distribution of contaminants and (bio)compounds of interest) and the mode of protein retention. It is highlighted, in particular, that the occurrence or improvement of bioactivity does not demonstrate that the chemical schemes worked in reality. These aspects are particularly essential to make progress on the way to choose the suitable (bio)-functionalization strategy and to provide guidelines to improve its efficiency.

Impact of Hydrophobic and Electrostatic Forces on the Adsorption of Acacia Gum on Oxide Surfaces Revealed by QCM-D

The adsorption of Acacia gum from two plant exudates, A. senegal and A. seyal, at the solid-liquid interface on oxide surfaces was studied using a quartz crystal microbalance with dissipation monitoring (QCM-D). The impact of the hydrophobic and electrostatic forces on the adsorption capacity was investigated by different surface, hydrophobicity, and charge properties, and by varying the ionic strength or the pH. The results highlight that hydrophobic forces have higher impacts than electrostatic forces on the Acacia gum adsorption on the oxide surface. The Acacia gum adsorption capacity is higher on hydrophobic surfaces compared to hydrophilic ones and presents a higher stability with negatively charged surfaces. The structural configuration and charge of Acacia gum in the first part of the adsorption process are important parameters. Acacia gum displays an extraordinary ability to adapt to surface properties through rearrangements, conformational changes, and/or dehydration processes in order to reach the steadiest state on the solid surface. Rheological analysis from QCM-D data shows that the A. senegal layers present a viscous behavior on the hydrophilic surface and a viscoelastic behavior on more hydrophobic ones. On the contrary, A. seyal layers show elastic behavior on all surfaces according to the Voigt model or a viscous behavior on the hydrophobic surface when considering the power-law model.

Interfacial Adsorption and Electron Properties of Water Molecule/Cluster on Anatase TiO2(101) Surface: Raman and DFT Investigation

The hydrogen bond network reconstruction at the titanium/water interface was monitored by Raman spectroscopy. In addition, the adsorption properties and the surface electron properties of hydrogen bond cluster (HBC) configurations were analyzed using adsorption energy, work function, Mulliken charge population, and density of states (DOS) by the first-principles method based on density functional theory (DFT). Our results show that the hydrogen bond network of the aqueous solution is reconstructed under the interaction with the anatase TiO₂(101) surface with the transformation of the chain and free hydrogen bonds to complex hydrogen bonds. The adsorption energy of a single water molecule and HBC on the anatase TiO₂(101) surface are the lowest with the 1-DD-h (-0.851 eV) and 3-D-h-DDA (-1.048 eV) configurations, respectively. Over the long term, artificially regulating the structure of the HBC might be an effective and general way to slow down the metal anodic reaction without surface modification. Furthermore, the surface charge concentrates on the bridging oxygen atom, which will be the active site of the interface reaction. It is helpful to clarify the anodic corrosion reaction mechanism of the titanium spontaneous oxide film/water interface.

The response of bioactive titanium surfaces with different structure to UVC-irradiation to eliminate the negative effect on biological properties during aging time

The biological aging of titanium implants affects the service lifetime negatively in clinical applications, and UV irradiation is an applicable method to overcome the biological aging. This study investigated the changes in surface characteristics and biological properties of bioactive titanium surfaces with different structure and topography after UVC-irradiation. The bioactive titanium surfaces were prepared by anodizing (AO), sandblasting and acid-etching (SLA), acid-alkali etching (AA), alkali-heat etching (AH) methods. Samples were stored at dark for 7 weeks to simulate biological aging process and then irradiated by UVC for 2 hours. The results showed that the Ti-OH groups, which are crucial to enhance the biological properties, were easier to be generated on AO surfaces by UVC-irradiation, o owing to a mixture of anatase and rutile on surfaces. UVC-irradiation had the strongest effect on AO surfaces to enhance the bioactivity in bone-like apatite deposition and better biocompatibility in MSCs attachment and proliferation. Therefore, titanium surfaces with a mixture phase of anatase and rutile has the potential to effectively utilize the benefits of UVC-irradiation to overcome the negative effects of the biological aging and have a promising clinical application prospect.

Bioactive Coatings on Titanium: A Review on Hydroxylation, Self-Assembled Monolayers (SAMs) and Surface Modification Strategies

Titanium (Ti) and its alloys have been demonstrated over the last decades to play an important role as inert materials in the field of orthopedic and dental implants. Nevertheless, with the widespread use of Ti, implant-associated rejection issues have arisen. To overcome these problems, antibacterial properties, fast and adequate osseointegration and long-term stability are essential features. Indeed, surface modification is currently presented as a versatile strategy for developing Ti coatings with all these challenging requirements and achieve a successful performance of the implant. Numerous approaches have been investigated to obtain stable and well-organized Ti coatings that promote the tailoring of surface chemical functionalization regardless of the geometry and shape of the implant. However, among all the approaches available in the literature to functionalize the Ti surface, a promising strategy is the combination of surface pre-activation treatments typically followed by the development of intermediate anchoring layers (self-assembled monolayers, SAMs) that serve as the supporting linkage of a final active layer. Therefore, this paper aims to review the latest approaches in the biomedical area to obtain bioactive coatings onto Ti surfaces with a special focus on (i) the most employed methods for Ti surface hydroxylation, (ii) SAMs-mediated active coatings development, and (iii) the latest advances in active agent immobilization and polymeric coatings for controlled release on Ti surfaces.

Nanostructured Modifications of Titanium Surfaces Improve Vascular Regenerative Properties of Exosomes Derived from Mesenchymal Stem Cells: Preliminary In Vitro Results

(1) Background: Implantation of metal-based scaffolds is a common procedure for treating several diseases. However, the success of the long-term application is limited by an insufficient endothelialization of the material surface. Nanostructured modifications of metal scaffolds represent a promising approach to faster biomaterial osteointegration through increasing of endothelial commitment of the mesenchymal stem cells (MSC). (2) Methods: Three different nanotubular Ti surfaces (TNs manufactured by electrochemical anodization with diameters of 25, 80, or 140 nm) were seeded with human MSCs (hMSCs) and their exosomes were isolated and tested with human umbilical vein endothelial cells (HUVECs) to assess whether TNs can influence the secretory functions of hMSCs and whether these in turn affect endothelial and osteogenic cell activities in vitro. (3) Results: The hMSCs adhered on all TNs and significantly expressed angiogenic-related factors after 7 days of culture when compared to untreated Ti substrates. Nanomodifications of Ti surfaces significantly improved the release of hMSCs exosomes, having dimensions below 100 nm and expressing CD63 and CD81 surface markers. These hMSC-derived exosomes were efficiently internalized by HUVECs, promoting their migration and differentiation. In addition, they selectively released a panel of miRNAs directly or indirectly related to angiogenesis. (4) Conclusions: Preconditioning of hMSCs on TNs induced elevated exosomes secretion that stimulated in vitro endothelial and cell activity, which might improve in vivo angiogenesis, supporting faster scaffold integration.

Contact Angle Relaxation on Amorphous, Mixed-Phase (Anatase + Rutile), and Anatase TiO2 Films and Its Mechanism

TiO₂ films generally undergo contact angle relaxation in the dark. It has been suggested that carbon contamination and the loss of surface OH generated by UV may be the major causes. However, the mechanisms for the long-lasting hydrophilicity have not been fully understood. Here, we studied contact angle relaxation of amorphous, mixed-phase, and anatase, and a new mechanism is proposed. After UV exposure and oxygen plasma treatment, the films' relaxation was observed over short-term (1 day) and long-term (>30 days) scales with XPS analysis using two quantitative parameters: relative amount and binding energy (B.E.) shifting. One day after plasma treatment, we observed that the donor-acceptor complex (DAC) and Ti-OH peaks of anatase shifted toward lower B.E., while the other films showed no shift or positive B.E. shifting. Interestingly, the relaxation of the amorphous and mixed-phase TiO₂ occurred over time despite the large number of total OH groups (I_OH/I_bulk > 75%) and DAC (I_DAC/I_bulk > 110%), and only the anatase film showed superhydrophilicity (∼10°) for 90 days. Also, the B.E. of all OH peaks increased over time, indicating that polarizable hydroxyls relaxed in the dark. Although the greater binding strength of Ti-OH and DAC on the anatase surface maintains long-lasting hydrophilicity, the loss of polarizable OH causes relaxation on the less-reactive TiO₂ films. Carbon contamination can also contribute to the relaxation over time. Taken together, we conclude that the surface energy, polarizable OH, and contaminants are the major factors affecting relaxation; this study gives a full picture of the mechanism integrated over some of the previously reported models.

Superhydrophilic Fe3+ Doped TiO2 Films with Long-Lasting Antifogging Performance

Based on the superhydrophilicity of titanium dioxide (TiO₂) after ultraviolet irradiation, it has a high potential in the application of antifogging. However, a durable superhydrophilic state and a broader photoresponse range are necessary. Considering the enhancement of the photoresponse of TiO₂, doping is an effective method to prolong the superhydrophilic state. In this paper, a Fe³⁺ doped TiO₂ film with long-lasting superhydrophilicity and antifogging is prepared by sol-gel method. The experiment and density-functional theory (DFT) calculations are performed to investigate the antifogging performance and the underlying microscopic mechanism of Fe³⁺ doped TiO₂. Antifogging tests demonstrate that 1.0 mol % Fe³⁺ doping leads to durable antifogging performance which lasts 60 days. The DFT calculations reveal that the Fe³⁺ doping can both increase the photolysis ability of TiO₂ under sunlight exposure and enhance the stability of the hydroxyl adsorbate on TiO₂ surface, which are the main reasons for a long-lasting superhydrophilicity of TiO₂ after sunlight exposure.

Anatase versus Triphasic TiO2: Near-identical synthesis and comparative structure-sensitive photocatalytic degradation of methylene blue and 4-chlorophenol

Studies on photocatalytic activity of monophasic and biphasic TiO₂ have been well explored. However, detailed studies on the photocatalytic activity of triphasic titania, as opposed to monophasic or biphasic TiO₂ are scarce. Here we report a comparative structure-sensitive photocatalytic study of triphasic versus anatase TiO₂, both have been synthesized under near-identical conditions through a customized sol-gel approach. The composition of the phases is tuned just by varying the thermal pre-treatment conditions of TiO₂ gel that has been subsequently subjected to calcination at 300 °C. Interestingly, when the pre-treatment temperature of the gel is systematically increased from 50 to 250 °C, a transition from anatase to triphasic (anatase, rutile, and brookite) and then again to anatase has been observed. The synthesized TiO₂ phase compositions have been thoroughly characterized for their structural, optical, electrical, surface and morphological properties. Among the different phase compositions, triphasic titania having a significant proportion of rutile has been found to exhibit the highest photocatalytic activity, as probed using model organic pollutants, Methylene Blue (MB) and 4-Chlorophenol (4-CP). In addition to the earlier known factors such as effective heterojunction, and favorable position of the valence band (VB), an important contribution to the high photocatalytic activity of triphasic TiO₂ has been experimentally found to stem from the additional electron density in VB that is attributed to the lattice contraction of anatase phase owing to the coexistence of other two phases. The study provides fundamental insights into the energetics that impact the photocatalytic activity of triphasic versus anatase TiO₂.

Wetting Properties of Transparent Anatase/Rutile Mixed Phase Glancing Angle Magnetron Sputtered Nano-TiO2 Films

Transparent polycrystalline TiO2 thin films have been deposited on unheated glass substrates using RF reactive magnetron sputtering. Depositions were carried out at different glancing angles and with different total gas mixture pressures. The variation of these parameters affected the crystal phase composition and the surface morphology. Depending on the glancing angle and the pressure, rutile, mixed anatase/ rutile and pure anatase were deposited at low substrate temperature. Both hydrophilic and hydrophobic TiO2 were obtained, exhibiting fast photoconversion to superhydrophilic upon UV irradiation. The effect of the materials physicochemical properties on the wettability and rate of the UV induced superhydrophilicity is evaluated.