Controlling the Spatial Distribution of Solubilized Compounds within Copolymer Micelles

Inside Block Copolymer Micelles-Tracing Interfacial Influences on Crosslinking Efficiency in Nanoscale Confined Spaces

Recently, several studies have demonstrated the excellent capabilities of tip-enhanced Raman spectroscopyfor in-depth investigations of structural properties of matter with unprecedented resolution and chemical specificity. These capabilities are utilized here to study the internal structure of core-crosslinked micelles, which are formed by self-assembly of the diblock terpolymer poly(ethylene oxide)-block-poly(furfuryl glycidylether-co-tert-butylglycidyl ether). Supplementing force-volume atomic force microscopy experiments address additionally the nanomechanical properties. Particularly, TERS enables investigating the underlying principles influencing the homogeneity and efficiency of the Diels-Alder core-crosslinking process in the confined hydrophobic core. While the central core region is homogenously crosslinked, a breakdown of the crosslinking reaction is observed in the core-corona interfacial region. The results corroborate that a strong crosslinking efficiency is directly correlated to the formation of a mixed zone of the glycidyl ether and PEO corona blocks reaching ≈5 nm into the core region. Concomitantly a strong exclusion of the encapsulated bismaleimide crosslinker from the interfacial region is observed. It is conceivable that a changed structure, chemical composition and altered nanomechanical properties of this interfacial region may also influence the crosslinking efficiency across the entire core region by a modification of the solubility of the crosslinker in the interfacial core-corona region.

Impact of poly(ethylene glycol) functionalized lipids on ordering and fluidity of colloid supported lipid bilayers

Colloid supported lipid bilayers (CSLBs) are highly appealing building blocks for functional colloids. In this contribution, we critically evaluate the impact on lipid ordering and CSLB fluidity of inserted additives. We focus on poly(ethylene glycol) (PEG) bearing lipids, which are commonly introduced to promote colloidal stability. We investigate whether their effect on the CSLB is related to the incorporated amount and chemical nature of the lipid anchor. To this end, CSLBs were prepared from lipids with a low or high melting temperature (T_m), DOPC, and DPPC, respectively. Samples were supplemented with either 0, 5 or 10 mol% of either a low or high T_m PEGylated lipid, DOPE-PEG₂₀₀₀ or DSPE-PEG₂₀₀₀, respectively. Lipid ordering was probed via differential scanning calorimetry and fluidity by fluorescence recovery after photobleaching. We find that up to 5 mol% of either PEGylated lipids could be incorporated into both membranes without any pronounced effects. However, the fluorescence recovery of the liquid-like DOPC membrane was markedly decelerated upon incorporating 10 mol% of either PEGylated lipids, whilst insertion of the anchoring lipids (DOPE and DSPE without PEG₂₀₀₀) had no detectable impact. Therefore, we conclude that the amount of incorporated PEG stabilizer, not the chemical nature of the lipid anchor, should be tuned carefully to achieve sufficient colloidal stability without compromising the membrane dynamics. These findings offer guidance for the experimental design of studies using CSLBs, such as those focusing on the consequences of intra- and inter-particle inhomogeneities for multivalent binding and the impact of additive mobility on superselectivity.

Amphiphilic proteins coassemble into multiphasic condensates and act as biomolecular surfactants

Cells contain membraneless compartments that assemble due to liquid-liquid phase separation, including biomolecular condensates with complex morphologies. For instance, certain condensates are surrounded by a film of distinct composition, such as Ape1 condensates coated by a layer of Atg19, required for selective autophagy in yeast. Other condensates are multiphasic, with nested liquid phases of distinct compositions and functions, such as in the case of ribosome biogenesis in the nucleolus. The size and structure of such condensates must be regulated for proper biological function. We leveraged a bioinspired approach to discover how amphiphilic, surfactant-like proteins may contribute to the structure and size regulation of biomolecular condensates. We designed and examined families of amphiphilic proteins comprising one phase-separating domain and one non-phase-separating domain. In particular, these proteins contain the soluble structured domain glutathione S-transferase (GST) or maltose binding protein (MBP), fused to the intrinsically disordered RGG domain from P granule protein LAF-1. When one amphiphilic protein is mixed in vitro with RGG-RGG, the proteins assemble into enveloped condensates, with RGG-RGG at the core and the amphiphilic protein forming the surface film layer. Importantly, we found that MBP-based amphiphiles are surfactants and influence droplet size, with increasing surfactant concentration resulting in smaller droplet radii. In contrast, GST-based amphiphiles at increased concentrations coassemble with RGG-RGG into multiphasic structures. We propose a mechanism for these experimental observations, supported by molecular simulations of a minimalist model. We speculate that surfactant proteins may play a significant role in regulating the structure and function of biomolecular condensates.

Co-assembly of precision polyurethane ionomers reveals role of and interplay between individual components

Industrial and household products, such as paints, inks and cosmetics usually consist of mixtures of macromolecules that are disperse in composition, in size and in monomer sequence. Identifying structure-function relationships for these systems is complicated, as particular macromolecular components cannot be investigated individually. For this study, we have addressed this issue, and have synthesized a series of five sequence-defined polyurethanes (PUs): one neutral-hydrophobic, one single-charged hydrophilic, one single-charged hydrophobic and two double-charged amphiphilic PUs (one symmetric and one asymmetric). These novel precision PUs - that were prepared by using stepwise coupling-deprotection synthetic protocols - have a defined composition, size and monomer sequence, where the chosen sequences were inspired by those that are abundantly formed in the production of industrial waterborne PU dispersions. By performing dynamic light scattering experiments (DLS), self-consistent field (SCF) computations and cryogenic transmission electron microscopy (cryo-TEM), we have elucidated the behavior in aqueous solution of the individual precision PUs, as well as of binary and ternary mixtures of the PU sequences. The double-charged PU sequences ('hosts') were sufficiently amphiphilic to yield single-component micellar solutions, whereas the two more hydrophobic sequences did not micellize on their own, and gave precipitates or ill-defined larger aggregates. Both the neutral-hydrophobic PU and the hydrophilic single-charged PU were successfully incorporated in the host micelles as guests, respectively increasing and reducing the micelle radius upon incorporation. SCF computations indicated that double-charged symmetric PUs stretch whilst double-charged asymmetric PUs are expelled from the core to accommodate hydrophobic PU guests within the micelles. For the ternary mixture of the double-charged symmetric and asymmetric hosts and the neutral-hydrophobic guest we have found an improved colloidal stability, as compared to those for binary mixtures of either host and hydrophobic guest. In another ternary mixture of precision PUs, with all three components not capable of forming micelles on their own, we see that the ensemble of molecules produces stable micellar solutions. Taken together, we find that the interplay between PU-molecules in aqueous dispersions promotes the formation of stable micellar hydrocolloids.

Coarse graining and adsorption in bottlebrush-colloid mixtures

We study the adsorption properties in bottlebrush/colloid binary mixtures by combining scaling theories, theoretical predictions, self-consistent field computations (SCFC), and molecular dynamics simulations. In particular, we focus on adsorption in the case in which an attraction is set between the two species, by analysing the solution properties for a range of interactions and the size ratio between colloids and bottlebrushes, in the case in which colloids are smaller than the macromolecules. We show that the onset of adsorption is dominated by the local properties of the adsorbing guest particle. This allows us to use the local similarity between a cylindrical bottlebrush and a spherical star polymer to predict the region of the parameter space in which the adsorption takes place. By employing simple scaling arguments, we thus extend the analytical results on the adsorption obtained for binary mixtures of star polymers/colloid nanoparticles. We then validate our predictions with molecular dynamics simulations. Moreover, by means of SCFC, we assess the adsorption-to-depletion transition of nanoparticles in polymeric bottlebrushes. Our results pave the road towards a smart rational design and coarse-graining of adsorbing/releasing systems, where an elongated shape might play an important role.

Understanding the Synergistic Correlation between the Spatial Distribution of Drug-Loaded Mixed Micellar Systems and In Vitro Behavior via Experimental and Computational Approaches

To better promote the application of polymeric mixed micelles (PMMs), a coarse-grained molecular dynamics simulation (CGMD) has been employed to investigate the factors controlling the spatial distribution within the PMMs and predict their drug-loading properties, meanwhile, combined with experimental methods to validate and examine it. In this study, the snapshots obtained from CGMD and the results of proton nuclear magnetic resonance (¹H NMR) and transmission electron microscopy (TEM) provide new insights into the distribution principle that the spatial distribution depends on the hydrophobic compatibility of drugs with the regions within PMMs. Docetaxel (DTX) is located within the interior or near the core-corona interface of the HS15 hydrophobic core inside FS/PMMs (PMMs fabricated from a nonionic triblock copolymer (F127)) and a nonionic surfactant (HS15), and therefore, the system with a high HS15 ratio, such as system I, is more suitable for loading DTX. In contrast, the more water-soluble puerarin (PUE) is more likely to be solubilized in the "secondary hydrophobic area," mainly formed by the hydrophobic part of F127 within FS/PMMs. However, when the initial feeding concentration of the drug is increased or the FS mixing ratios are changed, an inappropriate distribution would occur and hence influence the drug-loading stability. Also, this impact was further elucidated by the calculated parameters (solvent-accessible surface area (SASA), the radius of gyration (R_g), and energy landscape), and the analysis of the drug leakage, concluding that inappropriate distribution of the drug would lower the stability of the drug in the PMMs. These results combined together provide new insights into the distribution principle that the spatial distribution of drugs within PMMs depends on the hydrophobic compatibility of drugs with the regions formed by micellar materials. Additionally, in vitro drug release yielded a consistent picture with the above conclusions and provides evidence that both the location of the drug within the systems and the stability of the drug-loading system have a great influence on the drug release behavior. Accordingly, this work demonstrates that we can tune the drug-loading stability and drug release behavior via the drug-PMM interaction and drug location study, and CGMD technology would be a step forward in the search for suitable drug-delivery PMMs.

(Homo)polymer-mediated colloidal stability of micellar solutions

Despite their wide range of applications, there is a remarkable lack of fundamental understanding about how micelles respond to other components in solution. The colloidal stability of micellar solutions in presence of (homo)polymers is investigated here following a theoretical bottom-up approach. A polymer-mediated micelle-micelle interaction is extracted from changes in the micelle-unimer equilibrium as a function of the inter-micelle distance. The homopolymer-mediated diblock copolymer micelle-micelle interaction is studied both for depletion and adsorption of the homopolymer. The fluffy nature of the solvophilic domain (corona) of the micelle weakens the depletion-induced destabilization. Accumulation of polymers into the corona induces bridging attraction between micelles. In fact, both depletion and adsorption phenomena are regulated by the coronal thickness relative to the size of the added polymer. Penetration of guest compounds into the coronal domain of crew-cut micelles, with a narrower yet denser corona, is less pronounced as for starlike micelles (with a more diffuse corona). Therefore, crew-cut micelles are less sensitive to the effect of added compounds, and hence more suitable for applications in multicomponent systems, such as industrial formulations or biological fluids. The trends observed for the colloidal stability of crew-cut micelles qualitatively match with our experimental observations on aqueous dispersions of polycaprolactone-polyethylene glycol (PCL-PEO) micellar suspensions with added PEO chains.

Dual responsive PMEEECL–PAE block copolymers: a computational self-assembly and doxorubicin uptake study

The self-assembly behaviour of dual-responsive block copolymers and their ability to solubilize the anticancer drug doxorubicin (DOX) has been investigated using all-atom molecular dynamics (MD) simulations, MARTINI coarse-grained (CG) force field simulation and Scheutjens–Fleer self-consistent field (SCF) computations. These diblock copolymers, composed of poly{γ-2-[2-(2-methoxyethoxy)ethoxy]ethoxy-ε-caprolactone} (PMEEECL) and poly(β-amino ester) (PAE) are dual-responsive: the PMEEECL block is thermoresponsive (becomes insoluble above a certain temperature), while the PAE block is pH-responsive (becomes soluble below a certain pH). Three MEEECL₂₀–AE_M compositions with M = 5, 10, and 15, have been studied. All-atom MD simulations have been performed to calculate the coil-to-globule transition temperature (T_cg) of these copolymers and finding appropriate CG mapping for both PMEEECL–PAE and DOX. The output of the MARTINI CG simulations is in agreement with SCF predictions. The results show that DOX is solubilized with high efficiency (75–80%) at different concentrations inside the PMEEECL–PAE micelles, although, interestingly, the loading efficiency is reduced by increasing the drug concentration. The non-bonded interaction energy and the RDF between DOX and water beads confirm this result. Finally, MD simulations and SCF computations reveal that the responsive behaviour of PMEEECL–PAE self-assembled structures take place at temperature and pH ranges appropriate for drug delivery.

The self-assembly behaviour of dual-responsive block copolymers and their ability to solubilize the drug doxorubicin is demonstrated using molecular dynamics simulations, coarse-grained force field simulations and self-consistent field theory.

Effects of crystallinity and dispersity on the self-assembly behavior of block co-oligomers in water

Dispersity and crystallinity affect the dimensions of lamellar structures formed by amphiphilic block co-oligomers in water as well as the reproducibility of sample formation; spherical and cylindrical morphologies are less affected.

Switch It Inside-Out: "Schizophrenic" Behavior of All Thermoresponsive UCST-LCST Diblock Copolymers

This feature article reviews our recent advancements on the synthesis, phase behavior, and micellar structures of diblock copolymers consisting of oppositely thermoresponsive blocks in aqueous environments. These copolymers combine a nonionic block, which shows lower critical solution temperature (LCST) behavior, with a zwitterionic block that exhibits an upper critical solution temperature (UCST). The transition temperature of the latter class of polymers is strongly controlled by its molar mass and by the salt concentration, in contrast to the rather invariant transition of nonionic polymers with type II LCST behavior such as poly(N-isopropylacrylamide) or poly(N-isopropyl methacrylamide). This allows for implementing the sequence of the UCST and LCST transitions of the polymers at will by adjusting either molecular or, alternatively, physical parameters. Depending on the location of the transition temperatures of both blocks, different switching scenarios are realized from micelles to inverse micelles, namely via the molecularly dissolved state, the aggregated state, or directly. In addition to studies of (semi)dilute aqueous solutions, highly concentrated systems have also been explored, namely water-swollen thin films. Concerning applications, we discuss the possible use of the diblock copolymers as "smart" nanocarriers.

An industry update in therapeutics: what is the latest news?

This industry update covers March of 2019 and describes the most representative examples of research mainly focused on cancer, diabetes, cholesterol-lowering drugs, Parkinson’s disease, ischemia and regeneration of heart muscle. A new method for designing encapsulation process and a new in vitro model of oral cavity were also described. In this update, there was a clear positive approval tendency for several companies. Those companies offered innovative therapeutic candidates or in some cases extension of indications. Some patents related to therapeutic fields like lung cancer, diabetes, scleroderma, multiple sclerosis and hypogonadism were also published during this month. Information was sourced from websites, pharma press releases, regulatory and patent agencies, and available scientific literature.