Lipid-Surrounding Water Molecules Probed by Time-Resolved Emission Spectra of Laurdan

A Quantitative Approach to Characterize the Surface Modification on Nanoparticles Based on Localized Dielectric Environments

Nanoparticles (NPs) are utilized for the functionalization of composite materials and nanofluids. Although oxide NPs (e.g., silica (SiO2)) exhibit less dispersibility in organic solvents or polymers due to their hydrophilic surface, the surface modification using silane coupling agents can improve their dispersibility in media with low dielectric constants. Herein, SiO2 NPs were functionalized using octyltriethoxysilane (OTES, C8) and dodecyltriethoxysilane (DTES, C12), wherein the degrees of surface modification of SiO2@C8 and SiO2@C12 were quantitatively evaluated based on the ratio of modifier to surface silanol group (θ) and the volume fraction of organic modifier to total particle volume (ϕR). The variations of surface properties were revealed by analyzing the Hansen solubility parameters (HSP). Particularly, the surface modification using OTES or DTES significantly affected the polarity (δP) of NPs. The local dielectric environments of surface-modified SiO2 NPs were characterized using a solvatochromic dye, Laurdan. By analyzing the peak position of the steady-state emission spectrum of Laurdan in a NP suspension, the apparent dielectric environments surrounding NPs (εapp) were obtained. A good correlation between ϕR and εapp was observed, indicating that ϕR is a reliable quantity for understanding the properties of surface-modified NPs. Furthermore, the generalized polarization (GP) of NPs was investigated. The surface-modified SiO2 NPs with higher ϕR (≥0.15) exhibited GP > 0, suggesting that the modifiers are well-organized on the surface of NPs. The localized dielectric environment surrounding NPs could be predicted by analyzing the volume fraction of nonpolar moieties derived from modifiers. Alternatively, εapp and GP can be utilized for understanding the properties of inorganic-organic hybrid NPs.

Atomic-scale structure of interfacial water on gel and liquid phase lipid membranes

Hydration of biological membranes is essential to a wide range of biological processes. In particular, it is intrinsically linked to lipid thermodynamic properties, which in turn influence key cell functions such as ion permeation and protein mobility. Experimental and theoretical studies of the surface of biomembranes have revealed the presence of an interfacial repulsive force, which has been linked to hydration or steric effects. Here, we directly characterise the atomic-scale structure of water near supported lipid membranes of 1,2-dimyristoyl-sn-glycero-3-phosphocholine in their gel and liquid phase through three-dimensional atomic force microscopy (3D AFM). First, we demonstrate the ability to probe the morphology of interfacial water of lipid bilayers in both phases with sub-molecular resolution by using ultrasharp tips. We then visualise the molecular arrangement of water at the lipid surface at different temperatures. Our experiments reveal that water is organised in multiple hydration layers on both the solid-ordered and liquid-disordered lipid phases. Furthermore, we observe a monotonic repulsive force, which becomes relevant only in the liquid phase. These results offer new insights into the water structuring near soft biological surfaces, and demonstrate the importance of investigating it with vertical and lateral sub-molecular resolution.

Generalized polarization and time-resolved fluorescence provide evidence for different populations of Laurdan in lipid vesicles

The solvatochromic dye Laurdan is widely used in sensing the lipid packing of both model and biological membranes. The fluorescence emission maximum shifts from about 440 nm (blue channel) in condensed membranes (So) to about 490 nm (green channel) in the liquid-crystalline phase (Lα). Although the fluorescence intensity based generalized polarization (GP) is widely used to characterize lipid membranes, the fluorescence lifetime of Laurdan, in the blue and the green channel, is less used for that purpose. Here we explore the correlation between GP and fluorescence lifetimes by spectroscopic measurements on the So and Lα phases of large unilamellar vesicles of DMPC and DPPC. A positive correlation between GP and the lifetimes is observed in each of the optical channels for the two lipid phases. Microfluorimetric determinations on giant unilamellar vesicles of DPPC and DOPC at room temperature are performed under linearly polarized two-photon excitation to disentangle possible subpopulations of Laurdan at a scale below the optical resolution. Fluorescence intensities, GP and fluorescence lifetimes depend on the angle between the orientation of the linear polarization of the excitation light and the local normal to the membrane of the optical cross-section. This angular variation depends on the lipid phase and the emission channel. GP and fluorescence intensities in the blue and green channel in So and in the blue channel in Lα exhibit a minimum near 90o. Surprisingly, the intensity in the green channel in Lα reaches a maximum near 90o. The fluorescence lifetimes in the two optical channels also reach a pronounced minimum near 90o in So and Lα, apart from the lifetime in the blue channel in Lα where the lifetime is short with minimal angular variation. To our knowledge, these experimental observations are the first to demonstrate the existence of a bent conformation of Laurdan in lipid membranes, as previously suggested by molecular dynamics calculations.

Multiplicity of solvent environments in lipid bilayer revealed by DAS deconvolution of twin probes: Comparative method of Laurdan and Prodan

Laurdan and Prodan were designed for the evaluation of the surrounding hydration state. When inserted into lipid bilayer systems, both probes are located at different positions and their fluorescence properties are drastically varied, depending on their surrounding environment. In this study, a novel method using the above fluorescence probes was proposed on the basis of fluorescence lifetime (τ) and emission peak (λ), called as τ vs. λ plot, determined by global analysis of their multiple fluorescence decays and deconvolution of these decay-associated spectra. According to the evaluation of τ vs. λ plot, the existence of multiple fluorescence components in the membrane was revealed. In addition, their fluorescence distribution properties, described on τ vs. λ plot, of each probe tended to correspond to the phase state and vertical direction of the lipid membrane. To assess the contribution of environmental effect to each distribution, we defined the region in the τ vs. λ plot, which was modeled from a series of solvent mixtures (hexane, acetone, ethanol and water) to emulate the complex environment in the 1,2-dipalmitoyl-sn-glycero-3-phosphocholine bilayer system. The distributions of fluorescence components of Laurdan and Prodan in lipid membranes were classified into each solvent species, and Prodan partition into bulk water was distinguished. The sensitivity of Prodan to the phase pretransition of the 1,2-dipalmitoyl-sn-glycero-3-phosphocholine bilayer system was also observed in increasing the temperature. Noticeably, most of the fluorescence components was assigned to the solvent model, except for a single component that has longer lifetime and shorter emission wavelength. This component was dominant in solid-ordered phase; hence, it is assumed to be a specific component in lipid membranes that cannot be represented by solvents. Although these are still qualitative analytical methods, the unique approach proposed in this study provides novel insights into the multi-focal property of the membrane.

Versatility of the Preparation Method for Macroporous Cryogel Particles Utilizing the Inverse Leidenfrost Effect

We have investigated the versatility of a two-step preparation method, without a detergent, that combines both the inverse Leidenfrost effect and the cryogelation technique by using the macroporous particles of different kinds of monomers (four vinyl monomers) or a natural polymer (agarose). First, the precursor of polymers was dropped into liquid nitrogen to prepare the spherical frozen droplet by the inverse Leidenfrost effect. Second, the frozen droplets were cryo-polymerized at the frozen temperature; then, cryogel particles were prepared after thawing. Subsequently, the basic characteristics of the macroporous polymer particles obtained above were compared, focusing on the appearances, porous morphologies, and mechanical properties. It was found that the similar polymer particles could be obtained by the two-step preparation method, while there was a slight difference in their characteristics, depending on the type of monomers. Especially for the mechanical properties, the cryogel particles of the hydrophilic polymer exhibited a shape memory function with sponge-like elasticity, whereas the hydrophobic polymer particles were observed to be cracked after compression (i.e., no shape memory function). This work provides a versatile method of adopting various kinds of monomers and natural polymers for the preparation of macroporous particles. Hence, the method possibly has a potential to prepare and design "tailor-made" macroporous polymer particles for the application purpose.

Roles of interfacial water states on advanced biomedical material design

When biomedical materials come into contact with body fluids, the first reaction that occurs on the material surface is hydration; proteins are then adsorbed and denatured on the hydrated material surface. The amount and degree of denaturation of adsorbed proteins affect subsequent cell behavior, including cell adhesion, migration, proliferation, and differentiation. Biomolecules are important for understanding the interactions and biological reactions of biomedical materials to elucidate the role of hydration in biomedical materials and their interaction partners. Analysis of the water states of hydrated materials is complicated and remains controversial; however, knowledge about interfacial water is useful for the design and development of advanced biomaterials. Herein, we summarize recent findings on the hydration of synthetic polymers, supramolecular materials, inorganic materials, proteins, and lipid membranes. Furthermore, we present recent advances in our understanding of the classification of interfacial water and advanced polymer biomaterials, based on the intermediate water concept.

Characterization of phase separation phenomena in hybrid lipid/block copolymer/cholesterol bilayers using laurdan fluorescence with log-normal multipeak analysis

Phase separation phenomena in hybrid lipid/block copolymer/cholesterol bilayers combining polybutadiene-block-polyethylene oxide (PBdPEO), egg sphingomyelin (egg SM), and cholesterol were studied with fluorescence spectroscopy and microscopy for comparison to lipid bilayers composed of palmitoyl oleoyl phosphatidylcholine (POPC), egg SM, and cholesterol. Laurdan emission spectra were decomposed into three lognormal curves. The temperature dependence of the ratios of the areas of the middle and lowest energy peaks revealed temperature break-point (T_break) values that were in better agreement, compared to generalized polarization inflection temperatures, with phase transition temperatures in giant unilamellar vesicles (GUVs). Agreement between GUV and spectroscopy results was further improved for hybrid vesicles by using the ratio of the area of the middle peak to the sum of the areas all three peaks to find the T_break values. For the hybrid vesicles, trends at T_break are hypothesized to be correlated with the mechanisms by which the phase transition takes place, supported by the compositional range as well as the morphologies of domains observed in GUVs. Low miscibility of PBdPEO and egg SM is suggested by the finding of relatively high T_break values at cholesterol contents greater than 30 mol%. Further, GUV phase behavior suggests stronger partitioning of cholesterol into PBdPEO than into POPC, and less miscibility of PBdPEO than POPC with egg SM. These results, summarized using a heat-map, contribute to the limited body of knowledge regarding the effect of cholesterol on hybrid membranes, with potential application toward the development of such materials for drug delivery or membrane protein reconstitution.

Role of Negatively Charged Lipids Achieving Rapid Accumulation of Water-Soluble Molecules and Macromolecules into Cell-Sized Liposomes against a Concentration Gradient

Liposomes, molecular self-assemblies resembling biological membranes, are a promising scaffold to investigate the physicochemical logic behind the complexity of living cells. Despite elaborate synthetic studies constructing cell-like chemical systems using liposomes, less attention has been paid to the proactive role of the membrane emerging as dynamics of the molecular self-assembly. This study investigated the liposomes containing anionic phospholipids by exposing them to steady flow conditions using a newly constructed automatic microfluidic observation platform. We demonstrated that the liposomes accumulated even macromolecules under the microfluidic condition without pore formation. By investigating the effect of composition of liposomes and visualizing negatively charged phospholipids upon the flow, we presumed that the external flow caused a compositional asymmetry of anionic phospholipids between the inner/outer leaflets, and the asymmetry enabled a rapid accumulation of those molecules against the concentration gradient. The current study opens new research interests regarding the nature of biological membranes under steady flow conditions.

Effect of bound water content on cell adhesion strength to water-insoluble polymers

Adhesion of cells on biomaterials plays an essential role in modulating cellular functions. Although hydration of biomaterials occurs under biological conditions, it is challenging to systematically evaluate the correlation of hydrated water content in biomaterials with the cell adhesion strength. In this report, we investigated the effect of bound water content on the adhesion strength of cells on poly(2-methoxyethyl acrylate) (PMEA) analogue substrates. Water-insoluble PMEA analogues were synthesized to fabricate substrates with a systemically controlled bound water content. To assess the surface properties of their substrates, contact angle measurement, atomic force microscopy (AFM), and fluorescence measurement were conducted. To reflect the effect of bound water of PMEA analogues, the relationship between the bound water content and cell adhesion behavior was evaluated under serum-free condition. From the single cell force spectrometry (SCFS) and microscopic analysis, it revealed that the increment of bound water content on the substrates decreased cell adhesion strength and cell spreading on the substrates. The bound water content exhibited a good correlation with adhesion strength, spreading area, circularity, and aspect ratio of cells. Our findings indicate that the bound water content could contribute to the development of a novel biomaterial and evaluation of cell behaviors on biomaterials. STATEMENT OF SIGNIFICANCE: For coordinating cell functions, such as growth, mobility, and differentiation, modulating the adhesion strength between cells and their environments is important. Although the hydration to biomaterials has been reported to be closely related to a antifouling property, the effect of hydration water on the cell adhesion behavior is not well understood. We present the first demonstration of essential relationship between cell adhesion strength and hydrated water on a biomaterials surface using the water-insoluble polymers with different hydrated water content. The results reveal that the hydrated water content of polymer substrates strong correlation with adhesion strength of cells. Collectively, the hydrated water content of the biomaterials will be a predominant factor affecting the cell adhesion strength and behavior.

Sensing Hydration of Biomimetic Cell Membranes

Biological membranes play a vital role in cell functioning, providing structural integrity, controlling signal transduction, and controlling the transport of various chemical species. Owing to the complex nature of biomembranes, the self-assembly of lipids in aqueous media has been utilized to develop model systems mimicking the lipid bilayer structure, paving the way to elucidate the mechanisms underlying various biological processes, as well as to develop a number of biomedical and technical applications. The hydration properties of lipid bilayers are crucial for their activity in various cellular processes. Of particular interest is the local membrane dehydration, which occurs in membrane fusion events, including neurotransmission, fertilization, and viral entry. The lack of universal technique to evaluate the local hydration state of the membrane components hampers understanding of the molecular-level mechanisms of these processes. Here, we present a new approach to quantify the hydration state of lipid bilayers. It takes advantage of the change in the lateral diffusion of lipids that depends on the number of water molecules hydrating them. Using fluorescence recovery after photobleaching technique, we applied this approach to planar single and multicomponent supported lipid bilayers. The method enables the determination of the hydration level of a biomimetic membrane down to a few water molecules per lipid.

Modulation of the Belousov-Zhabotinsky Reaction with Lipid Bilayers: Effects of Lipid Head Groups and Membrane Properties

The Belousov-Zhabotinsky (BZ) reaction is an oscillating reaction due to periodic oscillations that happen in the concentration of some intermediates. Such systems can be applied together with hydrophobic membranes to create an autonomous behavior in artificial systems. However, because of a complex set of reactions happening in such systems, the interferences caused by hydrophobic membranes are not easily understood. In this study, we tested lipid membranes composed of trimethylammonium-propane (TAP) and phosphate (PA) lipids in an attempt to break down how the polar region of phosphatidylcholine (PC) lipid membranes affect the BZ reaction. According to our findings, the trimethylammonium group and membrane fluidity are crucial to change the frequency of oscillations in the reaction. In addition, the results also indicate a possible complexation of cerium ions with membranes with a phosphate head group.

Systematic Characterization of Nanostructured Lipid Carriers from Cetyl Palmitate/Caprylic Triglyceride/Tween 80 Mixtures in an Aqueous Environment

Nanostructured lipid carriers (NLCs) are gaining attention as the new generation of lipid vehicles. These carriers consist of saturated lipids with small drops of liquid oil dispersed into the inner lipid matrix and are stabilized by a surfactant. Conventionally, NLC-based drug delivery systems have been widely studied, and many researchers are looking into the composition of NLC properties to improve the performance of NLCs. The membrane fluidity and polarity of self-assembling lipids are also essential properties that must be affected by membrane compositions; however, such fundamental characteristics have not been studied yet. In this study, NLCs were prepared from cetyl palmitate (CP), caprylic triglyceride (CaTG), and Tween 80 (T80). Structural properties, such as particle size and ζ-potential of the CP/CaTG/T80 ternary mixtures, were investigated. Then, the systematic characterization of self-assembly properties using fluorescence-based analysis was applied for the first time to the NLC system. As a final step, the ternary diagram was developed based on the self-assembly properties to summarize the possible structures formed at different compositions. The results showed four states: micelle-like, oil-in-water (O/W) emulsion-like, solid lipid nanoparticle-like, and intermediate (solid-liquid coexistence). For the purpose of making the lipid matrix more liquified, the heterogeneous state and the disordered state of the O/W emulsion-like structure might fulfill the criteria of NLCs. Finally, the ternary diagram provides new information about the assembly state of NLC constituents that could become an important reference for developing high-performance NLCs.

Changes Caused by Liposomes to the Belousov-Zhabotinsky Reaction

The Belousov-Zhabotinsky (BZ) reaction has been applied to give autonomous dynamic behaviors to artificial systems. This reaction is conducted in an aqueous system, but it produces some hydrophobic intermediates, such as bromine. On the basis of previous works about reactions in the lipid bilayer, we investigated how liposome membranes (water-oil interface) affect the BZ reaction. Herein diacylglycerophosphocholine (PC) molecules with a variety of hydrocarbon tails were selected as components of liposomes, and the BZ reaction in the presence of the liposomes was characterized. As a result, membrane fluidity was the main characteristic leading to changes in the reaction behavior. The decrease of the frequency of oscillations was relevant to membrane fluidity, suggesting the interaction of bromine species in the hydrophobic site of the liposomes. In addition, the heterogeneous membrane (s_o+l_d) of DMPC showed a fast decrease in the amplitude of oscillations. Conclusively, characteristics of the hydrophobic environment play a role in the reaction.

A Multiparametric Fluorescence Probe to Understand the Physicochemical Properties of Small Unilamellar Lipid Vesicles in Poly(ethylene glycol)-Water Medium

FDAPT (2-formyl-5-(4'-N,N-dimethylaminophenyl)thiophene) efficiently senses the minimum alteration of lipid bilayer microenvironment with all six different fluorescence parameters namely emission wavelength, fluorescence intensity, steady-state anisotropy, and their corresponding time-dependent parameters (Sahu et al., J. Phys. Chem. B 2018, 122, 7308-7318). In the present work, the effect of poly(ethylene glycol) on the small unilamellar vesicle is demonstrated with the emission behavior of the FDAPT probe. A medium and a high molecular weight PEG were chosen to perturb the lipid vesicles. The alteration of the bilayer polarity, water content inside bilayer, lipid packing density in the perturbed vesicles reflect significant changes in different fluorescence parameters of FDAPT probe. The effect of PEG on the unilamellar vesicle was rationalized with the alteration of the emission behavior, fluorescence lifetime, steady-state anisotropy and anisotropy decay of the probe. The simple and convenient fluorescence measurements provide new insights into the effect of PEG on the packing density, water volume, micro polarity, and microviscosity of the small unilamellar vesicle. The physiological understanding was extended to rationalize the cryoprotecting behavior of PEG.

Evaluation of Molecular Ordering in Bicelle Bilayer Membranes Based on Induced Circular Dichroism Spectra

Bicelles are submicrometer-sized disc-shaped molecular self-assemblies that can be obtained in aqueous solution by dispersing mixtures of certain amphiphiles. Although phospholipid bicelle and phospholipid vesicle assemblies adopt similar lipid bilayer structures, the differences in bilayer characteristics, especially physicochemical properties such as bilayer fluidity, are not clearly understood. Herein, we report the lipid ordering properties of bicelle bilayer membranes based on induced circular dichroism (ICD) and fluorescence polarization analyses using 1,6-diphenyl-1,3,5-hexatriene (DPH) as a probe. Bicelles were prepared by using 1,2-dimyristoyl-sn-glycero-3-phosphocholine (DMPC) and 1,2-dihexanoyl-sn-glycero-3-phosphocholine (DHPC), while pure DMPC vesicles and pure DHPC micelles were used as references. At temperatures below the phase transition temperature of DMPC, the bicelles showed lower membrane fluidities, whereas DHPC micelles showed higher membrane fluidity, suggesting no significant differences in bilayer fluidity between the bicelle and vesicle assemblies. The ICD signals of DPH were induced only when the membrane was in ordered (solid-ordered or ripple-gel) phases. In the bicelle systems, the ICD of DPH was more significant than that of the DMPC vesicle. The induced chirality of DPH was dependent on the chirality of the bilayer lipid. Compared to that of the DMPC/DHPC bicelle, the ICD of the 1,2-dipalmitoyl-sn-glycero-3-phosphocholine/DHPC bicelle was higher, while that of the bovine sphingomyelin/DHPC bicelle was lower. Because the lipids are tightly packed in the ordered phase, the ICD intensity reflects the molecular ordering state of the lipids in the bicelle bilayer.

Modulation of Interfacial Hydration by Carbonyl Groups in Lipid Membranes

The lack of carbonyl groups and the presence of ether bonds give the lipid interphase a different water organization around the phosphate groups that affects the compressibility and electrical properties of lipid membranes. Generalized polarization of 1,2-di-O-tetradecyl-sn-glycero-3-phosphocholine (14:0 diether PC) in correlation with Fourier transform infrared (FTIR) analysis indicates a higher level of polarizability of water molecules in the membrane phase around the phosphate groups both below and above T_m. This reorganization of water promotes a different response in compressibility and dipole moment of the interphase, which is related to different H bonding of water molecules with phosphates (PO) and carbonyl (CO) groups.