Theoretical and Experimental Study of Reversible and Stable Wetting States of a Hierarchically Wrinkled Surface Tuned by Mechanical Strain

Controlled Preparation of Highly Stretchable, Crack-Free Wrinkled Surfaces with Tunable Wetting and Optical Properties

Constructing wrinkles by utilizing strain-driven surface instability in film-substrate systems is a general method to prepare micronano structures, which have a wide range of applications in smart surfaces and devices such as flexible electronics, reversible wetting, friction, and optics. However, cracks generated during the preparation and use process significantly affect the uniformity of wrinkled surfaces and degrade the functional properties of the film devices. The realization of crack-free wrinkles with high stretchability in hard film systems is still a great challenge. Here, we report on a facile technique for controllable preparation of large-area, highly stretchable, crack-free wrinkled surfaces by ultraviolet ozone (UVO) treatment of Ecoflex. The thickness dependence of the wrinkles and the in situ wrinkling process during mechanical loading are investigated. The wrinkles including striped, labyrinth-like, herringbone, and transitional structures are controllable by changing strain mode (uniaxial or biaxial), loading history (simultaneous or sequential), strain anisotropy, and gradient loading. The wrinkled surfaces obtained using UVO-treated Ecoflex have tunable wetting and optical properties and can maintain excellent mechanical stability under large strains. This study provides a facile method for the preparation of large-area, crack-free wrinkles, which is simple, fast, low-cost, and robust. The resulting wrinkled surfaces remain stable under high stretching, which is beneficial for many practical applications, especially in the cases of large strains.

Wrinkled Interfaces: Taking Advantage of Anisotropic Wrinkling to Periodically Pattern Polymer Surfaces

Periodically patterned surfaces can cause special surface properties and are employed as functional building blocks in many devices, yet remaining challenges in fabrication. Advancements in fabricating structured polymer surfaces for obtaining periodic patterns are accomplished by adopting "top-down" strategies based on self-assembly or physico-chemical growth of atoms, molecules, or particles or "bottom-up" strategies ranging from traditional micromolding (embossing) or micro/nanoimprinting to novel laser-induced periodic surface structure, soft lithography, or direct laser interference patterning among others. Thus, technological advances directly promote higher resolution capabilities. Contrasted with the above techniques requiring highly sophisticated tools, surface instabilities taking advantage of the intrinsic properties of polymers induce surface wrinkling in order to fabricate periodically oriented wrinkled patterns. Such abundant and elaborate patterns are obtained as a result of self-organizing processes that are rather difficult if not impossible to fabricate through conventional patterning techniques. Focusing on oriented wrinkles, this review thoroughly describes the formation mechanisms and fabrication approaches for oriented wrinkles, as well as their fine-tuning in the wavelength, amplitude, and orientation control. Finally, the major applications in which oriented wrinkled interfaces are already in use or may be prospective in the near future are overviewed.

Simple Method for Creating Hydrophobic Ultraflexible Photovoltaics

Optoelectronic devices, such as photodetectors and photovoltaics, are susceptible to surface contamination or water damage that can lead to reductions in performance or stability. Applying superhydrophobic coatings to these devices can introduce self-cleaning behavior and water resistance to extend their lifetime and improve their efficiency. However, existing methods for inducing superhydrophobicity have not been compatible with ultraflexible devices because of their thickness and complexity requirements. In this work, we introduce a procedure for inducing superhydrophobic and self-cleaning behavior on ultraflexible components using a combination of shrinkage-induced wrinkles and a low-surface-energy coating. We apply these techniques to an ultraflexible organic photovoltaics and demonstrate excellent hydrophobicity and self-cleaning behavior.

Smart Polymer Surfaces with Complex Wrinkled Patterns: Reversible, Non-Planar, Gradient, and Hierarchical Structures

This review summarizes the relevant developments in preparing wrinkled structures with variable characteristics. These include the formation of smart interfaces with reversible wrinkle formation, the construction of wrinkles in non-planar supports, or, more interestingly, the development of complex hierarchically structured wrinkled patterns. Smart wrinkled surfaces obtained using light-responsive, pH-responsive, temperature-responsive, and electromagnetic-responsive polymers are thoroughly described. These systems control the formation of wrinkles in particular surface positions and the reversible construction of planar-wrinkled surfaces. This know-how of non-planar substrates has been recently extended to other structures, thus forming wrinkled patterns on solid, hollow spheres, cylinders, and cylindrical tubes. Finally, this bibliographic analysis also presents some illustrative examples of the potential of wrinkle formation to create more complex patterns, including gradient structures and hierarchically multiscale-ordered wrinkles. The orientation and the wrinkle characteristics (amplitude and period) can also be modulated according to the requested application.

Non-Fluorinated Flexible Superhydrophobic Surface with Excellent Mechanical Durability and Self-Cleaning Performance

Although plenty of superhydrophobic surfaces have been developed owing to their tremendous potential applications, it is still a great challenge for the superhydrophobic surfaces to possess environmental friendliness, biocompatibility, and mechanical durability simultaneously. Herein, a non-fluorinated flexible superhydrophobic surface was designed by constructing a film-substrate system with labyrinth-like wrinkles combining an intrinsically hydrophobic Zn film and a polydimethylsiloxane (PDMS) substrate. Excellent superhydrophobicity with a contact angle up to 168.5° and a slide angle as low as 0° has been achieved on the Zn/PDMS surface, which is attributed to the micro-/nano-textured structures of the labyrinth-like wrinkles, providing sufficient air pockets to form a stable Cassie-Baxter state. Furthermore, the Zn/PDMS surface retains excellent superhydrophobicity under stretching, bending, and twisting mechanical deformation up to 500 cycles due to the stability of the micro-/nano-textured structures of the labyrinth-like wrinkles protected by the fantastic self-healing ability of the micro-cracks. Additionally, the Zn/PDMS superhydrophobic surface possesses an outstanding self-cleaning performance for various contaminants. The present work provides a valuable routine to design non-fluorinated flexible superhydrophobic surfaces with superb mechanical durability and self-cleaning property as promising functional layers for flexible electronics, wearable devices, biomedical engineering, and so forth.

Controlling line defects in wrinkling: a pathway towards hierarchical wrinkling structures

We demonstrate a novel approach for controlling the line defect formation in microscopic wrinkling structures by patterned plasma treatment of elastomeric surfaces. Wrinkles were formed on polydimethylsiloxane (PDMS) surfaces exposed to low-pressure plasma under uniaxial stretching and subsequent relaxation. The wrinkling wavelength λ can be regulated via the treatment time and choice of plasma process gases (H2, N2). Sequential masking allows for changing these parameters on micron-scale dimensions. Thus, abrupt changes of the wrinkling wavelength become feasible and result in line defects located at the boundary zone between areas of different wavelengths. Wavelengths, morphology, and mechanical properties of the respective areas are investigated by Atomic Force Microscopy and agree quantitatively with predictions of analytical models for wrinkle formation. Notably, the approach allows for the first time the realization of a dramatic wavelength change up to a factor of 7 to control the location of the branching zone. This allows structures with a fixed but also with a strictly alternating branching behavior. The morphology inside the branching zone is compared with finite element methods and shows semi-quantitative agreement. Thus our finding opens new perspectives for "programming" hierarchical wrinkling patterns with potential applications in optics, tribology, and biomimetic structuring of surfaces.

Chiral Graphene Hybrid Materials: Structures, Properties, and Chiral Applications

Chirality has become an important research subject. The research areas associated with chirality are under substantial development. Meanwhile, graphene is a rapidly growing star material and has hard-wired into diverse disciplines. Rational combination of graphene and chirality undoubtedly creates unprecedented functional materials and may also lead to great findings. This hypothesis has been clearly justified by the sizable number of studies. Unfortunately, there has not been any previous review paper summarizing the scattered studies and advancements on this topic so far. This overview paper attempts to review the progress made in chiral materials developed from graphene and their derivatives, with the hope of providing a systemic knowledge about the construction of chiral graphenes and chiral applications thereof. Recently emerging directions, existing challenges, and future perspectives are also presented. It is hoped this paper will arouse more interest and promote further faster progress in these significant research areas.

Theoretical and Experimental Studies on the Controllable Pancake Bouncing Behavior of Droplets

A droplet that impacts on a superhydrophobic surface will undergo a process of unfolding, contracting, and finally rebounding from the surface. With regards to the pancake bouncing behavior of a droplet, since the retraction process of the droplet is omitted, the contact time is greatly shortened compared to the normal type of bouncing. However, the quantitative prediction to the range of droplet pancake bouncing and the adjustment of pancake bouncing state have yet to be probed into. In this paper, we reported the controllable pancake bouncing of droplets by adjusting the size of the superhydrophobic surface with microstructures. In addition, we also discovered a dimensional effect with regards to pancake bouncing, namely, the pancake bouncing would be more likely to happen on the surfaces with large post spacing for the droplet with the larger radius. The contact time could be reduced to 2 ms by adjusting the size of the microstructures and the radius of the droplets. Based on the relationship between the droplet bouncing state and the surface microstructure size, we are able to propose reasonable dimensions for the surfaces in order to control pancake bouncing.