Structure, Morphology, and Rheology of Polyelectrolyte Complex Hydrogels Formed by Self-Assembly of Oppositely Charged Triblock Polyelectrolytes

Dynamic Ion Gels from the Complex Coacervation of Oppositely Charged Poly(ionic liquid)s

A cationic poly(ionic liquid) (PIL) with pendent butyl imidazolium cations and free bis(trifluoromethylsulfonyl)imide (TFSI) anions and an anionic PIL with pendent TFSI anions and free 1-butyl-3-methylimidazolium cations are synthesized by postpolymerization chemical modification and reversible addition-fragmentation chain-transfer radical copolymerization, respectively. Upon mixing solutions of these two PILs in acetone with stoichiometric amounts of ion pairs, ionic exchanges induce coacervation and, after solvent evaporation, lead to the formation of a dynamic ion gel (DIG) and the concomitant release of free [1-methyl-3-butyl imidazolium]TFSI ionic liquid (IL). A comparison of thermal (Tg), ion conducting (σDC), and viscoelastic (elastic moduli (G')) properties for DIGs and their parent polyelectrolytes, as well as extracted and IL-doped DIGs, demonstrates the formation of ionic cross-links and the ability to easily produce polymer electrolytes with enhanced ionic conductivity (σDC up to 4.5 × 10-5 S cm-1 at 30 °C) and higher elastic moduli (G' up to 4 kPa at 25 °C and 1 rad s-1), making them highly desirable in many electrochemical applications, including supercapacitors, soft robotics, electrochromic devices, sensors, and solar cells.

Effect of Polymer Gel Elasticity on Complex Coacervate Phase Behavior

Gels are key materials in biological systems such as tissues and may control biocondensate formation and structure. To further understand the effects of elastic environments on biomacromolecular assembly, we have investigated the phase behavior and radii of complex coacervate droplets in polyacrylamide (PAM) networks as a function of gel modulus. Poly-l-lysine (PLL) and sodium hyaluronate (HA) complex coacervate phases were prepared in PAM gels with moduli varying from 0.035 to 15.0 kPa. The size of the complex coacervate droplets is reported from bright-field microscopy and confocal fluorescence microscopy. Overall, the complex coacervate droplet volume decreases inversely with the modulus. Fluorescence microscopy is also used to determine the phase behavior and concentration of fluorescently tagged HA in the complex coacervate phases as a function of ionic strength (100-270 mM). We find that the critical ionic strength and complex coacervate stability are nonmonotonic as a function of the network modulus and that the local gel concentration can be used to control phase behavior and complex coacervate droplet size scale. By understanding how elastic environments influence simple electrostatic assembly, we can further understand how biomacromolecules exist in complex, crowded, and elastic cellular environments.

Effect of ion distribution on stress relaxation in polyelectrolyte complex gels

Solutions of polyelectrolytes consisting of polycations and polyanions in equal proportions were studied in the present work. Due to the physical cross-links formed by the charged groups, physical gels were formed in such systems. The mechanical properties and structure of the obtained gels depending on the charge arrangement along the backbone and the dimensionless Bjerrum length λ were investigated. The response of the systems to a uniaxial affine deformation was studied first. It was found that the systems can be divided into three groups depending on the charge arrangement: showing an almost elastic response; showing a viscoelastic response with a very long relaxation time; and showing a weak viscoelastic response with a short relaxation time. Interestingly, no stable aggregates were formed in the systems with the charges located on spacers, probably because of the increased mobility of the charges in such systems. The obtained stress relaxation curves had different functional forms, indicating that the relaxation has at least two characteristic times, which are different for different systems. In order to understand the molecular nature of the observed mechanical response, the temporal evolution of the network structure of a system showing a viscoelastic response with a very long relaxation time was studied; the aggregates were found to be dynamic, which leads to the relaxation of the "subchains" conformation.

Advances, Applications, and Emerging Opportunities in Electrostatic Hydrogels

Polyelectrolyte complex (PEC) hydrogels, which self-assemble via complexation of oppositely charged block polymers, have recently risen to prominence owing to their unique characteristics such as hierarchical microstructure, tunable bulk properties, and the ability to precisely assimilate charged cargos (i.e., proteins and nucleic acids). Significant foundational research has delineated the structure-property relationship of PEC hydrogels for use in a wide range of applications. In this Perspective, we summarize key findings on the microstructure and bulk properties of PEC hydrogels and discuss how intrinsic and extrinsic factors can be tuned to create specifically tailored PEC hydrogels with desired properties. We highlight successful applications of PEC hydrogels while offering insight into strategies to overcome their shortcomings and elaborate on emerging opportunities in the field of electrostatic self-assemblies.

pH-Sensitive Poly(acrylic acid)-g-poly(L-lysine) Charge-Driven Self-Assembling Hydrogels with 3D-Printability and Self-Healing Properties

We report the rheological behavior of aqueous solutions of a graft copolymer polyampholyte, constituted of polyacrylic acid (PAA) backbone grafted by Poly(L-lysine) (PAA-b-PLL). The graft copolymer self-assembles in aqueous media, forming a three-dimensional (3D) network through polyelectrolyte complexation of the oppositely charged PAA and PLL segments. Rheological investigations showed that the hydrogel exhibits interesting properties, namely, relatively low critical gel concentration, elastic response with slow dynamics, remarkable extended critical strain to flow, shear responsiveness, injectability, 3D printability and self-healing. Due to the weak nature of the involved polyelectrolyte segments, the hydrogel properties display pH-dependency, and they are affected by the presence of salt. Especially upon varying pH, the PLL secondary structure changes from random coil to α-helix, affecting the crosslinking structural mode and, in turn, the overall network structure as reflected in the rheological properties. Thanks to the biocompatibility of the copolymer constituents and the biodegradability of PLL, the designed gelator seems to exhibit potential for bioapplications.

Ambient Environment Adaptive Elastomer Constructed by Microphase Separation and Segment Complexation of Triblock Copolymers

Elastomers with environmental adaption have attracted considerable attention for advanced applications in various areas. Here, we fabricate an ambient environment adaptive elastomer by assembling triblock copolymers polystyrene-b-poly(acrylic acid)-b-polystyrene (SAS) and polystyrene-b-poly(ethylene oxide)-b-polystyrene (SES). Owing to the microphase separation of triblock polymers and hydrogen-bonding complexation of their middle segments, the SAS/SES complex presents dichotomy of vitrified hard PS domains and soft PAA/PEO domains, which presents major relaxation transition in the temperature zone 10-30 °C and relative humidity (RH) 40-60%. The SAS/SES elastomer presents quick adaption to the ambient environment change with temperature and humidity coupling. Moreover, after a loading-unloading cycle training, the SAS/SES elastomer exhibits domain orientation, low energy dissipation, high recovery ratio, and distinct strain stiffening compared with the pristine complex. The SAS/SES elastomer has potential to be used as a sensing and adaption component for complicated intelligent systems.

Phase behavior of medium-length hydrophobically associating PEO-PPO multiblock copolymers in aqueous media

HYPOTHESIS

The micellization of block copolymers of poly(ethylene oxide) (PEO) and poly(propylene oxide) (PPO) is driven by the dehydration of PPO at elevated temperatures. At low concentrations, a viscous solution of isolated micelles is obtained, whereas at higher concentrations, crowding of micelles results in an elastic gel. Alternating PEO-PPO multiblock copolymers are expected to exhibit different phase behavior, with altered phase boundaries and thermodynamics, as compared to PEO-PPO-PEO triblock copolymers (Pluronics®) with equal hydrophobicity, thereby proving the pivotal role of copolymer architecture and molecular weight.

EXPERIMENTS

Multiple characterization techniques were used to map the phase behavior as a function of temperature and concentration of PEO-PPO multiblock copolymers (ExpertGel®) in aqueous solution. These techniques include shear rheology, differential and adiabatic scanning calorimetry, isothermal titration calorimetry and light transmittance. The micellar size and topology were studied by dynamic light scattering.

FINDINGS

Multiblocks have lower transition temperatures and higher thermodynamic driving forces for micellization as compared to triblocks due to the presence of more than one PPO block per chain. With increasing concentration, the multiblock copolymers in solution gradually evolve into a viscoelastic network formed by soluble bridges in between micellar nodes, whereas hairy triblock micelles jam into liquid crystalline phases resembling an elastic colloidal crystal.

A mini-review on bio-inspired polymer self-assembly: single-component and interactive polymer systems

Biology demonstrates meticulous ways to control biomaterials self-assemble into ordered and disordered structures to carry out necessary bioprocesses. Empowering the synthetic polymers to self-assemble like biomaterials is a hallmark of polymer physics studies. Unlike protein engineering, polymer science demystifies self-assembly by purposely embedding particular functional groups into the backbone of the polymer while isolating others. The polymer field has now entered an era of advancing materials design by mimicking nature to a very large extend. For example, we can make sequence-specific polymers to study highly ordered mesostructures similar to studying proteins, and use charged polymers to study liquid-liquid phase separation as in membraneless organelles. This mini-review summarizes recent advances in studying self-assembly using bio-inspired strategies on single-component and multi-component systems. Sequence-defined techniques are used to make on-demand hybrid materials to isolate the effects of chirality and chemistry in synthetic block copolymer self-assembly. In the meantime, sequence patterning leads to more hierarchical assemblies comprised of only hydrophobic and hydrophilic comonomers. The second half of the review discusses complex coacervates formed as a result of the associative charge interactions of oppositely charged polyelectrolytes. The tunable phase behavior and viscoelasticity are unique in studying liquid macrophase separation because the slow polymer relaxation comes primarily from charge interactions. Studies of bio-inspired polymer self-assembly significantly impact how we optimize user-defined materials on a molecular level.

Ionic group-dependent structure of complex coacervate hydrogels formed by ABA triblock copolymers

This study investigates the nanostructure of complex coacervate core hydrogels (C3Gs) with varying compositions of cationic charged groups (i.e., ammonium and guanidinium) using small-angle X-ray/neutron scattering (SAX/NS). C3Gs were prepared by stoichiometric mixing of two oppositely charged ABA triblock copolymers in aqueous solvents, in which A end-blocks were functionalized with either sulfonate groups or a mixture of ammonium and guanidinium groups. Comprehensive small-angle X-ray/neutron scattering (SAX/NS) analysis elucidated the dependence of C3Gs structures on the fraction of guanidinium groups in the cationic end-block (x) and salt concentration (c_s). As x increases, the polymer volume fraction in the cores, and interfacial tension (γ_core) and salt resistance (c*) of the coacervate cores increase, which is attributed to the greater hydrophobicity and non-electrostatic association. Furthermore, we observed that the salt dependence of the interfacial tension follows γ_core ∼ (1 - c_s/c*)^3/2 in all series of x. The results show that the variation of the ionic group provides a powerful method to control the salt-responsiveness of C3Gs as stimuli-responsive materials.

Functional Nano-Objects by Electrostatic Self-Assembly: Structure, Switching, and Photocatalysis

The design of functional nano-objects by electrostatic self-assembly in solution signifies an emerging field with great potential. More specifically, the targeted combination of electrostatic interaction with other effects and interactions, such as the positioning of charges on stiff building blocks, the use of additional amphiphilic, π−π stacking building blocks, or polyelectrolytes with certain architectures, have recently promulgated electrostatic self-assembly to a principle for versatile defined structure formation. A large variety of architectures from spheres over rods and hollow spheres to networks in the size range of a few tenths to a few hundred nanometers can be formed. This review discusses the state-of-the-art of different approaches of nano-object formation by electrostatic self-assembly against the backdrop of corresponding solid materials and assemblies formed by other non-covalent interactions. In this regard, particularly promising is the facile formation of triggerable structures, i.e. size and shape switching through light, as well as the use of electrostatically assembled nano-objects for improved photocatalysis and the possible solar energy conversion in the future. Lately, this new field is eliciting an increasing amount of understanding; insights and limitations thereof are addressed in this article. Special emphasis is placed on the interconnection of molecular building block structures and the resulting nanoscale architecture via the key of thermodynamics.

Multicompartment Hydrogels

Hydrogels belong to the most promising materials in polymer and materials science at the moment. As they feature soft and tissue-like character as well as high water-content, a broad range of applications are addressed with hydrogels, e.g. tissue engineering and wound dressings but also soft robotics, drug delivery, actuators and catalysis. Ways to tailor hydrogel properties are crosslinking mechanism, hydrogel shape and reinforcement, but new features can be introduced by variation of hydrogel composition as well, e.g. via monomer choice, functionalization or compartmentalization. Especially, multicompartment hydrogels drive progress towards complex and highly functional soft materials. In the present review the latest developments in multicompartment hydrogels are highlighted with a focus on three types of compartments, i.e. micellar/vesicular, droplets or multi-layers including various sub-categories. Furthermore, several morphologies of compartmentalized hydrogels and applications of multicompartment hydrogels will be discussed as well. Finally, an outlook towards future developments of the field will be given. The further development of multicompartment hydrogels is highly relevant for a broad range of applications and will have a significant impact on biomedicine and organic devices. This article is protected by copyright. All rights reserved.

Polymer Encapsulation Strategy toward 3D Printable, Sustainable, and Reliable Form-Stable Phase Change Materials for Advanced Thermal Energy Storage

Form-stable phase change materials (PCMs) have garnered tremendous attention in thermal energy storage (TES) owing to their remarkable latent heat. However, the integration of intelligent manufacturing, recycling, and optimized multifunction is considered not feasible for form-stable PCMs due to the restriction of encapsulation technology. Here, an excellent polymer encapsulation strategy is proposed to prepare 3D printable, sustainable, and reliable form-stable PCMs (Si_PCM-x), which are universal for petroleum-based and biobased long alkyl compounds. Si_PCM-x have top-class latent heat, and the phase-change temperatures are tunable from body temperature to high temperature. The in situ formative bottlebrush phase-change polysiloxane networks are used as supporting materials, and the encapsulation mechanism is clarified. Si_rbw-250 can be degraded and re-encapsulated to achieve recycling. Besides, Si_rbw-250 is fabricated as the customer-designed objects with shape-changing behavior via 3D printing. By introducing the metal foams and nano-coatings, the resulting phase-change composites simultaneously exhibit excellent superhydrophobicity, mechanical properties, thermal conductivity, electromagnetic interference shielding behavior, and solar-, electric-, and magnetic-to-thermal energy conversion ability. Besides, S-Ni-Si_PCM-250 can be applied in the wearable functional devices and movable solar-thermal charging. This strategy will lead to huge renovation in the TES field and provide an efficient guideline for designing advanced form-stable PCMs.

Sodium dodecyl sulfate modulates the structure and rheological properties of Pluronic F108-poly(acrylic acid) coacervates)

Micelles formed within coacervate phases can impart functional properties, but it is unclear if this micellization provides mechanical reinforcement of the coacervate whereby the micelles act as high functionality crosslinkers. Here, we examine how sodium dodecyl sulfate (SDS) influences the structure and properties of Pluronic F108-polyacrylic acid (PAA) coacervates as SDS is known to decrease the aggregation number of Pluronic micelles. Increasing the SDS concentration leads to larger water content in the coacervate and an increase in the relative concentration of PAA to the other solids. Rheological characterization with small angle oscillatory shear (SAOS) demonstrates that these coacervates are viscoelastic liquids with the moduli decreasing with the addition of the SDS. The loss factor (tan δ) initially increases linearly with the addition of SDS, but a step function increase in the loss factor occurs near the reported CMC of SDS. However, this change in rheological properties does not appear to be correlated with any large scale structural differences in the coacervate as determined by small angle X-ray scattering (SAXS) with no signature of Pluronic micelles in the coacervate when SDS concentration is >4 mM during formation of the coacervate, which is less than that observed (6 mM SDS) in initial Pluronic F108 solution despite the higher polymer concentration in the coacervate. These results suggest that the mechanical properties of polyelectrolyte-non-ionic surfactant coacervates are driven by the efficicacy of binding between the complexing species driving the coacervate, which can be disrupted by competitive binding of the SDS to the Pluronic.

Peptide Design and Self-assembly into Targeted Nanostructure and Functional Materials

Peptides have been extensively utilized to construct nanomaterials that display targeted structure through hierarchical assembly. The self-assembly of both rationally designed peptides derived from naturally occurring domains in proteins as well as intuitively or computationally designed peptides that form β-sheets and helical secondary structures have been widely successful in constructing nanoscale morphologies with well-defined 1-d, 2-d, and 3-d architectures. In this review, we discuss these successes of peptide self-assembly, especially in the context of designing hierarchical materials. In particular, we emphasize the differences in the level of peptide design as an indicator of complexity within the targeted self-assembled materials and highlight future avenues for scientific and technological advances in this field.

Recent Progress of Layer-by-layer Assembly, Free-Standing Film and Hydrogel Based on Polyelectrolytes

Nowadays, polyelectrolytes play an essential role in the development of new materials. Their use allows creating new properties of materials and surfaces and vary them in a wide range. Basically, modern methods are divided into three areas-the process of layer-by-layer deposition, free-standing films, and hydrogels based on polyelectrolytes. Layer-by-layer assembly of polyelectrolytes on various surfaces is a powerful technique. It allows giving surfaces new properties, for example, protect them from corrosion. Free-standing films are essential tools for the design of membranes and sensors. Hydrogels based on polyelectrolytes have recently shown their applicability in electrical and materials science. The creation of new materials and components with controlled properties can be achieved using polyelectrolytes. This review focuses on new technologies that have been developed with polyelectrolytes over the last five years.

Modulation of Properties through Covalent Bond Induced Formation of Strong Ion Pairing between Polyelectrolytes in Injectable Conetwork Hydrogels

In situ simultaneous formation of both covalent linkages and ion pair is challenging yet necessary to control the biological properties of a hydrogel. We report that the generation of covalent linkages (⁺N-C) facilitates the simultaneous formation of ion pairs between polyelectrolytes (PEs) in a hydrogel network. Co-injection of tertiary amine functional macromolecules and reactive poly(ethylene glycol) (PEG) containing negatively charged PE leads to the formation of hydrogel conetworks consisting of covalent junctions and ion pairs. Our design is based on the gradual appearance of ⁺N-C junctions followed by formation of ion pairs. This strategy provides an easy access to hydrogel networks bearing a predetermined proportion of ion pair and covalent cross-linking junction. The proportion of ion pair could be varied by introducing a precalculated proportion of mono- and difunctional reactive PEG in the hydrogel system. The topology of the prepolymer and the hydrogel could be modulated (graft) during hydrogel formation. This approach is applicable to obtain covalent/ionic, covalent bond induced purely ionic, and purely covalent hydrogels of several macromolecular entities. The effect of ion pairing in the hydrogels is strongly reflected in the modulus, strain bearing, degradation, free volume, swelling, and drug release properties. The hydrogels exhibit microscopic recovery of modulus after application of high amplitude strain depending on the prepolymer concentration (chain entanglement) and nature of hydrogel network. The hydrogels are hemocompatible, and the covalent/ionic hydrogels show a slower release of methotrexate than that of the purely covalent hydrogel. This work provides an understanding for the in situ construction and manipulation of biological properties of hydrogels through the covalent bond induced formation of a strong ion pair.

The effect of ion pairs on coacervate-driven self-assembly of block polyelectrolytes

The incorporation of oppositely charged polyelectrolytes into a block copolymer system can lead to formation of microphase separated nanostructures driven by the electrostatic complex between two oppositely charged blocks. It is a theoretical challenge to build an appropriate model to handle such coacervate-driven self-assembly, which should capture the strong electrostatic correlations for highly charged polymers. In this paper, we develop the self-consistent field theory considering the ion paring effect to predict the phase behavior of block polyelectrolytes. In our model, two types of ion pairs, the binding between two oppositely charged monomers and the binding between charged monomers and counterions, are included. Their strength of formation is controlled by two parameters K_aa and K_ac, respectively. We give a detailed analysis about how the binding strength K_ac and K_aa and salt concentration affect the self-assembled nanostructure of diblock polyelectrolyte systems. The results show that the binding between two oppositely charged blocks provides driven force for microphase separation, while the binding between charged monomers and counterions competes with the polyion pairing and thus suppresses the microphase separation. The addition of salt has a shielding effect on the charges of polymers, which is a disadvantage to microphase separation. The phase diagrams as a function of polymer concentration and salt concentration at different situations are constructed, and the influence of K_aa, K_ac, and charged block composition f_a is analyzed in depth. The obtained phase diagrams are in good agreement with currently existing experimental and theoretical results.

SAXS methods for investigating macromolecular and self-assembled polyelectrolyte complexes

Polyelectrolyte complexation is driven by associative interactions between oppositely charged polyelectrolytes, resulting in formation of a macroscopic polymer dense phase and a polymer dilute phase with applications in coatings, adhesives, and purification membranes. Beyond macroscale phase separation, precision polymer synthesis has enabled further development of polyelectrolyte complex (PEC)-based self-assembled micelles and hydrogels with applications in biotechnology. Interestingly, it has been suggested that mechanisms similar to polyelectrolyte complexation drive formation of biological condensates that play an indispensable role in cellular biogenesis. The formation pathways and functionality of these complex materials is dependent on the physical properties that are built into polymer structure and the resulting physical conformation in the dilute and dense phase. Scattering techniques have enabled in situ investigation of structure-function relationships in PEC materials that may address unresolved biophysical questions in cellular processes as well as catalyze the development of novel materials for diverse applications. We describe preparation of PEC materials with controlled polymer characteristics (length, blockiness, charge density), small-angle X-ray scattering (SAXS) techniques employed to probe appropriate length scales, and the data analysis routines from a practical standpoint for new users. This article deals with bulk complexes and not with the related, important and interesting area of non-equilibrium layer-by-layer assembly of polyelectrolytes.