Nonionic Block Copolymer Coacervates

Understanding, Mimicking, and Mitigating Radiolytic Damage to Polymers in Liquid Phase Transmission Electron Microscopy

Advances in liquid phase transmission electron microscopy (LP-TEM) have enabled the monitoring of polymer dynamics in solution at the nanoscale, but radiolytic damage during LP-TEM imaging limits its routine use in polymer science. This study focuses on understanding, mimicking, and mitigating radiolytic damage observed in functional polymers in LP-TEM. It is quantitatively demonstrated how polymer damage occurs across all conceivable (LP-)TEM environments, and the key characteristics and differences between polymer degradation in water vapor and liquid water are elucidated. Importantly, it is shown that the hydroxyl radical-rich environment in LP-TEM can be approximated by UV light irradiation in the presence of hydrogen peroxide, allowing the use of bulk techniques to probe damage at the polymer chain level. Finally, the protective effects of commonly used hydroxyl radical scavengers are compared, revealing that the effectiveness of graphene's protection is distance-dependent. The work provides detailed methodological guidance and establishes a baseline for polymer degradation in LP-TEM, paving the way for future research on nanoscale tracking of shape transitions and drug encapsulation of polymer assemblies in solution.

Multiphase coacervates: mimicking complex cellular structures through liquid-liquid phase separation

Coacervate microdroplets, arising from liquid-liquid phase separation, have emerged as promising models for primary cells, demonstrating the ability to regulate biomolecular enrichment, create chemical gradients, accelerate confined reactions, and even express proteins. Notably, multiphase coacervation provides a robust framework to replicate hierarchically complex cellular structures, offering valuable insights into cellular organization and function. In this review, we explore the recent advancements in the study of multiphase coacervates, focusing on design strategies, underlying mechanisms, structural control, and their applications in biomimetics. These developments highlight the potential of multiphase coacervates as powerful tools in the field of synthetic biology and material science.

Scattering Elimination in 2D IR Immune from Detector Artifacts

Highly scattering samples, such as polymer droplets or solid-state powders, are difficult to study via coherent two-dimensional infrared (2D IR) spectroscopy. Previously, researchers have employed (quasi-) phase cycling, local-oscillator chopping, and polarization control to reduce scattering, but the latter method poses a limit on polarization-dependent measurements. Here, we present a method for Scattering Elimination Immune from Detector Artifacts (SEIFDA) in pump-probe 2D IR experiments. Our method extends the negative probe delay method of removing scattering from pump-probe spectroscopy to 2D experiments. SEIFDA works well for all polarizations when combined with the optimized noise reduction scheme to remove additive and multiplicative noise. We demonstrate that our method can be employed with any polarization scheme and reliably lowers the scattering at parallel polarization to comparable levels to the conventional 8-frame phase cycling with probe chopping (8FPCPC) at perpendicular polarization. Our system can acquire artifact free spectra in parallel polarization when the signal intensity is as little as 5% of the intensity of the interference between the pump pulses scattered into the detector. It reduces the time required to characterize the scattering term by at least 50% over 8FPCPC. Through detailed analysis of detector nonlinearity, we show that the performance of 8FPCPC can be improved by incorporating nonlinear correction factors, but it is still worse than that of SEIFDA. Application of SEIFDA to study the encapsulation of Nile red in polymer droplets demonstrates that this method will be very useful for probing highly scattering systems.

Revealing nanoscale structure and interfaces of protein and polymer condensates via cryo-electron microscopy

Liquid-liquid phase separation (LLPS) is a ubiquitous demixing phenomenon observed in various molecular solutions, including in polymer and protein solutions. Demixing of solutions results in condensed, phase separated droplets which exhibit a range of liquid-like properties driven by transient intermolecular interactions. Understanding the organization within these condensates is crucial for deciphering their material properties and functions. This study explores the distinct nanoscale networks and interfaces in the condensate samples using a modified cryo-electron microscopy (cryo-EM) method. The method involves initiating condensate formation on electron microscopy grids to limit droplet growth as large droplet sizes are not ideal for cryo-EM imaging. The versatility of this method is demonstrated by imaging three different classes of condensates. We further investigate the condensate structures using cryo-electron tomography which provides 3D reconstructions, uncovering porous internal structures, unique core-shell morphologies, and inhomogeneities within the nanoscale organization of protein condensates. Comparison with dry-state transmission electron microscopy emphasizes the importance of preserving the hydrated structure of condensates for accurate structural analysis. We correlate the internal structure of protein condensates with their amino acid sequences and material properties by performing viscosity measurements that support that more viscous condensates exhibit denser internal assemblies. Our findings contribute to a comprehensive understanding of nanoscale condensate structure and its material properties. Our approach here provides a versatile tool for exploring various phase-separated systems and their nanoscale structures for future studies.

Photocleavable Polymer Cubosomes: Synthesis, Self-Assembly, and Photorelease

Polymer cubosomes (PCs) are a recent class of self-assembled block copolymer (BCP) microparticles with an accessible periodic channel system. Most reported PCs consist of a polystyrene scaffold, which provides mechanical stability for templating but has a limited intrinsic functionality. Here, we report the synthesis of photocleavable BCPs with compositions suitable for PC formation. We analyze the self-assembly mechanism and study the model release of dyes during irradiation, where the transition of the BCPs from amphiphilic to bishydrophilic causes the rapid disassembly of the PCs. A combination of modeling and experiment shows that the evolution of PCs proceeds first via liquid-liquid phase separation into polymer-rich droplets, followed by microphase separation within this droplet confinement, and finally, membrane reorganization into high internal order. This insight may encourage exploration of alternative preparation strategies to better control the size and homogeneity of PCs.

Liquid-liquid phase separation induced auto-confinement

Confinement allows macromolecules and biomacromolecules to attain arrangements typically unachievable through conventional self-assembly processes. In the field of block copolymers, confinement has been achieved by preparing thin films and controlled solvent evaporation through the use of emulsions. A significant advantage of the confinement-driven self-assembly process is its ability to enable block copolymers to form particles with complex internal morphologies, which would otherwise be inaccessible. Here, we show that liquid-liquid phase separation (LLPS) can induce confinement during the self-assembly of a model block copolymer system. Since this confinement is driven by the block copolymers' tendency to undergo LLPS, we define this confinement type as auto-confinement. This study adds to the growing understanding of how LLPS influences block copolymer self-assembly and provides a new method to achieve confinement driven self-assembly.

Exploration of Organic Nanomaterials with Liquid-Phase Transmission Electron Microscopy

ConspectusOrganic, soft materials with solution-phase nanoscale structures, such as emulsions, hydrogels, and thermally responsive materials, are inherently difficult to directly image via dry state and cryogenic-transmission electron microscopy (TEM). Therefore, we lack a routine microscopy method with sufficient resolution that can, in tandem with scattering techniques, probe the morphology and dynamics of these and many related systems. These challenges motivate liquid cell (LC) TEM method development, aimed at making the technique generally available and routine. To date, the field has been and continues to be dominantly focused on analyzing solution-phase inorganic materials. These mostly metallic nanoparticles have been studied at electron fluxes that can allow for high-resolution imaging, in the range of hundreds to thousands of e- Å-2 s-1. Despite excellent contrast, in these cases, one often contends with knock-on damage, direct radiolysis, and sensitization of the solvent by virtue of enhanced secondary electron production by the impinging electron beam. With an interest in soft materials, we face both related and distinct challenges, especially in achieving a high-enough contrast within solvated liquid cells. Additionally, we must be aware of artifacts associated with high-flux imaging conditions in terms of direct radiolysis of the solvent and the sensitive materials themselves. Regardless, with care, it has become possible to gain real insight into both static and dynamic organic nanomaterials in solution. This is due, in large part, to key advances that have been made, including improved sample preparation protocols, image capture technologies, and image analysis, which have allowed LCTEM to have utility. To enable solvated soft matter characterization by LCTEM, a generalizable multimodal workflow was developed by leveraging both experimental and theoretical precedents from across the LCTEM field and adjacent works concerned with solution radiolysis and nanoparticle tracking analyses. This workflow consists of (1) modeling electron beam-solvent interactions, (2) studying electron beam-sample interactions via LCTEM coupled with post-mortem analysis, (3) the construction of "damage plots" displaying sample integrity under varied imaging and sample conditions, (4) optimized LCTEM imaging, (5) image processing, and (6) correlative analysis via X-ray or light scattering. In this Account, we present this outlook and the challenges we continue to overcome in the direct imaging of dynamic solvated nanoscale soft materials.

Effect of Cosolvent on the Vesicle Formation Pathways under Solvent Exchange Process: A Dissipative Particle Dynamics Simulation

The effective control over the vesicle formation pathways is vital for tuning its function. Recently, a liquid-liquid phase-separated intermediate (LLPS) is observed before a vesicular structure during the solvent exchange self-assembly of block copolymers. Though the understanding of polymer structures and chemical compositions on the competition between LLPS and micellization has made some progress, little is known about the role of cosolvent on it. In this study, the influence of cosolvent on the vesicle formation pathways is investigated by using dissipative particle dynamics. The results show that the range of water fraction within which the LLPS is favored will be highly dependent on the affinity difference of cosolvent to water and to polymer repeat units. The change of the cosolvent-water interaction and the water fraction impact the distribution of cosolvent in the polymer domain, the miscibility between the components in the system as well as the chain conformations, which finally induce different self-assembly behaviors. Our findings would be helpful for understanding the LLPS and controlling the morphologies of diblock polymers in solutions for further applications.

Ouzo Effect Examined at the Nanoscale via Direct Observation of Droplet Nucleation and Morphology

Herein, we present the direct observation via liquid-phase transmission electron microscopy (LPTEM) of the nucleation and growth pathways of structures formed by the so-called "ouzo effect", which is a classic example of surfactant-free, spontaneous emulsification. Such liquid-liquid phase separation occurs in ternary systems with an appropriate cosolvent such that the addition of the third component extracts the cosolvent and makes the other component insoluble. Such droplets are homogeneously sized, stable, and require minimal energy to disperse compared to conventional emulsification methods. Thus, ouzo precipitation processes are an attractive, straightforward, and energy-efficient technique for preparing dispersions, especially those made on an industrial scale. While this process and the resulting emulsions have been studied by numerous indirect techniques (e.g., X-ray and light scattering), direct observation of such structures and their formation at the nanoscale has remained elusive. Here, we employed the nascent technique of LPTEM to simultaneously evaluate droplet growth and nanostructure. Observation of such emulsification and its rate dependence is a promising indication that similar LPTEM methodologies may be used to investigate emulsion formation and kinetics.

An Overview of Coacervates: The Special Disperse State of Amphiphilic and Polymeric Materials in Solution

Individual amphiphiles, polymers, and colloidal dispersions influenced by temperature, pH, and environmental conditions or interactions between their oppositely charged pairs in solvent medium often produce solvent-rich and solvent-poor phases in the system. The solvent-poor denser phase found either on the top or the bottom of the system is called coacervate. Coacervates have immense applications in various technological fields. This review comprises a concise introduction, focusing on the types of coacervates, and the influence of different factors in their formation, structures, and stability. In addition, their physicochemical properties, thermodynamics of formation, and uses and multifarious applications are also concisely presented and discussed.

Fatty Acid-Based Coacervates as a Membrane-free Protocell Model

Membrane-less scenarios that involve liquid-liquid phase separation (coacervation) provide clues for how protocells might emerge. Here, we report a versatile approach to construct coacervates by mixing fatty acid with biomolecule dopamine as the protocell model. The coacervate droplets are easily formed over a wide range of concentrations. The solutes with different interaction characteristics, including cationic, anionic, and hydrophobic dyes, can be well concentrated within the coacervates. In addition, reversible self-assemblies of the coacervates can be controlled by concentration, pH, temperature, salinity, and bioreaction realizing cycles between compartmentalization and noncompartmentalization. Through in situ dopamine polymerization, the stability of coacervate droplets is significantly improved, leading to higher resistance toward external factors. Therefore, the coacervates based on fatty acid and dopamine could serve as a bottom-up membrane-less protocell model that provides the links between the simple (small molecule) and complex (macromolecule) systems in the process of cell evolution.

Selective Accumulation to Tumor Cells with Coacervate Droplets Formed from a Water-Insoluble Acrylate Polymer

Selective targeting of specific cells without the use of biological ligands has not been achieved. In the present study, we revealed that the coacervate droplets formed from poly(2-methoxyethyl acrylate) (PMEA) and its derivatives selectively accumulated to tumor cells. PMEA derivatives, which are insoluble acrylate polymers, induced coacervation in water to form polymer-dense droplets via hydrophobic interaction. Interestingly, the accumulation of coacervate droplets to tumor cells was involved in the bound water content of PMEA derivatives. Coacervate droplets with a high bound water content accumulated and internalized up to 36.6-fold higher in HeLa cervical tumor cells than in normal human fibroblasts (NHDF). Moreover, the interactions between coacervate droplets and plasma membrane components such as CD44 played a key role in this accumulation process. Therefore, coacervate droplets formed from PMEA derivatives have great clinical potential in tumor cell detection, development of alternative tumor-targeting ligands, and optimization of drug delivery carriers.

Observation of Liquid-Liquid-Phase Separation and Vesicle Spreading during Supported Bilayer Formation via Liquid-Phase Transmission Electron Microscopy

Liquid-phase transmission electron microscopy (LP-TEM) enables the real-time visualization of nanoscale dynamics in solution. This technique has been used to study the formation and transformation mechanisms of organic and inorganic nanomaterials. Here, we study the formation of block-copolymer-supported bilayers using LP-TEM. We observe two formation pathways that involve either liquid droplets or vesicles as intermediates toward supported bilayers. Quantitative image analysis methods are used to characterize vesicle spread rates and show the origin of defect formation in supported bilayers. Our results suggest that bilayer assembly methods that proceed via liquid droplet intermediates should be beneficial for forming pristine supported bilayers. Furthermore, supported bilayers inside the liquid cells may be used to image membrane interactions with proteins and nanoparticles in the future.

Liquid-Phase Condensation via Macromolecular Crowding in Polymerization-Induced Electrostatic Self-Assembly

Macromolecular crowding plays a key role in liquid-phase condensation of proteins and membraneless organelles yet is largely unexplored for artificial liquid materials. Herein, we present a strategy for direct access to multiphase liquid condensates with individual charged/neutral subdomains, by introducing macromolecular crowding to our previous protocol of liquid-liquid phase-separation-driven polymerization-induced electrostatic self-assembly (LLPS-PIESA). We show that reversible addition fragmentation chain transfer (RAFT) aqueous dispersion photo-copolymerization of a charged monomer with a specific neutral monomer, in the presence of a polar macrochain transfer agent (CTA) and an oppositely charged polyion, can induce self-sorting and macromolecular crowding. LLPS-PIESA proceeds via liquid-phase condensation of as-assembled nascent clusters up to biologically important nanostructured multiphase condensates with individual charged/neutral subdomains.

Hydrogen Sulfide-Responsive Bicontinuous Nanospheres

Block copolymers (BCPs) that can self-assemble into particles and be triggered by disease-specific molecules such as hydrogen sulfide (H₂S) have the potential to impact on drug delivery, decreasing off-target toxicities while increasing drug efficacy. However, the incorporation of H₂S-responsive aryl azides into BCPs for self-assembly has been limited by heat, light, and radical sensitivities. In this study, a robust activator regenerated by the electron-transfer atom-transfer radical polymerization reaction was used to synthesize aryl-azide-containing BCPs under ambient conditions. Conditions controlling self-assembly of the BCPs into 150-200 nm particles and the physicochemical properties of the particles were investigated. The use of nanoprecipitation with tetrahydrofuran to promote self-assembly of the BCPs resulted in vesicle structures, while dimethylformamide or dimethylsulfoxide resulted in polymeric bicontinuous nanospheres (BCNs). Triggering of the BCPs and particles (vesicles or BCNs) via exposure to H₂S revealed that unsubstituted aryl azides were readily reduced (by HS^-), resulting in particle disruption or cross-linking. The relative polar nature of the particle bilayers containing unsubstituted aryl azides and the open structure of the BCNs did however limit encapsulation of small hydrophilic and hydrophobic payloads. Incorporation of a benzylamide substituent onto the aryl azide group increased the hydrophobicity of the particles and encapsulation of hydrophilic cargo but reduced sensitivity to H₂S, likely due to the reduced penetration of HS^- into the bilayer.

A Close Look at Molecular Self-Assembly with the Transmission Electron Microscope

Molecular self-assembly is pervasive in the formation of living and synthetic materials. Knowledge gained from research into the principles of molecular self-assembly drives innovation in the biological, chemical, and materials sciences. Self-assembly processes span a wide range of temporal and spatial domains and are often unintuitive and complex. Studying such complex processes requires an arsenal of analytical and computational tools. Within this arsenal, the transmission electron microscope stands out for its unique ability to visualize and quantify self-assembly structures and processes. This review describes the contribution that the transmission electron microscope has made to the field of molecular self-assembly. An emphasis is placed on which TEM methods are applicable to different structures and processes and how TEM can be used in combination with other experimental or computational methods. Finally, we provide an outlook on the current challenges to, and opportunities for, increasing the impact that the transmission electron microscope can have on molecular self-assembly.