Original Crystal Structures of Even–Even Polyamides Made of Pleated and Rippled Sheets

Nylons with Applications in Energy Generators, 3D Printing and Biomedicine

Linear polyamides, known as nylons, are a class of synthetic polymers with a wide range of applications due to their outstanding properties, such as chemical and thermal resistance or mechanical strength. These polymers have been used in various fields: from common and domestic applications, such as socks and fishing nets, to industrial gears or water purification membranes. By their durability, flexibility and wear resistance, nylons are now being used in addictive manufacturing technology as a good material choice to produce sophisticated devices with precise and complex geometric shapes. Furthermore, the emergence of triboelectric nanogenerators and the development of biomaterials have highlighted the versatility and utility of these materials. Due to their ability to enhance triboelectric performance and the range of applications, nylons show a potential use as tribo-positive materials. Because of the easy control of their shape, they can be subsequently integrated into nanogenerators. The use of nylons has also extended into the field of biomaterials, where their biocompatibility, mechanical strength and versatility have paved the way for groundbreaking advances in medical devices as dental implants, catheters and non-absorbable surgical sutures. By means of 3D bioprinting, nylons have been used to develop scaffolds, joint implants and drug carriers with tailored properties for various biomedical applications. The present paper aims to collect evidence of these recently specific applications of nylons by reviewing the literature produced in recent decades, with a special focus on the newer technologies in the field of energy harvesting and biomedicine.

Molecular Dynamics Studies of Atomistically Determined Fibrillar Assemblies: Comparison of the Rippled β-Sheet, Pleated β-Sheet, and Herringbone Structures

Pauling and Corey expected that a racemic mixture would result in a rippled β-sheet, however, it has been known from experiments that the racemic mixtures of triphenylalanine lead to a herringbone structure. Because of the theoretical limitations concerning crystal structures such as rippled β-sheet, it is inevitable to understand how the interplay of the amino acids prefers a specific structural motif. In this paper we use molecular dynamics to understand the sequence- and enantiomer-dependent structures by comparisons between rippled β-sheet and pleated β-sheet, solvated and anhydrous rippled β-sheet, and rippled β-sheet and the herringbone structure, based on thermodynamics and structures at the atomic level. The tripeptides select the favored structure that can be stabilized through aromatic or hydrogen bonding interactions between tripeptides. Furthermore, the solubility is determined by the environment of space that is created around the side chains. Our findings provide comprehensive insight into the crystallized fibril motif of the polypeptide.

Nylon Fabric/GO Based Self-Powered Humidity Sensor Based on the Galvanic Cell Principle with High Air Permeability and Rapid-Response

Flexible humidity sensors have received more and more attention in people's lives, and the problems of gas permeability and power supply issues of the device have long been areas in need of improvement. In this work, inspired by the high air permeability of daily wear clothing and galvanic batteries, a self-powered humidity sensor with high air permeability and fast response is designed. A nylon fabric/GO net (as a humidity sensitive layer and solid electrolyte) is obtained by spraying technique. This structure enables the sensor to have fast response/recovery (0.78 s/0.93 s, calculated at 90% of the final value), ultra-high response (0.83 V) and excellent stability (over 150 cycles) at 35 °C. Such sensors are useful for health monitoring, such as non-contact monitoring of human respiratory rate before and after exercise, and monitoring a level of humidity in the palms, arms, and fingers. This research provides an idea for developing a flexible wearable humidity sensor that is both breathable and self-powered and can also be mass-produced similar to wearable clothing.

Reorganization of Hydrogen Bonding in Biobased Polyamide 5,13 under the Thermo-Mechanical Field: Hierarchical Microstructure Evolution and Achieving Excellent Mechanical Performance

The hierarchical microstructure evolution of an emerging biobased odd-odd polyamide 5,13 (PA5,13) films under the thermo-mechanical field, stepping from hydrogen bond (H-bond) arrangement to the crystalline morphology, has been investigated systematically. It is found that the reorganization of H-bonds under the thermo-mechanical field plays a crucial role in the crystallization of PA5,13. Especially, it is revealed that the crystallization process under the thermo-mechanical field develops along the chain axis direction, while lamellar fragmentation occurs perpendicular to the chain axis. Consequently, a stable and well-organized H-bond arrangement and lengthened lamellae with significant orientation have been constructed. Laudably, an impressive tensile strength of about 500 MPa and modulus of about 4.7 GPa are thus achieved. The present study could provide important guidance for the industrial-scale manufacture of high-performance biobased odd-odd PAs with long polymethylene segment in the dicarboxylic unit combined with a large difference between the polymethylene segments in the dicarboxylic and diamine units.

Hydration, Refinement, and Dissolution of the Crystalline Phase in Polyamide 6 Polymorphs for Ultimate Thermomechanical Properties

Timescales of polyamide 6 melt-shaping technologies, relative to the dynamics of conformational rearrangements upon crystallization, challenge the formation of the most thermodynamically favorable chain packing and thus optimum performance. In this publication, we make use of the mediation of hydrogen bonding by water molecules in the superheated state of water, i.e., above 100 °C in a closed environment, in the structural refinement of polyamide 6 for enhanced thermomechanical performance. The paper addresses dissolution and (re)crystallization of different polyamide 6 polymorphs in the superheated state of water by time-resolved simultaneous small- and wide-angle X-ray scattering and solid-state ¹H NMR spectroscopy and the effect on mechanical properties. The experiments reveal that upon heating in the superheated state of water, the pseudo-hexagonal phase dissolves at relatively low temperature and instantly crystallizes in a defected monoclinic phase that successively refines to a perfected monoclinic structure. The dissolution temperature of the pseudo-hexagonal phase of polyamide 6 is found to be dependent on the degree of crystal perfection originating from conformational disorder and misalignment of hydrogen bonding in the lattice, retrospectively, to the Brill transition temperature. The perfected monoclinic phase below the dissolution temperature can be preserved upon cooling but is plasticized by hydration of the amide moieties in the crystalline phase. The removal of water from the hydrated crystals, in the proximity of Brill transition temperature, strengthening the hydrogen bonding, occurs. Retrospectively, the most thermodynamically stable crystallographic phase is preserved and renders an increase in mechanical properties and dimensional stability of the product. The insight obtained on the influence of superheated water on the structural refinement of imperfected crystallographic states assists in polyamide 6 postprocessing strategies for enhanced performance.

Homogeneous nucleation in polyamide 66, a two-stage process as revealed by combined nanocalorimetry and IR spectroscopy

Nanocalorimetry and Fourier transform infrared (FTIR) spectroscopy are combined to measure the calorimetric properties and molecular spectra of the same sample (sample amount about 5 ng) of polyamide 66 (PA66). By determining IR difference absorption spectra between a quenched and a sample annealed at varying temperatures (Ta) and annealing time (ta), the initial steps of homogeneous nucleation is for the first time revealed on a molecular scale, long before crystallization takes place. As starting point (i), isolated H-bonds are formed between (N–H) and (C = O) moieties of adjacent (neighboring) polymer segments promoted by far-reaching dipole–dipole interactions. In the second step (ii), the H-bonds realign, which in part requires the opening of already established H-bonds. In stage (i), the FTIR absorption intensity of the free (C = O)f moieties decreases while that of the H-bonded (C = O)b ones increases as a function of Ta at constant ta. This implies an increase in the H-bonding network in amorphous domains. The second stage of nucleation in the studied PA66 is characterized by an increase in the number of (C = O)f and a corresponding decrease in (C = O)b moieties as the sample transitions to the ordered crystalline structure. This is attributed to a change from γ to α polymorphs in PA66. The non-polar methylene units in PA66 are largely unaffected during the nucleation steps, where no changes in the overall heat capacity are detectable, proving that these changes occur prior to the onset of crystal growth.

Graphical abstract

Transient Confinement of the Quaternary Tetramethylammonium Tetrafluoroborate Salt in Nylon 6,6 Fibres: Structural Developments for High Performance Properties

A temporary confinement of the quaternary tetramethylammonium tetrafluoroborate (TMA BF₄) salt among polyamide molecules has been used for the preparation of aliphatic polyamide nylon 6,6 fibres with high-modulus and high-strength properties. In this method, the suppression or the weakening of the hydrogen bonds between the nylon 6,6 segments has been applied during the conventional low-speed melt spinning process. Thereafter, after the complete hot-drawing stage, the quaternary ammonium salt is fully extracted from the drawn 3 wt.% salt-confined fibres and the nascent fibres are, subsequently, thermally stabilized. The structural developments that are acquired in the confined-nylon 6,6 fibres are ascribed to the developments of the overall fibres' properties due to the confinement process. Surprisingly, unlike the neat nylon 6,6 fibres, the X-ray diffraction (XRD) patterns of the as-spun salt-confined fibres have shown diminishing of the (110)/(010) diffraction plane that obtained pseudohexagonal-like β' structural phase. Moreover, the β' pseudohexagonal-like to α triclinic phase transitions took-place due to the hot-drawing stage (draw-induced phase transitions). Interestingly, the hot-drawing of the as-spun salt-confined nylon 6,6 fibres achieved the same maximum draw ratio of 5.5 at all of the drawing temperatures of 120, 140 and 160 °C. The developments that happened produced the improved values of 43.32 cN/dtex for the tensile-modulus and 6.99 cN/dtex for the tensile-strength of the reverted fibres. The influences of the TMA BF₄ salt on the structural developments of the crystal orientations, on the morphological structures and on the improvements of the tensile properties of the nylon 6,6 fibres have been intensively studied.