Importance of Macromonomer Quality in the Ring-Opening Metathesis Polymerization of Macromonomers

Comparison of Polypentenamer and Polynorbornene Bottlebrushes in Dilute Solution

Bottlebrush (BB) polymers were synthesized via grafting-from-atom transfer radical polymerization (ATRP) of styrene on polypentenamer and polynorbornene macroinitiators with matched grafting density (n g = 4) and backbone degrees of polymerization (122 ≥ N bb ≥ 61) to produce a comparative study on their respective dilute solution properties as a function of increasing side chain degree of polymerization (116 ≥ N sc ≥ 5). The grafting-from technique produced near quantitative grafting efficiency and narrow dispersity N sc as evidenced by spectroscopic analysis and ring closing metathesis depolymerization of the polypentenamer BBs. The versatility of this synthetic approach permitted a comprehensive survey of power law expressions that arise from monitoring intrinsic viscosity, hydrodynamic radius, and radius of gyration as a function of increasing the molar mass of the BBs by increasing N sc. These values were compared to a series of linear (nongrafted, N sc = 0) macroinitiators in addition to linear grafts. This unique study allowed elucidation of the onset of bottlebrush behavior for two different types of bottlebrush backbones with identical grafting density but inherently different flexibility. In addition, grafting-from ATRP of methyl acrylate on a polypentenamer macroinitiator allowed the observation of the effects of graft chemistry in comparison to polystyrene. Differences in the observed scaling relationships in dilute solution as a function of each of these synthetic variants are discussed.

Synthesis of Bottlebrush Polymers with Spontaneous Self-Assembly for Dielectric Generators

Cross-linked bottlebrush polymers received significant attention as dielectrics in transducers due to their unique softness and strain stiffening caused by their structure. Despite some progress, there is still a great challenge in increasing their dielectric permittivity beyond 3.5 and cross-linking them to defect-free ultrathin films efficiently under ambient conditions. Here, we report the synthesis of bottlebrush copolymers based on ring-opening metathesis polymerization (ROMP) starting from a 5-norbornene-2-carbonitrile and a norbornene modified with a poly(dimethylsiloxane) (PDMS) chain as a macromonomer. The resulting copolymer was subjected to a postpolymerization modification, whereby the double bonds were used both for functionalization with thiopropionitrile and subsequent cross-linking via a thiol-ene reaction. The solutions of both bottlebrush copolymers formed free-standing elastic films by simple casting. DMA and broadband impedance spectroscopy revealed two glass transition temperatures uncommon for a random copolymer. The self-segregation of the nonpolar PDMS chains and the polynorbornane backbone is responsible for this and is supported by the interfacial polarization observed in broadband impedance spectroscopy and the scattering peaks observed in small-angle X-ray scattering (SAXS). Additionally, the modified bottlebrush copolymer was cross-linked to an elastomer that exhibits increased dielectric permittivity and good mechanical properties with significant strain stiffening, an attractive property of dielectric elastomer generators. It has a relative permittivity of 5.24, strain at break of 290%, elastic modulus at 10% strain of 380 kPa, a breakdown field of 62 V μm-1, and a small actuation of 5% at high electric fields of 48.5 V μm-1. All of these characteristics are attractive for dielectric elastomer generator applications. The current work is a milestone in designing functional elastomers based on bottlebrush polymers for transducer applications.

Synthesis and characterization of poly(ethylene glycol) bottlebrush networks via ring-opening metathesis polymerization

Herein it is reported how the overlap concentration (C*) can be used to overcome crosslinking due to diol impurities in commercial PEG, allowing for the synthesize of bottlebrush polymers with good control over molecular weight. Additionally, PEG-based bottlebrush networks are synthesized via ROMP, attaining high conversions with minimal sol fractions (<2%). The crystallinity and mechanical properties of these networks are then further altered by solvent swelling with phosphate buffer solution (PBS) and 1-ethyl-3-methylimidazolium ethyl sulfate/DCM cosolvents. The syntheses reported here highlight the potential of the bottlebrush network architecture for use in the rational design of new materials.

Topologically Precise and Discrete Bottlebrush Polymers: Synthesis, Characterization, and Structure-Property Relationships

As the complexity of polymer structure grows, so do the challenges for developing an accurate understanding of their structure-property relationships. Here, the synthesis of bottlebrush polymers with topologically precise and fully discrete structures is reported. A key feature of the strategy is the synthesis of discrete macromonomer libraries for their polymerization into topologically precise bottlebrushes that can be separated into discrete bottlebrushes (Đ = 1.0). As the system becomes more discrete, packing efficiency increases, distinct three-phase Langmuir-Blodgett isotherms are observed, and its glass transition temperature becomes responsive to side-chain sequence. Overall, this work presents a versatile strategy to access a range of precision bottlebrush polymers and unravels the impact of side-chain topology on their macroscopic properties. Precise control over side chains opens a pathway for tailoring polymer properties without changing their chemical makeup.

Evidence of Many-Body Interactions in the Virial Coefficients of Polyelectrolyte Gels

Simulation studies of aqueous polymer solutions, and heuristic arguments by De Gennes for aqueous polyethylene oxide polymer solutions, have suggested that many-body interactions can give rise to the ‘anomalous’ situation in which the second osmotic virial coefficient is positive, while the third virial coefficient is negative. This phenomenon was later confirmed in analytic calculations of the phase behavior and the osmotic pressure of complex fluids exhibiting cooperative self-assembly into extended dynamic polymeric structures by Dudowicz et al. In the present study, we experimentally confirm the occurrence of this osmotic virial sign inversion phenomenon for several highly charged model polyelectrolyte gels (poly(acrylic acid), poly(styrene sulfonate), DNA, hyaluronic acid), where the virial coefficients are deduced from osmotic pressure measurements. Our observations qualitatively accord with experimental and simulation studies indicating that polyelectrolyte materials exhibit supramolecular assembly in solution, another symptomatic property of fluids exhibiting many-body interactions. We also find that the inversion in the variation of the second (A₂) and third (A₂) virial coefficients upon approach to phase separation does not occur in uncharged poly(vinyl acetate) gels. Finally, we briefly discuss the estimation of the osmotic compressibility of swollen polyelectrolyte gels from neutron scattering measurements as an alternative to direct, time-consuming and meticulous osmotic pressure measurements. We conclude by summarizing some general trends and suggesting future research directions of natural and synthetic polyelectrolyte hydrogels.

Radical–radical coupling effects in the direct-growth grafting-through synthesis of bottlebrush polymers using RAFT and ROMP

The direct-growth technique was used to synthesize macromonomers from four classes of vinyl monomers, and the influence of monomer type and conversion on coupling reactions was followed in grafting-through ring-opening metathesis polymerization.

From macromonomers to bottlebrush copolymers with sequence control: synthesis, properties, and applications

Bottlebrush polymers (BBPs) are a type of comb-like macromolecules with densely grafted polymeric sidechains attached to the polymer backbones, and many intriguing properties and applications have been demonstrated due to...

Comparative experimental and computational study of synthetic and natural bottlebrush polyelectrolyte solutions

We systematically investigate model synthetic and natural bottlebrush polyelectrolyte solutions through an array of experimental techniques (osmometry and neutron and dynamic light scattering) along with molecular dynamics simulations to characterize and contrast their structures over a wide range of spatial and time scales. In particular, we perform measurements on solutions of aggrecan and the synthetic bottlebrush polymer, poly(sodium acrylate), and simulations of solutions of highly coarse-grained charged bottlebrush molecules having different degrees of side-branch density and inclusion of an explicit solvent and ion hydration effects. While both systems exhibit a general tendency toward supramolecular organization in solution, bottlebrush poly(sodium acrylate) solutions exhibit a distinctive "polyelectrolyte peak" in their structure factor, but no such peak is observed in aggrecan solutions. This qualitative difference in scattering properties, and thus polyelectrolyte solution organization, is attributed to a concerted effect of the bottlebrush polymer topology and the solvation of the polymer backbone and counterions. The coupling of the polyelectrolyte topological structure with the counterion distribution about the charged polymer molecules along with direct polymer segmental hydration makes their solution organization and properties "tunable," a phenomenon that has significant ramifications for biological function and disease as well as for numerous materials applications.

Jones R, Lou J, Xia Y. Systematic investigation of synthetic polyelectrolyte bottlebrush solutions by neutron and dynamic light scattering, osmometry, and molecular dynamics simulation

There is a great interest in the synthesis and characterization of polyelectrolytes that mimic naturally occurring bottlebrush polyelectrolytes to capitalize on the unique properties of this class of macromolecules. Charged bottlebrush polymers form the protective mucus layer in the lungs, stomach, and orifices of animals and provide osmotic stabilization and lubrication to joints. In the present work, we systematically investigate bottlebrush poly(sodium acrylates) through a combination of measurements of solution properties (osmometry, small-angle neutron scattering, and dynamic light scattering) and molecular dynamics simulations, where the bottlebrush properties are compared in each case to their linear polymer counterparts. These complementary experimental and computational methods probe vastly different length- and timescales, allowing for a comprehensive characterization of the supermolecular structure and dynamics of synthetic polyelectrolyte bottlebrush molecules in solution.

Supramolecular behaviour and fluorescence of rhodamine-functionalised ROMP polymers

A ROMP platform leading to rhodamine B containing amphiphilic block copolymers, which self-assemble into micelles which are able to sequester molecular dyes and interact with them by energy transfer. The polymer micelles do not interact with DNA.

Self-assembly of giant bottlebrush block copolymer surfactants from luminescent organic electronic materials

Bottlebrush copolymers have shown promise as building blocks for self-assembled nanomaterials due to their reduced chain entanglement relative to linear polymers and their ability to self-assemble with remarkably low critical micelle concentrations (CMCs). Concurrently, the preparation of bottlebrush polymers from organic electronic materials has recently been described, allowing multiple optoelectronic functions to be incorporated along the length of single bottlebrush strands. Here we describe the self-assembly of bottlebrush surfactants containing soluble n-butyl acrylate blocks and carbazole-based organic semiconductors, which self-assemble in selective solvent to give spherical micelles with CMCs below 54 nM. These narrowly dispersed structures were stable in solution at high dilution over periods of months, and could further be functionalized with fluorescent dyes to give micelles with quantum yields of 100%. These results demonstrate that bottlebrush-based nanostructures can be formed from organic semiconductor building blocks, opening the door to the preparation of fluorescent or redox-active micelles from giant polymeric surfactants.

Grubbs' and Schrock's Catalysts, Ring Opening Metathesis Polymerization and Molecular Brushes-Synthesis, Characterization, Properties and Applications

In this review, molecular brushes and other macromolecular architectures bearing a bottlebrush segment where the main chain is synthesized by ring opening metathesis polymerization (ROMP) mediated by Mo or Ru metal complexes are considered. A brief review of metathesis and ROMP is presented in order to understand the problems and the solutions provided through the years. The synthetic strategies towards bottlebrush copolymers are demonstrated and each one discussed separately. The initiators/catalysts for the synthesis of the backbone with ROMP are discussed. Syntheses of molecular brushes are presented. The most interesting properties of the bottlebrushes are detailed. Finally, the applications studied by different groups are presented.

Cholesteric–azobenzene liquid crystalline copolymers: design, structure and thermally responsive optical properties

We report the synthesis of new functional cholesteric–azobenzene side-chain liquid crystalline copolymers and terpolymers, their temperature-responsive mesophase behavior, and stimuli responsive photonic properties from 400 nm to the near infra-red region of the electromagnetic spectra.

Efficient and Facile End Group Control of Living Ring-Opening Metathesis Polymers via Single Addition of Functional Cyclopropenes

Living ROMP has become an important technique for preparing well-controlled, highly functional polymers; however, installing functional groups at the end of living ROMP polymers is not as straightforward as ROMP itself. We report a simple, efficient strategy to introduce functionalities at the chain end of living polynorbornenes via highly selective single addition of disubstituted 1,1-cyclopropenes (CPEs) with no homopropagation. Unlike many other methods for ROMP chain end functionalization, our method does not result in catalyst termination, allowing for further functionalization after CPE addition. The remarkable reactivity of such CPEs allowed for quantitative chain end functionalization to install a variety of useful functionalities, including halides, aldehydes, ketones, amines, and dyes, without using a large excess of CPEs. These polymer chain ends can be readily modified using a range of postpolymerization modifications.

One-Shot Synthesis and Melt Self-Assembly of Bottlebrush Copolymers with a Gradient Compositional Profile

Morphological control plays a central role in soft materials design. Herein, we report the synthesis of a gradient bottlebrush architecture and its role in directing molecular packing in the solid state. Bottlebrush copolymers with gradient interfaces were prepared via one-shot ring-opening metathesis polymerization of exo- and endo-norbornene-capped macromonomers. Kinetic studies revealed a gradient compositional profile separating the two blocks along the backbone. Side-chain symmetric gradient bottlebrush copolymers exhibited a strong tendency to assemble into cylindrical microstructures, in contrast to their block copolymer analogs with sharp interfaces. Such exquisite architectural control of the interfacial composition affords a delicate handle to direct macromolecular assembly.

Scalable Synthesis of Multivalent Macromonomers for ROMP

The polymerization of functional monomers provides direct access to functional polymers without need for postpolymerization modification; however, monomer synthesis can become a bottleneck of this approach. New methods that enable rapid installation of functionality into monomers for living polymerization are valuable. Here, we report the three-step convergent synthesis (two-step longest linear sequence) of a divalent exo-norbornene imide capable of efficient coupling with various nucleophiles and azides to produce diversely functionalized branched macromonomers optimized for ring-opening metathesis polymerization (ROMP). In addition, we describe an efficient iterative procedure for the synthesis of tri-and tetra-valent branched macromonomers. We demonstrate the use of these branched macromonomers for the synthesis of Janus bottlebrush block copolymers as well as for the generation of bottlebrush polymers with up to three conjugated small molecules per repeat unit. This work significantly expands the scalability and diversity of nanostructured macromolecules accessible via ROMP.

Compressing and Swelling To Study the Structure of Extremely Soft Bottlebrush Networks Prepared by ROMP

To fully explore bottlebrush polymer networks as potential model materials, a robust and versatile synthetic platform is required. Ring-opening metathesis polymerization is a highly controlled, rapid, and functional group tolerant polymerization technique that has been used extensively for bottlebrush polymer generation but to this point has not been used to synthesize bottlebrush polymer networks. We polymerized a mononorbornene macromonomer and dinorbornene cross-linker (both poly(n-butyl acrylate)) with Grubbs' third-generation catalyst to achieve bottlebrush networks and in turn demonstrated control over network properties as the ratio of macromonomer and cross-linker was varied. Macromonomer to cross-linker ratios ([ MM ] / [ XL ] ) of 10 to 100 were investigated, of which all derivative networks yielded gel fractions over 90%. Because of its amenability toward small samples, contact adhesion testing was used to quantify dry-state shear modulus G , which ranged from 1 to 10 kPa, reinforcing that bottlebrush polymer networks can achieve low moduli in the dry state compared to other polymer network materials through the mitigation of entanglements. A scaling relationship was found such that G ∼ ( [ MM ] / [ XL ] ) - 0.81 , indicating that macromonomer to cross-linker ratio is a good estimator of cross-linking density. The swelling ratio in toluene, Q , was compared to dry-state modulus to test the universal scaling relationship for linear networks G ∼ Q - 1.75 , and a measured exponent of -1.71 indicated good agreement. The synthetic platform outlined here represents a highly flexible route to a myriad of different bottlebrush networks and will increase the accessibility of materials critical to applications ranging from fundamental to biomedical.

Catechol- and ketone-containing multifunctional bottlebrush polymers for oxime ligation and hydrogel formation

We report the synthesis of a highly-functional macromonomer, and subsequent crosslinkable poly(ethylene glycol) (PEG)-based bottlebrush polymers prepared via graft-through ring-opening metathesis polymerization (ROMP).

Antiviral Agents from Multivalent Presentation of Sialyl Oligosaccharides on Brush Polymers

Bioinspired brush polymers containing α-2,6-linked sialic acids at the side chain termini were synthesized by protection-group-free, ring-opening metathesis polymerization. Polymers showed strain-selective antiviral activity through multivalent presentation of the sialosides. The multivalent effect was further controlled by independently varying the degree of polymerization, the number density of sialic acids, and the length of side chains in the brush polymers. Optimizing the three-dimensional sialoside spacing for better binding to hemagglutinin trimers was of critical importance to enhance the multivalent effect and the antiviral activity determined by hemagglutination inhibition assays and in vitro infection assays. By taking advantage of their structural similarities with native mucins, these brush polymers can be used as model systems to dissect the intricate design principles in natural mucins.