Polyallene-block-polythiophene-block-polyallene Copolymers: One-Pot Synthesis, Helical Assembly, and Multiresponsiveness

Helix-Induced Asymmetric Self-Assembly of π-Conjugated Block Copolymers: From Controlled Syntheses to Distinct Properties

Conspectusπ-Conjugated polymers have gained significant interest because of their potential applications in optoelectronics, bioelectronics, and other domains. The controlled synthesis of π-conjugated block polymers optimizes their performance and enables novel properties and functions. However, precise control of the self-assembled architectures of π-conjugated polymers remains a formidable challenge. Inspired by the precise helical architectures of biomacromolecules, the helical polymers and the supramolecular helical assemblies have gained significant attention. Helical polymers with an excess of one-handed helicity can be optically active with a strong tendency toward self-assembly. Incorporating a helical polymer into a π-conjugated polymer can induce asymmetric helical assemblies, leading to novel chiral materials with unique functionalities.To control the self-assembly of architectures, π-conjugated polymers are usually synthesized into block copolymers by incorporating a polymer with self-assembling characteristics. Although various π-conjugated block copolymers have been produced, precise and asymmetric self-assembly is still challenging and has rarely been addressed. Incorporating helical polymers into the π-conjugated polymers can induce a precise and asymmetric self-assembly, which transfers the chirality of the helical polymer block to the π-conjugated polymer, resulting in chiral supramolecular architectures with unique chiroptical properties and functionalities. However, synthesizing hybrid block copolymers containing two distinct polymer blocks is complicated. Some general strategies such as connecting the chain ends of two preformed homopolymers and extending the chain of a prefabricated π-conjugated polymer with a second monomer are time-consuming and require complex synthetic protocols. Therefore, developing novel strategies for the facile synthesis of π-conjugated block copolymers with a predictable molar mass, low dispersity, and tunable composition is of practical importance.Recently, we investigated a controlled synthesis of helical polyisocyanides, helical polyallenes, and helical polycarbenes by developing advanced Pd(II) and Ni(II) catalysts. These helical polymers were successfully incorporated into π-conjugated polymers, including polythiophene, polyfluorene, and poly(phenyleneethynylene), via a one-pot sequential living block polymerization of the two distinct monomers using Pd(II)- or Ni(II)-complexes as catalysts. As a result, a variety of well-defined π-conjugated block copolymers containing helical polymeric blocks were readily synthesized. Although the copolymerized monomers possess different structures and polymerization mechanisms, the one-pot block copolymerization followed a living polymerization mechanism and provided the desired π-conjugated block copolymers in high yields with controlled molar mass, narrow size distribution, and tunable composition.Remarkably, the helical polymeric block induces the π-conjugated block copolymer asymmetric self-assembly into a supramolecular, one-handed helical architecture resulting in distinct optical properties. More interestingly, by utilizing the crystallization of conjugated blocks and one-handed helical blocks, the crystallization-driven and helix-induced precise asymmetric living self-assembly yielded a family of uniform and single-handed helical architectures with controlled dimensions, narrow distribution, and well-defined helicity. The transfer of helical chirality to the supramolecular architectures rendered the achiral π-conjugated blocks with unique chiroptical properties such as the emission of white light over a broad optical spectrum and the circularly polarized luminescence.

Nickel(II)-catalyzed living polymerization of diazoacetates toward polycarbene homopolymer and polythiophene-block-polycarbene copolymers

Diazoacetate polymerization has attracted considerable research attention because it is an effective approach for fabricating carbon–carbon (C–C) main chain polymers. However, diazoacetate polymerization based on inexpensive catalysts has been a long-standing challenge. Herein, we report a Ni(II) catalyst that can promote the living polymerization of various diazoacetates, yielding well-defined C–C main chain polymers, polycarbenes, with a predictable molecular weight (M_n) and low dispersity (M_w/M_n). Moreover, the Ni(II)-catalyzed sequential living polymerization of thiophene and diazoacetate monomers affords interesting π-conjugated poly(3-hexylthiophene)-block-polycarbene copolymers in high yields with a controlled M_n, variable compositions, and low M_w/M_n, although the structure and polymerization mechanism of the two monomers differ. Using this strategy, amphiphilic block copolymers comprising hydrophobic poly(3-hexylthiophene) and hydrophilic polycarbene blocks are facilely prepared, which were self-assembled into well-defined supramolecular architectures with tunable photoluminescence.

Diazoacetate polymerizations using inexpensive catalysts has been a long-standing challenge to achieve. Here the authors report a Ni(II) catalyst that can promote living polymerization of various diazoacetates, yielding well-defined carbon–carbon main chain polymers, polycarbenes.

Synthesis of Double-Bonds-Containing Diblock Copolymers via RAFT Polymerization

Polyallenes that present internal double bonds are attractive platforms for the development of diverse functional materials. However, the controlled block copolymerization of allene derivatives with precise structure and designable architecture...

Recent Advances in Polyallenes: Preparation, Self-Assembly, and Stimuli-Responsiveness

Polyallenes, as a typical type of reactive polymers, are of great significance and have aroused widespread interest because they contain double bonds that can be post-modified into other functionalities to afford varieties of functional materials. This Minireview firstly highlights the recent advances in the preparation of polyallenes, including preparation of helical polyallenes through directly polymerization of chiral allene monomers or helix-sense-selective polymerization (HSSP) of achiral allene monomers, synthesis of 1,2-regulated polyallenes and 2,3-regulated polyallenes via selective polymerization of allene monomers, polymerization of allene monomers catalyzed by Ni(II)-terminated poly(3-hexylthiophene) (P3HT), and so on. Then, latest progress on the self-assembly and stimuli-responses of polyallene-based diblock, ABA and ABC triblock copolymers is summarized. We hope this Minireview will inspire more interest in developing polyallenes and encourage further advances in functional materials.

Helical polymer self-assembly and chiral nanostructure formation

This review surveys recent progress towards robust chiral nanostructure fabrication techniques using synthetic helical polymers, the unique inferred properties that these materials possess, and their intricate connection to natural, biological chirality.

Creation of polymeric nanostructures by living coordination block copolymerization of allene derivatives with fluoroalkyl substituents under polymerization-induced self-assembly conditions and their application to superhydrophobic surfaces

Block copolymer micelles with a fluorous corona were synthesized via living allene polymerization in fluorous media and a polymerization-induced self-assembly (PISA) process, resulting in excellent superhydrophobic optically transparent coatings.

First polyallene-based well-defined amphiphilic diblock copolymer via RAFT polymerization

We report the first well-defined amphiphilic diblock copolymer via allene and vinyl monomers.

Highly 2,3-selective and fast living polymerization of alkyl-, alkoxy- and phenylallenes using nickel(ii) catalysts

A novel Ni(ii) catalyst was developed to initiate the polymerization of various allene monomers efficiently in a fast and living/controlled manner, and the thermodynamic and crystallization properties of the polymers were investigated.

Crystallization-Driven Asymmetric Helical Assembly of Conjugated Block Copolymers and the Aggregation Induced White-light Emission and Circularly Polarized Luminescence

Controlling the self-assembly morphology of π-conjugated block copolymer is of great interesting. Herein, amphiphilic poly(3-hexylthiophene)-block-poly(phenyl isocyanide)s (P3HT-b-PPI) copolymers composed of π-conjugated P3HT and optically active helical PPI segments were readily prepared. Taking advantage of the crystallizable nature of P3HT and the chirality of the helical PPI segment, crystallization-driven asymmetric self-assembly (CDASA) of the block copolymers lead to the formation of single-handed helical nanofibers with controlled length, narrow dispersity, and well-defined helicity. During the self-assembly process, the chirality of helical PPI was transferred to the supramolecular assemblies, giving the helical assemblies large optical activity. The single-handed helical assemblies of the block copolymers exhibited interesting white-light emission and circularly polarized luminescence (CPL). The handedness and dissymmetric factor of the induced CPL can be finely tuned through the variation on the helicity and length of the helical nanofibers.

Ultrathin Polymer Nanofibrils for Solar-Blind Deep Ultraviolet Light Photodetectors Application

Solar-blind deep ultraviolet photodetectors (DUVPDs) based on conventional inorganic ultrawide bandgap semiconductors (UWBS) have shown promising application in various civil and military fields and yet they can hardly be used in wearable optoelectronic devices and systems for lack of mechanical flexibility. In this study, we report a non-UWBS solar-blind DUVPD by designing ultrathin polymer nanofibrils with a virtual ultrawide bandgap, which was obtained by grafting P3HT with PHA via a polymerization process. Optoelectronic analysis reveals that the P3HT-b-PHA nanofibrils are sensitive to DUV light with a wavelength of 254 nm but are virtually blind to both 365 nm and other visible light illuminations. The responsivity is 120 A/W with an external quantum efficiency of up to 49700%, implying a large photoconductive gain in the photoresponse process. The observed solar-blind DUV photoresponse is associated with the resonant mode due to the leakage mode of the ultrathin polymer nanofibrils. Moreover, a flexible image sensor composed of 10 × 10 pixels can also be fabricated to illustrate their capability for image sensing application. These results signify that the present ultrathin P3HT-b-PHA nanofibrils are promising building blocks for assembly of low-cost, flexible, and high-performance solar-blind DUVPDs.

New strategy for synthesis of hydroxyl-terminated poly(3-hexylthiophene) and its block copolymer using an η3-π-allyl hydroxyl-functionalized Ni(i) initiator

A novel hydroxyl-terminated π-allyl nickel initiator [η³-Ni(CH₂CHCHCH₂OCOCH₃)][BPh^F₄] is synthesized for the first time. ¹H-NMR analysis confirms that the Ni initiator possesses a typical π-allyl structure with a protected hydroxyl group. The Ni initiator is applied to synthesize hydroxyl-terminated poly(3-hexylthiophene). It successfully initiates the homopolymerization of thiophene, and yields narrow molecular weight distribution, hydroxyl-terminated poly(3-hexylthiophene). Moreover, it is found that [η³-Ni(CH₂CHCHCH₂OCOCH₃)][BPh^F₄] has high initiating activity in the polymerization of styrene and butadiene. A hydroxyl-terminated polybutadiene-b-poly(3-hexylthiophene) block copolymer is synthesized by using [η³-Ni(CH₂CHCHCH₂OCOCH₃)][BPh^F₄] to improve the workability and brittleness of poly(3-hexylthiophene).

A novel hydroxyl-terminated π-allyl nickel initiator is synthesized for the first time. Hydroxyl-terminated PB-b-P3HT block copolymer and hydroxyl-terminated P3HT are synthesized by using the initiator to improve the workability of P3HT.

Recent developments in the synthesis of regioregular thiophene-based conjugated polymers for electronic and optoelectronic applications using nickel and palladium-based catalytic systems

Thiophene-based conjugated polymers are important conjugated polymers due to their exceptional optical and conductive properties, over the past few decades many researchers have designed novel strategies to reach more efficient materials for electronic applications.

Chiral expression in conjugated helical block copolymers

The organizational behaviour of block copolymers consisting of two helical blocks with opposite chiral expression is investigated.

Dual stimuli-responsive copolymers with precisely arranged degradable units: synthesis by controlled alternating copolymerization of oxyethylene-containing vinyl ethers and conjugated aldehydes

Thermoresponsive polymers with precisely arranged degradable units were synthesized via controlled cationic copolymerization of oxyethylene-containing vinyl ethers and conjugated aldehydes.

Hydrogen-bonding-directed helical nanofibers in a polythiophene-based all-conjugated diblock copolymer

One-dimensional (1D) helical nanofibers were prepared through the self-assembly of an achiral all-conjugated diblock copolymer, poly(3-hexylthiophene)-b-poly[3-(6-hydroxyl)hexylthiophene] (P3HT-b-P3HHT) in an aged pyridine solution. Such helical nanofibers were formed by the π-π interaction between planar rigid polythiophene backbones cooperating with the hydrogen-bonding interactions between the polar hydroxyl groups of the side chains of polythiophenes. Intriguingly, the Young's modulus of such helical fibers is as high as ∼5.16 GPa, which is about twice that of P3HT films characterized by the peak force quantitative nanomechanical (PF-QNM) method. Furthermore, for the first time, we report that such helical fibers based on all-conjugated polythiophenes exhibited a relatively high field-effect mobility of 0.03472 cm2 V-1 s-1. This work provides a promising approach to craft crystalline helical nanostructures based on polythiophenes possessing both superior mechanical and good charge transport properties, which has great potential for application in other π-conjugated systems or building blocks for complex superstructures, and mechanical and optoelectronic devices.

Helical Nanofibrils of Block Copolymer for High-Performance Ammonia Sensors

Conjugated polymers with a helical structure have been in rapid development in recent years because of their potential applications in chemical and biological sensors. We demonstrate the fabrication and characterization of helical nanofibrils of block copolymer poly(4-iso-cyano-benzoic acid 5-(2-dimethylamino-ethoxy)-2-nitro-benzylester)- b-poly(3-hexylthiophene) (PPI(-DMAENBA)- b-P3HT) via a transfer-etching method. The density and lateral length of nanofibrils can be facilely controlled by regulating the process conditions, which, in turn, directly determine the electronic property. Organic field effect transistors based on helical nanofibrils were successfully fabricated with the highest mobility of 9.1 × 10^-3 cm²/(V s)^-1, an on/off ratio of 3.4 × 10⁵, and high bias stability. The helical nanofibrils were proved to be beneficial for obtaining a highly sensitive and selective chemical sensor. And, the transistor based on helical nanofibrils exhibits a relative response of 28.6% to 100 ppb ammonia, which is even much higher than the responses to 1 ppm ammonia for homo poly(3-hexylthiophene) nanofibrils (7%) and block copolymer nanofibrils without helical structure (0.9%). The combination of helical structure with nanofibrils may provide a new strategy to fabricate high-performance chemical sensors suitable for use in environmental monitoring, industrial and agricultural production, health care, and foodsafety.

Facile Synthesis of Optically Active and Thermoresponsive Star Block Copolymers Carrying Helical Polyisocyanide Arms and Their Thermo-Triggered Chiral Resolution Ability

A left-handed helical poly(phenyl isocyanide) bearing a norbornene unit and a Pd(II) complex on each terminus was prepared. The norbornene terminus was core cross-linked with a bisnorbornene linker via ring-opening metathesis polymerization (ROMP), yielding a star polymer carrying left-handed helical arms decorated with Pd(II) units at the exterior. The optical activities of the helical arms were maintained after the cross-linking reaction. The Pd(II) units on the surface of the star polymer were chain extended with a new phenyl isocyanide bearing three hydrophilic triethylene glycol monomethyl chains, which afforded an amphiphilic star block copolymer carrying helical arms. Such a star block copolymer showed excellent thermoresponsiveness with the lower critical solution temperature (LCST) around 55 °C. This optically active and thermoresponsive star polymer can enantioselectively capture the S-enantiomer of racemic methyl benzyl alcohol solution at a temperature lower than the LCST and precipitated when the temperature was higher than the LCST, leaving the R-enantiomer in the solution. The enantiomeric excess (ee) of the isolated enantiomer is up to 75%.

Synthesis and thermo-responsive behavior of helical polyacetylenes derived from proline

Structurally simple, biomass-based helical polyacetylene exhibits an unexpected lower critical solution temperature in an aqueous solution with a narrow phase-transition window and a small hysteresis.

One-pot synthesized ABA tri-block copolymers for high-performance organic field-effect transistors

A series of P3HT-b-PHA-b-P3HT tri-block copolymers were synthesized in one pot and fabricated into organic field-effect transistors by a blending method.

Double-bond-containing polyallene-based triblock copolymers via phenoxyallene and (meth)acrylate

A series of ABA triblock copolymers, consisting of double-bond-containing poly(phenoxyallene) (PPOA), poly(methyl methacrylate) (PMMA), or poly(butyl acrylate) (PBA) segments, were synthesized by sequential free radical polymerization and atom transfer radical polymerization (ATRP). A new bifunctional initiator bearing azo and halogen-containing ATRP initiating groups was first prepared followed by initiating conventional free radical homopolymerization of phenoxyallene with cumulated double bond to give a PPOA-based macroinitiator with ATRP initiating groups at both ends. Next, PMMA-b-PPOA-b-PMMA and PBA-b-PPOA-b-PBA triblock copolymers were synthesized by ATRP of methyl methacrylate and n-butyl acrylate initiated by the PPOA-based macroinitiator through the site transformation strategy. These double-bond-containing triblock copolymers are stable under UV irradiation and free radical circumstances.

PDMAEMA-b-PPOA-b-PDMAEMA double-bond-containing amphiphilic triblock copolymer: synthesis, characterization, and pH-responsive self-assembly

This article reports a new pH-responsive double-bond-containing ABA triblock copolymer synthesized via a combination of free radical polymerization and SET-LRP.

ATRP synthesis of polyallene-based amphiphilic triblock copolymer

This article reports the synthesis of a new amphiphilic double-bond-containing ABA triblock copolymer by a combination of free radical polymerization and ATRP.

Polyallene-based amphiphilic triblock copolymer via successive free radical polymerization and ATRP

This article reports the synthesis of amphiphilic double-bond-containing ABA triblock copolymer by a combination of free radical polymerization and ATRP.

Synthetic approaches towards structurally-defined electrochemically and (photo)redox-active polymer architectures

This review details synthetic strategies leading to structurally-defined electrochemically and (photo)redox-active polymer architectures,e.g.block, graft and end functionalized (co)polymers.

Photocleavable amphiphilic diblock copolymer with an azobenzene linkage

Diblock copolymer with an azobenzene linkage can be efficiently photocleaved upon UV light irradiation. Thus, the colloidal aggregates of this kind of amphiphilic diblock copolymer will be disrupted due to the cleavage of the azobenzene junction.