Controlled Organocatalytic Ring-Opening Polymerization of ε-Thionocaprolactone

General and Mild Method for the Synthesis of Polythioesters from Lactone Feedstocks

Polythioesters are attracting increasing interest in applications requiring degradability or recyclability. However, few general methods exist for the synthesis of these polymers. This report presents a fast and versatile method for synthesizing polythioesters from readily available lactone feedstocks. The two-step process begins with the thionation of lactones to thionolactones, followed by the ring-opening polymerization of the thionolactones to polythioesters. Unlike previous methods that rely on harsh reagents to accomplish this transformation, we demonstrate that the mild tetrabutylammonium thioacetate is a competent initiator for polymerization. This method exhibits broad applicability, as demonstrated by the successful polymerizations of an unstrained 17-membered macrocycle and an N-substituted cyclic thionocarbamate. Furthermore, the generality of this scheme enables the synthesis of polythioesters with highly tunable properties, as demonstrated here by the synthesis of a set of polymers with glass transition temperatures spanning 180 °C. Finally, the polythioesters are efficiently depolymerized into the corresponding thiolactones.

Unlocking the Potential of Polythioesters

As the demand for sustainable polymers increases, most research efforts have focused on polyesters, which can be bioderived and biodegradable. Yet analogous polythioesters, where one of the oxygen atoms has been replaced by a sulfur atom, remain a relatively untapped source of potential. The incorporation of sulfur allows the polymer to exhibit a wide range of favorable properties, such as thermal resistance, degradability, and high refractive index. Polythioester synthesis represents a frontier in research, holding the promise of paving the way for eco-friendly alternatives to conventional polyesters. Moreover, polythioester research can also open avenues to the development of sustainable and recyclable materials. In the last 25 years, many methods to synthesize polythioesters have been developed. However, to date no industrial synthesis of polythioesters has been developed due to challenges of costs, yields, and the toxicity of the by-products. This review will summarize the recent advances in polythioester synthesis, covering step-growth polymerization, ring-opening polymerization (ROP), and biosynthesis. Crucially, the benefits and challenges of the processes will be highlighted, paying particular attention to their sustainability, with the aim of encouraging further exploration and research into the fast-growing field of polythioesters.

Photochemical [2 + 2] Cycloaddition Enables the Synthesis of Highly Thermally Stable and Acid/Base-Resistant Polyesters from a Nonpolymerizable α,β-Conjugated Valerolactone

We report a simple strategy to transform a nonpolymerizable six-membered α,β-conjugated lactone, 5,6-dihydro-2H-pyran-2-one (DPO), into polymerizable bicyclic lactones via photochemical [2 + 2] cycloaddition. Two bicyclic lactones, M1 and M2, were obtained by the photochemical [2 + 2] cycloaddition of tetramethylethylene and DPO. Ring-opening polymerization (ROP) of M1 and M2 catalyzed by diphenyl phosphate (DPP), La[N(SiMe3)2]3, and 1-tert-butyl-4,4,4-tris(dimethylamino)-2,2-bis[tris (dimethylamino) phosphoranylide-namino]-2λ5, 4λ5-catenadi(phosphazene) (tBu-P4) were conducted. M1 is highly polymerizable, either DPP or La[N(SiMe3)2]3 could catalyze its living ROP under mild conditions, affording the well-defined PM1 with a predictable molar mass and low dispersity. M2 could only be polymerized with tBu-P4 as the catalyst, also generating the same polymer PM1. PM1 has high thermal stability, with a Td,5% being up to 376 °C. Ring-opening copolymerization (ROcP) of M1 and δ-valerolactone (δ-VL) catalyzed by La[N(SiMe3)2]3 afforded a series of random copolymers with enhanced thermal stabilities. Both PM1 and the copolymer containing 10 mol % M1 exhibited excellent resistance to acidic and basic hydrolysis. Our results demonstrate that direct photochemical [2 + 2] cycloaddition of α,β-conjugated valerolactone is not only a strategy to tune its polymerizability, but also allows for the synthesis of highly thermally stable aliphatic polyesters, inaccessible by other methods.

Sustainable Polythioesters via Thio(no)lactones: Monomer Synthesis, Ring-Opening Polymerization, End-of-Life Considerations, and Industrial Perspectives

As the environmental effects of plastics are of ever greater concern, the industry is driven towards more sustainable polymers. Besides sustainability, our fast-developing society imposes the need for highly versatile materials. Whereas aliphatic polyesters (PEs) are widely adopted and studied as next-generation biobased and (bio)degradable materials, their sulfur-containing analogs, polythioesters (PTEs), only recently gained attention. Nevertheless, the introduction of S atoms is known to often enhance thermal, mechanical, electrochemical, and optical properties, offering prospects for broad applicability. Furthermore, thanks to their thioester-based backbone, PTEs are inherently susceptible to degradation, giving them a high sustainability potential. The key route to PTEs is through ring-opening polymerization (ROP) of thio(no)lactones. This Review critically discusses the (potential) sustainability of the most relevant state-of-the-art in every step from sulfur source to end-of-life treatment options of PTEs, obtained through ROP of thio(no)lactones. The benefits and drawbacks of PTEs versus PEs are highlighted, including their industrial perspective.

Target Embolization Combined with Multimodal Thermal Ablation for Solid Tumors by Smart Poly(amino acid)s Nanocomposites

Noninterventional embolization does not require the use of a catheter, and the treatment of solid tumors in combination with thermal ablation can avoid some of the risks of the surgical procedure. Therefore, we developed an efficient tumor microenvironment-gelled nanocomposites with poly [(l-glutamic acid-ran-l-tyrosine)-b-l-serine-b-l-cysteine] (PGTSCs) coated-nanoparticles (Fe₃O₄&Au@PGTSCs), from which the prepared PGTSCs were given possession of pH response to an acidic tumor microenvironment. Fe₃O₄&Au@PGTSC in noninterventional embolization treatment not only achieved the smart targeted medicine delivery but also meshed with noninvasive multimodal thermal ablation therapy and multimodal imaging of solid tumors via intravenous injection. It was worth noting that the results of animal experiments in vivo demonstrated that Fe₃O₄&Au@PGTSCs have specific tumor accumulation and embolization and thermal ablation effects; at 10 days postinjection, only scars were found at the tumor site. After 20 days, the tumors of model mice completely disappeared. This device is easier to treat solid tumors based on the slightly acidic tumor environment.

Modulating Polymerization Thermodynamics of Thiolactones Through Substituent and Heteroatom Incorporation

A central challenge in the development of next-generation sustainable materials is to design polymers that can easily revert back to their monomeric starting material through chemical recycling to monomer (CRM). An emerging monomer class that displays efficient CRM are thiolactones, which exhibit rapid rates of polymerization and depolymerization. This report details the polymerization thermodynamics for a series of thiolactone monomers through systematic changes to substitution patterns and sulfur heteroatom incorporation. Additionally, computational studies highlight the importance of conformation in modulating the enthalpy of polymerization, leading to monomers that display high conversions to polymer at near-ambient temperatures, while maintaining low ceiling temperatures (T_c). Specifically, the combination of a highly negative enthalpy (-19.3 kJ/mol) and entropy (-58.4 J/(mol·K)) of polymerization allows for a monomer whose equilibrium polymerization conversion is very sensitive to temperature.

Introducing SuFEx click chemistry into aliphatic polycarbonates: a novel toolbox/platform for post-modification as biomaterials

As a biodegradable and biocompatible biomaterial, aliphatic polycarbonates (APCs) have attracted substantial attention in terms of post-polymerization modification (PPM) for functionalization. A strategy for the introduction of sulfur(VI)-fluoride exchange (SuFEx) click chemistry into APCs for PPM is proposed for the first time in this work. 4'-(Fluorosulfonyl)benzyl 5-methyl-2-oxo-1,3-dioxane-5-carboxylate (FMC) was designed as a SuFEx clickable cyclic carbonate for APCs via ring-opening polymerization (ROP), and an operational and nontoxic synthetic route was achieved. FMC managed to undergo both ROP and PPM through the SuFEx click chemistry organocatalytically without constraining or antagonizing each other, using 1,5,7-triazabicyclo[4,4,0]dec-5-ene (TBD) as a co-organocatalyst here. Its ROP was systematically investigated, and density functional theory (DFT) calculations were performed to understand the acid-base catalytic mechanism in the anionic ROP. Exploratory investigations into PPM by SuFEx of poly(FMC) were conducted as biomaterials, and the one-pot strategies to achieve both ROP and SuFEx were confirmed.

Synthesis of poly(thioester sulfonamide)s via the Ring-Opening Copolymerization of Cyclic Thioanhydride with N-Sulfonyl Aziridine Using Mild Phosphazene base

Providing access to diverse polymer structures is highly desirable, which helps to explore new polymer materials. Poly(thioester sulfonamide)s, combining both the advantages of thioesters and amides, however, have been rarely available in polymer chemistry. Here, we report the ring-opening copolymerization (ROCOP) of cyclic thioanhydride with N-sulfonyl aziridine using mild phosphazene base, resulting in well-defined poly(thioester sulfonamide)s with highly alternative structures, high yields, and controlled molecular weights. Additionally, benefiting from the mild catalytic process, this ROCOP can be combined with ROCOP of N-sulfonyl aziridines with cyclic anhydrides to produce novel block copolymers. This article is protected by copyright. All rights reserved.

Towards high-performance sustainable polymers via isomerization-driven irreversible ring-opening polymerization of five-membered thionolactones

The development of sustainable polymers that possess useful material properties competitive with existing petroleum-derived polymers is a crucial goal but remains a formidable challenge for polymer science. Here we demonstrate that irreversible ring-opening polymerization (IROP) of biomass-derived five-membered thionolactones is an effective and robust strategy for the polymerization of non-strained five-membered rings-these polymerizations are commonly thermodynamically forbidden under ambient conditions, at industrially relevant temperatures of 80-100 °C. Computational studies reveal that the selective IROP of these thionolactones is thermodynamically driven by S/O isomerization during the ring-opening process. IROP of γ-thionobutyrolactone, a representative non-strained thionolactone, affords a sustainable polymer from renewable resources that possesses external-stimuli-triggered degradability. This poly(thiolactone) also exhibits high performance, with its key thermal and mechanical properties comparing well to those of commercial petroleum-based low-density polyethylene. This IROP strategy will enable conversion of five-membered lactones, generally unachievable by other polymerization methods, into sustainable polymers with a range of potential applications.

Ring size-reactivity relationship in radical ring-opening copolymerisation of thionolactones with vinyl pivalate

The radical ring-opening copolymerisation of unsubstituted thionolactones of different ring sizes has been investigated. DFT calculations and experimental results show the importance of the stabilization of the intermediate ring-retained radical.

Recent advances in the ring-opening polymerization of sulfur-containing monomers

Inspired by the broad range of applications for sulfur-containing polymers, this article presents an overview regarding various ROP technologies (ROP/rROP/ROMP) which cement the importance of sulfur-containing monomers in modern polymer chemistry.

Thiocarbonyl Chemistry in Polymer Science

Organised by reaction type, this review highlights the unique reactivity of thiocarbonyl (C=S) groups with radicals, anions, nucleophiles, electrophiles, in pericyclic reactions, and in the presence of light. In the...

Heparin-like anticoagulant polypeptides with tunable activity: Synthesis, characterization, anticoagulative properties and clot solubilities in vitro

Due to the uncontrollable anticoagulant activity and limited source, Heparin, which is commonly used in clinical anticoagulation therapies, faces the risk of spontaneous bleeding and thrombocytopenia. Herein, a series of anionic poly(amino acid) s poly (l-Serine-ran-L-Glutamic acid-ran-L-Cysteine-SO₃) (PSEC-SO₃) were prepared by the controlled Ring Opening Polymerization (ROP) of N-Carboxyanhydrides (NCAs). The anticoagulant activities of PSEC-SO₃ can be regulated by simply adjusting the feeding ratio of monomers. In vitro tests show that these polypeptides can effectively prolong the Activated Partical Thromboplastin Time (APTT) and inhibit Factor IIa and Factor Xa, but has no significant effect on Prothrombin Time (PT) and Thrombin Time (TT), which indicates that PSEC-SO₃ mainly act on the intrinsic pathway. In summary, the activity-tunable heparin-like polypeptides are expected to have good application prospects in the anticoagulant field.

The synthesis of degradable sulfur-containing polymers: precise control of structure and stereochemistry

This review comprehensively summarized the recent progresses made in the precise synthesis of sulfur-containing polymers from the structure control, stereochemistry control and the topological structure modification aspects.

ε-Thionocaprolactone: an accessible monomer for preparation of degradable poly(vinyl esters) by radical ring-opening polymerization

Readily accessible ε-thionocaprolactone can be copolymerized with vinyl esters under radical polymerization conditions to produce copolymers containing degradable thioester and thioacetal linkages.

Organocatalytic ring-opening polymerization of thionolactones: anything O can do, S can do better

Organocatalysts facilitate the synthesis of polythionolactones; oxidative crosslinking yields a degradable polymer foam.

Block copolymer composition drives function of self-assembled nanoparticles for delivery of small-molecule cargo

Nanoparticles are useful for the delivery of small molecule therapeutics, increasing their solubility, in vivo residence time, and stability. Here, we used organocatalytic ring opening polymerization to produce amphiphilic block copolymers for the formation of nanoparticle drug carriers with enhanced stability, cargo encapsulation, and sustained delivery. These polymers comprised blocks of poly(ethylene glycol) (PEG), poly(valerolactone) (PVL), and poly(lactide) (PLA). Four particle chemistries were examined: (a) PEG-PLA, (b) PEG-PVL, (c) a physical mixture of PEG-PLA and PEG-PVL, and (d) PEG-PVL-PLA tri-block copolymers. Nanoparticle stability was assessed at room temperature (20 °C; pH = 7), physiological temperature (37 °C; pH = 7), in acidic media (37 °C; pH = 2), and with a digestive enzyme (lipase; 37 °C; pH = 7.4). PVL-based nanoparticles demonstrated the highest level of stability at room temperature, 37 °C and acidic conditions, but were rapidly degraded by lipase. Moreover, PVL-based nanoparticles demonstrated good cargo encapsulation, but rapid release. In contrast, PLA-based nanoparticles demonstrated poor stability and encapsulation, but sustained release. The PEG-PVL-PLA nanoparticles exhibited the best combination of stability, encapsulation, and release properties. Our results demonstrate the ability to tune nanoparticle properties by modifying the polymeric architecture and composition. © 2019 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2019, 57, 1322-1332.

Productive Exchange of Thiols and Thioesters to Form Dynamic Polythioester-Based Polymers

Polymers that possess dynamic covalent bonds activated at ambient conditions are ideal platforms for smart, responsive materials. Herein, a class of dynamic covalent polymerizations is developed based on the thiol-thioester exchange, that is, transthioesterification, reaction. Shifts in the equilibrium extent of the exchange reactions are deliberately utilized to drive the formation of oligomers and polymers. In particular, a series of AB and A₂-B₂ monomers, including amino acid derivatives, were polymerized rapidly by catalytic amounts of mild bases in various organic solvents under ambient conditions. Thioester backbone oligopeptides, including cysteine and glycine, were obtained with an average repeating unit of four and a PDI of 1.8. Further, structurally dynamic hydrogels were obtained by such reactions between four-armed poly(ethylene glycol)-10000 based monomers in neutral water. These hydrogels showed dynamic, frequency-dependent flow behavior between sol and gel states.

Organocatalytic Ring-opening Polymerization Towards Poly(cyclopropane)s, Poly(lactame)s, Poly(aziridine)s, Poly(siloxane)s, Poly(carbosiloxane)s, Poly(phosphate)s, Poly(phosphonate)s, Poly(thiolactone)s, Poly(thionolactone)s and Poly(thiirane)s

The following chapter is a collection of monomers that undergo organocatalyzed ring-opening polymerizations and have not been covered in a separate chapter of this book. This includes polymers widely used in industrial applications, but also solely academically relevant and more “exotic” polymer classes. As most of these polymers contain heteroatoms in their backbone, the chapter is divided according to the respective heteroatoms. Each sub-section first gives a short introduction to the respective polymer or monomer properties and industrial applications (if available), followed by a brief summary of the traditional synthetic pathways. Afterwards, important milestones for the organocatalytic ROP are presented in chronological order. Special emphasis is put on the advantages and disadvantages of organocatalysis over traditional (ROP) methods on the basis of appropriate literature examples.

Triclocarban: Commercial Antibacterial and Highly Effective H-Bond Donating Catalyst for Ring-Opening Polymerization

The antibacterial compound, triclocarban (TCC), is shown to be a highly effective H-bond donating catalyst for ring-opening polymerization (ROP) when applied with an H-bond accepting base cocatalyst. These ROPs exhibit the characteristics of "living" polymerizations. TCC is shown to possess the high activity characteristic of urea (vs thiourea) H-bond donors. The urea class of H-bond donors is shown to remain highly active in H-bonding solvents, a trait that is not displayed by the corresponding thiourea H-bond donors. Two H-bond donating ureas that are electronically similar to TCC are evaluated for their efficacy in ROP, and a mechanism of action is proposed. This "off-the-shelf" H-bond donor is among the most active and most controlled organocatalysts for the ROP of lactones.

Squaramide and amine binary H-bond organocatalysis in polymerizations of cyclic carbonates, lactones, and lactides

Multiple combinations of six squaramides and eight amines as co-catalysts were success in ROPs of cyclic monomers by H-bond donor and acceptor binary catalysis that established a general protocol.