Catalytic Ring-Opening (Co)polymerization of Semiaromatic and Aliphatic (Macro)lactones

Simple magnesium alkoxides: synthesis, molecular structure, and catalytic behaviour in the ring-opening polymerization of lactide and macrolactones and in the copolymerization of maleic anhydride and propylene oxide

The synthesis of two chiral bulky alkoxide pro-ligands, 1-adamantyl-tert-butylphenylmethanol HOCAdtBuPh and 1-adamantylmethylphenylmethanol HOCAdMePh, is reported and their coordination chemistry with magnesium(II) is described and compared with the coordination chemistry of the previously reported achiral bulky alkoxide pro-ligand HOCtBu2Ph. Treatment of n-butyl-sec-butylmagnesium with two equivalents of the racemic mixture of HOCAdtBuPh led selectively to the formation of the mononuclear bis(alkoxide) complex Mg(OCAdtBuPh)2(THF)2. 1H NMR spectroscopy and X-ray crystallography suggested the selective formation of the C2-symmetric homochiral diastereomer Mg(OCRAdtBuPh)2(THF)2/Mg(OCSAdtBuPh)2(THF)2. In contrast, the less sterically encumbered HOCAdMePh led to the formation of dinuclear products indicating only partial alkyl group substitution. The mononuclear Mg(OCAdtBuPh)2(THF)2 complex was tested as a catalyst in different reactions for the synthesis of polyesters. In the ROP of lactide, Mg(OCAdtBuPh)2(THF)2 demonstrated very high activity, higher than that shown by Mg(OCtBu2Ph)2(THF)2, although with moderate control degrees. Both Mg(OCAdtBuPh)2(THF)2 and Mg(OCtBu2Ph)2(THF)2 were found to be very effective in the polymerization of macrolactones such as ω-pentadecalactone (PDL) and ω-6-hexadecenlactone (HDL) also under mild reaction conditions that are generally prohibitive for these substrates. The same catalysts demonstrated efficient ring-opening copolymerization (ROCOP) of propylene oxide (PO) and maleic anhydride (MA) to produce poly(propylene maleate).

Preparation and Properties of Benzylsulfonyl-Containing Silicone Copolymers via Ring-opening Copolymerization of Macroheterocyclosiloxane and Cyclosiloxane

Ring-opening copolymerization (ROCP) of benzylsulfonyl macroheterocyclosiloxane (BSM) and five different cyclosiloxanes was systematically investigated. A general approach for the synthesis of benzylsulfonyl-containing silicone copolymers with various substituents, including methyl, vinyl, ethyl, and phenyl, was developed herein. A series of copolymers with variable incorporation (from 6 % to 82 %) of BSM were obtained by modifying the comonomer feed ratio and using KOH as the catalyst in a mixed solvent of dimethylformamide and toluene. The obtained copolymers exhibited various composition-dependent properties and unique viscoelasticity. Notably, the surface and fluorescent characteristics as well as the glass transition temperatures of the copolymers could be tailored by varying the amount of BSM. Unlike typical sulfone-containing polymers, such as poly(olefin sulfone)s, the prepared copolymers displayed excellent thermal and hydrolytic stability. The universal strategy developed in the present study provides a platform for the design of innovative silicone copolymers with adjustable structures and performance.

Bioinspired All-Polyester Diblock Copolymers Made from Poly(pentadecalactone) and Poly(2-(2-hydroxyethoxy)benzoate): Synthesis and Polymer Film Properties

The bioinspired diblock copolymers poly(pentadecalactone)-block-poly(2-(2-hydroxyethoxy)-benzoate) (PPDL-block-P2HEB) were synthesized from pentadecalactone and dihydro-5H-1,4-benzodioxepin-5-one (2,3-DHB). No transesterification between the blocks was observed. In a sequential approach, PPDL obtained by ring-opening polymerization (ROP) was used to initiate 2,3-DHB. Here, the molar mass Mn of the P2HEB block was limited. In a modular approach, end-functionalized PPDL and P2HEB were obtained separately by ROP with functional initiators, and connected by 1,3-dipolar Huisgen reaction ("click-chemistry"). Block copolymer compositions from 85:15 mass percent to 28:72 mass percent (PPDL:P2HEB) were synthesized, with Mn of from about 30,000-50,000 g mol-1. The structure of the block copolymer was confirmed by proton NMR, FTIR spectroscopy, and gel permeation chromatography. Morphological studies by atomic force microscopy (AFM) further confirmed the block copolymer structure, while quantitative nanomechanical AFM measurements revealed that the DMT moduli of the block copolymers ranged between 17.2 ± 1.8 MPa and 62.3 ± 5.7 MPa, i.e. between the values of the parent P2HEB and PPDL homopolymers (7.6 ± 1.4 MPa and 801 ± 42 MPa, respectively). Differential scanning calorimetry showed that the thermal properties of the homopolymers were retained by each of the copolymer blocks (melting temperature 90 °C, glass transition temperature 36 °C).

Bioinspired All-Polyester Diblock Copolymers Made from Poly(pentadecalactone) and Poly(3-hydroxycinnamate): Synthesis and Polymer Film Properties

A bioinspired diblock copolymer was synthesized from pentadecalactone and 3-hydroxy cinnamic acid. Poly(pentadecalactone) (PPDL) with a molar mass of up to 43,000 g mol-1 was obtained by ring-opening polymerization initiated propargyl alcohol. Poly(3-hydroxy cinnamate) (P3HCA) was obtained by polycondensation and end-functionalized with 3-azido propanol. The two functionalized homopolymers were connected via 1,3-dipolar Huisgen addition to yield the block copolymer PPDL-triazole-P3HCA. The structure the block copolymer was confirmed by proton NMR, FTIR spectroscopy and GPC. By analyzing the morphology of polymer films made from the homopolymers, from a 1:1 homopolymer blend, and from the PPDL-triazole-P3HCA block copolymer, clearly distinct micro- and nanostructures were revealed. Quantitative nanomechanical measurements revealed that the block copolymer PPDL-triazole-P3HCA had a DMT modulus of 22.3 ± 2.7 MPa, which was lower than that of the PPDL homopolymer (801 ± 42 MPa), yet significantly higher than that of the P3HCA homopolymer (1.77 ± 0.63 MPa). Thermal analytics showed that the melting point of PPDL-triazole-P3HCA was similar to PPDL (89-90 °C), while it had a glass transition was similar to P3HCA (123-124 °C). Thus, the semicrystalline, potentially degradable all-polyester block copolymer PPDL-triazole-P3HCA combines the thermal properties of either homopolymer, and has an intermediate elastic modulus.

Synthesis of telechelic polyesters by means of transesterification of an A2 + B2 polycondensation-derived cyclic polyester with a functionalized diester

End-functionalized linear polyesters were synthesized by means of base-catalyzed transesterification of a cyclic polyester, obtained by A₂ + B₂ polycondensation, with a symmetric functional diester as an exchange reagent.

A Vinyl Ether-Functional Polycarbonate as a Template for Multiple Postpolymerization Modifications

A highly-reactive vinyl ether-functionalized aliphatic polycarbonate and its block copolymer were developed as templates for multiple post-polymerization conjugation chemistries. The vinyl ether-functional six-membered cyclic carbonate monomer was synthesized by a well-established two-step procedure starting from 2,2-bis(hydroxymethyl)propionic acid. An organobase-catalyzed ring-opening polymerization of the synthesized monomer afforded polycarbonates with pendant vinyl ether functionalities (PMVEC). The vinyl ether moieties on the resulting polymers were readily conjugated with hydroxyl- or thiol-containing compounds via three different post-polymerization modification chemistries - acetalization, thio-acetalization, and thiol-ene reaction. Acetal-functionalized polycarbonates were studied in depth to exploit their acid-labile acetal functionalities. Acetalization of the amphiphilic diblock copolymer of poly(ethylene glycol) methyl ether (mPEG) and PMVEC, mPEG113-b-PMVEC13, with the model hydroxyl compound 4- methylbenzyl alcohol resulted in a maximum of 42% acetal and 58% hydroxyl side chain groups. Nonetheless, the amphiphilicity of the block polymer allowed for its self-assembly in water to afford nanostructures, as characterized via dynamic light scattering and transmission electron microscopy. The kinetics of acetal cleavage within the block polymer micelles were examined in acidic buffered solutions (pH 4 and 5). In addition, mPEG-b-PMVEC and its hydrolyzed polymer mPEG-b-PMHEC (i.e., after full cleavage of acetals) exhibited minimal cytotoxicity to RAW 264.7 mouse macrophages, indicating that this polymer system represents a biologically non-hazardous material with pH-responsive activity.

Ring opening polymerization of macrolactones: high conversions and activities using an yttrium catalyst

The ring-opening polymerization of macrolactones (C₁₅–C₂₃) is reported using an yttrium catalyst which shows high rates and conversions in the production of long-chain aliphatic polyesters.