Re-entrance of Poly(N,N-diethylacrylamide) in D2O/d-Ethanol Mixture at 27 °C

Effect of cosolvents on the phase separation of polyelectrolyte complexes

Evidence is shown that cosolvent mixtures control the coacervation of mixtures of oppositely charged polyelectrolytes. Binary and ternary solvent mixtures lead to non-monotonic solubility as a function of the average dielectric constants of the solvent mixtures. These data are rationalized by considering both electrostatic-driven phase separation and solvophobic-driven phase separation using group contribution effects on solubility parameters. These estimates are introduced into an effective Flory-Huggins interaction parameter within the framework of Voorn-Overbeek theory with variable dielectric constants and temperature dependences. Despite its simplicity, the model recovers salient experimental observations not only on their coacervate stabilities, but also on their lower critical solution temperature behaviors. These observations highlight the importance of weak van der Waals interactions in determining the phase behaviors of polyelectrolyte complexes relative to electrostatic correlations.

General Condition for Polymer Cononsolvency in Binary Mixed Solvents

Starting from a generic model based on the thermodynamics of mixing and abstracted from the chemistry and microscopic details of solution components, three consistent and complementary computational approaches are deployed to investigate the general condition for polymer cononsolvency in binary mixed solvents at the zeroth order. The study reveals χPS - χPC + χSC as the underlying universal parameter that regulates cononsolvency, where χαβ is the immiscibility parameter between the α- and β-component. Two disparate cononsolvency regimes are identified for χPS - χPC + χSC < 0 and χPS - χPC + χSC > 2, respectively, based on the behavior of the second osmotic virial coefficient at varying solvent mixture composition x C. The predicted condition is verified using self-consistent field calculations by directly examining the polymer conformational transition as a function of x C. It is further shown that in the regime χPS - χPC + χSC < 0, the reentrant polymer conformation transition is driven by maximizing the solvent-cosolvent contact, but in the regime χPS - χPC + χSC > 2, it is driven by promoting polymer and cosolvent contact. In-between the two regimes when neither effect is dominant, a monotonic response of polymer conformation to x C is observed. Effects of the mean-field approximation on the predicted condition are evaluated by comparing the mean-field calculations with computer simulations. It shows that the fluctuation effects lead to a higher threshold value of χPS - χPC + χSC in the second regime, where local enrichment of cosolvent in polymer proximity plays a critical role.

Smart Polymers for Soft Materials: From Solution Processing to Organic Solids

Polymeric materials are ubiquitous in our everyday life, where they find a broad range of uses-spanning across common household items to advanced materials for modern technologies. In the context of the latter, so called "smart polymers" have received a lot of attention. These systems are soluble in water below their lower critical solution temperature Tℓ and often exhibit counterintuitive solvation behavior in mixed solvents. A polymer is known as smart-responsive when a slight change in external stimuli can significantly change its structure, functionm and stability. The interplay of different interactions, especially hydrogen bonds, can also be used for the design of lightweight high-performance organic solids with tunable properties. Here, a general scheme for establishing a structure-property relationship is a challenge using the conventional simulation techniques and also in standard experiments. From the theoretical side, a broad range of all-atom, multiscale, generic, and analytical techniques have been developed linking monomer level interaction details with macroscopic material properties. In this review, we briefly summarize the recent developments in the field of smart polymers, together with complementary experiments. For this purpose, we will specifically discuss the following: (1) the solution processing of responsive polymers and (2) their use in organic solids, with a goal to provide a microscopic understanding that may be used as a guiding tool for future experiments and/or simulations regarding designing advanced functional materials.

Distinctly different solvation behaviors of poly(N,N-diethylacrylamide) gels in water/acetone and water/DMSO mixtures

The solvation behaviors and intermolecular interactions of a poly(N,N-diethylacrylamide) (PDEA) gel network in water/DMSO and water/acetone mixtures have been investigated by variable-temperature high-resolution ¹H MAS NMR. Unlike decreasing volume phase transition temperature (VPTT) of the typical thermosensitive poly(N-isopropylacrylamide) (PNIPAM) gel induced by both acetone and DMSO in a water-rich region, distinct phase transition behaviors are revealed for the PDEA gel. That is, acetone is found to increase the VPTT of PDEA directly in the water-rich region while DMSO is also found to increase the VPTT of PDEA at a very low concentration but then decrease the VPTT as the concentration further increases. The above distinctly different VPTT shifts of PDEA are attributed to the different polymer-cosolvent interactions in water/acetone and water/DMSO systems. DMSO molecules with a strong water affinity are preferentially excluded by the PDEA gel network, and can promote the volume phase transition by favoring the collapse of the PDEA gel network, while acetone molecules preferentially adsorbed on the polymer interact with PDEA via non-specific van der Waals interaction, which favors the swollen state of the PDEA gel.

Poly(sulfobetaine)-Based Diblock Copolymer Thin Films in Water/Acetone Atmosphere: Modulation of Water Hydration and Co-nonsolvency-Triggered Film Contraction

The water swelling and subsequent solvent exchange including co-nonsolvency behavior of thin films of a doubly thermo-responsive diblock copolymer (DBC) are studied via spectral reflectance, time-of-flight neutron reflectometry, and Fourier transform infrared spectroscopy. The DBC consists of a thermo-responsive zwitterionic (poly(4-((3-methacrylamidopropyl) dimethylammonio) butane-1-sulfonate)) (PSBP) block, featuring an upper critical solution temperature transition in aqueous media but being insoluble in acetone, and a nonionic poly(N-isopropylmethacrylamide) (PNIPMAM) block, featuring a lower critical solution temperature transition in water, while being soluble in acetone. Homogeneous DBC films of 50-100 nm thickness are first swollen in saturated water vapor (H₂O or D₂O), before they are subjected to a contraction process by exposure to mixed saturated water/acetone vapor (H₂O or D₂O/acetone-d6 = 9:1 v/v). The affinity of the DBC film toward H₂O is stronger than for D₂O, as inferred from the higher film thickness in the swollen state and the higher absorbed water content, thus revealing a pronounced isotope sensitivity. During the co-solvent-induced switching by mixed water/acetone vapor, a two-step film contraction is observed, which is attributed to the delayed expulsion of water molecules and uptake of acetone molecules. The swelling kinetics are compared for both mixed vapors (H₂O/acetone-d6 and D₂O/acetone-d6) and with those of the related homopolymer films. Moreover, the concomitant variations of the local environment around the hydrophilic groups located in the PSBP and PNIPMAM blocks are followed. The first contraction step turns out to be dominated by the behavior of the PSBP block, whereas the second one is dominated by the PNIPMAM block. The unusual swelling and contraction behavior of the latter block is attributed to its co-nonsolvency behavior. Furthermore, we observe cooperative hydration effects in the DBC films, that is, both polymer blocks influence each other's solvation behavior.

Cononsolvency of thermoresponsive polymers: where we are now and where we are going

Cononsolvency is an intriguing phenomenon where a polymer collapses in a mixture of good solvents. This cosolvent-induced modulation of the polymer solubility has been observed in solutions of several polymers and biomacromolecules, and finds application in areas such as hydrogel actuators, drug delivery, compound detection and catalysis. In the past decade, there has been a renewed interest in understanding the molecular mechanisms which drive cononsolvency with a predominant emphasis on its connection to the preferential adsorption of the cosolvent. Significant efforts have also been made to understand cononsolvency in complex systems such as micelles, block copolymers and thin films. In this review, we will discuss some of the recent developments from the experimental, simulation and theoretical fronts, and provide an outlook on the problems and challenges which are yet to be addressed.

An interplay of excluded-volume and polymer-(co)solvent attractive interactions regulates polymer collapse in mixed solvents

Cosolvent effects on the coil-globule transitions in aqueous polymer solutions are not well understood, especially in the case of amphiphilic cosolvents that preferentially adsorb on the polymer and lead to both polymer swelling and collapse. Although a predominant focus in the literature has been placed on the role of polymer-cosolvent attractive interactions, our recent work has shown that excluded-volume interactions (repulsive interactions) can drive both preferential adsorption of the cosolvent and polymer collapse via a surfactant-like mechanism. Here, we further study the role of polymer-(co)solvent attractive interactions in two kinds of polymer solutions, namely, good solvent (water)-good cosolvent (alcohol) (GSGC) and poor solvent-good cosolvent (PSGC) solutions, both of which exhibit preferential adsorption of the cosolvent and a non-monotonic change in the polymer radius of gyration with the addition of the cosolvent. Interestingly, at low concentrations, the polymer-(co)solvent energetic interactions oppose polymer collapse in the GSGC solutions and contrarily support polymer collapse in the PSGC solutions, indicating the importance of the underlying polymer chemistry. Even though the alcohol molecules are preferentially adsorbed on the polymer, the trends of the energetic interactions at low cosolvent concentrations are dominated by the polymer-water energetic interactions in both the cases. Therefore, polymer-(co)solvent energetic interactions can either reinforce or compensate the surfactant-like mechanism, and it is this interplay that drives coil-to-globule transitions in polymer solutions. These results have implications for rationalizing the cononsolvency transitions in real systems such as polyacrylamides in aqueous alcohol solutions where the understanding of microscopic driving forces is still debatable.

A cosolvent surfactant mechanism affects polymer collapse in miscible good solvents

The coil-globule transition of aqueous polymers is of profound significance in understanding the structure and function of responsive soft matter. In particular, the remarkable effect of amphiphilic cosolvents (e.g., alcohols) that leads to both swelling and collapse of stimuli-responsive polymers has been hotly debated in the literature, often with contradictory mechanisms proposed. Using molecular dynamics simulations, we herein demonstrate that alcohols reduce the free energy cost of creating a repulsive polymer-solvent interface via a surfactant-like mechanism which surprisingly drives polymer collapse at low alcohol concentrations. This hitherto neglected role of interfacial solvation thermodynamics is common to all coil-globule transitions, and rationalizes the experimentally observed effects of higher alcohols and polymer molecular weight on the coil-to-globule transition of thermoresponsive polymers. Polymer-(co)solvent attractive interactions reinforce or compensate this mechanism and it is this interplay which drives polymer swelling or collapse.

On-Off of Co-non-solvency for Poly(N-vinylcaprolactam) in Alcohol-Water Mixtures: A Molecular Dynamics Study

Poly(N-vinylcaprolactam) (PVCL) exhibits co-non-solvency in aqueous solutions of 2-propanol but not in methanol. What distinguishes the impact of these two cosolvents on the polymer conformational stability? We report a molecular dynamics simulation study on PVCL 50-mer and monomers dissolved in methanol-water and 2-propanol-water mixtures. We show that the alcohol-concentration dependence of the effective attraction between a pair of PVCL monomers closely resembles the conformational changes in a single PVCL 50-mer as well as the experimentally observed behavior for PVCL chains. We also found that, at the co-non-solvency maximum, the monomer-monomer attraction works over a long-range beyond the solvent-separated distance. Then, we correlate the long-range attraction to the appearance of a dense alcohol concentration accumulated between the monomers. Furthermore, we distinctly demonstrate that the co-non-solvency of PVCL monomers can be switched on/off by artificially tuning the alcohol size while keeping the energetic parameters. Thus, we conclude that the magnitude of the excluded volume effect in alcohol accompanying the gain in translational entropy of the solvent is crucial to the occurrence of PVCL polymer co-non-solvency.

Why Do Elastin-Like Polypeptides Possibly Have Different Solvation Behaviors in Water-Ethanol and Water-Urea Mixtures?

The solvent quality determines the collapsed or the expanded state of a polymer. For example, a polymer dissolved in a poor solvent collapses, whereas in a good solvent it opens up. While this standard understanding is generally valid, there are examples when a polymer collapses even in a mixture of two good solvents. This phenomenon, commonly known as co-non-solvency, is usually associated with a wide range of synthetic (smart) polymers. Moreover, recent experiments have shown that some biopolymers, such as elastin-like polypeptides (ELPs) that exhibit lower critical solution behavior T l in pure water, show co-non-solvency behavior in aqueous ethanol mixtures. In this study, we investigate the phase behavior of elastin-like polypeptides (ELPs) in aqueous binary mixtures using molecular dynamics simulations of all-atom and complementary explicit solvent generic models. The model is parameterized by mapping the solvation free energy obtained from the all-atom simulations onto the generic interaction parameters. For this purpose, we derive segment-based (monomer level) generic parameters for four different peptides, namely proline (P), valine (V), glycine (G), and alanine (A), where the first three constitute the basic building blocks of ELPs. Here, we compare the conformational behavior of two ELP sequences, namely -(VPGGG)- and -(VPGVG)-, in aqueous ethanol and -urea mixtures. Consistent with recent experiments, we find that ELPs show co-non-solvency in aqueous ethanol mixtures. Ethanol molecules have preferential binding with all ELP residues, with an interaction contrast of 6-8 k B T, and thus driving the coil-to-globule transition. On the contrary, ELP conformations show a weak variation in aqueous urea mixtures. Our simulations suggest that the glycine residues dictate the overall behavior of ELPs in aqueous urea, where urea molecules have a rather weak preferential binding with glycine as observed from the all atom simulations, i.e., less than k B T. This weak interaction dilutes the overall effect of other neighboring residues and thus ELPs exhibit a different conformational behavior in aqueous urea in comparison to aqueous ethanol mixtures. While the validation of the latter findings will require a more detailed experimental investigation, the results presented here may provide a new twist to the present understanding of cosolvent interactions with peptides and proteins.

Dynamics of the Phase Separation in a Thermoresponsive Polymer: Accelerated Phase Separation of Stereocontrolled Poly( N, N-diethylacrylamide) in Water

We studied the dependence on tacticity of the dynamic phase separation behavior of thermoresponsive poly( N, N-diethylacrylamide) (PDEA) in an aqueous solution. Using a laser temperature-jump technique combined with transient photometry, we determined the time constants of the phase separation and found that both atactic and isotactic-rich PDEAs had fast and slow phase separation processes (τ_fast and τ_slow). The fast process (τ_fast) was independent of the tacticity, irrespective of the concentration. On the other hand, the slow process had a strong dependence on the tacticity. We found the slow phase separation process got considerably faster with increasing isotacticity in dilute solutions. This effect due to the tacticity of the PDEA is totally different from that of poly( N-isopropylacrylamide) and can be explained on the basis of the difference between the hydrophobicity of atactic PDEA and that of isotactic-rich PDEA.

Reply to the 'Comment on "Relating side chain organization of PNIPAm with its conformation in aqueous methanol"' by A. Pica and G. Graziano, Soft Matter, 2017, 13, DOI: 10.1039/C7SM01065F

We have recently proposed preferential binding by a cosolvent as the mechanism for chain collapse under co-non-solvency. Here we summarise our earlier works and provide further evidence that alcohol preferentially binds to PNIPAm, forming cosolvent bridges, and thus drives the transition. We also clarify some of the common misconceptions evoked in this debate with Pica and Graziano (PG), reinforcing the arguments of our earlier reply-comment [Soft Matter, 2017, 13, 2292] and published works.

Preferential adsorption of the additive is not a prerequisite for cononsolvency in water-rich mixtures

NMR studies reveal the distinct molecular interactions accounting for cononsolvency.