Ring-Opening Alternating Copolymerization of Epoxides and Dihydrocoumarin Catalyzed by a Phosphazene Superbase

The synthesis of multifunctional cellulose graft alternating copolymers of 3,4-dihydrocoumarin and epoxides in DBU/DMSO/CO2 solvent system

Cellulose graft copolymers having well-defined structures could incorporate the characteristics of both the cellulose skeleton and side chains, providing a new method for the preparation functionalised cellulose derivatives. Herein, a series of multifunctional cellulose grafted, alternating 3,4-dihydrocoumarin (DHC) and epoxide (EPO) copolymers (cell-g-P(DHC-alt-EPO)) were prepared in a metal-free DBU/DMSO/CO2 solvent system without adding additional catalyst. Four examples of cell-g-P(DHC-alt-EPO) with tunable thermal and optical properties were synthesized by copolymerization of DHC with styrene oxide (SO), propylene oxide (PO), cyclohexene oxide (CHO) or furfuryl glycidyl ether (FGE) onto cellulose. The nonconjugated cell-g-P(DHC-alt-EPO) showed UV absorption properties with the maximum absorption peak at 282 nm and 295 nm and photoluminescence performance. A clustering-triggered emission mechanism was confirmed and consistent with DFT theoretical calculations. In DMSO solution, the copolymer (DHCSO5) with DP of 11.64 showed ACQ behaviour as the concentration increased. In addition, DHCSO5 had good antioxidant capacity with an instantaneous radical scavenging activity of 2,2-diphenyl-1-picrylhydrazine (DPPH) up to 65 % at a concentration of 40 mg/ ml and increased to 100 % after 30 min. Thus, the multifunctional cell-g-P(DHC-alt-EPO) materials had a variety of potential applications in the fields of fluorescent printing, bio-imaging, UV- shielding and antioxidants.

Hydrophobic Drug Carrier from Polycaprolactone-b-Poly(Ethylene Glycol) Star-Shaped Polymers Hydrogel Blend as Potential for Wound Healing Application

Blending hydrogel with an amphiphilic polymer can increase the hydrophobic drug loading and entrapment efficiency of hydrogel-based formulations. In this study, a hydrogel formulation with star-shaped polycaprolactone-b-poly(ethylene glycol) (PCL-b-PEG) as the hydrophobic drug cargo is produced. The 4-arm and 6-arm star-shaped PCL are synthesized with different molecular weights (5000, 10,000, 15,000 g/mol) via ROP and MPEG as the hydrophilic segment is attached via the Steglich esterification. FTIR and ¹H-NMR analysis showed the presence of all functional groups for homopolymers and copolymers. M_n for all synthesized polymers is close to the theoretical value while GPC spectra showed a monomodal peak with narrow molecular weight distribution (PDI:1.01-1.25). The thermal degradation temperature and crystalline melting point of synthesized polymers increase with the increase in molecular weight and number of arms. All formulations possess high drug loading and entrapment efficiency (>99%) and increase with increasing molecular weight, number of arms, and amount of polymer in the formulations. All formulations showed a sustained drug release pattern with no initial burst, which follows the Korsmeyer-Peppas kinetic model. The polymer hydrogel formulations showed antibacterial activity against E. coli and S. aureus. The hydrogel containing 4-arm PCL_15k-PEG is chosen as the best formulation due to its high drug release, good antimicrobial activity, and morphology.

Elucidation of the Alternating Copolymerization Mechanism of Epoxides or Aziridines with Cyclic Anhydrides in the Presence of Halide Salts

Organic halide salts in combination with metal or organic compound are the most common and essential catalysts in ring-opening copolymerizations (ROCOP). However, the role of organic halide salts was neglected. Here, we have uncovered the complex behavior of organic halides in ROCOP of epoxides or aziridine with cyclic anhydride. Coordination of the chain-ends to cations, electron-withdrawing effect, leaving ability of halide atoms, chain-end basicity/nucleophilicity, and terminal steric hindrance cause three types of side reactions: single-site transesterification, substitution, and elimination. Understanding the complex functions of organic halide salts in ROCOP led us to develop highly active and selective aminocyclopropenium chlorides as catalysts/initiators. Adjustable H-bonding interactions of aminocyclopropenium with propagating anions and epoxides create chain-end coordination process that generate highly reactive carboxylate and highly selective alkoxide chain-ends.

Recent Advances in Sequence-Controlled Ring-Opening Copolymerizations of Monomer Mixtures

Transforming renewable resources into functional and degradable polymers is driven by the ever-increasing demand to replace unsustainable polyolefins. However, the utility of many degradable homopolymers remains limited due to their inferior properties compared to commodity polyolefins. Therefore, the synthesis of sequence-defined copolymers from one-pot monomer mixtures is not only conceptually appealing in chemistry, but also economically attractive by maximizing materials usage and improving polymers' performances. Among many polymerization strategies, ring-opening (co)polymerization of cyclic monomers enables efficient access to degradable polymers with high control on molecular weights and molecular weight distributions. Herein, we highlight recent advances in achieving one-pot, sequence-controlled polymerizations of cyclic monomer mixtures using a single catalytic system that combines multiple catalytic cycles. The scopes of cyclic monomers, catalysts, and polymerization mechanisms are presented for this type of sequence-controlled ring-opening copolymerization.

Lithium achieves sequence selective ring-opening terpolymerisation (ROTERP) of ternary monomer mixtures

Heteroatom-containing degradable polymers have strong potential as sustainable replacements for petrochemically derived materials. However, to accelerate and broaden their uptake greater structural diversity and new synthetic methodologies are required. Here we report a sequence selective ring-opening terpolymerisation (ROTERP), in which three monomers (A, B, C) are selectively enchained into an (ABA'C) n sequence by a simple lithium catalyst. Degradable poly(ester-alt-ester-alt-trithiocarbonate)s are obtained in a M n range from 2.35 to 111.20 kDa which are not easily accessible via other polymerisation methodologies. The choice of alkali metal is key to achieve high activity and to control the terpolymer sequence. ROTERP is mechanistically compatible with ring-opening polymerisation (ROP) allowing switchable catalysis for blockpolymer synthesis. The ROTERP demonstrated in this study could be the first example of an entirely new family of sequence selective terpolymerisations.

Organocatalytic Copolymerization of Cyclic Lysine Derivative and ε-Caprolactam toward Antibacterial Nylon-6 Polymers

Functional polymers of nylon-6, particularly those with sustained antibacterial functions, have many practical applications. However, the development of functional ε-caprolactam monomers for the subsequent ring-opening copolymerization (ROCOP) formation of these materials remains a challenge. Here we report a t-BuP₄-mediated ROCOP of dimethyl-protected cyclic lysine with ε-caprolactam, followed by quaternization, affording antibacterial nylon-6 polymers bearing quaternary ammonium functionality with high molecular weight (up to 77.4 kDa). The antibacterial nylon-6 polymers exhibited good physical and mechanical properties and strong antimicrobial activities. At 25 mol % quaternary ammonium group incorporation, the nylon-6 polymer demonstrated complete killing of Staphylococcus aureus (Gram-positive) and Escherichia coli (Gram-negative). The results from this study may provide a strategy for the facile preparation of antibacterial nylon-6 polymers to addressing the public health and safety challenges.

Heterocycle/Heteroallene Ring-Opening Copolymerization: Selective Catalysis Delivering Alternating Copolymers

Heteroatom-containing polymers have strong potential as sustainable replacements for petrochemicals, show controllable monomer-polymer equilibria and properties spanning plastics, elastomers, fibres, resins, foams, coatings, adhesives, and self-assembled nanostructures. Their current and future applications span packaging, house-hold goods, clothing, automotive components, electronics, optical materials, sensors, and medical products. An interesting route to these polymers is the catalysed ring-opening copolymerisation (ROCOP) of heterocycles and heteroallenes. It is a living polymerization, occurs with high atom economy, and creates precise, new polymer structures inaccessible by traditional methods. In the last decade there has been a renaissance in research and increasing examples of commercial products made using ROCOP. It is better known in the production of polycarbonates and polyesters, but is also a powerful route to make N-, S-, and other heteroatom-containing polymers, including polyamides, polycarbamates, and polythioesters. This Review presents an overview of the different catalysts, monomer combinations, and polymer classes that can be accessed by heterocycle/heteroallene ROCOP.

Organocatalytic aminocarbonylation of α,β-unsaturated ketones with N,N-dimethyl carbamoylsilane

Schwesinger's superbase can efficiently activate the Si–CONMe₂ bond and initiate the aminocarbonylation of α,β-unsaturated ketones and N,N-dimethyl carbamoylsilane.

Polycondensation of bis(α-diazo-1,3-dicarbonyl) compounds with dicarboxylic acids: an efficient access to functionalized alternating polyesters

We report an efficient and mild approach to functionalized alternating polyesters on the basis of O–H insertion polycondensation of bis(α-diazo-1,3-dicarbonyl) compounds with dicarboxylic acids.

Coumarines as masked phenols for amide functional benzoxazines

Benzoxazines with amide linkages were successfully prepared from 3,4-dihydrocoumarine using either one-pot or stepwise pathways.

Sequence-Selective Terpolymerization from Monomer Mixtures Using a Simple Organocatalyst

One-step synthesis of block copolymer from mixed monomers is of great interest and challenge. Using a simple non-nucleophilic organobase as the catalyst, we have achieved sequence-selective terpolymerization from a mixture of phthalic anhydride (PA), an epoxide, and rac-lactide (LA). Alcohol-initiated alternating copolymerization of PA and epoxide occurs first and exclusively because PA is substantially more active than LA for reacting with base-activated hydroxyl. When PA is fully consumed, LA polymerizes from the termini of the first block while excess epoxide stays intact because of the mild basicity of the catalyst. The two polymerizations thus occur tandemly, both in chemoselective manners, so that an aromatic-aliphatic block copolyester is generated in this one-step synthesis. The effectiveness and versatility of this approach is demonstrated by the use of ethylene oxide and several monosubstituted epoxides as well as mono-, di-, or tetrahydroxy initiators.

Precise synthesis of sulfur-containing polymers via cooperative dual organocatalysts with high activity

Metal-free and controlled synthesis of sulfur-containing polymer is still a big challenge in polymer chemistry. Here, we report a metal-free, living copolymerization of carbonyl sulfide (COS) with epoxides via the cooperative catalysis of organic Lewis pairs including bases (e.g.: phosphazene, amidine, and guanidine) and thioureas as hydrogen-bond donors, afford well-defined poly(monothiocarbonate)s with 100% alternating degree, >99% tail-to-head content, controlled molecular weights (up to 98.4 kg/mol), and narrow molecular weight distributions (1.13-1.23). The effect of the types of Lewis pairs on the copolymerization of COS with several epoxides is investigated. The turnover frequencies (TOFs) of these Lewis pairs are as high as 112 h-1 at 25 °C. Kinetic and mechanistic results suggest that the supramolecular specific recognition of thiourea to epoxide and base to COS promote the copolymerization cooperatively. This strategy provides commercially available Lewis pairs for metal-free synthesis of sulfur-containing polymers with precise structure.

Controlled preparation of amphiphilic triblock-copolyether in a metal- and solvent-free approach for tailored structure-directing agents

Organocatalysis is employed as a precise tool for the preparation of triblock-copolyethers for a systematic access to structure-direction.

Organocatalyzed Anionic Ring-Opening Polymerizations of N-Sulfonyl Aziridines with Organic Superbases

The anionic ring-opening polymerizations (AROPs) of N-sulfonyl aziridines, in the presence of organic superbases including phosphazene (t-Bu-P₄), Verkade's base (P(i-PrNCH₂CH₂)₃N, TiPP), DBU, MTBD, and N,N,N',N'-tetramethylguanidine (TMG), using N-benzyl-p-toluenesulfonamide (BnN(H)Ts) as initiator were explored to produce metal-free poly(sulfonylaziridine)s. Among the superbases used, the catalytic activity was found directly proportional to their basicity. Remarkably, t-Bu-P₄ and TiPP gave a living/controlled AROP of 2-methyl-N-tosylaziridine (TsMAz), where t-Bu-P₄ performed better, affording the metal-free and well-defined poly(sulfonylaziridine)s with high molar masses (M_n(SEC) > 30 kg mol^-1) and low dispersities (Đ < 1.10) in 3.5 h. For the less reactive monomers of 2-methyl-N-ethylsulfonyl aziridine (EsMAz) and 2-phenyl-N-tosylaziridine (TsPhAz), t-Bu-P₄ showed the same excellent catalytic efficiency (30 equiv, conv. > 95%, 5 h). The organocatalyzed AROP allowed the use of lower catalyst (t-Bu-P₄) loading than the amount of initiator (BnN(H)Ts), but the propagating polymer chains were as many as the number of equivalents of the introduced initiators, which could lower the loading of catalyst used to amounts as low as 0.05 mol %.

Self-Buffering Organocatalysis Tailoring Alternating Polyester

A major success has been made on organocatalytic ring-opening alternating copolymerization (ROAP) of phthalic anhydride and ethylene oxide (EO) by use of a simple phosphazene base (t-BuP₁). Polyesters with perfectly alternating sequence distribution, controlled molar masses, and low dispersities (Đ_M < 1.1) are obtained. The ROAP exhibited a distinct living nature so that block, nonlinear, end-functional structures and postpolymerization modification of the alternating polyesters are readily achieved. Solvent, excess EO, and catalyst can be effortlessly recovered and reused. The ideally suitable basicity of t-BuP₁ is considered crucial for the high selectivity and neatness of the ROAP, which engenders a self-buffering mechanism rendering the carboxy and hydroxy terminals appropriately active to allow chain growth in an strictly alternating manner and complete avoidance of side reactions (epoxide self-propagation, transesterification) even at full conversion of the anhydride.

Synthesis of linear and star poly(ε-caprolactone) with controlled and high molecular weights via cyclic trimeric phosphazene base catalyzed ring-opening polymerization

Linear and star PCLs with controlled and high molecular weights are efficiently prepared by a catalytic system of CTPB/alcohol.