Solvated Structure of Cellulose in a Phosphonate-Based Ionic Liquid

Scaling Laws in Polysaccharide Rheology: Comparative Analysis of Water and Ionic Liquid Systems

This study investigates the rheological behavior of two plant-based polysaccharides, with different degrees of hydrophilicity, agar (highly hydrophilic) and guar gum (hydrophilic), in water and 1-ethyl-3-methylimidazolium acetate (EMImAc). The rheological response of these polymers is highly dependent on the solvent's ability to disrupt intermolecular associations. In water, agar forms hydrogels, while guar gum behaves as a viscoelastic liquid with slow modes. The plateau modulus (GN0) scales with polymer concentration (c) as GN0 ∼ c3, consistent with other natural polymers. In EMImAc, both polysaccharides form viscoelastic liquids, exhibiting GN0 ∼ c2.3, as expected for semiflexible polymer solutions. However, the terminal relaxation time, τD, and the specific viscosity, ηsp, scale as τD ∼ c5.3 and ηsp ∼ c7.6, indicative of intermolecular chain-chain associations. Despite the solvent or polysaccharide, the fractional viscosity overshoot and the shear strain at the maximum stress show a terminal Weissenberg number dependence similar to other synthetic polymers.

Developing multifunctional cellulose derivatives for environmental and biomedical applications: Insights into modification processes and advanced material properties

The growing bioeconomic demand for lightweight, eco-friendly materials with functional versatility and competitive mechanical properties drives the resurgence of cellulose as a sustainable scaffold for various applications. This review comprehensively scrutinizes current progressions in cellulose functional materials (CFMs), concentrating on their structure-property connections. Significant modification methods, including cross-linking, grafting, and oxidation, are discussed together with preparation techniques categorized by cellulose sources. This review article highlights the extensive usage of modified cellulose in various industries, particularly its potential in optical and toughening applications, membrane production, and intelligent bio-based systems. Prominence is located on low-cost procedures for developing biodegradable polymers and the physical-chemical characteristics essential for biomedical applications. Furthermore, the review explores the role of cellulose derivatives in smart packaging films for food quality monitoring and deep probes into cellulose's mechanical, thermal, and structural characteristics. The multifunctional features of cellulose derivatives highlight their worth in evolving environmental and biomedical engineering applications.

A structural study on a specific Li-ion ordered complex in dimethyl carbonate-based dual-cation electrolytes

Dimethyl carbonate (DMC) is a linear carbonate solvent commonly used as an electrolyte for electric double-layer capacitors (EDLCs) and Li-ion batteries. However, there are serious problems with the use of DMC as an electrolyte solvent: (1) low ionic conductivity when using Li salts (e.g. LiBF4) and (2) liquid-liquid phase separation when using spiro-type quaternary ammonium salts (e.g. SBPBF4). Dual-cation electrolytes, i.e., bi-salt (SBPBF4 and LiBF4) in DMC, are promising candidates to avoid the phase separation issue and to enhance the total and Li+ conductivities. Herein, we reported a specific Li-ion structure in DMC-based dual-cation electrolytes by combining high-energy X-ray total scattering (HEXTS) and all-atom molecular dynamics (MD) simulations. Quantitative radial distribution function analysis based on experimental and simulation results revealed that the phase-separated SBPBF4/DMC (i.e., the bottom phase of 1 M SBPBF4/DMC) forms long-range ion ordering based on the structured SBP+-BF4- ion pairs. When adding LiBF4 salt into SBPBF4/DMC (i.e., dual-cation electrolyte), the ordered SBP+-BF4- structure disappeared owing to the formation of Li-ion solvation complexes. We found that in the dual-cation electrolyte Li ions form multiple Li+-Li+ ordered complexes in spite of relatively low Li-salt concentration (1 M), being a promising Li+-conducting medium with reduced Li salt usage and low viscosity.

Atomic Level Interactions and Suprastructural Configuration of Plant Cell Wall Polymers in Dialkylimidazolium Ionic Liquids

Ionic liquids (ILs) have been widely investigated for the pretreatment and deconstruction of lignocellulosic feedstocks. However, the modes of interaction between IL-anions and cations, and plant cell wall polymers, namely, cellulose, hemicellulose, and lignin, as well as the resulting ultrastructural changes are still unclear. In this study, we investigated the atomic level and suprastructural interactions of microcrystalline cellulose, birchwood xylan, and organosolv lignin with 1,3-dialkylimidazolium ILs having varying sizes of carboxylate anions. Analysis by ¹³C NMR spectroscopy indicated that cellulose and lignin exhibited stronger hydrogen bonding with acetate ions than with formate ions, as evidenced by greater chemical shift changes. Small-angle X-ray scattering analysis showed that while both cellulose and xylan adopted a single-stranded conformation in acetate-ILs, twice as many acetate ions were bound to one anhydroglucose unit than to an anhydroxylose unit. We also determined that a minimum of seven representative carbohydrate units must interact with an anion for that IL to effectively dissolve cellulose or xylan. Lignin is associated as groups of four polymer molecules in formate-ILs and dispersed as single molecules in acetate-ILs, which indicates that it is highly soluble in the latter. In summary, our study demonstrated that 1,3-dialkylimidazolium acetates displayed stronger binding interactions with cellulose and lignin, as compared to formates, and thus have superior potential to fractionate these polymers from lignocellulosic feedstocks.

Recoverable cellulose composite adsorbents for anionic/cationic dyes removal

GO/HEC/PGDE/Fe₃O₄ materials were successfully fabricated using environmentally-friendly hydroxyethyl cellulose (HEC), poly(ethylene glycol) diglycidyl ether (PGDE), graphene oxide (GO) and magnetic Fe₃O₄. Systematic investigations were completed to explore the influences of GO content in GO/HEC/PGDE/Fe₃O₄ and adsorption conditions on the adsorptions of cationic dyes (methylene blue (MB), crystal violet (CV)) and anionic dye acid blue 25 (AB-25). The increase of GO content can remarkably improve the adsorption capacity of GO/HEC/PGDE/Fe₃O₄ for the dyes. The three kinetic, four isothermic and three thermodynamic models were investigated to reveal the adsorption behaviors of the dyes. The formation of HEC/PGDE/Fe₃O₄ and adsorption mechanisms of the dyes by GO/HEC/PGDE/Fe₃O₄ were suggested. The GO/HEC/PGDE/Fe₃O₄ endowed with easy-fabrication, eco-friendly feature, efficient adsorption capacity of anionic/cationic dyes, convenient separation and reusability has potential applications in wastewater purification industry.

Charge-Selective Aggregation Behavior of Thermoresponsive Polyelectrolytes Having Low Charge Density in Aqueous Solutions of Organic Counterions

The aggregation behavior of thermoresponsive polyelectrolytes with low charge density in aqueous solutions of organic counterions was investigated. We synthesized two thermoresponsive polyelectrolytes: anionic poly(N-isopropylacrylamide-co-(3-sulfopropyl)acrylamide potassium) (P-NIP-SPAK) and cationic poly(N-isopropylacrylamide-co-(3-acrylamidepropyl)trimethylammonium chloride) (P-NIP-AAPTAC). The polyelectrolytes remained soluble in their aqueous solutions even above the lower critical soluble temperature of P-NIP owing to the strong hydration property of the ionic groups. The aggregation occurred when organic counterions were added to the solution. In these solution systems, the concentration of counterions exceeds those of ionic groups introduced into the polyelectrolytes. The aggregation behavior is attributed to the salting-out effect of counterions accommodated near the polyelectrolyte surface by electrostatic interaction. This aggregation behavior was utilized for the charge-selective recognition of amino acids. P-NIP-SPAK aggregated only when basic amino acids were added under acidic conditions, whereas P-NIP-AAPTAC aggregated only when acidic amino acids were added under basic conditions. The results herein demonstrate that P-NIP-SPAK and P-NIP-AAPTAC have the potential to be used as charge-selective polymer sensors for amino acids without having to strictly control the experimental conditions.

A Review on the Modification of Cellulose and Its Applications

The latest advancements in cellulose and its derivatives are the subject of this study. We summarize the characteristics, modifications, applications, and properties of cellulose. Here, we discuss new breakthroughs in modified cellulose that allow for enhanced control. In addition to standard approaches, improvements in different techniques employed for cellulose and its derivatives are the subject of this review. The various strategies for synthetic polymers are also discussed. The recent advancements in polymer production allow for more precise control, and make it possible to make functional celluloses with better physical qualities. For sustainability and environmental preservation, the development of cellulose green processing is the most abundant renewable substance in nature. The discovery of cellulose disintegration opens up new possibilities for sustainable techniques. Based on the review of recent scientific literature, we believe that additional chemical units of cellulose solubility should be used. This evaluation will evaluate the sustainability of biomass and processing the greenness for the long term. It appears not only crucial to dissolution, but also to the greenness of any process.

Macro- and Microstructural Evolution during Drying of Regenerated Cellulose Beads

The macro- and microstructural evolution of water swollen and ethanol swollen regenerated cellulose gel beads have been determined during drying by optical microscopy combined with analytical balance measurements, small-angle X-ray scattering (SAXS), and wide-angle X-ray scattering (WAXS). Two characteristic length scales, which are related to the molecular dimension of cellulose monomer and elongated aggregates of these monomers, could be identified for both types of beads by SAXS. For ethanol swollen beads, only small changes to the structures were detected in both the SAXS and WAXS measurements during the entire drying process. However, the drying of cellulose from water follows a more complex process when compared to drying from ethanol. As water swollen beads dried, they went through a structural transition where elongated structures changed to spherical structures and their dimensions increased from 3.6 to 13.5 nm. After complete drying from water, the nanostructures were characterized as a combination of rodlike structures with an approximate size of cellulose monomers (0.5 nm), and spherical aggregates (13.5 nm) without any indication of heterogeneous meso- or microporosity. In addition, WAXS shows that cellulose II hydrate structure appears and transforms to cellulose II during water evaporation, however it is not possible to determine the degree of crystallinity of the beads from the present measurements. This work sheds lights on the structural changes that occur within regenerated cellulose materials during drying and can aid in the design and application of cellulosic materials as fibers, adhesives, and membranes.

Physicochemical and Structural Properties of a Hydrophobicity/Hydrophilicity Switchable Ionic Liquid

Herein, we report the physicochemical and structural properties of a new solubility-switchable ionic liquid (IL) comprising the glycerammonium (GA) cation with a hydrophilic group, the GA cation attached to an acetal-based protective group [protected GA (PGA)], and bis(trifluoromethanesulfonyl)amide (TFSA). The interionic volumes (V_inter) of the hydrophobic [PGA][TFSA] and hydrophilic [GA][TFSA] ILs were evaluated based on solution density, revealing weaker ion-ion interactions in these relative to conventional ILs. The [PGA][TFSA] and [GA][TFSA] also exhibit poor ion-conducting properties, with up to an order of magnitude lower ionic conductivity (σ) and self-diffusion coefficient (D), as compared with conventional ILs. Radial distribution functions derived from high-energy X-ray total scattering experiments [G^exp(r)] and molecular dynamics (MD) simulations [G^MD(r)] indicate that nearest-neighbor ion-ion interactions in the [PGA][TFSA] and [GA][TFSA] are comparable to those in imidazolium-based IL. Conversely, these are appreciably weakened at the second- and third-neighbors and thus less structured in the long range (r > 12 Å) and very different from the highly ordered imidazolium IL. The atom-atom pair correlation function derived from the MD simulations disclose that at a local scale, specific interactions are absent, with only an electrostatic interaction in the [PGA][TFSA], whereas the GA cations interact with TFSA anions via hydrogen bonding of diol groups in the GA and O atoms in the TFSA. No hydrogen bonding group within the PGA cation leads to weak ion-hydration resulting in a phase separation of [PGA][TFSA] and water; in contrast, the GA cations are easily hydrogen-bonded with water molecules to be miscible in aqueous solutions.

Flame Retardant-Functionalized Cotton Cellulose Using Phosphonate-Based Ionic Liquids

Cellulose from cotton fibers was functionalized through a dissolution-regeneration process with phosphonate-based ionic liquids (ILs): 1,3-dimethylimidazolium methylphosphonate [DIMIM][(MeO)(H)PO₂] and 1-ethyl-3-methylimidazolium methylphoshonate [EMIM][(MeO)(H)PO₂]. The chemical modification of cellulose occurred through a transesterification reaction between the methyl phosphonate function of ILs and the primary alcohol functions of cellulose. The resulting cellulose structure and the amount of grafted phosphorus were then investigated by X-ray diffraction, ICP-AES, and ¹³C and ³¹P NMR spectroscopy. Depending on the IL type and initial cotton / IL ratio in the solution, regenerated cellulose contained up to 4.5% of phosphorus. The rheological behavior of cotton cellulose/ILs solutions and the microscale fire performances of modified cellulose were studied in order to ultimately prepare flame retardant cellulosic materials. Significant improvement in the flame retardancy of regenerated cellulose was obtained with a reduction of THR values down to about 5-6 kJ/g and an increase of char up to about 35 wt%.

Fluorinated alkyl-phosphate-based electrolytes with controlled lithium-ion coordination structure

Herein, we propose Li-ion solvation-controlled electrolytes based on non-flammable organic solvent TFEP and an LiFSA salt [TFEP: tris(2,2,2-trifluoroethyl)phosphate, LiFSA: lithium bis(fluorosulfonyl)amide] to allow Li-ion insertion into a graphite electrode for Li-ion batteries. Comprehensive structural study based on (1) infrared (IR)/Raman spectroscopy, (2) high-energy X-ray total scattering (HEXTS), and (3) molecular dynamics (MD) simulation revealed the solvation (or coordination) structures of Li ions in TFEP-based electrolytes at the molecular level. In binary LiFSA/TFEP with a Li salt concentration (c_Li) < 1.0 mol dm^-3, Li ions are coordinated with both TFEP and FSA components; in detail, two TFEP molecules coordinate in an O-donating monodentate manner and one FSA in an O-donating bidentate manner to form [Li(TFEP)₂(bi-FSA)] as the major species. We demonstrated that adding acetonitrile (AN) to the LiFSA/TFEP electrolytes caused structural changes in the Li-ion complexes. The bi-FSA bound to the Li ion changed its coordination mode to mono-FSA, which was induced by solvating AN molecules to Li ions. The redox reaction corresponding to insertion/deinsertion of Li ions into/from the graphite electrode successfully occurred in 1.0 mol dm^-3 LiFSA/TFEP with an AN electrolyte system, while there was no or reduced Li-ion insertion in the electrolyte without AN. We discussed the relationship between the structure and electrode reaction of the Li-ion complexes based on the FSA-coordination characteristics; i.e., in LiFSA/TFEP with the AN system, the mono-FSA bound to the Li ion is easier to decoordinate due to weaker Li⁺mono-FSA^- interactions rather than the Li⁺bi-FSA^- interactions, which mainly contribute to charge-transfer at the electrode/electrolyte interface to allow Li-ion insertion/deinsertion in the graphite anode.