Effect of Chain Rigidity on the Decoupling of Ion Motion from Segmental Relaxation in Polymerized Ionic Liquids: Ambient and Elevated Pressure Studies

Polymerized and Colloidal Ionic Liquids─Syntheses and Applications

The breadth and importance of polymerized ionic liquids (PILs) are steadily expanding, and this review updates advances and trends in syntheses, properties, and applications over the past five to six years. We begin with an historical overview of the genesis and growth of the PIL field as a subset of materials science. The genesis of ionic liquids (ILs) over nano to meso length-scales exhibiting 0D, 1D, 2D, and 3D topologies defines colloidal ionic liquids, CILs, which compose a subclass of PILs and provide a synthetic bridge between IL monomers (ILMs) and micro to macro-scale PIL materials. The second focus of this review addresses design and syntheses of ILMs and their polymerization reactions to yield PILs and PIL-based materials. A burgeoning diversity of ILMs reflects increasing use of nonimidazolium nuclei and an expanding use of step-growth chemistries in synthesizing PIL materials. Radical chain polymerization remains a primary method of making PILs and reflects an increasing use of controlled polymerization methods. Step-growth chemistries used in creating some CILs utilize extensive cross-linking. This cross-linking is enabled by incorporating reactive functionalities in CILs and PILs, and some of these CILs and PILs may be viewed as exotic cross-linking agents. The third part of this update focuses upon some advances in key properties, including molecular weight, thermal properties, rheology, ion transport, self-healing, and stimuli-responsiveness. Glass transitions, critical solution temperatures, and liquidity are key thermal properties that tie to PIL rheology and viscoelasticity. These properties in turn modulate mechanical properties and ion transport, which are foundational in increasing applications of PILs. Cross-linking in gelation and ionogels and reversible step-growth chemistries are essential for self-healing PILs. Stimuli-responsiveness distinguishes PILs from many other classes of polymers, and it emphasizes the importance of segmentally controlling and tuning solvation in CILs and PILs. The fourth part of this review addresses development of applications, and the diverse scope of such applications supports the increasing importance of PILs in materials science. Adhesion applications are supported by ionogel properties, especially cross-linking and solvation tunable interactions with adjacent phases. Antimicrobial and antifouling applications are consequences of the cationic nature of PILs. Similarly, emulsion and dispersion applications rely on tunable solvation of functional groups and on how such groups interact with continuous phases and substrates. Catalysis is another significant application, and this is an historical tie between ILs and PILs. This component also provides a connection to diverse and porous carbon phases templated by PILs that are catalysts or serve as supports for catalysts. Devices, including sensors and actuators, also rely on solvation tuning and stimuli-responsiveness that include photo and electrochemical stimuli. We conclude our view of applications with 3D printing. The largest components of these applications are energy related and include developments for supercapacitors, batteries, fuel cells, and solar cells. We conclude with our vision of how PIL development will evolve over the next decade.

Dilute polyelectrolyte solutions: recent progress and open questions

Polyelectrolytes are a class of polymers possessing ionic groups on their repeating units. Since counterions can dissociate from the polymer backbone, polyelectrolyte chains are strongly influenced by electrostatic interactions. As a result, the physical properties of polyelectrolyte solutions are significantly different from those of electrically neutral polymers. The aim of this article is to highlight key results and some outstanding questions in the polyelectrolyte research from recent literature. We focus on the influence of electrostatics on conformational and hydrodynamic properties of polyelectrolyte chains. A compilation of experimental results from the literature reveals significant disparities with theoretical predictions. We also discuss a new class of polyelectrolytes called poly(ionic liquid)s that exhibit unique physical properties in comparison to ordinary polyelectrolytes. We conclude this review by listing some key research challenges in order to fully understand the conformation and dynamics of polyelectrolytes in solutions.

Microporous Block Copolymers Modified with Cu(II)-Coordinated Polyethylene Oxide-Substituted Silicas for Analytical Sensors

The influence of stable-to-self-condensation Cu(II)-coordinated polyoxyethylene-substituted silicas (ASiP-Cu-0.5) on the synthesis of microporous block copolymers (OBCs) whose structural feature is the existence of coplanar polyisocyanate blocks of acetal nature (O-polyisocyanates) and a flexible-chain component of amphiphilic nature was studied. The use of ASiP-Cu-0.5 increased the yield of O-polyisocyanate blocks and the microphase separation of OBC. The resulting OBCs turned out to be effective sorbents for the analytical reagents PAN and PHENAZO, which, being in the micropore cavity, interacted with copper(II) and magnesium ions. To reduce the thickness of the selective OBC layer ten-fold and simplify the technology for obtaining analytical test systems, polyethylene terephthalate was used as a substrate for applying OBC. It was found that the increased sensitivity of the resulting test systems was due to the fact that in thin reaction layers, the efficiency of the formation of O-polyisocyanate blocks noticeably increased.

Perspective: Morphology and ion transport in ion-containing polymers from multiscale modeling and simulations

Ion-containing polymers are soft materials composed of polymeric chains and mobile ions. Over the past several decades they have been the focus of considerable research and development for their use as the electrolyte in energy conversion and storage devices. Recent and significant results obtained from multiscale simulations and modeling for proton exchange membranes (PEMs), anion exchange membranes (AEMs), and polymerized ionic liquids (polyILs) are reviewed. The interplay of morphology and ion transport is emphasized. We discuss the influences of polymer architecture, tethered ionic groups, rigidity of the backbone, solvents, and additives on both morphology and ion transport in terms of specific interactions. Novel design strategies are highlighted including precisely controlling molecular conformations to design highly ordered morphologies; tuning the solvation structure of hydronium or hydroxide ions in hydrated ion exchange membranes; turning negative ion-ion correlations to positive correlations to improve ionic conductivity in polyILs; and balancing the strength of noncovalent interactions. The design of single-ion conductors, well-defined supramolecular architectures with enhanced one-dimensional ion transport, and the understanding of the hierarchy of the specific interactions continue as challenges but promising goals for future research.

Ion-cluster-mediated ultrafast self-healable ionoconductors for reconfigurable electronics

Implementing self-healing capabilities in a deformable platform is one of the critical challenges for achieving future wearable electronics with high durability and reliability. Conventional systems are mostly based on polymeric materials, so their self-healing usually proceeds at elevated temperatures to promote chain flexibility and reduce healing time. Here, we propose an ion-cluster-driven self-healable ionoconductor composed of rationally designed copolymers and ionic liquids. After complete cleavage, the ionoconductor can be repaired with high efficiency (∼90.3%) within 1 min even at 25 °C, which is mainly attributed to the dynamic formation of ion clusters between the charged moieties in copolymers and ionic liquids. By taking advantages of the superior self-healing performance, stretchability (∼1130%), non-volatility (over 6 months), and ability to be easily shaped as desired through cutting and re-assembly protocol, reconfigurable, deformable light-emitting electroluminescent displays are successfully demonstrated as promising electronic platforms for future applications.

Implementing high-performance self-healing capability is one urgent challenge for deformable electronics. Here, the authors report ultra-fast ion cluster-mediated ionoconductors and their successful applications in future reconfigurable electronics.

Charge Transport and Glassy Dynamics in Blends Based on 1-Butyl-3-vinylbenzylimidazolium Bis(trifluoromethanesulfonyl)imide Ionic Liquid and the Corresponding Polymer

Charge transport, diffusion properties, and glassy dynamics of blends of imidazolium-based ionic liquid (IL) and the corresponding polymer (polyIL) were examined by Pulsed-Field-Gradient Nuclear Magnetic Resonance (PFG-NMR) and rheology coupled with broadband dielectric spectroscopy (rheo-BDS). We found that the mechanical storage modulus (G′) increases with an increasing amount of polyIL and G′ is a factor of 10,000 higher for the polyIL compared to the monomer (GIL′= 7.5 Pa at 100 rad s⁻¹ and 298 K). Furthermore, the ionic conductivity (σ0) of the IL is a factor 1000 higher than its value for the polymerized monomer with 3.4×10−4 S cm⁻¹ at 298 K. Additionally, we found the Haven Ratio (HR) obtained through PFG-NMR and BDS measurements to be constant around a value of 1.4 for the IL and blends with 30 wt% and 70 wt% polyIL. These results show that blending of the components does not have a strong impact on the charge transport compared to the charge transport in the pure IL at room temperature, but blending results in substantial modifications of the mechanical properties. Furthermore, it is highlighted that the increase in σ0 might be attributed to the addition of a more mobile phase, which also possibly reduces ion-ion correlations in the polyIL.

Ion dynamics in pendant and backbone polymerized ionic liquids: A view from high-pressure dielectric experiments and free-volume model

Polymerized ionic liquids (PILs) are typically single-ion conductors, where one kind of ionic species is either placed as the pendant group to the chain (pendant PILs) or directly incorporated into the polymeric backbone (backbone PILs). This paper compares the thermodynamics, ionic dynamics, and mechanical properties of pendant and backbone PILs. The results indicate that near the glass transition, the energy barrier for ion hopping is much lower for pendant PIL while the backbone PIL shows a much stronger sensitivity to pressure. At the same time, a free-volume based model was proposed here to understand the ion dynamics of both studied PILs at high-pressure conditions. The determined critical volume, quantifying the minimal volume required for ion hopping, of the pendant PIL is significantly reduced compared to the backbone PIL, which is most likely the reason for the enhanced ionic conductivity of the pendant PIL near the glass transition. We found that the proposed model is equivalent to the commonly used pressure counterpart of the Vogel-Fulcher-Tammann equation.

Exploration of Ion Transport in Blends of an Ionic Liquid and a Polymerized Ionic Liquid Graft Copolymer

In this study, we prepared a composite membrane consisting of a poly(1-butyl-3-vinylimidazolium-tetrafluoroborate) (poly([BVIM]-[BF₄])) polymerized ionic liquid graft copolymer (PILGC) and a blend of PILGC and 1-butyl-3-methylimidazolium tetrafluoroborate ([BMIM]-[BF₄]) ionic liquid (IL) to explore techniques for improving the conductivity of PILGCs, which is normally three orders of magnitude lower than that of ILs. PILGCs, which are environmentally friendly, have attracted much interest. To gain a better understanding of ion transport in composites, the mechanisms of ion transport in composite components should be explored. We investigated anion transport in ILs and PILGCs and were able to obtain the correct ion transport mechanisms in IL-PILGC blends based on a previous work. We performed molecular dynamics (MD) simulations, which are commonly used to investigate molecular mechanisms. According to the MD simulation results, in most IL-PILGC blends of various compositions, the contributions of cations are greater than those of anions. This is one reason that blends have higher conductivities than their component PILGCs. To the best of our knowledge, we are the first to identify ion transport mechanisms in PILGCs and their blends with ILs by exploring subdiffusive ion motion regimes. The ratio of the number of cages with more than three cationic branch chains in the blend with 50 wt % PILGC, the blend with 80 wt % PILGC, and the PILGC was 0.26:0.39:0.65. Therefore, the ratio of firm cages gets a promotion as the PILGC content increases. Because the ratio of fast ions decreases as the ratio of firm cages increases, the blend with 80 wt % PILGC has lower anion diffusivities than the blend with 50 wt % PILGC. It was inappropriate to probe ion transport in PILGCs (or IL-PILGC blends) solely via analyzing ion association interactions. Analysis of only ion association interactions led to the incorrect conclusion that the time scales of ion transport in PILGCs are given by the continuous ion association time, which is the time when the ion association remains paired rather than the time when an ion is caught inside a cage. Proper methods should be used to obtain more accurate theories.

Free-radical polymerization of 2-hydroxyethyl methacrylate (HEMA) supported by the high electric field

In macromolecular science, tunning basic polymer parameters, like molecular weight (Mn) or molecular weight distribution (dispersity, Đ), is an active research topic. Many prominent synthetic protocols concerning chemical modification of...

Unraveling the Role of Neutral Units for Single-Ion Conducting Polymer Electrolytes

With the cationic transference number close to unity, single-ion conducting polymer electrolytes (SICPEs) are recognized as an advanced electrolyte system with improved energy efficiency for battery application. The relatively low ionic conductivity for most of the SICPEs in comparison with liquid electrolytes remains the major "bottleneck" for their practical applications. Polyethylene oxide (PEO) has been recognized as a benchmark for solid polymer electrolytes due to its high salt solubility and reasonable ionic conductivity. PEO has two advantages: (i) the polar ether groups coordinate well with lithium ions (Li⁺) providing good dissociation from anions, and (ii) the low T_g provides fast segmental dynamics at ambient temperature and assists rapid charge transport. These properties lead to active use of PEO as neutral plasticizing units in SICPEs. Herein, we present a detailed comparison of new SICPEs copolymerized with PEO units vs SICPEs copolymerized with other types of neutral units possessing either flexible or polar structures. The presented analysis revealed that the polarity of side chains has a limited influence on ion dissociation for copolymer-type SICPEs. The Li⁺-ion dissociation seems to be controlled by the charge delocalization on the polymerized anion. With good miscibility between plasticizing neutral units and ionic conductive units, the ambient ionic conductivity of synthesized SICPEs is still mainly controlled by the T_g of the copolymer. This work sheds light on the dominating role of PEO in SICPE systems and provides helpful guidance for designing polymer electrolytes with new functionalities and structures. Furthermore, based on the presented results, we propose that designing polyanions with a highly delocalized charge may be another promising route for achieving sufficient lithium ionic conductivity in solvent-free SICPEs.

Poly(ionic liquid)s Based on Copolymers of Poly(ethylene oxide) and Cationic Glycidyl Triazolyl Polymers with Tribranched Side Chains

Copolymers comprising poly(ethylene oxide) and cationic glycidyl triazolyl polymer with tribranched side chains (PEO-co-GTP·3X) were synthesized from glycidyl azide copolymer (PEO-co-GAP) and the tricationic alkyne. A synthetic route for the tricationic alkyne was also improved. Bis(trifluoromethanesulfonyl)imide (TFSI) and bis(fluorosulfonyl)imide (FSI) were used as counteranions. Copolymers PEO-co-GTP·3TFSI and PEO-co-GTP·3FSI were characterized by NMR, IR, size exclusion chromatography, DSC, TGA, rheological, and impedance measurements. The NMR results suggested that the main chain of the copolymer was more flexible than that of the homopolymer. However, no major changes were detected in the glass transition temperature and ionic conductivity of the homopolymer and copolymer with TFSI counteranions. The counterion exchange from TFSI to FSI resulted in an increase in the storage modulus and complex viscosity because of the ionic association. Despite its unfavorable viscoelastic properties, PEO-co-GTP·3FSI exhibited higher ionic conductivity than PEO-co-GTP·3TFSI (3.9 × 10^-5 S cm^-1 at 25 °C under anhydrous conditions).

Poly(ionic liquid)s with branched side chains: polymer design for breaking the conventional record of ionic conductivity

Poly(ionic liquid)s with branched side chains can break the conventional record of ionic conductivity of single-ion conductors.

Role of Fast Dynamics in Conductivity of Polymerized Ionic Liquids

Polymerized ionic liquids (PolyILs) are promising candidates for a broad range of technologies. However, the relatively low conductivity of PolyILs at room temperature has strongly limited their applications. In this work, we provide new insights into the roles of various microscopic parameters controlling ion transport in these polymers, which are crucial for their rational design and practical applications. Using broadband dielectric spectroscopy and neutron and light scattering techniques, we found a clear connection between the activation energy for conductivity, fast dynamics, and high-frequency shear modulus in PolyILs at their glass transition temperature (T_g). In particular, our analysis reveals a correlation between conductivity and the amplitude of fast picosecond fluctuations at T_g, suggesting the possible involvement of fast dynamics in lowering the energy barrier for ion conductivity. We also demonstrate that both the activation energy for ion transport and the amplitude of the fast fluctuations depend on the high-frequency shear moduli of PolyILs, thus identifying a practically important parameter for tuning conductivity. The parameters recognized in this work and their connection to the ionic conductivity of PolyILs set the stage for a deeper understanding of the mechanism of ion transport in PolyILs in the glassy state.

Modulation of Cation Diffusion by Reversible Supramolecular Assemblies in Ionic Liquid-Based Nanocomposites

Ionic liquid (IL) properties, such as high ionic conductivity under ambient conditions combined with nontoxicity and nonflammability, make them important materials for future technologies. Despite high ion conductivity desired for battery applications, cation transport numbers in ILs are not sufficient enough to attain high power density batteries. Thus, developing novel approaches directed toward improvement of cation transport properties is required for the application of ILs in energy-storing devices. In this effort, we used various experimental techniques to demonstrate that the strategy of mixing ILs with ultrasmall (1.8 nm) nanoparticles (NPs) resulted in melt-processable composites with improved transport numbers for cations at room temperature. This significant enhancement in the transport number was attributed to the specific chemistry of NPs exhibiting a weaker cation and stronger anion coordination at ambient temperature. At high temperature, significantly weakened NP-anion associations promoted a liquid-like behavior of composites, highlighting the melt-processability of these composites. These results show that designing a reversible dynamic noncovalent NP-anion association controlled by the temperature may constitute an effective strategy to control ion diffusion. Our studies provide fundamental insights into mechanisms driving the charge transport and offer practical guidance for the design of melt-processable composites with an improved cation transport number under ambient conditions.

Pressure-assisted solvent- and catalyst-free production of well-defined poly(1-vinyl-2-pyrrolidone) for biomedical applications

In this work, we developed a fast, highly efficient, and environmentally friendly catalytic system for classical free-radical polymerization (FRP) utilizing a high-pressure (HP) approach. The application of HP for thermally-induced, bulk FRP of 1-vinyl-2-pyrrolidone (VP) allowed to eliminate the current limitation of ambient-pressure polymerization of ‘less-activated’ monomer (LAM), characterized by the lack of temporal control yielding polymers of unacceptably large disperisites and poor result reproducibility. By a simple manipulation of thermodynamic conditions (p = 125–500 MPa, T = 323–333 K) and reaction composition (two-component system: monomer and low content of thermoinitiator) well-defined poly(1-vinyl-2-pyrrolidone)s (PVP) in a wide range of molecular weights and low/moderate dispersities (M_n = 16.2–280.5 kg mol⁻¹, Đ = 1.27–1.45) have been produced. We have found that HP can act as an ‘external’ controlling factor that warrants the first-order polymerization kinetics for classical FRP, something that was possible so far only for reversible deactivation radical polymerization (RDRP) systems. Importantly, our synthetic strategy adopted for VP FRP enabled us to obtain polymers of very high M_n in a very short time-frame (0.5 h). It has also been confirmed that VP bulk polymerization yields polymers with significantly lower glass transition temperatures (T_g) and different solubility properties in comparison to macromolecules obtained during the solvent-assisted reaction.

High-pressure classical free-radical polymerization allowed to eliminate the current limitation of the ambient-pressure synthesis of 1-vinyl-2-pyrrolidone and production of well-defined polymers.

Capacitance of thin films containing polymerized ionic liquids

Electrode-polymer interfaces dictate many of the properties of thin films such as capacitance, the electric field experienced by polymers, and charge transport. However, structure and dynamics of charged polymers near electrodes remain poorly understood, especially in the high concentration limit representative of the melts. To develop an understanding of electric field-induced transformations of electrode-polymer interfaces, we have studied electrified interfaces of an imidazolium-based polymerized ionic liquid (PolyIL) using combinations of broadband dielectric spectroscopy, specular neutron reflectivity, and simulations based on the Rayleigh's dissipation function formalism. Overall, we obtained the camel-shaped dependence of the capacitance on applied voltage, which originated from the responses of an adsorbed polymer layer to applied voltages. This work provides additional insights related to the effects of molecular weight in affecting structure and properties of electrode-polymer interfaces, which are essential for designing next-generation energy storage and harvesting devices.

Fast secondary dynamics for enhanced charge transport in polymerized ionic liquids

Segmental dynamics is considered as a major factor governing ionic conductivity of polymerized ionic liquids (PILs), envisioned as potential electrolytes in fuel cells and batteries. Our dielectric studies performed in T-P thermodynamic space on ionene, composed of the positively charged polymer backbone and freely moving anions, indicate that other relaxation modes, completely ignored so far, can affect the charge transport in PILs as well. We found that fast mobility manifested by a secondary β process promotes segmental dynamics and thereby increases ionic conductivity making the studied material a first coupled PIL of superionic properties. The molecular mechanism underlying such a β process has been identified as Johari-Goldstein relaxation giving experimental proof that fast secondary relaxations of intermolecular origin exist also in PILs and thereby reveal a universal character.

Non-solvating, side-chain polymer electrolytes as lithium single-ion conductors: synthesis and ion transport characterization

Non-solvating, side-chain polymer electrolytes with more dissociable pendent anion chemistries exhibit a dielectric relaxation dominated lithium ion transport mechanism.

Activation volume in superpressed glass-formers

In pressurized glass-forming systems, the apparent (changeable) activation volume Va(P) is the key property governing the previtreous behavior of the structural relaxation time (τ) or viscosity (η), following the Super-Barus behavior: [Formula: see text], T = const. It is usually assumed that Va(P) = V#(P), where [Formula: see text] or [Formula: see text]. This report shows that Va(P) ≪ V#(P) for P → Pg, where Pg denotes the glass pressure, and the magnitude V#(P) is coupled to the pressure steepness index (the apparent fragility). V#(P) and Va(P) coincides only for the basic Barus dynamics, where Va(P) = Va = const in the given pressure domain, or for P → 0. The simple and non-biased way of determining Va(P) and the relation for its parameterization are proposed. The derived relation resembles Murnaghan - O'Connel equation, applied in deep Earth studies. It also offers a possibility of estimating the pressure and volume at the absolute stability limit. The application of the methodology is shown for diisobutyl phthalate (DIIP, low-molecular-weight liquid), isooctyloxycyanobiphenyl (8*OCB, liquid crystal) and bisphenol A/epichlorohydrin (EPON 828, epoxy resin), respectively.

Structural and Mechanical Properties of Ionic Di-block Copolymers via a Molecular Dynamics Approach

Polymerized ionic copolymers have recently evolved as a new class of materials to overcome the limited range of mechanical properties of ionic homopolymers. In this paper, we investigate the structural and mechanical properties of charged ionic homopolymers and di-block copolymers, while using coarse-grained molecular dynamics simulation. Tensile and compressive deformation are applied to the homopolymers and copolymers in the glassy state. The effect of charge ratio and loading direction on the stress-strain behavior are studied. It is found that the electrostatic interactions among charged pairs play major roles, as evidenced by increased Young’s modulus and yield strength with charge ratio. Increased charge ratio lead to enhanced stress contribution from both bonding and pairwise (Van der Waals + coulombic) interaction. The increase in the gyration of the radius is observed with increasing charge ratio in homopolymers, yet a reversed tendency is observed in copolymers. Introduced charge pairs leads to an increased randomness in the segmental orientation in copolymers.

Influence of Host Polarity on Correlating Salt Concentration, Molecular Weight, and Molar Conductivity in Polymer Electrolytes

We use coarse-grained molecular dynamics simulations to study the effect of salt concentration and host polymer molecular weight on ion transport in polymer electrolytes. We find that increasing salt concentration or molecular weight similarly slows polymer dynamics across a wide range of host polarities, and that the resulting relaxation times display a correlation to the product of the salt concentration and polymer molecular weight. However, we find that molar conductivity only decreases with polymer dynamics at high polarities but is uncorrelated with the latter at low polarities. We attribute such differences to the variation in ionic aggregation between high and low polarity electrolytes. At low polarity, ionic dissociation significantly increases with molecular weight and salt concentration, offsetting the slowdown in polymer dynamics and yielding the observed insensitivity of molar conductivity. However, at high polarity, ions are mostly dissociated, independent of either molecular weight or salt concentration, thereby strongly coupling molar conductivity to polymer dynamics.

Access to Thermodynamic and Viscoelastic Properties of Poly(ionic liquid)s Using High-Pressure Conductivity Measurements

In this paper, we examine the transport properties of a 1,2,3-triazolium-based poly(ionic liquid) (PIL) at ambient and elevated pressure up to 475 MPa. We show that the isothermal and isobaric conductivity measurements analyzed in the 3D plane give a unique possibility to estimate the thermodynamic (isothermal compressibility and thermal expansion coefficient) properties for PILs having a charge transport fully controlled by viscosity. This result, providing a direct connection between thermodynamic and dynamic properties of PILs, is of significant importance for both material scientists and practical applications.

Effect of Network Architecture and Linker Polarity on Ion Aggregation and Conductivity in Precise Polymerized Ionic Liquids

Four polymerized ionic liquids (PILs) were systematically designed to study the effect of polymer architecture and linker polarity on ion aggregation and transport. Specifically, linear and network PILs with the same ammonium cations (Am) and bis(trifluoromethane)sulfonimide (TFSI) anions were prepared by step-growth polymerization, and polarity was tuned by incorporating two precise linkers, either polar tetra(ethylene oxide) (4EO) linker or nonpolar undecyl (C11) linker. The glass transition temperature (T_g) substantially increased with the nonpolar C11 linker or upon cross-linking to form a network. The low wave-vector (q) ion aggregation peak from wide-angle X-ray scattering (WAXS) was not observable in the linear 4EO PIL, while it was most pronounced in the network C11 PIL. The network C11 PIL exhibited the strongest decoupling, where the ionic conductivity at T_g is greater than 1 order of magnitude higher than the other PILs. This systematic comparison suggests that network structure and nonpolar linkers can promote both ion aggregation and ionic conductivity close to T_g.

Structural correlations tailor conductive properties in polymerized ionic liquids

In this paper, it was demonstrated that the mobile ion (anion) size and pendant group chemistry affect the packing of the polymer chains and influence conductivity in imidazolium based PolyILs.

Segmental and secondary dynamics of nanoparticle-grafted oligomers

The local segmental and secondary dynamics of tetramethylene oxide oligomer grafted to silica nanoparticles (NPs) were investigated as a function of grafting density and molecular weight. Grafting slows the segmental (α) dynamics, but gives rise to faster secondary (β) motions. Interestingly, the magnitude of these effects decreases with the extent of grafting (i.e., surface coverage), as well as with oligomer molecular weight. The disparity in dynamical effects reflects the decoupling of the segmental and more local β dynamics, the former is associated with stronger dynamic correlations that extend over a greater spatial range. This results in greater sensitivity to interactions, including tethering of the chains to the NP surface.

Effect of Polymer Polarity on Ion Transport: A Competition between Ion Aggregation and Polymer Segmental Dynamics

In this work, we use computer simulations to demonstrate that there may be limits to which polymer polarity alone can be used to influence the ionic conductivity of salt-doped polymer electrolytes. Specifically, we use coarse-grained molecular dynamics simulations to probe the effect of the polarity of the polymer electrolyte upon ion mobilities and conductivities of dissolved salts. At low polymer polarities, increasing the polymer dielectric constant reduces ionic aggregation and the resultant correlated ionic motion, and increases the ionic conductivity. At higher polymer polarities, polymer-polymer and polymer-ion interactions slows polymer segmental dynamics, leading to a reduction in the conductivity of the electrolyte. As a consequence, ionic conductivity achieves an optimum at an intermediate polymer polarity.