Structural Elucidation of Amorphous Photocatalytic Polymers from Dynamic Nuclear Polarization Enhanced Solid State NMR

Unravelling the Molecular Structure and Confining Environment of an Organometallic Catalyst Heterogenized within Amorphous Porous Polymers

The catalytic activity of multifunctional, microporous materials is directly linked to the spatial arrangement of their structural building blocks. Despite great achievements in the design and incorporation of isolated catalytically active metal complexes within such materials, a detailed understanding of their atomic-level structure and the local environment of the active species remains a fundamental challenge, especially when these latter are hosted in non-crystalline organic polymers. Here, we show that by combining computational chemistry with pair distribution function analysis, 129 Xe NMR, and Dynamic Nuclear Polarization enhanced NMR spectroscopy, a very accurate description of the molecular structure and confining surroundings of a catalytically active Rh-based organometallic complex incorporated inside the cavity of amorphous bipyridine-based porous polymers is obtained. Small, but significant, differences in the structural properties of the polymers are highlighted depending on their backbone motifs.

Torsion Angle Analysis of a Thermally Activated Delayed Fluorescence Emitter in an Amorphous State Using Dynamic Nuclear Polarization Enhanced Solid-State NMR

The torsion angle between donor and acceptor segments of a thermally activated delayed fluorescence (TADF) molecule is one of the most critical factors in determining the performance of TADF-based organic light-emitting diodes (OLEDs) because the torsion angle affects not only the energy gap between the singlet and triplet but also the oscillator strength and spin-orbit coupling. However, the torsion angle is difficult to analyze, because organic molecules are in an amorphous state in OLEDs. Here, we determined the torsion angle of a highly efficient TADF emitter, DACT-II, in an amorphous state by dynamic nuclear polarization enhanced solid-state NMR measurements. From the experimentally obtained chemical shift principal values of ¹⁵N on carbazole, we determined the average torsion angle to be 52°. Such quantification of the torsion angles in TADF molecules in amorphous solids will provide deep insight into the TADF mechanism in amorphous OLEDs.

Optimizing chemistry at the surface of prodrug-loaded cellulose nanofibrils with MAS-DNP

Studying the surface chemistry of functionalized cellulose nanofibrils at atomic scale is an ongoing challenge, mainly because FT-IR, NMR, XPS and RAMAN spectroscopy are limited in sensitivity or resolution. Herein, we show that dynamic nuclear polarization (DNP) enhanced ¹³C and ¹⁵N solid-state NMR is a uniquely suited technique to optimize the drug loading on nanocellulose using aqueous heterogenous chemistry. We compare the efficiency of two conventional coupling agents (DMTMM vs EDC/NHS) to bind a complex prodrug of ciprofloxacin designed for controlled drug release. Besides quantifying the drug grafting, we also evidence the challenge to control the concurrent prodrug adsorption and to optimize washing procedures. We notably highlight the presence of an unexpected prodrug cleavage mechanism triggered by carboxylates at the surface of the cellulose nanofibrils.

Impact of Interfaces, and Nanostructure on the Performance of Conjugated Polymer Photocatalysts for Hydrogen Production from Water

The direct conversion of sunlight into hydrogen through water splitting, and by converting carbon dioxide into useful chemical building blocks and fuels, has been an active area of research since early reports in the 1970s. Most of the semiconductors that drive these photocatalytic processes have been inorganic semiconductors, but since the first report of carbon nitride organic semiconductors have also been considered. Conjugated materials have been relatively extensively studied as photocatalysts for solar fuels generation over the last 5 years due to the synthetic control over composition and properties. The understanding of materials' properties, its impact on performance and underlying factors is still in its infancy. Here, we focus on the impact of interfaces, and nanostructure on fundamental processes which significantly contribute to performance in these organic photocatalysts. In particular, we focus on presenting explicit examples in understanding the interface of polymer photocatalysts with water and how it affects performance. Wetting has been shown to be a clear factor and we present strategies for increased wettability in conjugated polymer photocatalysts through modifications of the material. Furthermore, the limited exciton diffusion length in organic polymers has also been identified to affect the performance of these materials. Addressing this, we also discuss how increased internal and external surface areas increase the activity of organic polymer photocatalysts for hydrogen production from water.

Supercritical CO2 impregnation process applied to polymer samples preparation for dynamic nuclear polarization solid-state NMR

In this study, supercritical CO₂ (scCO₂ ) was used to impregnate polymers with paramagnetic polarizing agents to prepare samples for dynamic nuclear polarization (DNP) solid-state NMR (ssNMR) experiments. As a proof of concept, we impregnated polystyrene samples with bTbK, which stands for bis-TEMPO-bisketal where TEMPO is 2,2,6,6-tetra-methylpiperindin-1-oxyl. Substantial DNP signal enhancements could be measured on DNP-enhanced ¹ H → ¹³ C cross-polarization (CP) magic-angle spinning (MAS) spectra recorded at 9.4 T and ~100 K, reaching a maximum value of 8 in the most favorable case, which appeared comparable or even higher than what is typically obtained on similar systems for former sample preparation methods. These results highlight the potential of scCO₂ impregnation as an efficient and possibly versatile methodology to prepare polymer samples for DNP ssNMR investigations.

Off-the-Shelf Gd(NO3)3 as an Efficient High-Spin Metal Ion Polarizing Agent for Magic Angle Spinning Dynamic Nuclear Polarization

Magic angle spinning nuclear magnetic resonance spectroscopy experiments are widely employed in the characterization of solid media. The approach is incredibly versatile but deleteriously suffers from low sensitivity, which may be alleviated by adopting dynamic nuclear polarization methods, resulting in large signal enhancements. Paramagnetic metal ions such as Gd³⁺ have recently shown promising results as polarizing agents for ¹H, ¹³C, and ¹⁵N nuclear spins. We demonstrate that the widely available and inexpensive chemical agent Gd(NO₃)₃ achieves significant signal enhancements for the ¹³C and ¹⁵N nuclear sites of [2-¹³C,¹⁵N]glycine at 9.4 T and ∼105 K. Analysis of the signal enhancement profiles at two magnetic fields, in conjunction with electron paramagnetic resonance data, reveals the solid effect to be the dominant signal enhancement mechanism. The signal amplification obtained paves the way for efficient dynamic nuclear polarization without the need for challenging synthesis of Gd³⁺ polarizing agents.

Quantification of photooxidative defects in weathered microplastics using 13C multiCP NMR spectroscopy

Weathering of microplastics made of commodity plastics like polystyrene, polypropylene and polyethylene introduces polar polymer defects as a result of photooxidation and mechanical stress. Thus, hydrophobic microplastic particles gradually become hydrophilic, consisting of polar oligomers with a significant amount of oxygen-bearing functional groups. This turnover continuously changes interactions between microplastics and natural colloidal matter. To be able to develop a better understanding of this complex weathering process, quantification of the corresponding defect proportions is a first and essential step. Using polystyrene, ¹³C enriched at the α position to 23%, we demonstrate that ¹³C cross polarisation (CP) NMR spectroscopy allows for probing the typical alcohol, peroxo, keto and carboxyl defects. Even the discrimination between in- and end-chain ketones, carboxylic acids and esters as well as ketal functions was possible. Combined with multiCP excitation, defect proportions could be determined with excellent accuracy down to 0.1%. For materials with ¹³C in natural abundance, this accounts for a detection limit of roughly 1%. The best trade-off between measurement time and accuracy for the quantification of the defect intensities for multiCP excitation was obtained for CP block lengths shorter than 250 μs and total build-up times longer than 2 ms. Further measurement time reduction is possible by using multiCP excitation to calibrate intensities obtained from series of ¹³C CP MAS NMR spectra. As photooxidation is an important degradation mechanism for microplastics in the environment, we expect these parameters to be transferable for probing defect proportions of weathered microplastics in general.

We demonstrate an efficient strategy to characterise weathering-induced photooxidative defects in microplastics. The central ¹³C cross polarisation NMR spectra offer high resolution and are quantitative when combined with multiple excitation.

Characterization of crystalline and amorphous forms of irbesartan by multi-nuclear solid-state NMR

Irbesartan (IRB) is an antihypertensive drug which exhibits the rare phenomenon of desmotropy; its 1H- and 2H- tetrazole tautomers can be isolated as distinct crystalline forms. The crystalline forms of IRB are poorly soluble, hence the amorphous form is potentially of interest for its faster dissolution rate. The tautomeric form and the nature of hydrogen bonding in amorphous IRB are unknown. In this study, crystalline form A and amorphous form of irbesartan were studied using ¹³C, ¹⁵N and ¹H solid-state NMR. Variable-temperature ¹³C SSMNR studies showed alkyl chain disorder in the crystalline form of IRB, which may explain the conflicting literature crystal structures of form A (the marketed form). ¹⁵N NMR indicates that the amorphous material contains an approximately 2:1 ratio of 1H- and 2H-tetrazole tautomers. Static ¹H SSNMR and relaxation time measurements confirmed different molecular mobilities of the samples and provided molecular-level insight into the nature of the glass transition. SSNMR is shown to be a powerful technique to investigate the solid state of disordered active pharmaceutical ingredients.

Finding the Sweet Spot of Photocatalysis─A Case Study Using Bipyridine-Based CTFs

Covalent triazine frameworks (CTFs) are a class of porous organic polymers that continuously attract growing interest because of their outstanding chemical and physical properties. However, the control of extended porous organic framework structures at the molecular scale for a precise adjustment of their properties has hardly been achieved so far. Here, we present a series of bipyridine-based CTFs synthesized through polycondensation, in which the sequence of specific building blocks is well controlled. The reported synthetic strategy allows us to tailor the physicochemical features of the CTF materials, including the nitrogen content, the apparent specific surface area, and optoelectronic properties. Based on a comprehensive analytical investigation, we demonstrate a direct correlation of the CTF bipyridine content with the material features such as the specific surface area, band gap, charge separation, and surface wettability with water. The entirety of these parameters dictates the catalytic activity as demonstrated for the photocatalytic hydrogen evolution reaction (HER). The material with the optimal balance between optoelectronic properties and highest hydrophilicity enables HER production rates of up to 7.2 mmol/(h·g) under visible light irradiation and in the presence of a platinum cocatalyst.

DNP NMR Spectroscopy Enabled Direct Characterization of Polystyrene-supported Catalyst Species for Synthesis of Glycidyl Esters by Transesterification

Polymer-supported catalysts have been of great interest in organic syntheses, but have suffered from the difficulty in obtaining direct structural information regarding the catalyst species embedded in the polymer due to the limitations of most analytical methods. Here, we show that dynamic nuclear polarization (DNP)-enhanced solid-state NMR is ideally positioned to characterize the ubiquitous cross-linked polystyrene (PS)-supported catalysts, thus enabling molecular-level understanding and rational development. Ammonium-based catalysts, which show excellent catalytic activity and reusability for the transesterification of methyl esters with glycidol, giving glycidyl esters in high yields, were successfully characterized by DNP ¹⁵N NMR spectroscopy at ¹⁵N natural abundance. DNP ¹⁵N NMR shows in particular that the decomposition of quaternary alkylammonium moieties to tertiary amines was completely suppressed during the catalytic reaction. Furthermore, the dilute ring-opened product derived from glycidol and NO₃⁻ was directly characterized by DNP ¹⁵N CPMAS and ¹H–¹⁵N and ¹H–¹³C HETCOR NMR using a ¹⁵N enriched (NO₃) sample, supporting the view that the transesterification mechanism involves an alkoxide anion derived from an epoxide and NO₃⁻. In addition, the detailed analysis of a used catalyst indicated that the adsorption of products on the cationic center is the major deactivation step in this catalysis.

We demonstrated that DNP-enhanced NMR spectroscopy enables the direct and detailed characterization of polymer-supported alkylammonium catalysts.

Quantification of magic angle spinning dynamic nuclear polarization NMR spectra

Dynamic nuclear polarization (DNP) allows to dramatically enhance the sensitivity of magic angle spinning nuclear magnetic resonance (MAS NMR). DNP experiments usually rely on the detection of low-γ nuclei hyperpolarized from ¹H with the use of cross polarization (CP), which assures more efficient signal enhancement. However, CP is usually not quantitative. Here we determine the quantification performance of three different approaches used in MAS NMR, (conventional CP, variable contact time CP, and multiple-contact CP) under DNP conditions, and we show that absolute quantification in MAS DNP NMR is possible, with errors below 10%.

Open and Closed Radicals: Local Geometry around Unpaired Electrons Governs Magic-Angle Spinning Dynamic Nuclear Polarization Performance

The development of magic-angle spinning dynamic nuclear polarization (MAS DNP) has allowed atomic-level characterization of materials for which conventional solid-state NMR is impractical due to the lack of sensitivity. The rapid progress of MAS DNP has been largely enabled through the understanding of rational design concepts for more efficient polarizing agents (PAs). Here, we identify a new design principle which has so far been overlooked. We find that the local geometry around the unpaired electron can change the DNP enhancement by an order of magnitude for two otherwise identical conformers. We present a set of 13 new stable mono- and dinitroxide PAs for MAS DNP NMR where this principle is demonstrated. The radicals are divided into two groups of isomers, named open (O-) and closed (C-), based on the ring conformations in the vicinity of the N-O bond. In all cases, the open conformers exhibit dramatically improved DNP performance as compared to the closed counterparts. In particular, a new urea-based biradical named HydrOPol and a mononitroxide O-MbPyTol yield enhancements of 330 ± 60 and 119 ± 25, respectively, at 9.4 T and 100 K, which are the highest enhancements reported so far in the aqueous solvents used here. We find that while the conformational changes do not significantly affect electron spin-spin distances, they do affect the distribution of the exchange couplings in these biradicals. Electron spin echo envelope modulation (ESEEM) experiments suggest that the improved performance of the open conformers is correlated with higher solvent accessibility.

Kinetics of 1H-13C multiple-contact cross-polarization as a powerful tool to determine the structure and dynamics of complex materials: application to graphene oxide

Hartmann-Hahn cross-polarization (HHCP) is the most widely used solid-state NMR technique to enhance the magnetization of dilute spins from abundant spins. Furthermore, as the kinetics of CP depends on dipolar interactions, it contains valuable information on molecular structure and dynamics. In this work, analytical solutions are derived for the kinetics of HHCP and multiple-contact CP (MC-CP) using both classical and non-classical spin-coupling models including the effects of molecular dynamics and several ¹H, ¹³C relaxation and ¹H-¹³C CP experiments are performed in graphene oxide (GO). HHCP is found to be inefficient in our GO sample due to very fast ¹H T_1ρ relaxation. By contrast, the MC-CP technique which alleviates most of the magnetization loss by ¹H T_1ρ relaxation leads to a much larger polarization transfer efficiency reducing the measuring time by an order of magnitude. A detailed analysis of the HHCP and MC-CP kinetics indicates the existence of at least two different kinds of hydroxyl (C-OH) functional groups in GO, the major fraction (∼90%) of these groups being in the unusual "slow CP regime" in which the rate of ¹H T_1ρ relaxation is fast compared to the rate of cross-polarization. This ¹³C signal component is attributed to mobile C-OH groups interacting preferentially with fast-relaxing water molecules while the remaining carbons (∼10%) in the usual "fast CP regime" are assigned to C-OH groups involved in hydrogen bonding with neighboring hydroxyl and/or epoxy groups.

Efficient electron transmission in covalent organic framework nanosheets for highly active electrocatalytic carbon dioxide reduction

Efficient conversion of carbon dioxide (CO₂) into value-added products is essential for clean energy research. Design of stable, selective, and powerful electrocatalysts for CO₂ reduction reaction (CO₂RR) is highly desirable yet largely unmet. In this work, a series of metalloporphyrin-tetrathiafulvalene based covalent organic frameworks (M-TTCOFs) are designed. Tetrathiafulvalene, serving as electron donator or carrier, can construct an oriented electron transmission pathway with metalloporphyrin. Thus-obtained M-TTCOFs can serve as electrocatalysts with high FE_CO (91.3%, −0.7 V) and possess high cycling stability (>40 h). In addition, after exfoliation, the FE_CO value of Co-TTCOF nanosheets (~5 nm) is higher than 90% in a wide potential range from −0.6 to −0.9 V and the maximum FE_CO can reach up to almost 100% (99.7%, −0.8 V). The electrocatalytic CO₂RR mechanisms are discussed and revealed by density functional theory calculations. This work paves a new way in exploring porous crystalline materials in electrocatalytic CO₂RR.

The study of covalent organic frameworks (COFs) in electrocatalytic CO₂ reduction reaction (CO₂RR) has drawn much attention. Here the authors show a series of tetrathiafulvalene based COFs designed and exfoliated into nanosheets which exhibit high electrocatalytic CO₂RR performance.

Non-oxidative dehydrogenation of isobutane over supported vanadium oxide: nature of the active sites and coke formation

We combine Raman spectroscopy, EPR, XPS, temperature programmed reduction, XRD, ⁵¹V MAS ssNMR, TEM and N₂-physisorption to unravel structure–activity relationships during the non-oxidative dehydrogenation of isobutane over a V based catalyst.

Surface enhanced dynamic nuclear polarization solid-state NMR spectroscopy sheds light on Brønsted-Lewis acid synergy during the zeolite catalyzed methanol-to-hydrocarbon process

After a prolonged effort over two decades, the reaction mechanism of the zeolite-catalyzed methanol-to-hydrocarbon (MTH) process is now well-understood: the so-called 'direct mechanism' (via direct coupling of two methanol molecules) is responsible for the formation of the initial carbon-carbon bonds, while the hydrocarbon pool (HCP)-based dual cycle mechanism is responsible for the formation of reaction products. While most of the reaction events occur at zeolite Brønsted acid sites, the addition of Lewis acid sites (i.e., via the introduction of alkaline earth cations like calcium) has been shown to inhibit the formation of deactivating coke species and hence increase the catalyst lifetime. With the aim to have an in-depth mechanistic understanding, herein, we employ magic angle spinning surface-enhanced dynamic nuclear polarization solid-state NMR spectroscopy to illustrate that the inclusion of Lewis acidity prevents the formation of carbene/ylide species on the zeolite, directly affecting the equilibrium between arene and olefin cycles of the HCP mechanism and hence regulating the ultimate product selectivity and catalyst lifetime.

Recent developments in MAS DNP-NMR of materials

Solid-state NMR spectroscopy is a powerful technique for the characterization of the atomic-level structure and dynamics of materials. Nevertheless, the use of this technique is often limited by its lack of sensitivity, which can prevent the observation of surfaces, defects or insensitive isotopes. Dynamic Nuclear Polarization (DNP) has been shown to improve by one to three orders of magnitude the sensitivity of NMR experiments on materials under Magic-Angle Spinning (MAS), at static magnetic field B₀ ≥ 5 T, conditions allowing for the acquisition of high-resolution spectra. The field of DNP-NMR spectroscopy of materials has undergone a rapid development in the last ten years, spurred notably by the availability of commercial DNP-NMR systems. We provide here an in-depth overview of MAS DNP-NMR studies of materials at high B₀ field. After a historical perspective of DNP of materials, we describe the DNP transfers under MAS, the transport of polarization by spin diffusion and the various contributions to the overall sensitivity of DNP-NMR experiments. We discuss the design of tailored polarizing agents and the sample preparation in the case of materials. We present the DNP-NMR hardware and the influence of key experimental parameters, such as microwave power, magnetic field, temperature and MAS frequency. We give an overview of the isotopes that have been detected by this technique, and the NMR methods that have been combined with DNP. Finally, we show how MAS DNP-NMR has been applied to gain new insights into the structure of organic, hybrid and inorganic materials with applications in fields, such as health, energy, catalysis, optoelectronics etc.

Efficacious Electrochemical Oxygen Evolution from a Novel Co(II) Porphyrin/Pyrene-Based Conjugated Microporous Polymer

Oxygen evolution reaction (OER) is energetically challenging from the platform of making many photovoltaic devices such as metal-air batteries and water splitting systems because of its poor kinetics even when precious metals are used. Herein, a Co(II)-porphyrin/pyrene-comprised conjugated microporous polymer Co-MPPy-1 has been developed which shows efficient OER in alkaline medium. The material was characterized by Fourier transform infrared, solid-state ¹³C cross-polarization magic angle spinning nuclear magnetic resonance, N₂ volumetric adsorption/desorption analysis, scanning electron microscopy, ultra high resolution-transmission electron microscopy, X-ray photoelectron spectroscopy, and other physical studies. Co-MPPy-1 showed Brunauer-Emmett-Teller surface area of ∼501 m² g^-1. Co-MPPy-1 achieved a current density of 1 and 10 mA/cm^-2 at 340 and 420 mV, respectively. The turnover frequency calculated for the OER is 0.43 s^-1. The heterogeneity of this electrocatalyst was tested by chronoamperometric measurement and 1000 cycle recyclability test with retainment of the excellent electrochemical catalytic activity. This can be attributed to the presence of high density of Co(II) porphyrin unit and efficient charge transport in the π-conductive conjugated polymeric backbone.

Significant improvement of photocatalytic hydrogen evolution of diketopyrrolopyrrole-based donor–acceptor conjugated polymers through side-chain engineering

The hydrogen evolution rate of PDPP3B-O4 with butoxy chain was 5.53 mmol h⁻¹ g⁻¹ with 1% Pt loading (λ > 400 nm), increased 110 times than PDPP3B-C8 with octyl chain due to wider absorption spectrum and better wettability via side chain engineering.

Blind spheres of paramagnetic dopants in solid state NMR

Solid-state NMR on paramagnetically doped crystal structures gives information about the spatial distribution of dopants in the host. Paramagnetic dopants may render NMR active nuclei virtually invisible by relaxation, paramagnetic broadening or shielding. In this contribution blind sphere radii r0 have been reported, which could be extracted through fitting the NMR signal visibility function f(x) = exp(-ar03x) to experimental data obtained on several model compound series: La1-xLnxPO4 (Ln = Nd, Sm, Gd, Dy, Ho, Er, Tm, Yb), Sr1-xEuxGa2S4 and (Zn1-xMnx)3(PO4)2·4H2O. Radii were extracted for 1H, 31P and 71Ga, and dopants like Nd3+, Gd3+, Dy3+, Ho3+, Er3+, Tm3+, Yb3+ and Mn2+. The observed radii determined differed in all cases and covered a range from 5.5 to 13.5 Å. While these radii were obtained from the amount of invisible NMR signal, we also show how to link the visibility function to lineshape parameters. We show under which conditions empirical correlations of linewidth and doping concentration can be used to extract blind sphere radii from second moment or linewidth parameter data. From the second moment analysis of La1-xSmxPO431P MAS NMR spectra for example, a blind sphere size of Sm3+ can be determined, even though the visibility function remains close to 100% over the entire doping range. Dependence of the blind sphere radius r0 on the NMR isotope and on the paramagnetic dopant could be suggested and verified: for different nuclei, r0 shows a -dependence, γ being the gyromagnetic ratio. The blind sphere radii r0 for different paramagnetic dopants in a lanthanide series could be predicted from the pseudo-contact term.