Design and Regulation of Lower Disorder-to-Order Transition Behavior in the Strongly Interacting Block Copolymers

Superionic Bifunctional Polymer Electrolytes for Solid-State Energy Storage and Conversion

Achieving superionic conductivity from solid-state polymer electrolytes is an important task in the development of future energy storage and conversion technologies. Herein, a platform for innovative electrolyte technologies based on a bifunctional polymer, poly(3-hydroxy-4-sulfonated styrene) (PS-3H4S), is presented. By incorporating OH and SO₃ H functional groups at adjacent positions in the styrene repeating unit, "intra-monomer" hydrogen bonds are formed to effectively weaken the electrostatic interactions of the SO₃ ^- moieties in the polymer matrix with embedded ions, promoting rich structural and dynamic heterogeneity in the PS-3H4S electrolyte. Upon the incorporation of an ionic liquid, interconnected rod-like ion channels, which allow the decoupling of ion relaxation from polymer relaxation, are formed in the stiff motif of the polymeric domains passivated by interfacial ionic layers. This results in accelerated proton hopping through the glassy polymer matrix, and proton hopping becomes more pronounced at cryogenic temperatures down to -35 °C. The PS-3H4S/ionic liquid composite electrolytes exhibit a high ionic conductivity of 10^-3 S cm^-1 and high storage modulus of ≈100 MPa at 25 °C, and can be successfully applied in soft actuators and lithium-metal batteries.

Thickness-Dependent Photo-Aligned Thin-Film Morphologies of a Block Copolymer Containing an Azobenzene-Based Liquid Crystalline Polymer and a Poly(ionic liquid)

Photo-induced alignment of the thin-film morphologies of azobenzene-containing block copolymers (BCPs) is an effective method to obtain a uniaxial pattern of nanocylinders. Although film thickness is an important factor affecting the self-assembly of BCP thin films, the influence of film thickness on the photo-induced alignment of BCP thin-film morphology has never been systematically studied. Herein, we report the thickness-dependent photo-aligned film morphologies of the BCP containing an azobenzene-based liquid crystalline polymer and a poly(ionic liquid) (PIL), with a perfect uniaxial pattern of PIL nanocylinders. For films aligned with the unpolarized light (UPL), the out-of-plane PIL nanocylinders can be obtained in the film with a thickness of only 1L0 (∼30 nm, where L0 is the layer spacing of the hexagonally packed cylinder array), which is far lower than the thickness (more than 4L0) of the thermally annealed film needed to obtain the same morphology. This change is attributed to the orientation effect of UPL on azobenzene mesogens that suppresses the excluded volume effect. For the films aligned with linearly polarized light (LPL), to take advantage of the excluded volume effect to obtain the planar orientation of azobenzene mesogens, the thickness should be controlled to be no more than 3L0 to achieve an in-plane uniaxial alignment of PIL nanocylinders. The above relationship between the morphology and thickness of photo-aligned film eliminates the obstacles encountered in preparing films with well-ordered photo-aligned morphologies.

Microphase separation/crosslinking competition-based ternary microstructure evolution of poly(ether-b-amide)

The temperature dependence of the rheological properties of poly(ether-b-amide) (PEBA) segmented copolymer under oscillatory shear flow has been investigated. The magnitude of the dynamic storage modulus is affected by the physical microphase separation and irreversible crosslinking network, with the latter spontaneously forming between the polyamide segments and becoming the dominant factor in determining the microstructural evolution at temperatures well above the melting point of PEBA. From the rheological results, the initial temperature of the rheological properties dominated by the microphase separation and crosslinking (T cross) structures were determined, respectively. Based on the two obtained temperatures, the microstructure evolution upon the heating can be separated into the ternary microstructure domains: homogenous (temperature below ), microphase separation dominating (between and T cross), and crosslinking dominating domains (above T cross). When the PEBA is heated to above T cross, the content of crosslinking network increases with time and temperature, leading to an irreversible and non-negligible influence on the rheological, crystallization, and mechanical properties. A more pronounced strain-hardening phenomenon during the uniaxial stretching is observed for the sample with a higher content of crosslinking network.

The size and affinity effect of counterions on self-assembly of charged block copolymers

The effect of counterions' size and affinity on the microphase separated morphologies of neutral-charged diblock copolymers is investigated systematically using a random phase approximation (RPA) and self-consistent field theory (SCFT). The phase diagrams as a function of χ_AB and f_A at different counterion sizes and different affinities to neutral blocks are constructed, respectively. Stability limits calculated using the RPA are in good agreement with the disorder-body-centered cubic phase boundaries from SCFT calculations. It was found that increasing the size of counterions causes the phase diagram to shift upward and leftward, which is attributed to electrostatic interactions and the intrinsic volume of counterions. The domain size of the ordered phase shows an unexpected tendency that it decreases with increasing counterions' size. The counterions' distributions in H and G phases demonstrate that it is electrostatic interaction, instead of packing frustration, that plays a leading role in such systems. For finite size counterions, with the increase in affinity between counterions and neutral blocks, the phase diagram shifts upward, indicating the improved compatibility between different blocks. Furthermore, the affinity effect between counterions and neutral blocks can be mapped into an effective Flory parameter χ_AB ^' = χ_AB + 0.27χ_BC.

Interfacial self-assembly of amphiphilic conjugated block copolymer into 2D nanotapes

In the present work, the evaporation-induced interfacial self-assembly behavior of an amphiphilic conjugated polymer, poly(3-hexylthiophene)-b-poly(acrylic acid) (P3HT-b-PAA), at the oil-water interface is explored. Novel 2D nanotapes of P3HT-b-PAA are prepared via the interfacial self-assembly. It is inferred that P3HT segments adopt a special conformation at the oil-water interface, which facilitates the packing of alkyl side chains and π-π interaction. The UV-vis spectrum further confirms that the ordering degree of P3HT segments is increased while transmission IR and Raman spectroscopic studies suggest that the P3HT chains adopt a more planar conformation at the oil-water interface. It is proposed that the formation of the nanotapes is driven by the ordered packing of the P3HT chains at the oil-water interface. Finally, the packing model of the P3HT chains inside the nanotapes is roughly proposed.

Sub-10 nm Scale Lamellar Structures with a High Degree of Long-Range Order Fabricated by Orthogonal Self-Assembly of Crown Ether/Secondary Dialkylammonium Recognition and Metal···Metal/π-π Interactions

We here present an orthogonal self-assembly strategy to fabricate a series of metallosupramolecular polymers by coupling planar platinum(II) complexes and starlike poly(ε-caprolactone), through Pt···Pt/π-π interactions and host-guest recognition between secondary dialkylammonium salts and crown ether groups. The solid metallosupramolecular polymers exhibit sub-10 nm scale lamellar structures and one of them occupies an extraordinary degree of long-range order. The platinum(II) complexes can be regarded as an individual supramolecular block to microphase segregate the polymeric segment. Moreover, the metallosupramolecular polymers show intense luminescence and appreciable proton conductivity, originating from these two supramolecular connection modes, respectively. This work paves the way for fabricating metallosupramolecular polymers showing both highly ordered nanostructures and multifunctional properties.

Nanoscale Resolution of Electric-field Induced Motion in Ionic Diblock Copolymer Thin Films

Understanding the responses of ionic block copolymers to applied electric fields is crucial when targeting applications in areas such as energy storage, microelectronics, and transducers. This work shows that the identity of counterions in ionic diblock copolymers substantially affects their responses to electric fields, demonstrating the importance of ionic species for materials design. In situ neutron reflectometry measurements revealed that thin films containing imidazolium based cationic diblock copolymers, tetrafluoroborate counteranions led to film contraction under applied electric fields, while bromide counteranions drove expansion under similar field strengths. Coarse-grained molecular dynamics simulations were used to develop a fundamental understanding of these responses, uncovering a nonmonotonic trend in thickness change as a function of field strength. This behavior was attributed to elastic responses of microphase separated diblock copolymer chains resulting from variations in interfacial tension of polymer-polymer interfaces due to the redistribution of counteranions in the presence of electric fields.