Structural and Mechanical Properties of Supramolecular Polyethylenes

Rare-Earth Metallocenes for Polymerization of Olefins and Conjugated Dienes: From Fundamental Studies to Olefin Block Copolymers

The various steps in the mechanism of olefin polymerizations mediated by neutral rare-earth metallocene complexes are discussed. The complexes are either trivalent hydride and alkyl rare-earth compounds or divalent metallocenes that are activated by the monomer via an oxidation step. The stereospecific polymerizations of conjugated dienes based on the association of a cationic metallocene complex and an alkylaluminum and the polymerization mechanism based on monomer insertion into an aluminum-carbon bond are also discussed. The exploitation of metallocene complexes for the copolymerization of olefins with conjugated dienes is the subject of a third part of this review. The synthesis of new elastomers called ethylene butadiene rubber (EBR) is highlighted. Finally, the use of rare-earth metallocenes in macromolecular engineering is detailed. This includes the synthesis of functional polyolefins and block copolymers including thermoplastic elastomers.

Overcoming the entropy of polymer chains by making a plane with terminal groups: a thermoplastic PDMS with a long-range 1D structural order

Due to its unique physical and chemical properties, polydimethylsiloxane (PDMS) is widely used in many applications, in which covalent cross-linking is commonly used to cure the fluidic polymer. The formation of a non-covalent network achieved through the incorporation of terminal groups that exhibit strong intermolecular interactions has also been reported to improve the mechanical properties of PDMS. Through the design of a terminal group capable of two-dimensional (2D) assembly, rather than the generally used multiple hydrogen bonding motifs, we have recently demonstrated an approach for inducing long-range structural ordering of PDMS, resulting in a dramatic change in the polymer from a fluid to a viscous solid. Here we present an even more surprising terminal-group effect: simply replacing a hydrogen with a methoxy group leads to extraordinary enhancement of the mechanical properties, giving rise to a thermoplastic PDMS material without covalent cross-linking. This finding would update the general notion that less polar and smaller terminal groups barely affect polymer properties. Based on a detailed study of the thermal, structural, morphological and rheological properties of the terminal-functionalized PDMS, we revealed that 2D assembly of the terminal groups results in networks of PDMS chains, which are arranged as domains with long-range one-dimensional (1D) periodic order, thereby increasing the storage modulus of the PDMS to exceed its loss modulus. Upon heating, the 1D periodic order is lost at around 120 °C, while the 2D assembly is maintained up to ∼160 °C. The 2D and 1D structures are recovered in sequence upon cooling. Due to the thermally reversible, stepwise structural disruption/formation as well as the lack of covalent cross-linking, the terminal-functionalized PDMS shows thermoplastic behavior and self-healing properties. The terminal group presented herein, which can form a 'plane', might also drive other polymers to assemble into a periodically ordered network structure, thereby allowing for significant modulation of their mechanical properties.

Plasticization of a Semicrystalline Metallosupramolecular Polymer Network

The assembly of ligand-functionalized (macro)monomers with suitable metal ions affords metallosupramolecular polymers (MSPs). On account of the reversible and dynamic nature of the metal-ligand complexes, these materials can be temporarily (dis-)assembled upon exposure to a suitable stimulus, and this effect can be exploited to heal damaged samples, to facilitate processing and recycling, or to enable reversible adhesion. We here report on the plasticization of a semicrystalline, stimuli-responsive MSP network that was assembled by combining a low-molecular-weight building block carrying three 2,6-bis(1'-methylbenzimidazolyl) pyridine (Mebip) ligands and zinc bis(trifluoromethylsulfonyl)imide (Zn(NTf₂)₂). The pristine material exhibits high melting (T _m = 230 °C) and glass transition (T _g ≈ 157 °C) temperatures and offers robust mechanical properties between these temperatures. We show that this regime can be substantially extended through plasticization. To achieve this, the MSP network was blended with diisodecyl phthalate. The weight fraction of this plasticizer was systematically varied, and the thermal and mechanical properties of the resulting materials were investigated. We show that the T _g can be lowered by more than 60 °C and the toughness above the T _g is considerably increased.

Surface-enhanced Raman spectroscopy and density functional theory study of thymine-1-acetic acid interaction with silver nanoparticles

Thymine-1-acetic acid (TAA) is a modified nucleobase often used to add thymine functionality to materials. This study reports the Raman band assignments for TAA by comparing its experimental and density functional theory (DFT) simulated Raman spectra. Further comparison of experimental surface-enhanced Raman spectroscopy (SERS) of TAA on silver nanoparticles (Ag NPs) with simulated spectra of various complexes of xAg+ (x = 1, 2, or 3) and TAA reveals its likely adsorption orientation on the Ag NPs. This is one of the few studies that has achieved reasonably accurate simulation of SERS by employing multiple unconnected Ag+ ions, which could represent a compromise between a single atom or ion on one hand and a computationally expensive cluster on the other.

Ultra-high mechanical property and multi-layer porous structure of amidoximation ethylene-acrylic acid copolymer balls for efficient and selective uranium adsorption from radioactive wastewater

Adsorption uranium [U(VI)] from U-containing radioactive wastewater (URW) is a critical strategy for solving the resource shortage and environmental pollution in pace with the sustainable development of nuclear energy. However, the URW universally exhibits acidity and contains co-existing metal ions with high concentration. Herein, the amidoximation ethylene-acrylic acid copolymer balls (EAA-AO) with aciduric and super-high mechanical property were successfully synthesized through grafting diaminomaleonitrile and further treatment of amidoximation. Significantly, the mechanical properties of EAA-AO were not affected by the grafting process and maintained super-high mechanical properties. Furthermore, the -NH₂ and unreacted -CN groups in diaminomaleonitrile adjusted the pK_a to make the optimal pH be 4. In addition, the microstructure of EAA-AO was transformed from the original dense to multi-layer porous structure, which promoted the mass transfer process and the contact between uranyl ions (UO₂²⁺) and internal adsorption active sites. The adsorption capacity of EAA-AO was about 1.78 times that of EAA at pH = 4, and the adsorption capacity for U(VI) was about 8.17 times that of Ba²⁺ with the second highest adsorption capacity. Therefore, the EAA-AO exhibited ultra-high adsorption performance (q_e = 3.196 mg g^-1) in the artificial radioactive wastewater, laying a good foundation for subsequent large-scale industrial adsorption of U(VI) in nuclear industrial wastewater.

Hierarchical ordering and multilayer structure of poly(ε-caprolactone) end-functionalized by a liquid crystalline unit: role of polymer crystallization

This study elucidates the role of polymer crystallization in the structural organization of LC end-functionalized polymers and offers a potential method to tune the hierarchical structures of end-functionalized polymers.

Nucleobase-monofunctionalized supramolecular poly(l-lactide): controlled synthesis, competitive crystallization, and structural organization

Controlled synthesis, competitive crystallization, and crystallization-driven structural organization of thymine-monofunctionalized supramolecular poly(l-lactide).

Combinatorial Selection Among Geometrical Isomers of Discrete Long-Carbon-Chain Naphthalenediimides Induces Local Order at the Liquid/Solid Interface

We report two families of naphthalenediimides (NDIs) symmetrically functionalized with discrete carbon chains comprising up to 55 carbon atoms (C_n-NDI-C_n, n = 39, 44, 50, and 55) and their self-assembly at the 1-phenyloctane/highly oriented pyrolytic graphite interface (1-PO/HOPG interface). The compounds differ by the presence or absence of two or three internal double bonds in the carbon chains (unsaturated and saturated C_n-NDI-C_n, respectively). Combinatorial distributions of geometrical isomers displaying either the E- or Z-configuration at each double bond are obtained for the unsaturated compounds. Analysis of the self-assembled monolayers of equally long unsaturated and saturated C_n-NDI-C_n by scanning tunneling microscopy (STM) reveal that all C_n-NDI-C_n tend to form lamellar systems featuring alternating areas of aromatic cores and carbon chains. Extended chain lengths are found to significantly increase disorder in the self-assembled monolayers due to misalignments and enhanced strength of interchain interactions. This phenomenon is antagonized by the local order-inducing effect of the internal double bonds: unsaturated C_n-NDI-C_n give qualitatively more ordered self-assembled monolayers compared to their saturated counterparts. The use of combinatorial distributions of unsaturated C_n-NDI-C_n geometrical isomers does not represent a limitation to achieve local order in the self-assembled monolayers. The self-assembly process operates a combinatorial search and selects the geometrical isomer(s) affording the most thermodynamically stable pattern, highlighting the adaptive character of the system. Finally, the antagonistic interplay between the extended carbon chain lengths and the presence of internal double bonds brings to the discovery of the lamellar "phase C" morphology for unsaturated C_n-NDI-C_n with n ≥ 50.

Tuning layered superstructures in precision polymers

An approach to influence and control layered superstructures by varying the methylene sequence length between two consecutive functional groups in linear precision polymers containing 2,6-diaminopyridine (DAP) groups is presented. Layered superstructures with repeating units involving three monomeric units along the chain direction with very high coherence lengths upto 110 nm are observed in case of shorter alkyl segments, (16 and 18 [Formula: see text] units), while more conventional layer superstructures incorporating only one monomer are found for related polymers with 20 [Formula: see text] units per methylene sequence. A building block model explaining the unusually large periodicity of three monomeric units is proposed wherein layers containing crystalline or amorphous methylene sequences occur in different combinations. Occurrence of different layered structures depending on crystallization conditions, methylene sequence length as well as functional group type is explained by a competition of H-interactions between the DAP groups and the van der Waal forces between the hydrophobic methylene groups.

Supramolecular Polymer Brushes: Influence of Molecular Weight and Cross-Linking on Linear Viscoelastic Behavior

The origin of unique rheological response in supramolecular brush polymers is investigated using different polymer chemistries (poly(methyl acrylate) (PmA) and poly(ethylene glycol) (PEG)), topologies (linear or star), and molecular weights. A recently developed hydrogen-bonding moiety (1-(6-isocyanatohexyl)-3-(7-oxo-7,8-dihydro-1,8-naphthyridin-2-yl)-urea) (ODIN) was coupled to PmAs and PEGs to form supramolecular brush polymers, the backbone of which is formed by the associated moieties. At low molecular weights of monofunctionalized polymers (both PmA and PEG), the formed brushes are mostly composed of a thick backbone (with very short arms) and are surrounded by other similar brush polymers, which prevent them from diffusing and relaxing. Therefore, the monofunctionalized PmA with a low M_n does not show terminal flow even at the highest experimentally studied temperature (or at longest time scales). By increasing the length of the chains, supramolecular brushes with longer arms are obtained. Due to their lower density of thick backbones, these last ones have more space to move and their relaxation is therefore enhanced. In this work, we show that despite similarities between covalent and transient brush polymers, the elastic response in the latter does not originate from the brush entanglements with a large M_e (entanglement molecular weight), but it rather stems from the impenetrable rigid backbone and caging effect similar to the one described for hyperstars.

Supramolecular Dimerization in a Polymer Melt from Small-Angle X-ray Scattering and Rheology: A Miscible Model System

We present a structural and dynamic study on the simplest supramolecular hetero-association, recently investigated by the authors to prepare architectural homogeneous structures in the melt state, based on the bio-inspired hydrogen-bonding of thymine/diaminotriazine (thy–DAT) base-pairs. In the combination with an amorphous low T_g poly(butylene oxide) (PBO), no micellar structures are formed, which is expected for nonpolar polymers because of noncompatibility with the highly polar supramolecular groups. Instead, a clear polymer-like transient architecture is retrieved. This makes the heterocomplementary thy–DAT association an ideal candidate for further exploitation of the hydrogen-bonding ability in the bulk for self-healing purposes, damage management in rubbers or even the development of easily processable branched polymers with built-in plasticizer. In the present work, we investigate the temperature range from T_g + 20 °C to T_g + 150 °C of an oligomeric PBO using small-angle X-ray scattering (SAXS) and linear rheology on the pure thy and pure DAT monofunctionals and on an equimolar mixture of thy/DAT oligomers. The linear rheology performed at low temperature is found to correspond to fully closed-state dimeric configurations. At intermediate temperatures, SAXS probes the equilibrium between open and closed states of the thy–DAT mixtures. The temperature-dependent association constant in the full range between open and closed H-bonds and an enhancement of the monomeric friction coefficient due to the groups is obtained. The thy–DAT association in the melt is more stable than the DAT–DAT, whereas the thy–thy association seems to involve additional long-lived interactions.

One-pot syntheses of heterotelechelic α-vinyl,ω-methoxysilane polyethylenes and condensation into comb-like and star-like polymers with high chain end functionality

Crystalline and functional comb-like and star-like polyethylene architectures.

Order–disorder transition in supramolecular polymer combs/brushes with polymeric side chains

Three groups of supramolecular comb/brush polymers with polymeric side chains are developed, showing different mechanical properties and morphologies.

A Critical Approach to Polymer Dynamics in Supramolecular Polymers

Over the past few years, the concurrent (1) development of polymer synthesis and (2) introduction of new mathematical models for polymer dynamics have evolved the classical framework for polymer dynamics once established by Doi-Edwards/de Gennes. Although the analysis of supramolecular polymer dynamics based on linear rheology has improved a lot recently, there are a large number of insecurities behind the conclusions, which originate from the complexity of these novel systems. The interdependent effect of supramolecular entities (stickers) and chain dynamics can be overwhelming depending on the type and location of stickers as well as the architecture and chemistry of polymers. This Perspective illustrates these parameters and strives to determine what is still missing and has to be improved in the future works.

Temperature-dependent crystalline structure and phase transition of poly(butylene adipate) end-functionalized by multiple hydrogen-bonding groups

The crystallization kinetics, crystalline structure and phase transition of UPy-functionalized poly(butylene adipate) were investigated. UPy functionalization facilitated the formation of α crystals.