Conformations of Ring Polystyrenes in Semidilute Solutions and in Linear Polymer Matrices Studied by SANS

Rotaxane Formation of Multicyclic Polydimethylsiloxane in a Silicone Network: A Step toward Constructing "Macro-Rotaxanes" from High-Molecular-Weight Axle and Wheel Components

Rotaxanes consisting of a high-molecular-weight axle and wheel components (macro-rotaxanes) have high structural freedom, and are attractive for soft-material applications. However, their synthesis remains underexplored. Here, we investigated macro-rotaxane formation by the topological trapping of multicyclic polydimethylsiloxanes (mc-PDMSs) in silicone networks. mc-PDMS with different numbers of cyclic units and ring sizes was synthesized by cyclopolymerization of a α,ω-norbornenyl-functionalized PDMS. Silicone networks were prepared in the presence of 10-60 wt % mc-PDMS, and the trapping efficiency of mc-PDMS was determined. In contrast to monocyclic PDMS, mc-PDMSs with more cyclic units and larger ring sizes can be quantitatively trapped in the network as macro-rotaxanes. The damping performance of a 60 wt % mc-PDMS-blended silicone network was evaluated, revealing a higher tan δ value than the bare PDMS network. Thus, macro-rotaxanes are promising as non-leaching additives for network polymers.

Conformation of Network Strands in Polymer Gels

Small angle neutron scattering was used to measure single chain radii of gyration of end-linked polymer gels before and after cross-linking to calculate the prestrain, which is the ratio of the average chain size in a cross-linked network to that of a free chain in solution. The prestrain increased from 1.06 ± 0.01 to 1.16 ± 0.02 as gel synthesis concentration decreased near the overlap concentration, indicating that the chains are slightly more stretched in the network than in solution. Dilute gels with higher loop fractions were found to be spatially homogeneous. Form factor and volumetric scaling analyses independently confirmed that elastic strands stretch by 2-23% from Gaussian conformations to create a space-spanning network, with increased stretching as network synthesis concentration decreases. Prestrain measurements reported here serve as a point of reference for network theories that rely on this parameter for the calculation of mechanical properties.

The Topology of Polymer Brushes Determines Their Nanoscale Hydration

Time-of-flight neutron reflectometry (ToF-NR) performed under different relative humidity conditions demonstrates that polymer brushes constituted by hydrophilic, cyclic macromolecules exhibit a more compact conformation with lower roughness as compared to linear brush analogues, due to the absence of dangling chain ends extending at the polymer-vapor interface. In addition, cyclic brushes feature a larger swelling ratio and an increased solvent uptake with respect to their linear counterparts as a consequence of the increased interchain steric repulsions. It is proposed that differences in swelling ratios between linear and cyclic brushes come from differences in osmotic pressure experienced by each brush topology. These differences stem from entropic constraints. The findings suggest that to correlate the equilibrium swelling ratios at different relative humidity for different topologies a new form of the Flory-like expression for equilibrium thicknesses of grafted brushes is needed.

Threading-Unthreading Transition of Linear-Ring Polymer Blends in Extensional Flow

Adding small amounts of ring polymers to a matrix of their linear counterparts is known to increase the zero-shear-rate viscosity because of linear-ring threading. Uniaxial extensional rheology measurements show that, unlike its pure linear and ring constituents, the blend exhibits an overshoot in the stress growth coefficient. By combining these measurements with ex-situ small-angle neutron scattering and nonequilibrium molecular dynamics simulations, this overshoot is shown to be driven by a transient threading-unthreading transition of rings embedded within the linear entanglement network. Prior to unthreading, embedded rings deform affinely with the linear entanglement network and produce a measurably stronger elongation of the linear chains in the blend compared to the pure linear melt. Thus, rings uniquely alter the mechanisms of transient elongation in linear polymers.

Melt rheology of tadpole-shaped polystyrenes with different ring sizes

In this study, linear melt rheology of a single-tail tadpole-shaped polystyrene, ST-30/80, having ring and linear sizes of MR ∼ 30 kg mol-1 and ML ∼ 80 kg mol-1, respectively, was examined, and the effect of the ring size on rheological properties of tadpole polymers was discussed by comparing with the data of the previously reported tadpole samples having MR ∼ 60 kg mol-1. ST-30/80 exhibits an entanglement plateau and shows a clearly slower terminal relaxation than that of its component ring and linear polymers. When the zero-shear viscosity η0 for ST-30/80 is plotted against the molecular weight of a linear tail chain, the data point lies on the single curve of η0 for 4- and 6-arm star polymers and the single-tail tadpoles with MR ∼ 60 kg mol-1. These results suggest that the tadpole molecule in this study spontaneously forms a characteristic entanglement network, i.e., the intermolecular ring-linear threading, in the same manner as the previous tadpole samples, even though the size of the ring part is just slightly larger than the entanglement molecular weight (i.e., MR ∼ 1.8Me).

Stress relaxation in symmetric ring-linear polymer blends at low ring fractions

We combine linear viscoelastic measurements and modelling in order to explore the dynamics of blends of the same-molecular-weight ring and linear polymers in the regime of the low volume fraction (0.3 or lower) of the ring component. The stress relaxation modulus is affected by the constraint release (CR) of both rings and linear components due to the motion of linear chains. We develop a CR-based model of ring-linear blends that predicts the stress relaxation function in the low fraction regime of ring component in excellent agreement with experiments. Rings trapped by their entanglements with linear chains can only relax by linear-chain-induced constraint release, resulting in much slower relaxation of rings than of linear chains. The relative viscosity η ( ϕ R * ) / η L of the blend with respect to the linear melt viscosity η _L at ring overlap volume fraction ϕ R * increases proportionally to the square root of ring molecular weight M w , R . Our experimental results clearly demonstrate that it is possible to enhance the viscosity and simultaneously the structural relaxation time of linear polymer melts by adding a small fraction of ring polymers. These results not only provide fundamental insights into the physics of the CR process but also suggest ways to fine-tune the flow properties of linear polymers by means of adding rings.

Threading of Unconcatenated Ring Polymers at High Concentrations: Double-Folded vs Time-Equilibrated Structures

Unconcatenated ring polymers in concentrated solutions and melt are remarkably well described as double-folded conformations on randomly branched primitive trees. This picture though contrasts recent evidence for extensive intermingling between close-by rings in the form of long-lived topological constraints or threadings. Here, we employ the concept of ring minimal surface to quantify the extent of threadings in polymer solutions of the double-folded rings vs rings in equilibrated molecular dynamics computer simulations. Our results show that the double-folded ring polymers are significantly less threaded compared to their counterparts at equilibrium. Second, threadings form through a slow process whose characteristic time-scale is of the same order of magnitude as that of the diffusion of the rings in solution. These findings are robust, being based on universal (model-independent) observables as the average fraction of threaded length or the total penetrations between close-by rings and the corresponding distribution functions.