Tandem Metathesis Polymerization-Induced Self-Assembly to Nanostructured Block Copolymer and the Controlled Triazolinedione Modification for Enhancing Dielectric Properties

Engineering the Dielectric Constants of Polymers: From Molecular to Mesoscopic Scales

Polymers are essential components of modern-day materials and are widely used in various fields. The dielectric constant, a key physical parameter, plays a fundamental role in the light-, electricity-, and magnetism-related applications of polymers, such as dielectric and electrical insulation, battery and photovoltaic fabrication, sensing and electrical contact, and signal transmission and communication. Over the past few decades, numerous efforts have been devoted to engineering the intrinsic dielectric constant of polymers, particularly by tailoring the induced and orientational polarization modes and ferroelectric domain engineering. Investigations into these methods have guided the rational design and on-demand preparation of polymers with desired dielectric constants. This review article exhaustively summarizes the dielectric constant engineering of polymers from molecular to mesoscopic scales, with emphasis on application-driven design and on-demand polymer synthesis rooted in polymer chemistry principles. Additionally, it explores the key polymer applications that can benefit from dielectric constant regulation and outlines the future prospects of this field.

Temperature-Resistant Intrinsic High Dielectric Constant Polyimides: More Flexibility of the Dipoles, Larger Permittivity of the Materials

High dielectric constant polymers have been widely studied and concerned in modern industry, and the induction of polar groups has been confirmed to be effective for high permittivity. However, the way of connection of polar groups with the polymer backbone and the mechanism of their effect on the dielectric properties are unclear and rarely reported. In this study, three polyimides (C0-SPI, C1-SPI, and C2-SPI) with the same rigid backbone and different linking groups to the dipoles were designed and synthesized. With their rigid structure, all of the polyimides show excellent thermal stability. With the increase in the flexibility of linking groups, the dielectric constant of C0-SPI, C1-SPI, and C2-SPI enhanced in turn, showing values of 5.6, 6.0, and 6.5 at 100 Hz, respectively. Further studies have shown that the flexibility of polar groups affected the dipole polarization, which was positively related to the dielectric constant. Based on their high permittivity and high temperature resistance, the polyimides exhibited outstanding energy storage capacity even at 200 °C. This discovery reveals the behavior of the dipoles in polymers, providing an effective strategy for the design of high dielectric constant materials.

Controllable synthesis and structural design of novel all-organic polymers toward high energy storage dielectrics

As the core unit of energy storage equipment, high voltage pulse capacitor plays an indispensable role in the field of electric power system and electromagnetic energy related equipment. The mostly utilized polymer materials are metallized polymer thin films, which are represented by biaxially oriented polypropylene (BOPP) films, possessing the advantages including low cost, high breakdown strength, excellent processing ability, and self-healing performance. However, the low dielectric constant (εr < 3) of traditional BOPP films makes it impossible to meet the demand for increased high energy density. Controlled/living radical polymerization (CRP) and related techniques have become a powerful approach to tailor the chemical and physical properties of materials and have given rise to great advances in tuning the properties of polymer dielectrics. Although organic-inorganic composite dielectrics have received much attention in previous studies, all-organic polymer dielectrics have been proven to be the most promising choice because of its light weight and easy large-scale continuous processing. In this short review, we begin with some basic theory of polymer dielectrics and some theoretical considerations for the rational design of dielectric polymers with high performance. In the guidance of these theoretical considerations, we review recent progress toward all-organic polymer dielectrics based on two major approaches, one is to control the polymer chain structure, containing microscopic main-chain and side-chain structures, by the method of CRP and the other is macroscopic structure design of all-organic polymer dielectric films. And various chemistry and compositions are discussed within each approach.

1,2-Disubstituted 1,2-Dihydro-1,2,4,5-tetrazine-3,6-dione as a Dynamic Covalent Bonding Unit at Room Temperature

Dynamic covalent bonds are useful tools in a wide range of applications. Although various reversible chemical reactions have been studied for this purpose, the requirement for harsh conditions, such as high temperature and low or high pH, to activate generally stable covalent bonds limits their potential applications involving biomolecules or household utilization. Here, we report the design, synthesis, characterization, and dynamic covalent bonding properties of 1,2-disubstituted 1,2-dihydro-1,2,4,5-tetrazine-3,6-dione (TETRAD). Hetero-Diels-Alder reactions of TETRAD with furan derivatives and their retro-reactions proceeded rapidly at room temperature under neutral conditions, enabling a chemically induced sol-gel transition system.

Influence of Solvent on RAFT-mediated Polymerization of Benzyl Methacrylate (BzMA) and How to Overcome the Thermodynamic/Kinetic Limitation of Morphology Evolution during Polymerization-Induced Self-Assembly

Polymerization-induced self-assembly (PISA) has been demonstrated to be a powerful strategy to produce polymeric nano-objects of various morphologies. Dependent on the solubility of monomers, PISA is usually classified into two...

Tandem metathesis depolymerization and cyclopolymerization toward flexible-rigid block copolymer with unique damping properties

Metathesis depolymerization (MDP) of natural rubber (NR) was readily conducted to afford depolymerized NR (dNRx) bearing the living chain end, which can initiate metathesis cyclopolymerization (MCP) of 1,6-heptadiyne monomers to...

Practical direct synthesis of N-aryl-substituted azacycles from N-alkyl protected arylamines using TiCl4 and DBU

A novel transformation of N-alkyl protected arylamines and cyclic ethers into N-aryl substituted azacycles is described. Alkyl groups have been used for the protection of amines in organic syntheses. In this synthesis, N-alkyl protected arylamines were reacted with cyclic ethers in the presence of TiCl4 and DBU, crucial reagents affording five- and six-membered azacycles. In particular, utilization of the novel TiCl4/DBU-mediated reaction allows various N-alkyl protected arylamines such as N-methyl-, N-ethyl-, N-isopropyl, and N-tert-butyl arylamines to be readily converted into N-aryl substituted azacycles in high yields. This practical approach using various N-alkyl arylamines leads to the efficient preparation of azacycles.

Core-functionalized nanoaggregates: preparation via polymerization-induced self-assembly and their applications

Core-functionalized nanoaggregates can be prepared by a combination of polymerization-induced self-assembly (PISA) and post-polymerization modification.

Direct formation of nano-objects via in situ self-assembly of conjugated polymers

The development of the polymer self-assembly method “in situ nanoparticlization of conjugated polymers” is discussed in this Perspective.

Metathesis Cyclopolymerization Triggered Self-Assembly of Azobenzene-Containing Nanostructure

Azobenzene (AB) units were successfully introduced into poly(1,6-heptadiyne)s in order to ensure smooth synthesis of double- and single-stranded poly(1,6-heptadiyne)s (P1 and P2) and simultaneously realize the self-assembly by Grubbs-III catalyst-mediated metathesis cyclopolymerization (CP) of AB-functionalized bis(1,6-heptadiyne) and 1,6-heptadiyne monomers (M1 and M2). Monomers and polymers were characterized by 1H NMR, mass spectroscopy, and GPC techniques. The double-stranded poly(1,6-heptadiyne)s exhibited a large scale of ordered ladder nanostructure. This result was attributed to the π-π attractions between end groups along the longitudinal axis of the polymers and van der Waals interactions between the neighboring polymeric backbones. While the Azo chromophore connected in the side chain of P2 induced conformation of micelles nanostructure during the CP process without any post-treatment. Furthermore, the photoisomerization of Azo units had an obviously different regulatory effect on the conjugated degree of the polymer backbone, especially for the single-stranded P2, which was attributed to the structural differences and the interaction between AB chromophores in the polymers.

Assembly of Short-Chain Amphiphilic Homopolymers into Well-Defined Particles

Linear homopolymers of norbornene (NBE) derivatives equipped with short-chain alcohol pendant groups were prepared by ring-opening metathesis polymerization (ROMP) and subsequently assembled into well-defined structures in alcohol solvents. The ratios of hydrophobic carbons and hydrophilic alcohol groups at the repeating monomeric unit in these short-chain amphiphilic polymers were found to play an important role in determining the size and distribution of the final globular structures. Unlike the assembly of other linear homo- and copolymers possessing long-chain amphiphilicity, NBE-based linear polymers were readily transformed into spherical particles with a layered conformation, whose sizes range from a few hundred nanometers to micrometers with narrow distributions, simply by controlling the concentration and molecular weights of the linear homopolymers without using any surfactants. In addition, the degree of the intermolecular forces with solvents (e.g., solvation) possessing different surface tensions and polarities highly affected the final diameter and distribution of the polymer particles, implying the importance of the selection of a proper solvent to regulate their structural features. As such, understanding the assembly of these types of short-chain homopolymers into uniform particles can allow for regulating the transformation of diverse linear amphiphilic polymers into precisely controlled structures for various applications.

Polymerization techniques in polymerization-induced self-assembly (PISA)

The development of controlled/“living” polymerization greatly stimulated the prosperity of the fabrication and application of block copolymer nano-objects.

Ring-opening metathesis polymerization-induced self-assembly (ROMPISA)

Ring-opening metathesis polymerization-induced self-assembly (ROMPISA) has expanded the preparation of PISA nano-objects beyond radical polymerization approaches. In this highlight article, we summarize current advances and existing challenges in ROMPISA methodologies.