Epitaxial Recrystallization of IPBu in Form II on an Oriented IPS Film Initially Induced by Oriented Form I IPBu

Lattice Matching and Microstructure of the Aromatic Amide Fatty Acid Salts Nucleating Agent on the Crystallization Behavior of Recycled Polyethylene Terephthalate

To solve the decrease in the crystallization, mechanical and thermal properties of recycled polyethylene terephthalate (rPET) during mechanical recycling, the aromatic amide fatty acid salt nucleating agents Na-4-ClBeAmBe, Na-4-ClBeAmGl and Na-4-ClAcAmBe were synthesized and the rPET/nucleating agent blend was prepared by melting blending. The molecular structure, the thermal stability, the microstructure and the crystal structure of the nucleating agent were characterized in detail. The differential scanning calorimetry (DSC) result indicated that the addition of the nucleating agent improved the crystallization temperature and accelerated the crystallization rate of the rPET. The nucleation efficiencies (NE) of the Na-4-ClBeAmBe, Na-4-ClBeAmGl and Na-4-ClAcAmBe were increased by 87.2%, 87.3% and 41.7% compared with rPET which indicated that Na-4-ClBeAmBe and Na-4-ClBeAmGl, with their long-strip microstructures, were more conducive to promoting the nucleation of rPET. The equilibrium melting points (Tm0) of rPET/Na-4-ClBeAmBe, rPET/Na-4-ClBeAmGl and rPET/Na-4-ClAcAmBe were increased by 11.7 °C, 18.6 °C and 1.9 °C compared with rPET, which illustrated that the lower mismatch rate between rPET and Na-4-ClBeAmGl (0.8% in b-axis) caused Na-4-ClBeAmGl to be the most capable in inducing the epitaxial crystallization and orient growth along the b-axis direction of the rPET. The small angle X-ray diffraction (SAXS) result proved this conclusion. Meanwhile, the addition of Na-4-ClBeAmGl caused the clearest increase in the rPET of its flexural strength and heat-distortion temperature (HDT) at 20.4% and 46.7%.

Epitaxy-Directed Self-Assembly of Copolymers and Polymer Blends

Directed self-assembly of materials into patterned structures is of great importance since the performance of them depends remarkably on their multiscale hierarchical structures. Therefore, purposeful structural regulation at different length scales through crystallization engineering provides an opportunity to modify the properties of polymeric materials. Here, an epitaxy-directed self-assembly strategy for regulating the pattern structures including phase structure as well as crystal modification and orientation of each component for both copolymers and polymer blends is reported. Owing to the specific crystallography registration between the depositing crystalline polymers and the underlying crystalline substrate, not only order phase structure with controlled size at nanometer scale but also the crystal structure and chain orientation of each component within the separated phases for both copolymers and polymer blend systems can be precisely regulated.

Polymerization of Allyltrimethylisilane and 4-Methyl-1-Pentene by Using Metallocene Catalysts

Polymers of higher olefin, obtained by Ziegler-type polymerization, have been used in some critical fields, e.g., as the membrane for extracorporeal membrane oxygenation (ECMO), which plays an important role in the treatment of patients with severe COVID-19. The polymer obtained by a single-site catalyst, e.g., metallocene catalysts, demonstrated a higher performance. The homo- and co-polymerization of allyltrimethylisilane (ATMS) and 4-methyl-1-pentene (4M1P) were conducted using syndiospecific (cat 1) and isospecific (cat 2) metallocene catalysts. Cat 1 showed low conversions and provided a polymer with a higher molecular weight, while cat 2 behaved oppositely. ¹³C-NMR spectra certified the stereotacticity of the resultant polymer, and the resonance of the carbon atom of CH₂ (αα') between the two tertiary carbon atoms of the ATMS and 4M1P units were observed. This could be the evidence of the formation of a true copolymer. The crystallization of the polymer was explored using a differential scanning calorimeter (DSC) and wide angle X-ray diffraction (WAXD). All homopolymers and some of the copolymers showed high melting temperatures and low melting enthalpies. The WAXD patterns of the syndiotactic polymer and isotactic homopolymer or the ATMS-rich copolymer were consistent with the reported literature, but the isotactic 4M1P-rich copolymer provided the crystal form I, which is unusual for a 4M1P polymer without any pretreatment.

Investigation of the mechanism of small size effect in carbon-based supercapacitors

A small size effect could be conducive to enhancing the electrochemical performance, while the mechanism by which they also increase the capacitance for carbon electrode materials has not been established. Here, ultrasmall polyacrylonitrile particles with controllable sizes are supported on poly(ionic liquid)s microspheres (PILMs/PAN) by epitaxial polymerization growth strategy. Unlike traditional subtraction formulas in developing a porous architecture, we report on the synthesis of creating numerous micro/mesopores in carbon materials by addition theorem, and thus making for the perfection of packing density, which has not been reported yet. As an example, PILMC/PAN-L with a well-balanced specific surface area of 875.38 m² g^-1 and packing density of 1.05 g cm^-3 demonstrated gravimetric and volumetric capacitances of 309 F g^-1 and 324.45 F cm^-3 at 0.5 A g^-1, showing good rate performance and stable cyclability. Moreover, the underlying mechanism is thoroughly developed using multiple electrochemical methods. On this basis, this work would afford avenues to further enhancing the electrochemical performance, especially in exploring advanced carbon materials.

The II-I Phase Transition Behavior of Butene-1 Copolymers with Hydroxyl Groups

The crystallization and II–I phase transition of functionalized polybutene-1 with hydroxyl groups were investigated by differential scanning calorimetry. The results show that the incorporated hydroxyl groups increase the nucleation density but decrease the growth rate in melt crystallization. Interestingly, for the generated tetragonal form II, the presence of polar hydroxyl groups can effectively accelerate the phase transition into the thermodynamically stable modification of trigonal form I, especially with stepwise annealing and high incorporation. Using stepwise annealing, II–I phase transition was enhanced by an additional nucleation step performed at a relatively low temperature, and the optimal nucleation temperature to obtain the maximum transition degree was ‒10 °C, which is independent from the content of hydroxyl groups. Furthermore, the accelerating effect of hydroxyl groups on the II–I transition kinetics can be increased by reducing the crystallization temperature when preparing form II crystallites. These results provide a potential molecular design approach for developing polybutene-1 materials.

Orientation of Poly(ε-caprolactone) in Its Poly(vinyl chloride) Blends Crystallized under Strain: The Role of Strain Rate

The blends of high and low molecular weights poly(ε-caprolactone) (PCL) with poly(vinyl chloride (PVC) were prepared. The samples before and after the crystallization of PCL were uniaxially stretched to different draw ratios. The orientation features of PCL in a stretched crystalline PCL/PVC blend and crystallized from the amorphous PCL/PVC blends under varied strains were studied by wide-angle X-ray diffraction (WAXD) diffraction. It was found that a uniaxial stretching of crystalline PCL/PVC blend with high molecular weight PCL results in the c-axis orientation along the stretching direction, as is usually done for the PCL bulk sample. For the stretched amorphous PCL/PVC blend samples, the crystallization of high molecular weight PCL in the blends under a draw ratio of λ = 3 with a strain rate of 6 mm/min leads to a ring-fiber orientation. In the samples with draw ratios of λ = 4 and 5, the uniaxial orientation of a-, b-, and c-axes along the strain direction coexist after crystallization of high molecular weight PCL. With a draw ratio of λ = 6, mainly the b-axis orientation of high molecular weight PCL is identified. For the low molecular weight PCL, on the contrary, the ring-fiber and a-axis orientations coexist under a draw ratio of λ = 3. The a-axis orientation decreases with the increase of draw ratio. When the λ reaches 5, only a poorly oriented ring-fiber pattern has been recognized. These results are different from the similar samples stretched at a higher strain rate as reported in the literatures and demonstrate the important role of strain rate on the crystallization behavior of PCL in its blend with PVC under strain.

Fabrication of Dipole-Aligned Thin Films of Porphyrin J-Aggregates over Large Surfaces

We report a new approach for large-scale alignment of micron-sized J-aggregates of a derivative of porphyrin onto planar glass substrates. We applied a unidirectional nitrogen flow to an aqueous dye drop deposited onto a glass substrate to form an about 5 nm thick film of aligned J-aggregates over macroscopic surface areas up to several millimeters. The inter-aggregate distance is ∼500 nm, and it scales with the nitrogen pressure. We verified the film thickness and J-aggregate alignment using multimodal microscopy and spectroscopy techniques. Our technique is fast, simple, and cost-effective for producing large two-dimensional (2-D) arrays of aligned emitters.

Morphological Evolution of Tetrachlorinated Perylene Bisimides with Lengthy Alkyl Substituent Polycrystalline Thin Films during Reversible Phase Transitions

The phase behavior and related morphological evolution of thin films of lengthy alkyl substituted core-tetrachlorinated perylene bisimide (C18-4ClPBI), a large π-conjugated molecule, have been studied. It is found that the C18-4ClPBI can exist in two different crystalline phases depending on temperature, which transform reversibly in heating and cooling processes. The X-ray diffraction results demonstrate that the two crystalline forms of C18-4ClPBI exhibit a similar packing geometry but with different unit cell dimensions. It is confirmed that the low-temperature phase is packed more compactly than its high-temperature counterpart. During high-temperature to low-temperature crystalline phase transition, nonbirefringent protrusions were observed, which disassembled in the reverse crystalline phase transition process during heating. The exact formation mechanism of the protrusions is not clear at the moment. Nevertheless, their influence on the transfer characteristics of the polycrystalline C18-4ClPBI thin film has been clearly illustrated.

A new perspective to enhance the II–I transition of polybutene-1

The bottleneck for the application and potential utilization of polybutenene-1 (PB-1) with excellent physical and mechanical properties is its inevitable phase transition.