Multimechanophore Graft Polymers: Mechanochemical Reactions at Backbone–Arm Junctions

Multiple Force-Triggered Downconverted and Upconverted Emission in Polymers Containing Diels-Alder Adducts

Fluorescent mechanophores can indicate the deformation or damage in polymers. The development of mechanophores with multi-triggered response is of great interest. Herein, Diels-Alder (DA) adducts are incorporated into linear poly(methyl acrylate) PMA-BA and network poly(hexyl methacrylate) (PHMA) as mechanophores to detect the stress caused by ultrasound, freezing, and compression. The DA mechanophores undergo retro-DA reaction to release 9-styrylanthracene chromophore upon applying force, resulting in cyan fluorescence. The dissociation ratio of the DA mechanophore after pulsed ultrasonication of PMA-BA solution for 240 minutes is estimated to be 52 % by absorption spectra and 1H NMR. Additionally, the rate constant of mechanical cleavage is calculated to be 1.2×10-4 min-1⋅kDa-1 with the decrease in molecular weight from 69 to 22 kDa measured by gel permeation chromatography. Freezing of PHMA gels as well as compression of PHMA bulk samples turn-on the DA mechanophores, revealing the microscale fracture. Photon upconversion responses toward various force stimuli are also achieved in both polymer solutions and bulk samples by doping platinum octaethylporphyrin (PtOEP) or palladium meso-tetraphenyltetrabenzoporphyrin (PdTPTBP) sensitizers with multiple excitation wavelengths.

Experimental quantitation of molecular conditions responsible for flow-induced polymer mechanochemistry

Fragmentation of macromolecular solutes in rapid flows is of considerable fundamental and practical importance. The sequence of molecular events preceding chain fracture is poorly understood, because such events cannot be visualized directly but must be inferred from changes in the bulk composition of the flowing solution. Here we describe how analysis of same-chain competition between fracture of a polystyrene chain and isomerization of a chromophore embedded in its backbone yields detailed characterization of the distribution of molecular geometries of mechanochemically reacting chains in sonicated solutions. In our experiments the overstretched (mechanically loaded) chain segment grew and drifted along the backbone on the same timescale as, and in competition with, the mechanochemical reactions. Consequently, only <30% of the backbone of a fragmenting chain is overstretched, with both the maximum force and the maximum reaction probabilities located away from the chain centre. We argue that quantifying intrachain competition is likely to be mechanistically informative for any flow fast enough to fracture polymer chains.

Swelling-induced Mechanochromism in Multinetwork Polymers

We report a novel and versatile approach to achieving swelling-induced mechanochemistry using a multinetwork (MN) strategy that enables polymer networks to repeatedly swell with monomers and solvents. The isotropic expansion of the first network (FN) provides sufficient force to drive the mechanochemical scission of a radical-based mechanophore, difluorenylsuccinonitrile (DFSN). Although prompt recombination generally occurs in such highly mobile environments, the resulting pink radicals are kinetically stabilized in the gels, probably due to limited diffusion in the extended polymer chains. Moreover, the DFSN embedded in the isotropically strained chain exhibits increased thermal reactivity, which can be reasonably explained by an entropic contribution of the FN to the dissociation. The utility of the MN polymers is demonstrated not only in terms of swelling-force-induced network modification, but also in the context of tunable reactivity of the dissociative unit through proper design of the hierarchical network architecture.

Competitive Activation Experiments Reveal Significantly Different Mechanochemical Reactivity of Furan–Maleimide and Anthracene–Maleimide Mechanophores

During the past two decades, our understanding of mechanochemical reactivity has advanced considerably. Nevertheless, an incomplete knowledge of structure-activity relationships and the principles that govern mechanochemical transformations limits molecular design. The experimental development of mechanophores has thus benefited from simple computational tools like CoGEF, from which quantitative metrics like rupture force can be extracted to estimate reactivity. Furan-maleimide (FM) and anthracene-maleimide (AM) Diels-Alder adducts are widely studied mechanophores that undergo retro-Diels-Alder reactions upon mechanical activation in polymers. Despite possessing significantly different thermal stability, similar rupture forces predicted by CoGEF calculations suggest that these compounds exhibit similar mechanochemical reactivity. Here, we directly probe the relative mechanochemical reactivity of FM and AM adducts through competitive activation experiments. Ultrasound-induced mechanochemical activation of bis-adduct mechanophores comprising covalently tethered FM and AM subunits reveals pronounced selectivity-as high as ∼13:1-for reaction of the FM adduct compared to the AM adduct. Computational models provide insight into the greater reactivity of the FM mechanophore, indicating a more efficient mechanochemical coupling for the FM adduct compared to the AM adduct. The methodology employed here to directly interrogate the relative reactivity of two different mechanophores using a tethered bis-adduct configuration may be useful for other systems where more common sonication-based approaches are limited by poor sensitivity.

Polymer and small molecule mechanochemistry: closer than ever

The formation and scission of chemical bonds facilitated by mechanical force (mechanochemistry) can be accomplished through various experimental strategies. Among them, ultrasonication of polymeric matrices and ball milling of reaction partners have become the two leading approaches to carry out polymer and small molecule mechanochemistry, respectively. Often, the methodological differences between these practical strategies seem to have created two seemingly distinct lines of thought within the field of mechanochemistry. However, in this Perspective article, the reader will encounter a series of studies in which some aspects believed to be inherently related to either polymer or small molecule mechanochemistry sometimes overlap, evidencing the connection between both approaches.

Concurrent and Mechanochemical Activation of Two Distinct and Latent Fluorophores via Retro-Diels-Alder Reaction of an Anthracene-Aminomaleimide Adduct

Generally, a typical mechanochromophore produces color change through chemical transformation into one or two identical new chromophores/fluorophores under applied mechanical force. Herein, we introduce a novel mechanophore based on an anthracene-aminomaleimide Diels-Alder (DA) adduct featuring two distinct and latent fluorophores. This nonfluorescent mechanophore undergoes retro-DA reaction upon mechanochemical activation in solution and the solid state, generating the respective anthracene and aminomaleimide fragments simultaneously, both of which are highly emissive with different fluorescent colors. In addition, the aminomaleimide fluorophore exhibits sensitive fluorescence on-off response to protic solvents or polar solvents, which enables dual-color mechanochromism from this single mechanophore.

Action of Mechanical Forces on Polymerization and Polymers

In this review, we summarize recent developments in the field of the mechanochemistry of polymers. The aim of the review is to consider the consequences of mechanical forces and actions on polymers and polymer synthesis. First, we review classical works on chemical reactions and polymerization processes under strong shear deformations. Then, we analyze two emerging directions of research in mechanochemistry-the role of mechanophores and, for the first time, new physical phenomena, accompanying external impulse mechanical actions on polymers. Mechanophores have been recently proposed as sensors of fatigue and cracks in polymers and composites. The effects of the high-pressure pulsed loading of polymers and composites include the Dzyaloshinskii-Moriya effect, emission of superradiation and the formation of metal nanoparticles. These effects provide deeper insight into the mechanism of chemical reactions under shear deformations and pave the way for further research in the interests of modern technologies.

Activation of Antibiotic-Grafted Polymer Brushes by Ultrasound

The ultrasound-mediated activation of drugs from macromolecular architectures using the principles of polymer mechanochemistry (sonopharmacology) is a promising strategy to gain spatiotemporal control over drug activity. Yet, conceptual challenges limit the applicability of this method. Especially low drug-loading content and low mechanochemical efficiency require the use of high carrier mass concentrations and prolonged exposure to ultrasound. Moreover, the activated drug is generally shielded by the hydrodynamic coil of the attached polymer fragment leading to a decreased drug potency. Here we present a carrier design for the ultrasound-induced activation of vancomycin, which is deactivated with its H-bond-complementary peptide target sequence. We show that the progression from mechanophore-centered linear chains to mechanophore-decorated polymer brushes increases drug-loading content, mechanochemical efficiency, and drug potency. These results may serve as a design guideline for future endeavors in the field of sonopharmacology.

Mechanochemical Reactivity of Bottlebrush and Dendronized Polymers: Solid vs. Solution States

We explored the mechanochemical degradation of bottlebrush and dendronized polymers in solution (with ultrasonication, US) and solid states (with ball-mill grinding, BMG). Over 50 polymers were prepared with varying backbone length and arm architecture, composition, and size. With US, we found that bottlebrush and dendronized polymers exhibited consistent backbone scission behavior, which was related to their elongated conformations in solution. Considerably different behavior was observed with BMG, as arm architecture and composition had a significant impact on backbone scission rates. Arm scission was also observed for bottlebrush polymers in both solution and solid states, but only in the solid state for dendronized polymers. Motivated by these results, multi-mechanophore polymers with bottlebrush and dendronized polymer architectures were prepared and their reactivity was compared. Although dendronized polymers showed slower arm-scission, the selectivity for mechanophore activation was much higher. Overall, these results have important implications to the development of new mechanoresponsive materials.

The influence of polymer architecture in polymer mechanochemistry

Polymer architecture is an important factor in polymer mechanochemistry. In this Feature Article, we summarize recent developments in utilizing polymer architecture to modulate mechanochemical reactions within polymers, or more specifically, the location and rates of bond scission events that lead to polymer fragmentation or mechanophore activation. Various well-defined architectures have been explored, including those of cyclic, intramolecularly cross-linked, dendritic, star, bottlebrush, and dendronized polymers. We primarily focus on describing the enhancement or suppression of mechanochemical reactivity, with respect to analogous linear polymers, as well as differences in solution- and solid-state behavior.

Isotope Effect in the Activation of a Mechanophore

In mechanochemistry, molecules under tension can react in unexpected ways. The reactivity of mechanophores (mechanosensitive molecules) can be controlled using various geometric or electronic factors. Often these factors affect the rate of mechanical activation but sometimes give rise to alternative reaction pathways. Here we show that a simple isotope substitution (H to D) leads to a reversal of selectivity in the activation of a mechanophore. Remarkably this isotope effect is not kinetic in nature but emerges from dynamic effects in which deuteration reduces the ability of the reactant to follow a post-transition-state concerted trajectory on the bifurcated force-modified potential energy surface. These results give a new insight into the reactivity of molecules under tension.

The many flavours of mechanochemistry and its plausible conceptual underpinnings

Mechanochemistry describes diverse phenomena in which mechanical load affects chemical reactivity. The fuzziness of this definition means that it includes processes as seemingly disparate as motor protein function, organic synthesis in a ball mill, reactions at a propagating crack, chemical actuation, and polymer fragmentation in fast solvent flows and in mastication. In chemistry, the rate of a reaction in a flask does not depend on how fast the flask moves in space. In mechanochemistry, the rate at which a material is deformed affects which and how many bonds break. In other words, in some manifestations of mechanochemistry, macroscopic motion powers otherwise endergonic reactions. In others, spontaneous chemical reactions drive mechanical motion. Neither requires thermal or electrostatic gradients. Distinct manifestations of mechanochemistry are conventionally treated as being conceptually independent, which slows the field in its transformation from being a collection of observations to a rigorous discipline. In this Review, we highlight observations suggesting that the unifying feature of mechanochemical phenomena may be the coupling between inertial motion at the microscale to macroscale and changes in chemical bonding enabled by transient build-up and relaxation of strains, from macroscopic to molecular. This dynamic coupling across multiple length scales and timescales also greatly complicates the conceptual understanding of mechanochemistry.

Mechanochemical tools for polymer materials

This review aims to provide a field guide for the implementation of mechanochemistry in synthetic polymers by summarizing the molecules, materials, and methods that have been developed in this field.

Stress-responsive properties of metallocenes in metallopolymers

This review article combines the field of metallopolymers and stress-responsiveness on a molecular level, namely, metallocenes, as emerging stress-responsive building blocks for materials.

A Mechanochemical Reaction Cascade for Controlling Load-Strengthening of a Mechanochromic Polymer

We demonstrate an intermolecular reaction cascade to control the force which triggers crosslinking of a mechanochromic polymer of spirothiopyran (STP). Mechanochromism arises from rapid reversible force-sensitive isomerization of STP to a merocyanine, which reacts rapidly with activated C=C bonds. The concentration of such bonds, and hence the crosslinking rate, is controlled by force-dependent dissociation of a Diels-Alder adduct of anthracene and maleimide. Because the adduct requires ca. 1 nN higher force to dissociate at the same rate as that of STP isomerization, the cascade limits crosslinking to overstressed regions of the material, which are at the highest rate of material damage. Using comb polymers decreased the minimum concentration of mechanophores required to crosslinking by about 100-fold compared to previous examples of load-strengthening materials. The approach described has potential for controlling a broad range of reaction sequences triggered by mechanical load.

Polymer mechanochemistry-enabled pericyclic reactions

Polymer mechanochemical pericyclic reactions are reviewed with regard to their structural features and substitution prerequisites to the polymer framework.