Frozen in Time: Kinetically Stabilized Amorphous Solid Dispersions of Nifedipine Stable after a Quarter Century of Storage

Extended siponimod release via low-porosity PLGA fibres: a comprehensive three-month in vitro evaluation for neovascular ocular diseases

Neovascular ocular diseases are among the most common causes of preventable or treatable vision loss. Their management involves lifelong, intravitreal injections of anti-vascular endothelial growth factor (VEGF) therapeutics to inhibit neovascularization, the key pathological step in these diseases. Anti-VEGF products approved for ocular administration are expensive biological agents with limited stability and short half-life. Additionally, their therapeutic advantages are hindered by high treatment resistance, poor patient compliance and the need for frequent, invasive administration. Herein, we used electrospinning to develop a unique, non-porous, PLGA implant for the ocular delivery of siponimod to improve ocular neovascular disease management. Siponimod is an FDA-approved drug for multiple sclerosis with a novel indication as a potential ocular angiogenesis inhibitor. The electrospinning conditions were optimised to produce a microfibrous, PLGA matte that was cut and rolled into the desired implant size. Physical characterisation techniques (Raman, PXRD, DSC and FTIR) indicated siponimod was distributed uniformly within the electrospun fibres as a stabilised, amorphous, solid dispersion with a character modifying drug-polymer interaction. Siponimod dispersion and drug-polymer interactions contributed to the formation of smooth fibres, with reduced porous structures. The apparent reduced porosity, coupled with the drug's hydrophobic dispersion, afforded resistance to water penetration. This led to a slow, controlled, Higuchi-type drug diffusion, with ∼30% of the siponimod load released over 90 days. The released drug inhibited human retinal microvascular endothelial cell migration and did not affect the cells' metabolic activity at different time points. The electrospun implant was physically stable after incubation under stress conditions for three months. This novel siponimod intravitreal implant broadens the therapeutic possibilities for neovascular ocular diseases, representing a potential alternative to biological, anti-VEGF treatments due to lower financial and stability burdens. Additionally, siponimod interaction with PLGA provides a unique opportunity to sustain the drug release from the electrospun fibres, thereby reducing the frequency of intravitreal injection and improving patient adherence.

Cocrystal Prediction of Nifedipine Based on the Graph Neural Network and Molecular Electrostatic Potential Surface

Nifedipine (NIF) is a dihydropyridine calcium channel blocker primarily used to treat conditions such as hypertension and angina. However, its low solubility and low bioavailability limit its effectiveness in clinical practice. Here, we developed a cocrystal prediction model based on Graph Neural Networks (CocrystalGNN) for the screening of cocrystals with NIF. And scoring 50 coformers using CocrystalGNN. To validate the reliability of the model, we used another prediction method, Molecular Electrostatic Potential Surface (MEPS), to verify the prediction results. Subsequently, we performed a second validation using experiments. The results indicate that our model achieved high performance. Ultimately, cocrystals of NIF were successfully obtained and all cocrystals exhibited better solubility and dissolution characteristics compared to the parent drug. This study lays a solid foundation for combining virtual prediction with experimental screening to discover novel water-insoluble drug cocrystals.

Strategies to improve the stability of amorphous solid dispersions in view of the hot melt extrusion (HME) method

Oral administration of drugs is preferred over other routes for several reasons: it is non-invasive, easy to administer, and easy to store. However, drug formulation for oral administration is often hindered by the drug's poor solubility, which limits its bioavailability and reduces its commercial value. As a solution, amorphous solid dispersion (ASD) was introduced as a drug formulation method that improves drug solubility by changing the molecular structure of the drugs from crystalline to amorphous. The hot melt extrusion (HME) method is emerging in the pharmaceutical industry as an alternative to manufacture ASD. However, despite solving solubility issues, ASD also exposes the drug to a high risk of crystallisation, either during processing or storage. Formulating a successful oral administration drug using ASD requires optimisation of the formulation, polymers, and HME manufacturing processes applied. This review presents some important considerations in ASD formulation, including strategies to improve the stability of the final product using HME to allow more new drugs to be formulated using this method.

Crystallinity: A Complex Critical Quality Attribute of Amorphous Solid Dispersions

Does the performance of an amorphous solid dispersion rely on having 100% amorphous content? What specifications are appropriate for crystalline content within an amorphous solid dispersion (ASD) drug product? In this Perspective, the origin and significance of crystallinity within amorphous solid dispersions will be considered. Crystallinity can be found within an ASD from one of two pathways: (1) incomplete amorphization, or (2) crystal creation (nucleation and crystal growth). While nucleation and crystal growth is the more commonly considered pathway, where crystals originate as a physical stability failure upon accelerated or prolonged storage, manufacturing-based origins of crystallinity are possible as well. Detecting trace levels of crystallinity is a significant analytical challenge, and orthogonal methods should be employed to develop a holistic assessment of sample properties. Probing the impact of crystallinity on release performance which may translate to meaningful clinical significance is inherently challenging, requiring optimization of dissolution test variables to address the complexity of ASD formulations, in terms of drug physicochemical properties (e.g., crystallization tendency), level of crystallinity, crystal reference material selection, and formulation characteristics. The complexity of risk presented by crystallinity to product performance will be illuminated through several case studies, highlighting that a one-size-fits-all approach cannot be used to set specification limits, as the risk of crystallinity can vary widely based on a multitude of factors. Risk assessment considerations surrounding drug physicochemical properties, formulation fundamentals, physical stability, dissolution, and crystal micromeritic properties will be discussed.

Hot-Melt Extrusion as an Effective Technique for Obtaining an Amorphous System of Curcumin and Piperine with Improved Properties Essential for Their Better Biological Activities

Poor bioavailability hampers the use of curcumin and piperine as biologically active agents. It can be improved by enhancing the solubility as well as by using bioenhancers to inhibit metabolic transformation processes. Obtaining an amorphous system of curcumin and piperine can lead to the overcoming of these limitations. Hot-melt extrusion successfully produced their amorphous systems, as shown by XRPD and DSC analyses. Additionally, the presence of intermolecular interactions between the components of the systems was investigated using the FT-IR/ATR technique. The systems were able to produce a supersaturation state as well as improve the apparent solubilities of curcumin and piperine by 9496- and 161-fold, respectively. The permeabilities of curcumin in the GIT and BBB PAMPA models increased by 12578- and 3069-fold, respectively, whereas piperine's were raised by 343- and 164-fold, respectively. Improved solubility had a positive effect on both antioxidant and anti-butyrylcholinesterase activities. The best system suppressed 96.97 ± 1.32% of DPPH radicals, and butyrylcholinesterase activity was inhibited by 98.52 ± 0.87%. In conclusion, amorphization remarkably increased the dissolution rate, apparent solubility, permeability, and biological activities of curcumin and piperine.

Impact of Crystal Nuclei on Dissolution of Amorphous Drugs

Amorphous drugs are used to improve bioavailability of poorly water-soluble drugs. Crystallization must be managed to take full advantage of this formulation strategy. Crystallization of amorphous drugs proceeds in a sequence of crystal nucleation and growth, with different kinetics. At low temperatures, crystal nucleation is fast, but crystal growth is slow. Therefore, amorphous drugs may generate dense but nanoscale crystal nuclei. Such tiny nuclei cannot be detected using routine powder X-ray diffraction (PXRD) and polarized light microscopy (PLM). However, they may negate the dissolution advantage of amorphous drugs. In this work, for the first time, the impact of crystal nuclei on dissolution of amorphous drugs was studied by monitoring the real-time dissolution from amorphous drug films, with and without crystal nuclei, and the evolving crystallinity in the films. Three model drugs (ritonavir/RTV, posaconazole/POS, and nifedipine/NIF) were chosen to represent different crystallization tendencies in the supercooled liquid state, namely, slow-nucleation-and-slow-growth (SN-SG), fast-nucleation-and-slow-growth (FN-SG), and fast-nucleation-and-fast-growth (FN-FG), respectively. We find that although the amorphous films containing nuclei do not show obvious differences from the nuclei-free films under PLM and PXRD before dissolution, they have inferior dissolution performance relative to the nuclei-free amorphous films. For SN-SG drug RTV, crystal nuclei have negligible impact on the crystallization of amorphous films, dissolution rate, and supersaturation achieved. However, they cause earlier de-supersaturation by inducing crystallization in solution as heterogeneous seeds. For FN-SG drug POS and FN-FG drug NIF, crystal nuclei accelerate crystallization in the amorphous films leading to lower supersaturation achieved with POS, and elimination of any supersaturation with NIF. Dissolution profiles of amorphous films can be further analyzed using a derivative function of the apparent dissolution rate, which yields amorphous solubility, initial intrinsic dissolution rate, and onset of crystallization in the amorphous films. This study highlights that although crystal nuclei are undetectable with routine analytical methods, they can significantly negate, or even eliminate, the dissolution advantage of amorphous drugs. Hence, understanding crystal nucleation process and developing approaches to prevent it are necessary to fully realize the benefits of amorphous solids.

Atomic Layer Coating to Inhibit Surface Crystallization of Amorphous Pharmaceutical Powders

Preventing crystallization is a primary concern when developing amorphous drug formulations. Recently, atomic layer coatings (ALCs) of aluminum oxide demonstrated crystallization inhibition of high drug loading amorphous solid dispersions (ASDs) for over 2 years. The goal of the current study was to probe the breadth and mechanisms of this exciting finding through multiple drug/polymer model systems, as well as particle and coating attributes. The model ASD systems selected provide for a range of hygroscopicity and chemical functional groups, which may contribute to the crystallization inhibition effect of the ALC coatings. Atomic layer coating was performed to apply a 5-25 nm layer of aluminum oxide or zinc oxide onto ASD particles, which imparted enhanced micromeritic properties, namely, reduced agglomeration and improved powder flowability. ASD particles were stored at 40 °C and a selected relative humidity level between 31 and 75%. Crystallization was monitored by X-ray powder diffraction and scanning electron microscopy (SEM) up to 48 weeks. Crystallization was observable by SEM within 1-2 weeks for all uncoated samples. After ALC, crystallization was effectively delayed or completely inhibited in some systems up to 48 weeks. The delay achieved was demonstrated regardless of polymer hygroscopicity, presence or absence of hydroxyl functional groups in drugs and/or polymers, particle size, or coating properties. The crystallization inhibition effect is attributed primarily to decreased surface molecular mobility. ALC has the potential to be a scalable strategy to enhance the physical stability of ASD systems to enable high drug loading and enhanced robustness to temperature or relative humidity excursions.

How Does Long-Term Storage Influence the Physical Stability and Dissolution of Bicalutamide from Solid Dispersions and Minitablets?

The stability of amorphous drugs is among the main challenges in the development of solid dosage forms. This paper examines the effect of storage conditions (25 °C/60% RH and 40 °C/75% RH) and different packaging materials, i.e., polystyrene containers and PVC/Al blisters, on the crystallinity and dissolution characteristics of solid dispersions containing bicalutamide and polyvinylpyrrolidone. The results confirmed drug amorphization upon milling and improved dissolution resulting from the lack of a crystal lattice. These properties varied with time regarding sample composition, storage conditions, and packaging material. The most resistant to storage conditions was the 1:1 solid dispersion packed into blisters. Based on the obtained results, the 1:1 solid dispersion was formulated into minitablets, which were then tested after tableting and then packed into PVC/Al blisters and stored for six months in the same conditions as solid dispersions. We proved that efficient stabilization of amorphous bicalutamide depends on the barrier properties of packaging materials and that a properly chosen material protected the drug substance from the influence of unfavorable storage conditions such as elevated temperature and humidity.

A Hot-Melt Extrusion Risk Assessment Classification System for Amorphous Solid Dispersion Formulation Development

Several literature publications have described the potential application of active pharmaceutical ingredient (API)–polymer phase diagrams to identify appropriate temperature ranges for processing amorphous solid dispersion (ASD) formulations via the hot-melt extrusion (HME) technique. However, systematic investigations and reliable applications of the phase diagram as a risk assessment tool for HME are non-existent. Accordingly, within AbbVie, an HME risk classification system (HCS) based on API–polymer phase diagrams has been developed as a material-sparing tool for the early risk assessment of especially high melting temperature APIs, which are typically considered unsuitable for HME. The essence of the HCS is to provide an API risk categorization framework for the development of ASDs via the HME process. The proposed classification system is based on the recognition that the manufacture of crystal-free ASD using the HME process fundamentally depends on the ability of the melt temperature to reach the API’s thermodynamic solubility temperature or above. Furthermore, we explored the API–polymer phase diagram as a simple tool for process design space selection pertaining to API or polymer thermal degradation regions and glass transition temperature-related dissolution kinetics limitations. Application of the HCS was demonstrated via HME experiments with two high melting temperature APIs, sulfamerazine and telmisartan, with the polymers Copovidone and Soluplus. Analysis of the resulting ASDs in terms of the residual crystallinity and degradation showed excellent agreement with the preassigned HCS class. Within AbbVie, the HCS concept has been successfully applied to more than 60 different APIs over the last 8 years as a robust validated risk assessment and quality-by-design (QbD) tool for the development of HME ASDs.

Selective Laser Sintering of a Photosensitive Drug: Impact of Processing and Formulation Parameters on Degradation, Solid State, and Quality of 3D-Printed Dosage Forms

This research study utilized a light-sensitive drug, nifedipine (NFD), to understand the impact of processing parameters and formulation composition on drug degradation, crystallinity, and quality attributes (dimensions, hardness, disintegration time) of selective laser sintering (SLS)-based three-dimensional (3D)-printed dosage forms. Visible lasers with a wavelength around 455 nm are one of the laser sources used for selective laser sintering (SLS) processes, and some drugs such as nifedipine tend to absorb radiation at varying intensities around this wavelength. This phenomenon may lead to chemical degradation and solid-state transformation, which was assessed for nifedipine in formulations with varying amounts of vinyl pyrrolidone-vinyl acetate copolymer (Kollidon VA 64) and potassium aluminum silicate-based pearlescent pigment (Candurin) processed under different SLS conditions in the presented work. After preliminary screening, Candurin, surface temperature (ST), and laser speed (LS) were identified as the significant independent variables. Further, using the identified independent variables, a 17-run, randomized, Box-Behnken design was developed to understand the correlation trends and quantify the impact on degradation (%), crystallinity, and quality attributes (dimensions, hardness, disintegration time) employing qualitative and quantitative analytical tools. The design of experiments (DoEs) and statistical analysis observed that LS and Candurin (wt %) had a strong negative correlation on drug degradation, hardness, and weight, whereas ST had a strong positive correlation with drug degradation, amorphous conversion, and hardness of the 3D-printed dosage form. From this study, it can be concluded that formulation and processing parameters have a critical impact on stability and performance; hence, these parameters should be evaluated and optimized before exposing light-sensitive drugs to the SLS processes.

Balancing Solid-State Stability and Dissolution Performance of Lumefantrine Amorphous Solid Dispersions: The Role of Polymer Choice and Drug-Polymer Interactions

Amorphous solid dispersions (ASDs) are of great interest due to their ability to enhance the delivery of poorly soluble drugs. Recent studies have shown that, in addition to acting as a crystallization inhibitor, the polymer in an ASD plays a role in controlling the rate of drug release, notably in congruently releasing formulations, where both the drug and polymer have similar normalized release rates. The aim of this study was to compare the solid-state stability and release performance of ASDs when formulated with neutral and enteric polymers. One neutral (polyvinylpyrrolidone-vinyl acetate copolymer, PVPVA) and four enteric polymers (hypromellose acetate succinate; hypromellose phthalate; cellulose acetate phthalate, CAP; methacrylic acid-methyl methacrylate copolymer, Eudragit L 100) were used to formulate binary ASDs with lumefantrine, a hydrophobic and weakly basic antimalarial drug. The normalized drug and polymer release rates of lumefantrine-PVPVA ASDs up to 35% drug loading (DL) were similar and rapid. No drug release from PVPVA systems was detected when the DL was increased to 40%. In contrast, ASDs formulated with enteric polymers showed a DL-dependent decrease in the release rates of both the drug and polymer, whereby release was slower than for PVPVA ASDs for DLs < 40% DL. Drug release from CAP and Eudragit L 100 systems was the slowest and drug amorphous solubility was not achieved even at 5% DL. Although lumefantrine-PVPVA ASDs showed fast release, they also showed rapid drug crystallization under accelerated stability conditions, while the ASDs with enteric polymers showed much greater resistance to crystallization. This study highlights the importance of polymer selection in the formulation of ASDs, where a balance between physical stability and dissolution release must be achieved.

What Are the Important Factors That Influence API Crystallization in Miscible Amorphous API-Excipient Mixtures during Long-Term Storage in the Glassy State?

In this Perspective, the authors examine the various factors that should be considered when attempting to use miscible amorphous API-excipient mixtures (amorphous solid dispersions and coamorphous systems) to prevent the solid-state crystallization of API molecules when isothermally stored for long periods of time (a year or more) in the glassy state. After presenting an overview of a variety of studies designed to obtain a better understanding of possible mechanisms by which amorphous API undergo physical instability and by which excipients generally appear to inhibit API crystallization from the amorphous state, we examined 78 studies that reported acceptable physical stability of such systems, stored below T_g under "dry" conditions for one year or more. These results were examined more closely in terms of two major contributing factors: the degree to which a reduction in diffusional molecular mobility and API-excipient molecular interactions operates to inhibit crystallization. These two parameters were chosen because the data are readily available in early development to help compare amorphous systems. Since T_g - T = 50 K is often used as a rule of thumb for the establishing the minimum value below T_g required to reduce diffusional mobility to a period of years, it was interesting to observe that 30 of the 78 studies still produced significant physical stability at values of T_g - T < 50 K (3-47 °C), suggesting that factors besides diffusive molecular mobility likely contribute. A closer look at the T_g - T < 50 systems shows that hydrogen bonding, proton transfer, disruption of API-API self-associations (such as dimers), and possible π-π stacking were reported for most of the systems. In contrast, five crystallized systems that were monitored for a year or more were also examined. These systems exhibited T_g - T values of 9-79, with three of them exhibiting T_g - T < 50. For these three samples, none displayed molecular interactions by infrared spectroscopy. A discussion on the impact of relative humidity on long-term crystallization in the glass was included, with attention paid to the relative water vapor sorption by various excipients and effects on diffusive mobility and molecular interactions between API and excipient.

Crystallization Risk Assessment of Amorphous Solid Dispersions by Physical Shelf-Life Modeling: A Practical Approach

Amorphous solid dispersions (ASDs) of a poorly water-soluble active pharmaceutical ingredient (API) in a polymer matrix can enhance the water solubility and therefore generally improve the bioavailability of the API. Although examples of long-term stability are emerging in the literature, many ASD products are kinetically stabilized, and inhibition of crystallization of a drug substance within and beyond shelf life is still a matter of debate, since, in some cases, the formation of crystals may impact bioavailability. In this study, a risk assessment of API crystallization in packaged ASD drug products and a mitigation strategy are outlined. The risk of shelf-life crystallization and the respective mitigation steps are assigned for different drug product development scenarios and the scientific principles of each step are discussed. Ultimately, the physical stability of ASD drug products during shelf-life storage is modeled. The methodology is based on the quantification of crystal growth kinetics by transmission Raman spectroscopy (TRS), modeling the impact of water sorption on the glass-transition temperature of the ASD, and the prediction of moisture uptake by the packaged ASD drug product during storage. This approach is applied to an ASD of fenofibrate that features both fast API crystallization under accelerated storage conditions and long-term stability in a suitable protective packaging under conventional storage conditions.

Co-Amorphous Drug Formulations in Numbers: Recent Advances in Co-Amorphous Drug Formulations with Focus on Co-Formability, Molar Ratio, Preparation Methods, Physical Stability, In Vitro and In Vivo Performance, and New Formulation Strategies

Co-amorphous drug delivery systems (CAMS) are characterized by the combination of two or more (initially crystalline) low molecular weight components that form a homogeneous single-phase amorphous system. Over the past decades, CAMS have been widely investigated as a promising approach to address the challenge of low water solubility of many active pharmaceutical ingredients. Most of the studies on CAMS were performed on a case-by-case basis, and only a few systematic studies are available. A quantitative analysis of the literature on CAMS under certain aspects highlights not only which aspects have been of great interest, but also which future developments are necessary to expand this research field. This review provides a comprehensive updated overview on the current published work on CAMS using a quantitative approach, focusing on three critical quality attributes of CAMS, i.e., co-formability, physical stability, and dissolution performance. Specifically, co-formability, molar ratio of drug and co-former, preparation methods, physical stability, and in vitro and in vivo performance were covered. For each aspect, a quantitative assessment on the current status was performed, allowing both recent advances and remaining research gaps to be identified. Furthermore, novel research aspects such as the design of ternary CAMS are discussed.

Hot-Melt Extruded Amorphous Solid Dispersion for Solubility, Stability, and Bioavailability Enhancement of Telmisartan

Telmisartan (TEL, an antihypertensive drug) belongs to Class II of the Biopharmaceutical Classification System (BCS) because of its poor aqueous solubility. In this study, we enhanced the solubility, bioavailability, and stability of TEL through the fabrication of TEL-loaded pH-modulated solid dispersion (TEL pH_M-SD) using hot-melt extrusion (HME) technology. We prepared different TEL pH_M-SD formulations by varying the ratio of the drug (TEL, 10-60% w/w), the hydrophilic polymer (Soluplus^®, 30-90% w/w), and pH-modifier (sodium carbonate, 0-10% w/w). More so, the tablets prepared from an optimized formulation (F8) showed a strikingly improved in vitro dissolution profile (~30-fold) compared to the free drug tablets. The conversion of crystalline TEL to its amorphous state is observed through solid-state characterizations. During the stability study, F8 tablets had a better stability profile compared to the commercial product with F8, showing higher drug content, low moisture content, and negligible physical changes. Moreover, compared to the TEL powder, in vivo pharmacokinetic studies in rats showed superior pharmacokinetic parameters, with maximum serum concentration (C_max) and area under the drug concentration-time curve (AUC₀-_∞) of the TEL pH_M-SD formulation increasing by 6.61- and 5.37-fold, respectively. Collectively, the results from the current study showed that the inclusion of a hydrophilic polymer, pH modulator, and the amorphization of crystalline drugs in solid dispersion prepared by HME can be an effective strategy to improve the solubility and bioavailability of hydrophobic drugs without compromising the drug's physical stability.

The role of surface energy heterogeneity on crystal morphology during solid-state crystallization at the amorphous atazanavir–water interface

Solid-state crystallization at the amorphous atazanavir/water interface was studied via a lattice Monte Carlo model and atomic force microscopy.

Stable amorphous solid dispersions of fenofibrate using hot melt extrusion technology: Effect of formulation and process parameters for a low glass transition temperature drug

Development of stable amorphous solid dispersions (ASDs) for a low glass transition temperature (Tg) drug is a challenging task. The physico-chemical properties of the drug and excipients play a critical role in developing stable ASDs. In this study, ASDs of poorly soluble fenofibrate, a drug with a low Tg, were formulated using hydroxy propyl methylcellulose acetate succinate (HPMCAS) via hot melt extrusion (HME). The feasible processing conditions were established at varying drug loads and processing temperatures. The prepared ASDs were characterized for crystallinity using differential scanning calorimetry (DSC) and powder X-ray diffraction (PXRD). Fourier transform-infrared spectroscopy was performed to study the potential interactions. DSC and PXRD studies confirmed the amorphous state of fenofibrate in the prepared ASDs. A discriminative in vitro dissolution method was established to study the impact of HPMCAS grades on dissolution profile. The dissolution parameters such as dissolution efficiency, initial dissolution rate and mean dissolution rate, suggested improved dissolution characteristics compared to pure fenofibrate. Accelerated stability studies at 40 °C/75% RH showed preservation of the amorphous nature of fenofibrate in formulations with 15% drug load and in vitro drug release studies indicated similar release profiles (f2 >50). This study provides an insight into the formulation and processing of ASDs for poorly soluble drugs with low Tg.

Use of Terahertz-Raman Spectroscopy to Determine Solubility of the Crystalline Active Pharmaceutical Ingredient in Polymeric Matrices during Hot Melt Extrusion

Polymer-based amorphous solid dispersions (ASDs) comprise one of the most promising formulation strategies devised to improve the oral bioavailability of poorly water-soluble drugs. Exploitation of such systems in marketed products has been limited because of poor understanding of physical stability. The internal disordered structure and increased free energy provide a thermodynamic driving force for phase separation and recrystallization, which can compromise therapeutic efficacy and limit product shelf life. A primary concern in the development of stable ASDs is the solubility of the drug in the polymeric carrier, but there is a scarcity of reliable analytical techniques for its determination. In this work, terahertz (THz) Raman spectroscopy was introduced as a novel empirical approach to determine the saturated solubility of crystalline active pharmaceutical ingredient (API) in polymeric matrices directly during hot melt extrusion. The solubility of a model compound, paracetamol, in two polymer systems, Affinisol 15LV (HPMC) and Plasdone S630 (copovidone), was determined by monitoring the API structural phase transitions from crystalline to amorphous as an excess of crystalline drug dissolved in the polymeric matrix. THz-Raman results enabled construction of solubility phase diagrams and highlighted significant differences in the solubilization capacity of the two polymer systems. The maximum stable API-load was 20 wt % for Affinisol 15LV and 40 wt % for Plasdone S630. Differential scanning calorimetry and XRPD studies corroborated these results. This approach has demonstrated a novel capability to provide real-time API-polymer phase equilibria data in a manufacturing relevant environment and promising potential to predict solid-state solubility and physical stability of ASDs.

Inhibiting or Accelerating Crystallization of Pharmaceuticals by Manipulating Polymer Solubility

Polymers play a central role in controlling the crystallization of pharmaceuticals with effects as divergent as amorphous form stabilization and the acceleration of crystallization. Here, using pyrazinamide and hydrochlorothiazide as model pharmaceuticals, it is demonstrated that the same functional group interactions are responsible for these opposing behaviors and that whether a polymer speeds or slows a crystallization can be controlled by polymer solubility. This concept is applied for the discovery of polymers to maintain drug supersaturation in solution: the strength of functional group interactions between drug and polymer is assessed through polymer-induced heteronucleation, and soluble polymers containing the strongest-interacting functional groups with drug are shown to succeed as precipitation inhibitors.

β-Carotene solid dispersion prepared by hot-melt technology improves its solubility in water

β-Carotene is a member of the carotenoid family and is a red-orange pigment abundantly present in many vegetables and fruits. As an antioxidant, it eliminates excessive reactive oxygen species generated in the body. Accordingly, it has potential to be used in the pharmaceutical, food, and cosmetic industries. β-Carotene has a very low water solubility and low bioavailability; thus, there is a need to develop techniques to overcome these issues. In this study, we aimed to enhance the water solubility of β-carotene by using hot-melt technology, a type of solid dispersions technology. When preparing β-carotene solid dispersion using this method, suitable conditions for the emulsifiers and mixing ratios were investigated using water solubility as an index. Setting the weight ratio of β-carotene:polyvinylpyrrolidone:sucrose fatty acid ester to 10%:70%:20% resulted in the poorly-water soluble β-carotene showing improved water solubility (120 μg/mL). The physicochemical properties of the optimized β-carotene solid dispersion were analyzed using field emission scanning electron microscopy, differential scanning calorimetry, and powder X-ray diffraction. The solid dispersion was found to have an amorphous structure. The improved solubility observed for β-carotene in the solid dispersions developed in this work may make these dispersions useful as additives in foods or in nutraceutical formulations.

Role of hydrogen bonding in cocrystals and coamorphous solids: indapamide as a case study

Crystalline and amorphous stable binary compounds of indapamide for high solubility and permeability.

Dual mechanism of microenvironmental pH modulation and foam melt extrusion to enhance performance of HPMCAS based amorphous solid dispersion

Hydroxypropyl methylcellulose acetate succinate (HPMCAS) is an excellent polymeric carrier for melt extrusion amorphous solid dispersion. However, its pH-dependent solubility limits its application, especially for narrow absorption window drugs. The current study proposed a novel dual approach of foam extrusion and microenvironmental pH modulation to overcome this limitation. Sodium bicarbonate was used as a blowing agent and the remaining sodium carbonate acted as an internal pH modifier. Compared with conventional extrusion, foam extrusion dramatically lowered the extrudate physical strength (breaking force and hardness decreased by 20-fold; breaking energy and deformation energy decreased by >30-fold). Milling efficiency of foam extrudate was largely improved compared with that of conventional extrudates, demonstrating smaller particle size, larger specific surface area, and ability to pass through a smaller milling screen. The foam extrudate could generate a supersaturation concentration up to 8-fold higher than the solubility of the pure drug. It also significantly enhanced drug dissolution in a two-step biorelevant medium (p < 0.05). This novel approach improved both manufacturing processability and dissolution of HPMCAS-based solid dispersions.

Development and Performance of a Highly Sensitive Model Formulation Based on Torasemide to Enhance Hot-Melt Extrusion Process Understanding and Process Development

The aim of this work was to investigate the use of torasemide as a highly sensitive indicator substance and to develop a formulation thereof for establishing quantitative relationships between hot-melt extrusion process conditions and critical quality attributes (CQAs). Using solid-state characterization techniques and a 10 mm lab-scale co-rotating twin-screw extruder, we studied torasemide in a Soluplus® (SOL)-polyethylene glycol 1500 (PEG 1500) matrix, and developed and characterized a formulation which was used as a process indicator to study thermal- and hydrolysis-induced degradation, as well as residual crystallinity. We found that torasemide first dissolved into the matrix and then degraded. Based on this mechanism, extrudates with measurable levels of degradation and residual crystallinity were produced, depending strongly on the main barrel and die temperature and residence time applied. In addition, we found that 10% w/w PEG 1500 as plasticizer resulted in the widest operating space with the widest range of measurable residual crystallinity and degradant levels. Torasemide as an indicator substance behaves like a challenging-to-process API, only with higher sensitivity and more pronounced effects, e.g., degradation and residual crystallinity. Application of a model formulation containing torasemide will enhance the understanding of the dynamic environment inside an extruder and elucidate the cumulative thermal and hydrolysis effects of the extrusion process. The use of such a formulation will also facilitate rational process development and scaling by establishing clear links between process conditions and CQAs.

Investigation of Drug-Excipient Interactions in Biclotymol Amorphous Solid Dispersions

The effect of low molecular weight excipients on drug-excipient interactions, molecular mobility, and propensity to recrystallization of an amorphous active pharmaceutical ingredient is investigated. Two structurally related excipients (α-pentaacetylglucose and β-pentaacetylglucose), five different drug:excipient ratios (1:5, 1:2, 1:1, 2:1, and 5:1, w/w), and three different solid state characterization tools (differential scanning calorimetry, X-ray powder diffraction, and dielectric relaxation spectroscopy) were selected for the present research. Our investigation has shown that the excipient concentration and its molecular structure reveal quasi-identical molecular dynamic behavior of solid dispersions above and below the glass transition temperature. Across to complementary quantum mechanical simulations, we point out a clear indication of a strong interaction between biclotymol and the acetylated saccharides. Moreover, the thermodynamic study on these amorphous solid dispersions highlighted a stabilizing effect of α-pentaacetylglucose regardless of its quantity while an excessive concentration of β-pentaacetylglucose revealed a poor crystallization inhibition. Finally, through long-term stability studies, we also showed the limiting excipient concentration needed to stabilize our amorphous API. Herewith, the developed procedure in this paper appears to be a promising tool for solid-state characterization of complex pharmaceutical formulations.

Gelatin Nano-coating for Inhibiting Surface Crystallization of Amorphous Drugs

PURPOSE

Inhibit the fast surface crystallization of amorphous drugs with gelatin nano-coatings.

METHODS

The free surface of amorphous films of indomethacin or nifedipine was coated by a gelatin solution (type A or B) and dried. The coating's effect on surface crystallization was evaluated. Coating thickness was estimated from mass change after coating.

RESULTS

For indomethacin (weak acid, pK_a = 4.5), a gelatin coating of either type deposited at pH 5 and 10 inhibited its fast surface crystal growth. The coating thickness was 20 ± 10 nm. A gelatin coating deposited at pH 3, however, provided no protective effect. These results suggest that an effective gelatin coating does not require that the drug and the polymer have opposite charges. The ineffective pH 3 coating might reflect the poor wetting of indomethacin's neutral, hydrophobic surface by the coating solution. For nifedipine (weak base, pK_a = 2.6), a gelatin coating of either type deposited at pH 5 inhibited its fast surface crystal growth.

CONCLUSIONS

Gelatin nano-coatings can be conveniently applied to amorphous drugs from solution to inhibit fast surface crystallization. Unlike strong polyelectrolyte coatings, a protective gelatin coating does not require strict pairing of opposite charges. This could make gelatin coating a versatile, pharmaceutically acceptable coating for stabilizing amorphous drugs.

Influence of Low-Molecular-Weight Excipients on the Phase Behavior of PVPVA64 Amorphous Solid Dispersions

PURPOSE

The oral bioavailability of poorly water-soluble active pharmaceutical ingredients (APIs) can be improved by the preparation of amorphous solid dispersions (ASDs) where the API is dissolved in polymeric excipients. Desired properties of such ASDs like storage stability, dissolution behavior, and processability can be optimized by additional excipients. In this work, the influence of so-called low-molecular-weight excipients (LMWEs) on the phase behavior of ASDs was investigated.

METHOD

Binary ASDs of an amorphous API, naproxen (NAP) or acetaminophen (APAP), embedded in poly-(vinylpyrrolidone-co-vinyl acetate) (PVPVA64) were chosen as reference systems. Polyethylene glycol 1500 (PEG1500), D-α-tocopherol polyethylene glycol 1000 succinate (TPGS1000), propylene glycol monocaprylate type II (Capryol™ 90), and propylene glycol monolaurate type I (Lauroglycol™ FCC) were used as LMWEs. The API solubility in the excipients and the glass-transition temperature of the ASDs were modeled using the Perturbed-Chain Statistical Associating Fluid Theory (PC-SAFT) and the Kwei equation, respectively, and compared to corresponding experimental data.

RESULTS

The API solubility curves in ternary systems with 90/10 wt%/wt% PVPVA64/LMWE ratios were very close to those in pure PVPVA64. However, the glass-transition temperatures of API/PVPVA64/LMWE ASDs were much lower than those of API/PVPVA64 ASDs. These effects were determined experimentally and agreed with the predictions using the PC-SAFT and Kwei models.

CONCLUSION

The impact of the LMWEs on the thermodynamic stability of the ASDs is quite small while the kinetic stability is significantly decreased even by small LMWE amounts. PC-SAFT and the Kwei equation are suitable tools for predicting the influence of LMWEs on the ASD phase behavior.

Melt extrusion with poorly soluble drugs - An integrated review

Over the last few decades, hot melt extrusion (HME) has emerged as a successful technology for a broad spectrum of applications in the pharmaceutical industry. As indicated by multiple publications and patents, HME is mainly used for the enhancement of solubility and bioavailability of poorly soluble drugs. This review is focused on the recent reports on the solubility enhancement via HME and provides an update for the manufacturing/scaling up aspects of melt extrusion. In addition, drug characterization methods and dissolution studies are discussed. The application of process analytical technology (PAT) tools and use of HME as a continuous manufacturing process may shorten the drug development process; as a result, the latter is becoming the most widely utilized technique in the pharmaceutical industry. The advantages, disadvantages, and practical applications of various PAT tools such as near and mid-infrared, ultraviolet/visible, fluorescence, and Raman spectroscopies are summarized, and the characteristics of other techniques are briefly discussed. Overall, this review also provides an outline for the currently marketed products and analyzes the strengths, weaknesses, opportunities and threats of HME application in the pharmaceutical industry.

Coamorphous Active Pharmaceutical Ingredient-Small Molecule Mixtures: Considerations in the Choice of Coformers for Enhancing Dissolution and Oral Bioavailability

In the recent years, coamorphous systems, containing an active pharmaceutical ingredient (API) and a small molecule coformer have appeared as alternatives to the use of either amorphous solid dispersions containing polymer or cocrystals of API and small molecule coformers, to improve the dissolution and oral bioavailability of poorly soluble crystalline API. This Commentary article considers the relative properties of amorphous solid dispersions and coamorphous systems in terms of methods of preparation; miscibility; glass transition temperature; physical stability; hygroscopicity; and aqueous dissolution. It also considers important questions concerning the fundamental criteria to be used for the proper selection of a small molecule coformer regarding its ability to form either coamorphous or cocrystal systems. Finally, we consider various aspects of product development that are specifically associated with the formulation of commercial coamorphous systems as solid oral dosage forms. These include coformer selection; screening; methods of preparation; preformulation; physical stability; bioavailability; and final formulation. Through such an analysis of coamorphous API-small molecule coformer systems, against the more widely studied API-polymer dispersions and cocrystals, it is believed that the strengths and weaknesses of coamorphous systems can be better understood, leading to more efficient formulation and manufacture of such systems for enhancing oral bioavailability.