Physical Stabilization of Pharmaceutical Glasses Based on Hydrogen Bond Reorganization under Sub-Tg Temperature

Probing Molecular Packing of Amorphous Pharmaceutical Solids Using X-ray Atomic Pair Distribution Function and Solid-State NMR

The structural investigation of amorphous pharmaceuticals is of paramount importance in comprehending their physicochemical stability. However, it has remained a relatively underexplored realm primarily due to the limited availability of high-resolution analytical tools. In this study, we utilized the combined power of X-ray pair distribution functions (PDFs) and solid-state nuclear magnetic resonance (ssNMR) techniques to probe the molecular packing of amorphous posaconazole and its amorphous solid dispersion at the molecular level. Leveraging synchrotron X-ray PDF data and employing the empirical potential structure refinement (EPSR) methodology, we unraveled the existence of a rigid conformation and discerned short-range intermolecular C-F contacts within amorphous posaconazole. Encouragingly, our ssNMR 19F-13C distance measurements offered corroborative evidence supporting these findings. Furthermore, employing principal component analysis on the X-ray PDF and ssNMR data sets enabled us to gain invaluable insights into the chemical nature of the intermolecular interactions governing the drug-polymer interplay. These outcomes not only furnish crucial structural insights facilitating the comprehension of the underlying mechanisms governing the physicochemical stability but also underscore the efficacy of synergistically harnessing X-ray PDF and ssNMR techniques, complemented by robust modeling strategies, to achieve a high-resolution exploration of amorphous structures.

Rigid Nuclei and Flexible Nuclei: Appearance and Disappearance of Nuclei in Indomethacin Glass Revealed by a Long-Term Annealing Study

In this study, nucleation/crystallization behaviors of indomethacin glass are discussed with emphasis on the fate of nuclei, which is explained using a notion of "rigid" and "flexible" nuclei. The observation was made mainly by thermal analysis of indomethacin glass after long-term annealing at various temperatures. Formation of nuclei was evaluated by observing cold crystallization behaviors of the annealed glasses, as they should be dominated by the "nuclei form" produced in the glass. Nuclei of forms α and γ, which have opposite stability trends, were found to appear over a wide temperature range. The nuclei of form α were stable even in the presence of other crystal forms, whereas those of form γ were likely to be easily integrated into other crystals during their growth, which was explained by a notion of rigid and flexible nuclei. Moreover, unconventionally fast crystallization in the glass-transition region and the finding of a new crystal form are also reported.

Structural Analysis of Molecular Materials Using the Pair Distribution Function

This is a review of atomic pair distribution function (PDF) analysis as applied to the study of molecular materials. The PDF method is a powerful approach to study short- and intermediate-range order in materials on the nanoscale. It may be obtained from total scattering measurements using X-rays, neutrons, or electrons, and it provides structural details when defects, disorder, or structural ambiguities obscure their elucidation directly in reciprocal space. While its uses in the study of inorganic crystals, glasses, and nanomaterials have been recently highlighted, significant progress has also been made in its application to molecular materials such as carbons, pharmaceuticals, polymers, liquids, coordination compounds, composites, and more. Here, an overview of applications toward a wide variety of molecular compounds (organic and inorganic) and systems with molecular components is presented. We then present pedagogical descriptions and tips for further implementation. Successful utilization of the method requires an interdisciplinary consolidation of material preparation, high quality scattering experimentation, data processing, model formulation, and attentive scrutiny of the results. It is hoped that this article will provide a useful reference to practitioners for PDF applications in a wide realm of molecular sciences, and help new practitioners to get started with this technique.

Influence of Annealing in the Close Vicinity of Tg on the Reorganization within Dimers and Its Impact on the Crystallization Kinetics of Gemfibrozil

In this paper, broadband dielectric spectroscopy (BDS) has been applied to study the molecular dynamics and crystallization kinetics of the antihyperlipidemic active pharmaceutical ingredient (API), gemfibrozil (GEM), as well as its deuterated (dGEM) and methylated (metGEM) derivatives, characterized by different types and strengths of intermolecular interactions. Moreover, calorimetric and infrared measurements have been carried out to characterize the thermal properties of examined samples and to probe a change in the H-bonding pattern in GEM, respectively. We found that the dielectric spectra of all examined compounds, collected below the glass transition temperature (T_g), reveal the presence of two secondary relaxations (β, γ). According to the coupling model (CM) predictions, it was assumed that the slower process (β) is of JG type, whereas the faster one (γ) has an intramolecular origin. Interestingly, the extensive crystallization kinetics measurements performed after applying two paths, i.e., the standard procedure (cooling and subsequently heating up to the appropriate temperature, T_c), as well as annealing at two temperatures in the vicinity of T_g and further heating up to T_c, showed that the annealing increases the crystallization rate in the case of native API, while the thermal history of the sample has no significant impact on the pace of this process in the two derivatives of GEM. Analysis of the dielectric strength (Δε) of the α-process during annealing, together with the results of Fourier transform infrared spectroscopy (FTIR) measurements, suggested that the reorganization within dimeric structures formed between the GEM molecules is responsible for the observed behavior. Importantly, our results differ from those obtained by Tominaka et al. (Tominaka, S.; Kawakami, K.; Fukushima, M.; Miyazaki, A.Physical Stabilization of Pharmaceutical Glasses Based on Hydrogen Bond Reorganization under Sub-T_g Temperature Mol. Pharm. 2017 14 264 273 10.1021/acs.molpharmaceut.6b00866.), who demonstrated that the sub-T_g annealing of ritonavir (RTV), which is able to form extensive supramolecular hydrogen bonds, protects this active substance against crystallization. Therefore, based on these contradictory reports, one can hypothesize that materials forming H-bonded structures, characterized by varying architecture, may behave differently after annealing in the vicinity of the glass transition temperature.

Glass engineering of aminotriazine-based materials with sub-ambient Tg and high kinetic stability

Designing molecular glasses with phenyl rings favors a lower T_g and higher glass stability compared to cyclohexyl analogues.

Ultraslow Cooling for the Stabilization of Pharmaceutical Glasses

Stabilization technology of glass structures is of great interest in the field of pharmaceutical science, as it may prevent poorly soluble candidate compounds from dropping out of the pipeline. Cooling rate from the melt has been recognized as one parameter to alter the energy state of the glass; however, the relationship between the physicochemical properties of glass and stabilization efficiency of the cooling rate has not been clarified yet. We have investigated the effect of cooling rate on the thermodynamic parameters of 13 pharmaceutical glasses, to find features of the compounds that are closely related to the stabilization efficiency. We have also analyzed the structural differences between slowly cooled and annealed glasses based on Fourier-transform infrared spectra and relaxation enthalpy. Although the degree of stabilization was lower for slowly cooled glasses compared to that for vapor-deposited ones, slow cooling was found to be a prominent method for producing stable glass and is applicable to bulk materials. In this observation, a strong correlation between fragility and the number of rotatable bonds was also found.

Crystallization Tendency of Pharmaceutical Glasses: Relevance to Compound Properties, Impact of Formulation Process, and Implications for Design of Amorphous Solid Dispersions

Amorphous solid dispersions (ASDs) are important formulation strategies for improving the dissolution process and oral bioavailability of poorly soluble drugs. Physical stability of a candidate drug must be clearly understood to design ASDs with superior properties. The crystallization tendency of small organics is frequently estimated by applying rapid cooling or a cooling/reheating cycle to their melt using differential scanning calorimetry. The crystallization tendency determined in this way does not directly correlate with the physical stability during isothermal storage, which is of great interest to pharmaceutical researchers. Nevertheless, it provides important insights into strategy for the formulation design and the crystallization mechanism of the drug molecules. The initiation time for isothermal crystallization can be explained using the ratio of the glass transition and storage temperatures (T_g/T). Although some formulation processes such as milling and compaction can enhance nucleation, the T_g/T ratio still works for roughly predicting the crystallization behavior. Thus, design of accelerated physical stability test may be possible for ASDs. The crystallization tendency during the formulation process and the supersaturation ability of ASDs may also be related to the crystallization tendency determined by thermal analysis. In this review, the assessment of the crystallization tendency of pharmaceutical glasses and its relevance to developmental studies of ASDs are discussed.

Insights into the Dissolution Mechanism of Ritonavir-Copovidone Amorphous Solid Dispersions: Importance of Congruent Release for Enhanced Performance

The aim of this study was to probe the dissolution mechanisms of amorphous solid dispersions (ASDs) of a poorly water-soluble drug formulated with a hydrophilic polymer. Ritonavir (RTV) and polyvinylpyrrolidone/vinyl acetate (PVPVA) were used as the model drug and polymer, respectively. ASDs with drug loadings (DLs) from 10 to 50 wt % were prepared by solvent evaporation. Surface-normalized dissolution experiments were carried out using Wood's intrinsic dissolution apparatus, and both drug and polymer release were quantified. ASDs at or below 25% DL showed rapid, complete, and congruent (i.e., simultaneous) release of the drug and polymer with dissolution rates similar to that of the polymer alone. The highest drug loading at which congruent release was observed is termed the limit of congruency (LoC) and occurred at 25% DL for RTV-PVPVA. The ASD with 30% DL showed an initial lag time, followed by a period of congruent release. At later times, the release of drug and polymer became incongruent with polymer releasing faster than drug. Higher DL ASDs (40 and 50%) showed slow release of both drug and polymer, whereby the drug release rate was similar to that of the neat amorphous drug. In cases where the release of the ASD components was congruent or close to congruent, the drug concentration exceeded the amorphous solubility, and liquid-liquid phase separation (LLPS) occurred with the formation of colloidal, drug-rich species. Solid state analyses of the ASD tablet surface by infrared spectroscopy and scanning electron microscopy revealed that the partially dissolved tablet surface remains smooth, and drug-polymer miscibility is retained at low DLs; whereas, at a very high DL, the surface is porous and enriched with amorphous drug. In concert, these observations suggest that ASD dissolution and drug release at low DLs is governed primarily by hydrophilic polymer; whereas, at high DLs, amorphous drug controls dissolution. Fluorescence microscopy images of thin ASD films suggested that ASDs at or below the LoC remain homogeneous even after exposure to water. In contrast ASDs with DL above LoC undergo, to various extents, water-induced amorphous-amorphous phase separation (AAPS) leading to demixing of the drug and polymer. Correlating the observations of the dissolution study with the solid state data suggest that the ASDs with DLs higher than the LoC undergo AAPS in the hydrating matrix on the surface of the dissolving solid during dissolution, leading to separation of drug and polymer, the formation of a drug-rich interface, and hence, incongruent and/or slow release of the components. In contrast, low DL ASDs dissolve before AAPS occurs. The competition between these two parallel and competing processes on the surface of ASD solids, i.e., dissolution and AAPS, thus dictates the overall release characteristics of the ASD formulations, which is one of the most important considerations in designing formulations with superior dissolution and absorption.

Zeolitic intralayer microchannels of magadiite, a natural layered silicate, to boost green organic synthesis

Despite the considerable attention given to the applications of magadiite in previous research, the properties of this natural layered silicate have remained mysterious due to the lack of crystal structure information. On the other hand, no one has doubted the intercalation capability between the layers. Here we succeed in determining the structure of magadiite using X-ray pair distribution functions and synchrotron powder diffractometry. We discover unexpected zeolitic microchannels within the layers. We describe efficient synthesis of 100% pure benzoic acid from toluene by using magadiite as an additive in a TiO2 photocatalytic system oxidizing toluene. Based on the uncovered structure of magadiite, we clarify the mechanism of this unique photocatalytic system: the microchannels of magadiite not only separate/accommodate the desired partially oxidized product formed on TiO2 but also prevent the accumulation of the overoxidized products on the TiO2 surface that deactivates the photocatalytic activity.

Time-resolved pair distribution function analysis of disordered materials on beamlines BL04B2 and BL08W at SPring-8

A dedicated apparatus has been developed for studying structural changes in amorphous and disordered crystalline materials substantially in real time. The apparatus, which can be set up on beamlines BL04B2 and BL08W at SPring-8, mainly consists of a large two-dimensional flat-panel detector and high-energy X-rays, enabling total scattering measurements to be carried out for time-resolved pair distribution function (PDF) analysis in the temperature range from room temperature to 873 K at pressures of up to 20 bar. For successful time-resolved analysis, a newly developed program was used that can monitor and process two-dimensional image data simultaneously with the data collection. The use of time-resolved hardware and software is of great importance for obtaining a detailed understanding of the structural changes in disordered materials, as exemplified by the results of commissioned measurements carried out on both beamlines. Benchmark results obtained using amorphous silica and demonstration results for the observation of sulfide glass crystallization upon annealing are introduced.

Lepidocrocite-Type Titanate Formation from Isostructural Prestructures under Hydrothermal Reactions: Observation by Synchrotron X-ray Total Scattering Analyses

The formation of titanium dioxides, such as rutile and anatase, is known to proceed through the formation of a lepidocrocite-type layered structure under hydrothermal conditions, but the nucleation of this intermediate is still not understood well. Here, the nucleation of lepidocrocite-type layered titanates under hydrothermal conditions is observed by tracking the structural changes by in situ time-resolved pair distribution function analyses. We found that titanate clusters or corrugated layered prestructures having <1 nm domains with lepidocrocite-type connectivity were formed even before thermal treatment in alkaline aqueous solution. Upon thermal treatment, a two-dimensional layered structure grew directly from the prestructure, not from the amorphous polymeric hydroxide dissolved in the solution. Thus, we conclude that the formation of the lepidocrocite-like prestructure is the key for forming a layered titanate under hydrothermal conditions.

Curved Fragmented Graphenic Hierarchical Architectures for Extraordinary Charging Capacities

An approach to assemble hierarchically ordered 3D arrangements of curved graphenic nanofragments for energy storage devices is described. Assembling them into well-defined interconnected macroporous networks, followed by removal of the template, results in spherical macroporous, mesoporous, and microporous carbon microball (3MCM) architectures with controllable features spanning nanometer to micrometer length scales. These structures are ideal porous electrodes and can serve as lithium-ion battery (LIB) anodes as well as capacitive deionization (CDI) devices. The LIBs exhibit high reversible capacity (up to 1335 mAh g^-1 ), with great rate capability (248 mAh g^-1 at 20 C) and a long cycle life (60 cycles). For CDI, the curved graphenic networks have superior electrosorption capacity (i.e., 5.17 mg g^-1 in 0.5 × 10^-3 m NaCl) over conventional carbon materials. The performance of these materials is attributed to the hierarchical structure of the graphenic electrode, which enables faster ion diffusion and low transport resistance.

Investigation of Drug-Excipient Interactions in Biclotymol Amorphous Solid Dispersions

The effect of low molecular weight excipients on drug-excipient interactions, molecular mobility, and propensity to recrystallization of an amorphous active pharmaceutical ingredient is investigated. Two structurally related excipients (α-pentaacetylglucose and β-pentaacetylglucose), five different drug:excipient ratios (1:5, 1:2, 1:1, 2:1, and 5:1, w/w), and three different solid state characterization tools (differential scanning calorimetry, X-ray powder diffraction, and dielectric relaxation spectroscopy) were selected for the present research. Our investigation has shown that the excipient concentration and its molecular structure reveal quasi-identical molecular dynamic behavior of solid dispersions above and below the glass transition temperature. Across to complementary quantum mechanical simulations, we point out a clear indication of a strong interaction between biclotymol and the acetylated saccharides. Moreover, the thermodynamic study on these amorphous solid dispersions highlighted a stabilizing effect of α-pentaacetylglucose regardless of its quantity while an excessive concentration of β-pentaacetylglucose revealed a poor crystallization inhibition. Finally, through long-term stability studies, we also showed the limiting excipient concentration needed to stabilize our amorphous API. Herewith, the developed procedure in this paper appears to be a promising tool for solid-state characterization of complex pharmaceutical formulations.

Noncrystalline Titanium Oxide Catalysts for Electrochemical Oxygen Reduction Reactions

Titanium oxides crystals are widely used in a variety of fields, but little has been reported on the functionalities of noncrystalline intermediates formed in their structural transformation. We measured the oxygen reduction reaction activity of titanium oxide nanoparticles heat-treated for a different time and found that the activity abruptly increased at a certain time of the treatment. We analyzed their structures by using X-ray pair distribution functions with the help of high-resolution transmission electron microscopy and X-ray photoelectron spectroscopy and ascertained that the abrupt increase in the activity corresponded to a structural transformation from a reduced lepidocrocite-type layered titanate to a disordered structure consisting of domains of brookite-like TiO₆ octahedral linkages. The further treatment transformed these brookite-like domains into another phase having more edge-sharing sites like the TiO-type cubic structure. This finding would position noncrystalline, disordered structure as a possible origin of the catalytic activity, though nanocrystalline rutile particles might be also considered as the origin.

Two-Dimensional Corrugated Porous Carbon-, Nitrogen-Framework/Metal Heterojunction for Efficient Multielectron Transfer Processes with Controlled Kinetics

The material choice for efficient electrocatalysts is limited because it is necessary to be highly active as well as highly stable. One direction to solve this issue is to understand elementary steps of electrode processes and build an unconventional strategy for a conversion of inert and, therefore, stable materials into efficient catalysts. Herein, we propose a simple concept for obtaining catalysts from inert and hence stable materials by forming their heterojunctions, namely, covering inert Au with corrugated carbon-nitrogen-based two-dimensional porous frameworks. It shows more than 10 times better activity for the hydrogen evolution reaction than for the pure Au surface, and it also demonstrates the high catalytic activity for the oxygen reduction reaction (ORR) via an effective four-electron reduction mechanism, which is different from the usual two-electron reduction typical for ORR on Au surfaces. This activity induced by formation of a heterojunction was analyzed by a conjugation of computational and experimental methods and found to originate from alternative efficient reaction pathways that emerged by the corrugated porous framework and the Au surface. This work provides not only the method for creating active surface but also the knowledge on elementary steps of such complicated multielectron transfer reactions, thereby leading to intriguing strategies for developing energy conversion reactions based on materials which had never been considered as catalysts before.