Nanocrystal Dissolution Kinetics and Solubility Increase Prediction from Molecular Dynamics: The Case of α-, β-, and γ-Glycine

Utilizing Molecular Simulations to Examine Nanosuspension Stability

Drug nanosuspensions offer a promising approach to improve bioavailability for poorly soluble drug candidates. Such formulations often necessitate the inclusion of an excipient to stabilize the drug nanoparticles. However, the rationale for the choice of the correct excipient for a given drug candidate remains unclear. To gain molecular insight into formulation design, this work first utilizes a molecular dynamics simulation to computationally investigate drug-excipient interactions for a number of combinations that have been previously studied experimentally. We find that hydrophobic interactions drive excipient adsorption to drug nanoparticles and that the fraction of polar surface area serves as a predictor for experimental measurements of nanosuspension stability. To test these ideas prospectively, we applied our model to an uncharacterized drug compound, GDC-0810. Our simulations predicted that a salt form of GDC-0810 would lead to more stable nanosuspensions than the neutral form; therefore, we tested the stability of salt GDC-0810 nanosuspensions and found that the salt form readily formed nanosuspensions even without the excipient. To avoid computationally expensive simulations in the future, we extended our model by showing that simple, two-dimensional properties of single drug molecules can be used to rationalize nanosuspension designs without simulations. In all, our work demonstrates how computational tools can provide molecular insight into drug-excipient interactions and aid in rational formulation design.

Polymorphs with Remarkably Distinct Physical and/or Chemical Properties

Polymorphism in crystals is known since 1822 and the credit goes to Mitscherlich who realized the existence of different crystal structures of the same compound while working with some arsenate and phosphate salts. Later on, this phenomenon was observed also in organic crystals. With the advent of different technologies, especially the easy availability of single crystal XRD instruments, polymorphism in crystals has become a common phenomenon. Almost 37 % of compounds (single component) are polymorphic to date. As the energies of the different polymorphic forms are very close to each other, small changes in crystallization conditions might lead to different polymorphic structures. As a result, sometimes it is difficult to control polymorphism. For this reason, it is considered to be a nuisance to crystal engineering. It has been realized that the property of a material depends not only on the molecular structure but also on its crystal structure. Therefore, it is not only of interest to academia but also has widespread applications in the materials science as well as pharmaceutical industries. In this review, we have discussed polymorphism which causes significant changes in materials properties in different fields of solid-state science, such as electrical, magnetic, SHG, thermal expansion, mechanical, luminescence, color, and pharmaceutical. Therefore, this review will interest researchers from supramolecular chemistry, materials science as well as medicinal chemistry.

Silymarin nanocrystals-laden chondroitin sulphate-based thermoreversible hydrogels; A promising approach for bioavailability enhancement

Hydrogels has gained tremendous interest as a controlled release drug delivery. However, currently it is a big challenge to attain high drug-loading as well as stable and sustained release of hydrophobic drugs. The poor aqueous solubility and low bioavailability of many drugs have driven the need for research in new formulations. This manuscript hypothesized that incorporation of nanocrystals of hydrophobic drug, such as silymarin into thermoreversible hydrogel could be a solution to these problems. Herein, we prepared nanocrystals of silymarin by antisolvent precipitation technique and characterized for morphology, particle size, polydispersity index (PDI) and zeta potential. Moreover, physical cross-linking of hydrogel formulations based on chondroitin sulphate (CS), kappa-Carrageenan (κ-Cr) and Pluronic® F127 was confirmed by Fourier transformed infrared spectroscopy (FT-IR). The hydrogel gelation time and temperature of optimized hydrogel was 14 ± 3.2 s and 34 ± 0.6 °C, respectively. The release data revealed controlled release of silymarin up to 48 h and in-vivo pharmacokinetic profiling was done in rabbits and further analyzed by high-performance liquid chromatography (HPLC). It is believed that the nanocrystals loaded thermoreversible injectable hydrogel system fabricated in this study provides high drug loading as well as controlled and stable release of hydrophobic drug for extended period.

Influence of Monovalent Salts on α-Glycine Crystal Growth from Aqueous Solution: Molecular Dynamics Simulations at Constant Supersaturation Conditions

The growth of α-glycine crystals from aqueous solution is investigated at constant supersaturations by utilizing the constant chemical potential molecular dynamics method. The study considers two faces (010) and (011) that predominantly determine the α-glycine crystal morphology. The general Amber force field (GAFF) with two different charge sets derived from semi-empirical calculations using the complete neglect of differential overlap method (CNDO) and from density functional calculations using the double-numerical plus d- and p-polarization basis set (DNP) is applied to describe α-glycine. The extended simple point charge model is used to simulate water. It is observed that the GAFF/DNP set leads to a much slower integration of glycine molecules into the crystal structure than the GAFF/CNDO set. The GAFF/CNDO set, however, causes the growth even at concentrations well below the experimental solubility. For the GAFF/DNP set, the influence of potassium chloride (KCl) and sodium chloride (NaCl) on the face growth rates is investigated. The parameters recently proposed by Yagasaki et al. [J. Chem. Theory Comput. 2020, 16, 2460-2473] are used to describe salt ions, as standard GAFF parameters lead to the unexpected formation of salt clusters at a concentration lower than the experimental solubility value. According to our simulation results, both salts suppress the growth of the (011) and (010) faces. The inhibiting effect of NaCl is much stronger than that of KCl for the (011) face, while both salts have a similar inhibiting effect on the (010) face. The results are in line with the experimental observations of the impact of salt ions on the α-glycine growth rates for the (011) face reported in literature.

The potential of intranasal delivery of nanocrystals in powder form on the improvement of zaleplon performance: in-vitro, in-vivo assessment

OBJECTIVE

The present work focuses on improving zaleplon (ZAP) performance through nanosizing its insoluble particles which were then delivered intranasally in powder form.

SIGNIFICANCE

Since nanopowders have an exceptional ability to cross cell membrane, their absorption is facilitated in the solid form. Hence, delivering insoluble ZAP nanocrystals (NC) through intranasal route improves its bioavailability due to both nanosization and the escape of hepatic metabolism.

METHODS

Nanocrystals were prepared by anti-solvent precipitation followed by probe sonication in presence of Soluplus^®, Poloxamer-188 (0.25%), sodium lauryl sulfate (0.5%), and mannitol. Physicochemical evaluation of the prepared NC was done by DSC and XRPD. TGA was performed for stability detection. Ex vivo permeation study through isolated cattle nasal mucosal membrane, in addition to an in vivo bioavailability study was performed for assessment of the prepared NC.

RESULTS

Nanosization to 200 nm contributed to the enhancement in dissolution ∼100% within 30 min and reduced half-life to 1.63 min. Confirmation of adsorption of polymers over NC' surface was elucidated. TGA confirmed their thermal stability. Ex vivo permeation study showed a 2.7 enhancement ratio in favor of the prepared NC. Both the extent and rate of NC absorption through nasal mucosa of rabbits were significantly higher (p ˂ .05) than in case of oral tablets. The relative bioavailability of NC was increased 3.14 times as compared to the Sleep aid^® tablets.

CONCLUSION

The intranasal delivery of nanoscale ZAP powder proved to be a successful alternative to oral formulations that suffer poor absorption and limited bioavailability.

Capturing Crystal Shape Evolution from Molecular Simulations

A simple and efficient algorithm for tracking shape evolution of small-molecule organic crystals during molecular simulations is described. It is based on the reconstruction of a crystal surface from molecular coordinates using an alpha-shape triangulation algorithm followed by the DBSCAN clustering of neighboring triangles with similar normal vectors to crystal faces. No information except the unit cell parameters is needed beforehand, enabling the user to automatically detect not only existing but also new forming crystal faces and edges, which is valuable for prediction of growth and dissolution kinetics. The results are demonstrated for aspirin and paracetamol crystals.

Quantifying the Ultraslow Desorption Kinetics of 2,6-Naphthalenedicarboxylic Acid Monolayers at Liquid-Solid Interfaces

Kinetic effects in monolayer self-assembly at liquid-solid interfaces are not well explored but can provide unique insights. We use variable-temperature scanning tunneling microscopy (STM) to quantify the desorption kinetics of 2,6-naphthalenedicarboxylic acid (NDA) monolayers at nonanoic acid-graphite interfaces. Quantitative tracking of the decline of molecular coverages by STM between 57.5 and 65.0 °C unveiled single-exponential decays over the course of days. An Arrhenius plot of rate constants derived from fits results in a surprisingly high energy barrier of 208 kJ mol^-1 that strongly contrasts with the desorption energy of 16.4 kJ mol^-1 with respect to solution as determined from a Born-Haber cycle. This vast discrepancy indicates a high-energy transition state. Expanding these studies to further systems is the key to pinpointing the molecular origin of the remarkably large NDA desorption barrier.

Degrees of order: A comparison of nanocrystal and amorphous solids for poorly soluble drugs

Poor aqueous solubility is currently a prevalent issue in the development of small molecule pharmaceuticals. Several methods are possible for improving the solubility, dissolution rate and bioavailability of Biopharmaceutics Classification System (BCS) class II and class IV drugs. Two solid state approaches, which rely on reductions in order, and can theoretically be applied to all molecules without any specific chemical prerequisites (compared with e.g. ionizable or co-former groups, or sufficient lipophilicity), are the use of the amorphous form and nanocrystals. Research involving these two approaches is relatively extensive and commercial products are now available based on these technologies. Nevertheless, their formulation remains more challenging than with conventional dosage forms. This article describes these two technologies from both theoretical and practical perspectives by briefly discussing the physicochemical backgrounds behind these approaches, as well as the resulting practical implications, both positive and negative. Case studies demonstrating the benefits and challenges of these two techniques are presented.