Potential Hepatitis B Vaccine Formulation Prepared by Uniform-Sized Lipid Hybrid PLA Microparticles with Adsorbed Hepatitis B Surface Antigen

Process Optimization of Scaled-Up Production and Biosafety Evaluation of the Dimethyl-Dioctadecyl-Ammonium Bromide/Poly(lactic acid) Nano-Vaccine

Nano-adjuvant vaccines could induce immune responses and enhance immunogenicity. However, the application and manufacturing of nano-adjuvant is hampered by its challenging scale-up, poor reproducibility, and low security. Therefore, the present study aimed to optimize the preparation nanoparticles (NPs) using FDA-approved biopolymer materials poly(lactic acid) (PLA) and cationic lipid didodecyl-dimethyl-ammonium bromide (DDAB), develop the scale-up process, and evaluate the stability and biosafety of it. The optimum preparation conditions of DDAB/PLA NPs on a small scale were as follows: DDAB amount of 30 mg, aqueous phase volume of 90 mL, stirring rate at 550 rpm, and solidifying time of 12 h. Under the optimum conditions, the size of the NPs was about 170 nm. In scale-up preparation experiments, the vacuum rotary evaporation of 6 h and the Tangential flow ultrafiltration (TFU) method were the optimum conditions. The results suggested that DDAB/PLA NPs exhibited a uniform particle size distribution, with an average size of 150.3 ± 10.4 nm and a narrow polydispersity index (PDI) of 0.090 ± 0.13, coupled with a high antigen loading capacity of 85.4 ± 4.0%. In addition, the DDAB/PLA NPs can be stored stably for 30 days and do not have side effects caused by residual solvents. For biosafety, the acute toxicity experiments showed good tolerance of the vaccine formulation even at a high adjuvant dose. The local irritation experiment demonstrated the reversibility of muscular irritation, and the repeated toxicity experiment revealed no significant necrosis or severe lesions in mice injected with the high-dose vaccine formulation. Overall, the DDAB/PLA NPs exhibit potential for clinical translation as a safe candidate vaccine adjuvant.

Novel therapeutic approaches for the management of hepatitis infections

Hepatitis B virus (HBV) & hepatitis C virus (HCV) infection is a substantial reason for morbidity and mortality around the world. Chronic hepatitis B (CHB) infection is connected with an enhanced risk of liver cirrhosis, liver decompensation and hepatocellular carcinoma (HCC). Conventional therapy do face certain challenges, for example, poor tolerability and the growth of active resistance. Thus, novel treatment procedures are essential to accomplish the initiation of strong and stable antiviral immune reactions of the individuals. This review explores the current nanotechnology-based carriers for drug and vaccine delivery to treat HBV and HCV.

In vitro and in vivo evaluation of immune response of poly(lactic acid) nanoparticles with different end groups

Poly(lactic acid) (PLA) has excellent properties of biodegradability and biocompatibility, which is a US Food and Drug Administration (FDA) approved biopolymer for the preparation of safe and effective vaccines, drugs, and gene delivery systems. However, there still exists a great problem whether and how the end group affects the immune response of PLA vaccines. Therefore, the aim of this study was to evaluate the in vitro and in vivo of immune response of PLA nanoparticles (NPs) with carboxyl (COOH) and ester (COOR) end groups. In vitro experiments suggested COOH NPs could promote the higher phagocytosis and activation of bone marrow dendritic cells (BMDCs) with a lower cytotoxicity. In vivo experiments showed that COOR NPs and COOH NPs could strongly elicit IgG, IgG1, and IgG2a responses both in the short and long-terms. However, the highest T cell and B cell activation, and central memory T cells response was induced by COOH NPs. In addition, the COOH NPs could significantly enhance splenocytes proliferation and cytokines secretion. Thus, the PLA with the COOH end group shows greater potential as efficient carrier materials of NPs for enhancing cellular and humoral immune responses.

Co-delivery of Interleukin-12 and Doxorubicin Loaded Nano-delivery System for Enhanced Immunotherapy with Polarization toward M1-type Macrophages

Chemo-immunotherapy has gained increasing attention as one of the most promising combination therapy strategies to battle cancer. In this study, the therapeutic nanoparticles (TNPs) co-delivering doxorubicin (DOX) and IL-12 (IL-12) were developed for chemo-immunotherapy combination therapy on liver cancer. TNPs were synthesized based on the ionic interactions between cationic chitosan (Ch) and anionic poly-(glutamic acid) (PGA). DOX and IL-12 loaded in TNPs presented prolonged circulation in blood, efficient accumulation in tumors, and internalization in tumor cells. After that, DOX and IL-12 were co-released in the tumor microenvironment. The locally responsive property of TNPs could subsequently re-educate macrophages. More significantly, TNPs with no obvious side effects can remarkably inhibit the H22 tumor growth in vivo. A low dosage of loaded IL-12 in TNPs can effectively polarize macrophages toward the M1 phenotype to reduce tumor burden, further enhancing the antitumor efficacy. Our results suggest that the self-stabilized TNPs could be a secure and effective drug carrier for intravenous administration when deprived of protective agents.

Engineered Nanoparticles inside a Microparticle Oral System for Enhanced Mucosal and Systemic Immunity

Antigen delivery through an oral route requires overcoming multiple challenges, including gastrointestinal enzymes, mucus, and epithelial tight junctions. Although each barrier has a crucial role in determining the final efficiency of the oral vaccination, transcytosis of antigens through follicle-associated epithelium (FAE) represents a major challenge. Most of the research is focused on delivering an antigen to the M-cell for FAE transcytosis because M-cells can easily transport the antigen from the luminal site. However, the fact is that the M-cell population is less than 1% of the total gastrointestinal cells, and most of the oral vaccines have failed to show any effect in clinical trials. To challenge the current dogma of M-cell targeting, in this study, we designed a novel tandem peptide with a FAE-targeting peptide at the front position and a cell-penetrating peptide at the back position. The tandem peptide was attached to a smart delivery system, which overcomes the enzymatic barrier and the mucosal barrier. The result showed that the engineered system could target the FAE (enterocytes and M-cells) and successfully penetrate the enterocytes to reach the dendritic cells located at the subepithelium dome. There was successful maturation and activation of dendritic cells in vitro confirmed by a significant increase in maturation markers such as CD40, CD86, presentation marker MHC I, and proinflammatory cytokines (TNF-α, IL-6, and IL-10). The in vivo results showed a high production of CD4+ T-lymphocytes (helper T-cell) and a significantly higher production of CD8+ T-lymphocytes (killer T-cell). Finally, the production of mucosal immunity (IgA) in the trachea, intestine, and fecal extracts and systemic immunity (IgG, IgG1, and IgG2a) was successfully confirmed. To the best of our knowledge, this is the first study that designed a novel tandem peptide to target the FAE, which includes M-cells and enterocytes rather than M-cell targeting and showed that a significant induction of both the mucosal and systemic immune response was achieved compared to M-cell targeting.

Polymer-Based Nanosystems-A Versatile Delivery Approach

Polymer-based nanoparticles of tailored size, morphology, and surface properties have attracted increasing attention as carriers for drugs, biomolecules, and genes. By protecting the payload from degradation and maintaining sustained and controlled release of the drug, polymeric nanoparticles can reduce drug clearance, increase their cargo's stability and solubility, prolong its half-life, and ensure optimal concentration at the target site. The inherent immunomodulatory properties of specific polymer nanoparticles, coupled with their drug encapsulation ability, have raised particular interest in vaccine delivery. This paper aims to review current and emerging drug delivery applications of both branched and linear, natural, and synthetic polymer nanostructures, focusing on their role in vaccine development.

Advances in vaccine delivery systems against viral infectious diseases

Although vaccines are available for many infectious diseases, there are still unresolved infectious diseases that threaten global public health. In particular, the rapid spread of unpredictable, highly contagious viruses has recorded numerous infection cases and deaths, and has changed our lives socially or economically through social distancing and wearing masks. The pandemics of unpredictable, highly contagious viruses increase the ever-high social need for rapid vaccine development. Nanotechnologies may hold promise and expedite the development of vaccines against newly emerging infectious viruses. As potential nanoplatforms for delivering antigens to immune cells, delivery systems based on lipids, polymers, proteins, and inorganic nanomaterials have been studied. These nanoplatforms have been tested as a means to deliver vaccines not as a whole, but in the form of protein subunits or as DNA or mRNA sequences encoding the antigen proteins of viruses. This review covers the current status of nanomaterial-based delivery systems for viral antigens, with highlights on nanovaccines against recently emerging infectious viruses, such as severe acute respiratory syndrome coronavirus-2, Middle East respiratory syndrome coronavirus, and Zika virus.

Polymeric nanoparticle vaccines to combat emerging and pandemic threats

Subunit vaccines are more advantageous than live attenuated vaccines in terms of safety and scale-up manufacture. However, this often comes as a trade-off to their efficacy. Over the years, polymeric nanoparticles have been developed to improve vaccine potency, by engineering their physicochemical properties to incorporate multiple immunological cues to mimic pathogenic microbes and viruses. This review covers recent advances in polymeric nanostructures developed toward particulate vaccines. It focuses on the impact of microbe mimicry (e.g. size, charge, hydrophobicity, and surface chemistry) on modulation of the nanoparticles’ delivery, trafficking, and targeting antigen-presenting cells to elicit potent humoral and cellular immune responses. This review also provides up-to-date progresses on rational designs of a wide variety of polymeric nanostructures that are loaded with antigens and immunostimulatory molecules, ranging from particles, micelles, nanogels, and polymersomes to advanced core-shell structures where polymeric particles are coated with lipids, cell membranes, or proteins.

The incorporation of cationic property and immunopotentiator in poly (lactic acid) microparticles promoted the immune response against chronic hepatitis B

Biodegradable microparticles (MPs) as vaccine adjuvants have sparked the passion of researchers in recent decades. However, it is still a huge challenge to develop an efficient vaccine delivery system to reverse chronic hepatitis B (CHB). Herein, we integrated a physiochemical merit and an immunopotentiator property in poly (lactic acid) (PLA) MPs and verified the therapeutic effect on CHB model mice. We prepared uniform MPs with insertion of cationic lipid didodecyldimethylammonium bromide (DDAB), which endowed a physiochemical merit for MPs. Such a DDAB-PLA (DP) group raised the recruitment of immune cells to the injection site along with the secretion of chemokines and pro-inflammatory cytokines, promoting the activation of antigen-presenting cells (APCs). Further combination of stimulator of interferon genes (STING) agonist 5,6-dimethylxanthenone-4-acetic acid (DMXAA) (DP-D) elevated 5.8-fold higher interferon regulatory factor 7 (IRF-7) expression compared to that for DP group. The DP group showed preferred lysosome escape advantage, which was in line with the DMXAA release behavior and the intracellular target of DMXAA. In addition, DP-D vaccine augmented the IFN-γ secreting splenocytes and motivated Th1-biased antibodies in a more efficient way than that for the DP group. In the CHB model, the MPs based vaccines achieved 50% HBsAg seroconversion rate, and HBcAg in the liver also got a reduction. DP-D produced higher amount of memory T/B cells to confer protection in a sustained manner. Present work thus provided a promising strategy, via integrating a fine-tuned physiochemical property and an immunopotentiator virtue in the MPs, which synergistically reinforced both humoral and cellular immune responses against CHB.

Integrating Biomaterials and Immunology to Improve Vaccines Against Infectious Diseases

Despite the success of vaccines in preventing many infectious diseases, effective vaccines against pathogens with ongoing challenges - such as HIV, malaria, and tuberculosis - remain unavailable. The emergence of new pathogen variants, the continued prevalence of existing pathogens, and the resurgence of yet other infectious agents motivate the need for new, interdisciplinary approaches to direct immune responses. Many current and candidate vaccines, for example, are poorly immunogenic, provide only transient protection, or create risks of regaining pathogenicity in certain immune-compromised conditions. Recent advances in biomaterials research are creating new potential to overcome these challenges through improved formulation, delivery, and control of immune signaling. At the same time, many of these materials systems - such as polymers, lipids, and self-assembly technologies - may achieve this goal while maintaining favorable safety profiles. This review highlights ways in which biomaterials can advance existing vaccines to safer, more efficacious technologies, and support new vaccines for pathogens that do not yet have vaccines. Biomaterials that have not yet been applied to vaccines for infectious disease are also discussed, and their potential in this area is highlighted.