Wavelength-Tunable Interlayer Exciton Emission at the Near-Infrared Region in van der Waals Semiconductor Heterostructures

All-Optic Logical Operations Based on the Visible-Near Infrared Bipolar Optical Response

The burgeoning need for extensive data processing has sparked enthusiasm for the development of a novel optical logic gate platform. In this study, junction field-effect phototransistors based on molybdenum disulfide/Germanium (MoS2/Ge) heterojunctions are constructed as optical logic units. This device demonstrates a positive photoresponse that is attributed to the photoconductivity effect occurring upon irradiation with visible (Vis) light. Under the illumination of near-infrared (NIR) optics with wavelengths within the communication band, the device shows a negative photoresponse, which is associated with the interlayer Coulomb interactions. The current state of the device can be effectively modulated as different logical states by precisely tuning the wavelength and power density of the optical. Within a 3 × 3 MoS2/Ge phototransistor array, five essentially all-optical logic gates ("AND," "OR," "NAND," "NOT," and "NOR") can be achieved in every signal unit. Furthermore, three complex all-optical logical operations are demonstrated by integrating two MoS2/Ge phototransistors in series. Compared to electronic designs, these all-optical logic devices offer a significant reduction in transistor number, with savings of 50-94% when implementing the above-mentioned functions. These results present opportunities for the development of photonic chips with low power consumption, high fidelity, and large volumes.

Resonant Band Hybridization in Alloyed Transition Metal Dichalcogenide Heterobilayers

Bandstructure engineering using alloying is widely utilized for achieving optimized performance in modern semiconductor devices. While alloying has been studied in monolayer transition metal dichalcogenides, its application in van der Waals heterostructures built from atomically thin layers is largely unexplored. Here, heterobilayers made from monolayers of WSe2 (or MoSe2) and MoxW1 - xSe2 alloy are fabricated and nontrivial tuning of the resultant bandstructure is observed as a function of concentration x. This evolution is monitored by measuring the energy of photoluminescence (PL) of the interlayer exciton (IX) composed of an electron and hole residing in different monolayers. In MoxW1 - xSe2/WSe2, a strong IX energy shift of ≈100 meV is observed for x varied from 1 to 0.6. However, for x < 0.6 this shift saturates and the IX PL energy asymptotically approaches that of the indirect bandgap in bilayer WSe2. This observation is theoretically interpreted as the strong variation of the conduction band K valley for x > 0.6, with IX PL arising from the K - K transition, while for x < 0.6, the bandstructure hybridization becomes prevalent leading to the dominating momentum-indirect K - Q transition. This bandstructure hybridization is accompanied with strong modification of IX PL dynamics and nonlinear exciton properties. This work provides foundation for bandstructure engineering in van der Waals heterostructures highlighting the importance of hybridization effects and opening a way to devices with accurately tailored electronic properties.

Alloy Engineering Allows On-Demand Design of Ultrasensitive Monolayer Semiconductor SERS Substrates

The chemical mechanism (CM) of surface-enhanced Raman scattering (SERS) has been recognized as a decent approach to mildly amplify Raman scattering. However, the insufficient charge transfer (CT) between the SERS substrate and molecules always results in unsatisfying Raman enhancement, exerting a substantial restriction for CM-based SERS. In principle, CT is dominated by the coupling between the energy levels of a semiconductor-molecule system and the laser wavelength, whereas precise tuning of the energy levels is intrinsically difficult. Herein, two-dimensional transition-metal dichalcogenide alloys, whose energy levels can be precisely and continuously tuned over a wide range by simply adjusting their compositions, are investigated. The alloys enable on-demand construction of the CT resonance channels to cater to the requirements of a specific target molecule in SERS. The SERS signals are highly reproducible, and a clear view of the SERS dependences on the energy levels is revealed for different CT resonance terms.

Recent Progress in Fabrication and Physical Properties of 2D TMDC-Based Multilayered Vertical Heterostructures

Two-dimensional (2D) vertical heterojunctions (HSs), which are usually fabricated by vertically stacking two layers of transition metal dichalcogenide (TMDC), have been intensively researched during the past years. However, it is still an enormous challenge to achieve controllable preparation of the TMDC trilayer or multilayered van der Waals (vdWs) HSs, which have important effects on physical properties and device performance. In this review, we will introduce fundamental features and various fabrication methods of diverse TMDC-based multilayered vdWs HSs. This review focuses on four fabrication methods of TMDC-based multilayered vdWs HSs, such as exfoliation, chemical vapor deposition (CVD), metal-organic chemical vapor deposition (MOCVD), and pulsed laser deposition (PLD). The latest progress in vdWs HS-related novel physical phenomena are summarized, including interlayer excitons, long photocarrier lifetimes, upconversion photoluminescence, and improved photoelectrochemical catalysis. At last, current challenges and prospects in this research field are provided.

Strategies for Controlled Growth of Transition Metal Dichalcogenides by Chemical Vapor Deposition for Integrated Electronics

In recent years, transition metal dichalcogenide (TMD)-based electronics have experienced a prosperous stage of development, and some considerable applications include field-effect transistors, photodetectors, and light-emitting diodes. Chemical vapor deposition (CVD), a typical bottom-up approach for preparing 2D materials, is widely used to synthesize large-area 2D TMD films and is a promising method for mass production to implement them for practical applications. In this review, we investigate recent progress in controlled CVD growth of 2D TMDs, aiming for controlled nucleation and orientation, using various CVD strategies such as choice of precursors or substrates, process optimization, and system engineering. We then survey different patterning methods, such as surface patterning, metal precursor patterning, and postgrowth sulfurization/selenization/tellurization, to mass produce heterostructures for device applications. With these strategies, various well-designed architectures, such as wafer-scale single crystals, vertical and lateral heterostructures, patterned structures, and arrays, are achieved. In addition, we further discuss various electronics made from CVD-grown TMDs to demonstrate the diverse application scenarios. Finally, perspectives regarding the current challenges of controlled CVD growth of 2D TMDs are also suggested.

Band Alignment Engineering by Twist Angle and Composition Modulation for Heterobilayer

Atomically thin monolayer semiconducting transition metal dichalcogenides (TMDs), exhibiting direct band gap and strong light-matter interaction, are promising for optoelectronic devices. However, an efficient band alignment engineering method is required to further broaden their practical applications as versatile optoelectronics. In this work, the band alignment of two vertically stacked monolayer TMDs using the chemical vapor deposition (CVD) method is effectively tuned by two strategies: 1) formulating the compositions of MoS_2(1-x) Se_2x alloys, and 2) varying the twist angles of the stacked heterobilayer structures. Photoluminescence (PL) results combined with density functional theory (DFT) calculation show that by changing the alloy composition, a continuously tunable band alignment and a transition of type II-type I-type II band alignment of TMD heterobilayer is achieved. Moreover, only at moderate (10°-50°) twist angles, a PL enhancement of 28%-110% caused by the type I alignment is observed, indicating that the twist angle is coupled with the global band structure of heterobilayer. A heterojunction device made with MoS_0.76 Se_1.24 /WS₂ of 14° displays a significantly high photoresponsivity (55.9 A W^-1 ), large detectivity (1.07 × 10¹⁰ Jones), and high external quantum efficiency (135%). These findings provide engineering tools for heterostructure design for their application in optoelectronic devices.

Enhanced light-matter interaction in two-dimensional transition metal dichalcogenides

Two-dimensional (2D) transition metal dichalcogenide (TMDC) materials, such as MoS₂, WS₂, MoSe₂, and WSe₂, have received extensive attention in the past decade due to their extraordinary electronic, optical and thermal properties. They evolve from indirect bandgap semiconductors to direct bandgap semiconductors while their layer number is reduced from a few layers to a monolayer limit. Consequently, there is strong photoluminescence in a monolayer (1L) TMDC due to the large quantum yield. Moreover, such monolayer semiconductors have two other exciting properties: large binding energy of excitons and valley polarization. These properties make them become ideal materials for various electronic, photonic and optoelectronic devices. However, their performance is limited by the relatively weak light-matter interactions due to their atomically thin form factor. Resonant nanophotonic structures provide a viable way to address this issue and enhance light-matter interactions in 2D TMDCs. Here, we provide an overview of this research area, showcasing relevant applications, including exotic light emission, absorption and scattering features. We start by overviewing the concept of excitons in 1L-TMDC and the fundamental theory of cavity-enhanced emission, followed by a discussion on the recent progress of enhanced light emission, strong coupling and valleytronics. The atomically thin nature of 1L-TMDC enables a broad range of ways to tune its electric and optical properties. Thus, we continue by reviewing advances in TMDC-based tunable photonic devices. Next, we survey the recent progress in enhanced light absorption over narrow and broad bandwidths using 1L or few-layer TMDCs, and their applications for photovoltaics and photodetectors. We also review recent efforts of engineering light scattering, e.g., inducing Fano resonances, wavefront engineering in 1L or few-layer TMDCs by either integrating resonant structures, such as plasmonic/Mie resonant metasurfaces, or directly patterning monolayer/few layers TMDCs. We then overview the intriguing physical properties of different van der Waals heterostructures, and their applications in optoelectronic and photonic devices. Finally, we draw our opinion on potential opportunities and challenges in this rapidly developing field of research.

Dipole moment and pressure dependent interlayer excitons in MoSSe/WSSe heterostructures

The broken mirror symmetry of two-dimensional (2D) Janus materials brings novel quantum properties and various application prospects. Particularly, when stacking into heterostructures, their intrinsic dipole moments and large band offsets are very favorable to the photoexcited properties concerning electron-hole pairs, i.e., excitons. However, the effect of the intrinsic dipole moments on the interlayer excitons in the heterostructures composed of 2D Janus materials is still unclear. Here we use the GW/BSE methods to explore the effect of the intrinsic dipole moments on the interlayer excitons via varying the stacking configuration of MoSSe/WSSe heterostructures. Surprisingly, our results reveal that the parallel-arranged intrinsic dipole moments enhance the interlayer coupling in the heterostructures, and hence make the lowest interlayer exciton have an intensity comparable to the bright excitons while accompanied by a large binding energy and a radiative lifetime as long as 10^-7 s at 300 K, though it is almost a spin-forbidden process, and with the out-of-plane light polarization, long lifetime interlayer excitons are observed under the effect of selection rules. More intriguingly, we found that the photoexcited properties of the interlayer excitons considering the momentum in the stacking configuration with parallel-arranged intrinsic dipole moments are greatly tunable through hydrostatic pressure. These explorations provide a basic perspective for optoelectronic applications by means of engineering the intrinsic dipole moments in Janus heterostructures.

Optical Inspection of 2D Materials: From Mechanical Exfoliation to Wafer-Scale Growth and Beyond

Optical inspection is a rapid and non-destructive method for characterizing the properties of two-dimensional (2D) materials. With the aid of optical inspection, in situ and scalable monitoring of the properties of 2D materials can be implemented industrially to advance the development and progress of 2D material-based devices toward mass production. This review discusses the optical inspection techniques that are available to characterize various 2D materials, including graphene, transition metal dichalcogenides (TMDCs), hexagonal boron nitride (h-BN), group-III monochalcogenides, black phosphorus (BP), and group-IV monochalcogenides. First, the authors provide an introduction to these 2D materials and the processes commonly used for their fabrication. Then they review several of the important structural properties of 2D materials, and discuss how to characterize them using appropriate optical inspection tools. The authors also describe the challenges and opportunities faced when applying optical inspection to recently developed 2D materials, from mechanically exfoliated to wafer-scale-grown 2D materials. Most importantly, the authors summarize the techniques available for largely and precisely enhancing the optical signals from 2D materials. This comprehensive review of the current status and perspective of future trends for optical inspection of the structural properties of 2D materials will facilitate the development of next-generation 2D material-based devices.

Layer-engineered interlayer excitons

Photoluminescence (PL) from excitons serves as a powerful tool to characterize the optoelectronic property and band structure of semiconductors, especially for atomically thin two-dimensional transition metal dichalcogenide (TMD) materials. However, PL quenches quickly when the thickness of TMD materials increases from monolayer to a few layers, due to the change from direct to indirect band transition. Here, we show that PL can be recovered by engineering multilayer heterostructures, with the band transition reserved to be a direct type. We report emission from layer-engineered interlayer excitons from these multilayer heterostructures. Moreover, as desired for valleytronics devices, the lifetime, valley polarization, and valley lifetime of the generated interlayer excitons can all be substantially improved as compared with that in the monolayer-monolayer heterostructure. Our results pave the way for controlling the properties of interlayer excitons by layer engineering.

Interlayer exciton formation, relaxation, and transport in TMD van der Waals heterostructures

Van der Waals (vdW) heterostructures based on transition metal dichalcogenides (TMDs) generally possess a type-II band alignment that facilitates the formation of interlayer excitons between constituent monolayers. Manipulation of the interlayer excitons in TMD vdW heterostructures holds great promise for the development of excitonic integrated circuits that serve as the counterpart of electronic integrated circuits, which allows the photons and excitons to transform into each other and thus bridges optical communication and signal processing at the integrated circuit. As a consequence, numerous studies have been carried out to obtain deep insight into the physical properties of interlayer excitons, including revealing their ultrafast formation, long population recombination lifetimes, and intriguing spin-valley dynamics. These outstanding properties ensure interlayer excitons with good transport characteristics, and may pave the way for their potential applications in efficient excitonic devices based on TMD vdW heterostructures. At present, a systematic and comprehensive overview of interlayer exciton formation, relaxation, transport, and potential applications is still lacking. In this review, we give a comprehensive description and discussion of these frontier topics for interlayer excitons in TMD vdW heterostructures to provide valuable guidance for researchers in this field.

Localized state effect and exciton dynamics for monolayer WS2

The two-dimensional transition metal dichalcogenides (TMDCs) have been considered as promising candidates for developing a new generation of optoelectronic devices. Accordingly, investigations of exciton dynamics are of great importance for understanding the physics and the performance of devices based on TMDCs. Herein, after exposure to ambient environment for six months, monolayer tungsten disulfide (WS₂) shows formation of localized states. Photoluminescence (PL) and time-resolved PL (TRPL) spectra demonstrate that these localized states have significant impacts on the exciton dynamics, including energy states filling, thermal activation and redistribution, and the decay behavior of excitons. These observations not only enrich the understanding for localized states and correlated exciton dynamics of aged monolayer WS₂, but also reveal a possible approach to modulate the optical properties of TMDCs via the aging process.

Room-Temperature Exciton-Based Optoelectronic Switch

Excitons, bound pairs of electrons and holes, could act as an intermediary between electronic signal processing and optical transmission, thus speeding up the interconnection of photoelectric communication. However, up to date, exciton-based logic devices such as switches that work at room temperature are still lacking. This work presents a prototype of a room-temperature optoelectronic switch based on excitons in WSe₂ monolayer. The emission intensity of WSe₂ stacked on Au and SiO₂ substrates exhibits completely opposite behaviors upon applying gate voltages. Such observation can be ascribed to different doping behaviors of WSe₂ caused by charge-transfer and chemical-doping effect at WSe₂ /Au and WSe₂ /SiO₂ interfaces, respectively, together with the charge-drift effect. These interesting features can be utilized for optoelectronic switching, confirmed by the cyclic PL switching test for a long time exceeding 4000 s. This study offers a universal and reliable approach for the fabrication of exciton-based optoelectronic switches, which would be essential in integrated nanophotonics.

Recent progress in the CVD growth of 2D vertical heterostructures based on transition-metal dichalcogenides

This review summarizes recent advances in the controllable CVD growth of 2D TMDC vertical heterostructures under four different strategies.