Quantitative and Anisotropic Mechanochromism of Polydiacetylene at Nanoscale

A single-particle mechanofluorescent sensor

Monitoring mechanical stresses in microchannels is challenging. Herein, we report the development of a mechanofluorescence sensor system featuring a fluorogenic single polydiacetylene (PDA) particle, fabricated using a co-flow microfluidic method. We construct a stenotic vessel-mimicking capillary channel, in which the hydrodynamically captured PDA particle is subjected to controlled fluid flows. Fluorescence responses of the PDA particle are directly monitored in real time using fluorescent microscopy. The PDA particle displays significant nonlinear fluorescence emissions influenced by fluid viscosity and the presence of nanoparticles and biomolecules in the fluid. This nonlinear response is likely attributed to the torsion energy along the PDA's main chain backbone. Computational fluid dynamic simulations indicate that the complete blue-to-red transition necessitates ~307 μJ, aligning with prior research. We believe this study offers a unique advantage for simulating specific problematic regions of the human body in an in vitro environment, potentially paving the way for future exploration of difficult-to-access areas within the body.

Mechanical Properties of Polydiacetylene Multilayers Studied by AFM Force Spectroscopy

The blue-to-red chromatic phase transition of polydiacetylene (PDA) is accompanied by the twist and rearrangement of its side chains, which results in shortening of the conjugation length in the backbone. However, how these morphological changes affect its mechanical properties remains elusive. In this work, force spectroscopy mapping by atomic force microscopy was employed to quantify mechanical parameters of PDA thin films such as breakthrough force and Young's modulus at the monomer, blue, and red phases during the chromatic transition. We found that the breakthrough force increased by 113% and Young's modulus decreased by 21% during the blue-to-red transition, highlighting that the subtle change in the side-chain configuration has a dramatic impact on its mechanical properties.

Dual Friction Force/Fluorescence Microscopy

Friction force microscopy (FFM) is a mode of atomic force microscopy (AFM) that quantifies both normal and horizontal forces against substrates. Recent improvement in its accuracy at nanonewton ranges and the possibility of combining AFM with fluorescence microscopy enabled the simultaneous characterization by FFM and fluorescence microscopy. This Tutorial describes the operation principle of the dual friction force/fluorescence microscopy setup and highlights its emerging applications in mechanochromic materials.

Imaging of Accumulated Mechanical Stresses Using Self-Assembled Layered Conjugated Polymer

When mechanical stresses, such as tensile, compressive, and frictional stresses, are applied to objects by various motions, they are accumulated in materials. Conventional mechanoresponsive materials and sensors detect one-time applied stress. However, the accumulated stresses are not visualized or measured in previous works. The present study demonstrated imaging and sensing of not only one-time but also accumulated tensile, compressive, and frictional stresses. Polyurethane (PU) film was combined with 2D layered polydiacetylene (PDA), a stimuli-responsive color-changing polymer. PDA generally exhibits no color changes with the application of tensile and compression stresses because the molecular motion leading to the color change is not induced by such mechanical stresses. Here the versatile mechanoresponsiveness was achieved using a block copolymer guest partially intercalated in the layered PDA. As the interlayer and outerlayer segments interact with PDA and PU, respectively, the applied stresses to the film are transferred from PU to PDA via the block copolymer guest. The color changes of the film imaged and quantified the accumulated work depending on the number and strength of the applied multiple stresses such as tensile, compressive, and frictional stresses. The design strategy of materials and methodology of sensing can be applied to the development of new sensors for accumulated mechanical stresses in a wide range of length and strength scales.

Dual Nanofriction Force Microscopy/Fluorescence Microscopy Imaging Reveals the Enhanced Force Sensitivity of Polydiacetylene by pH and NaCl

Polydiacetylene (PDA) is a popular mechanochromic material often used in biosensing. The effect of its headgroup-headgroup interactions on thermochromism such as pH or salt concentration dependency has been extensively studied before; however, their effect on mechanochromism at the nanoscale is left unstudied. In this work, nanofriction force microscopy and fluorescence microscopy were combined to study the effect of pH and ionic strength on the polydiacetylene (PDA) force sensitivity at the nanoscale. We found that the increase in pH from 5.7 to 8.2 caused an 8-fold enhancement in force sensitivity. The elevation of NaCl concentration from 10 to 200 mM also made the PDA 5 times more force-sensitive. These results suggest that the PDA force sensitivity at the nanoscale can be conveniently enhanced by "pre-stimulation" with pH or ionic strength.

A highly sensitive friction-imaging device based on cascading stimuli responsiveness

Imaging and measurement of friction forces are required in a variety of fields. If the friction forces originating from the motions of professionals are quantitatively analyzed, the data can be applied to a motion-copying system by a robot. However, weak friction forces have not been visualized and quantified using conventional sensing materials and devices because of their low sensitivity. Here we present a highly sensitive friction-imaging device based on the cascading responses of stimuli-responsive materials, namely polydiacetylene (PDA) and dry liquid (DL). Weak friction forces disrupt the DL, which is composed of liquid droplets surrounded by solid particles. The outflowing liquid under chemical stress changes the color of PDA. The cascading responses enable colorimetric imaging and measurement of weak friction forces in the range of 0.006-0.080 N. Furthermore, the device visualizes the force distribution of handwriting in calligraphy depending on the individual characteristics of an expert, a practician, and a beginner. A high-sensitivity friction-imaging device can be used to understand various motions.

Colorimetric response in polydiacetylene at the single domain level using hyperspectral microscopy

The structural variance of polydiacetylene (PDA) at the nanoscale level, even under the same fabrication conditions, is one of the origins of its poor reproducibility in chemo/biosensing. In this work, we present a spatial map of such structural distributions within a single crystal by taking advantage of the recent development of hyperspectral microscopy at visible wavelengths. Hyperspectral microscopy provides the distribution of absorption spectra at the spatial resolution of standard optical microscopy. By tracking the blue-to-red transition via this technique, we found that heat or pH stimulation leaves a unique pattern in the transition pathways.

Tracking Mechanical Stress and Cell Migration with Inexpensive Polymer Thin-Film Sensors

Polydiacetylene (PDA) Langmuir films are well known for their blue to red chromatic transitions in response to a variety of stimuli, including UV light, heat, bio-molecule bindings and mechanical stress. In this work, we detail the ability to tune PDA Langmuir films to exhibit discrete chromatic transitions in response to applied mechanical stress. Normal and shear-induced transitions were quantified using the Surface Forces Apparatus and established to be binary and tunable as a function of film formation conditions. Both monomer alkyl tail length and metal cations were used to manipulate the chromatic transition force threshold to enable discrete force sensing from ~50 to ~500 nN μm-2 for normal loading and ~2 to ~40 nN μm-2 for shear-induced transitions, which are appropriate for biological cells. The utility of PDA thin-film sensors was demonstrated with the slime mold Physarum polycephalum. The fluorescence readout of the films enabled: the area explored by Physarum to be visualized, the forces involved in locomotion to be quantified, and revealed novel puncta formation potentially associated with Physarum sampling its environment.

Stimuli-Responsive Sponge for Imaging and Measuring Weak Compression Stresses

Imaging and measuring compression stresses secure a safe and healthy life. Compression stresses in kPa range are not easily detected by conventional mechanoresponsive materials because microscopic molecular motion of the chromophores is not induced by such weak stresses. Moreover, imaging of the stress distribution is not achieved so far. The present study shows a sponge device combining two stimuli-responsive materials, a capsule releasing interior liquid and color-changing polymer in responses to compression stress and chemical stimulus, respectively. The stimuli-responsive capsule is dispersed on a melamine sponge comprised of the fibers with coating the layered polydiacetylene (PDA). The application of weak compression stresses induces collapse of the capsules, outflow of the interior liquid, and subsequent irreversible color change of PDA. The cascading response in the sponge device colorimetrically enables imaging of the distribution and measuring the strength of the compression stresses in kPa range. Furthermore, the device demonstrates imaging and measuring unknown weak compression stresses applied by the irregular-shaped objects. A couple of clinical issues in surgical operation of intestine are studied using the stress-imaging sponge device. The device and its design strategy can be applied to stress imaging in a variety of fields.

Reversible Mechanochromisms via Manipulating Surface Wrinkling

Mechanochromic structural-colored materials have promising applications in various domains. In this Letter, we report three types of reversible mechanochromisms in simple material systems by harnessing mechano-responsive wrinkling dynamics including (i) brightness mechanochromism (BM), (ii) hue change mechanochromism (HCM), and (iii) viewable angle mechanochromism (VAM). Upon stretching, the BM device exhibits almost a constant hue but reduces light brightness due to the postbuckling mechanics-controlled deformation, while the HCM device can change the hue from blue to red with almost constant intensity because of the linear elastic mechanics-controlled deformation. The VAM device shows a constant hue because of the thin film interference effect. However, the viewable angles decrease with increasing applied strain owing to the light scattering of wrinkles. All of the mechanochromic behaviors exhibit good reversibility and durability. We clearly elucidated the underlying mechanisms for different mechanochromisms and demonstrated their potential applications in smart displays, stretchable strain sensors, and antipeeping/anticounterfeiting devices.

Recent progress in polydiacetylene mechanochromism

Polydiacetylenes (PDAs) are a family of mechanochromic polymers that change color from blue to red and emit fluorescence when exposed to external stimuli, making them extremely popular materials in biosensing. Although several informative reviews on PDA biosensing have been reported in the last few years, their mechanochromism, where external forces induce the color transition, has not been reviewed for a long time. This mini review summarizes recent progress in PDA mechanochromism, with a special focus on the quantitative and nanoscopic data that have emerged in recent years.

Enhanced mechano-responsive fluorescence in polydiacetylene thin films through functionalization with tetrazine dyes: photopolymerization, energy transfer and AFM coupled to fluorescence microscopy studies

The development of mechano-responsive fluorescent materials is essential for the design and construction of reliable and versatile sensors for mechanical stress. Herein, novel energy transfer-based systems with tetrazine fluorophore and a polydiacetylene (PDA) backbone are synthesized and studied comparatively to a simple polydiacetylene in the form of thin films. Their photopolymerization properties, energy transfer efficiencies and fluorescent response to nanoscale mechanical stimulation are assessed. It is pointed out that the self-assembling group on the PDA chain influences the geometrical arrangement of the chains and the film morphology and, as a consequence, the efficiency and kinetics of polymerization and the energy transfer efficiency. Moreover, we show that the strategy of introducing tetrazine fluorophore provides a new effective route of improving force detectability by fluorescence using polydiacetylenes as mechano-responsive units.

Analysis of PDA Dose Curves for the Extraction of Antimicrobial Peptide Properties

A mechanochromic polymer, polydiacetylene, changes color upon ligand binding, being a popular material in biosensing. However, whether it can also detect ligand functions in addition to binding is left understudied. In this work, we report that the polydiacetylene can be used to determine the net charges and the mode of actions (carpet model, toroidal pore model, etc.) of antimicrobial peptides and detergents via EC₅₀ and Hill coefficients from the colorimetric response-dose curves. This opens a potential for high-throughput peptide screening by functions, which is difficult with the conventional methods.

In Situ Exploration of Stimulus-Induced Emission Changes in Mechanochromic Dyes

The development of in situ analysis techniques for visualizing and linking macro- and nanoscopic features of external stimulus-responsive materials is crucial for their rational design and applications. Herein, we investigate the mechanical stress-induced emission changes in electron donor-acceptor type organic dye molecules in solid states through in situ single-particle fluorescence spectroscopy combined with macroscopic and nanoscopic stimulation systems. The change in emission color from green to yellow was attributed to repeated rubbing or scratching of the crystal surface, and not to simple cutting. This change was due to partial amorphization, which changed the intra- and intermolecular charge-transfer interactions of stacked molecules near the surface. We believe that this study will facilitate the efficient design of mechano-responsive materials with finely controlled and responsive properties.